Some APs misbehave when TWT is used and cause our firmware to crash.
We don't know a reasonable way to detect and work around this problem
in the FW yet.  To prevent these crashes, disable TWT in the driver by
stopping to advertise TWT support.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=215523Signed-off-by: NGolan Ben Ami <golan.ben.ami@intel.com>
[reworded the commit message]
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/20220301072926.153969-1-luca@coelho.fiSigned-off-by: NJohannes Berg <johannes.berg@intel.com>

If no firmware was present at all (or, presumably, all of the
firmware files failed to parse), we end up unbinding by calling
device_release_driver(), which calls remove(), which then in
iwlwifi calls iwl_drv_stop(), freeing the 'drv' struct. However
the new code I added will still erroneously access it after it
was freed.

Set 'failure=false' in this case to avoid the access, all data
was already freed anyway.

Cc: stable@vger.kernel.org
Reported-by: NStefan Agner <stefan@agner.ch>
Reported-by: NWolfgang Walter <linux@stwm.de>
Reported-by: NJason Self <jason@bluehome.net>
Reported-by: NDominik Behr <dominik@dominikbehr.com>
Reported-by: NMarek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Fixes: ab07506b ("iwlwifi: fix leaks/bad data after failed firmware load")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20220208114728.e6b514cf4c85.Iffb575ca2a623d7859b542c33b2a507d01554251@changeid

SAR GEO offsets are not supported on 3160 devices.  The code was
refactored and caused us to start sending the command anyway, which
causes a FW assertion failure.  Fix that only considering this feature
supported on FW API with major version is 17 if the device is not
3160.

Additionally, fix the caller of iwl_mvm_sar_geo_init() so that it
checks for the return value, which it was ignoring.
Reported-by: NLen Brown <lenb@kernel.org>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Fixes: 78a19d52 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128144623.96f683a89b42.I14e2985bfd7ddd8a8d83eb1869b800c0e7f30db4@changeid

This feature has been deprecated and should not be used anymore.  With
newer firmwares, namely *-67.ucode and above, trying to use it causes an
assertion failure in the FW, similar to this:

[Tue Jan 11 20:05:24 2022] iwlwifi 0000:04:00.0: 0x00001062 | ADVANCED_SYSASSERT

In order to prevent this feature from being used, remove it entirely
and get rid of the Kconfig option that
enables it (IWLWIFI_BCAST_FILTERING).

Fixes: cbaa6aee ("iwlwifi: bump FW API to 67 for AX devices")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215488
Cc: stable@vger.kernel.org # 5.16.x
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128144623.9241e049f13e.Ia4f282813ca2ddd24c13427823519113f2bbebf2@changeid

When we register and we are in link protection passive, meaning
that the host can't touch the device, report RFKILL immediately
upon register() and don't wait for the CSME firmware to let us
know again about the link protection state.

What happens if we wait is that the host will not see RFKILL soon
enough and we'll have a window of time during which it can bring
up the device which will request ownership.

Fixes: 2da4366f ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.a136f9f46336.Ief7506dc3b1813a1943a5a639aa45d8e5f284f31@changeid

iwlmei can trigger a hardware RFKILL when the CSME firmware
does not want the host to touch the device.
But then, iwlmvm reports RFKILL which makes cfg80211 update
iwlmvm about RFKILL. iwlmvm then thinks there is a change in
the _software_ rfkill and it calls rfkill_blocked() to fetch
the RFKILL state. This returns that RFKILL is blocked (because
of iwlmei) and iwlmvm tells iwlmei that _software_ RFKILL is
asserted.

This is a bug of course.
Fix this by checking explicitly the software RFKILL state and
not the overall RFKILL state.

Fixes: 7ce1f215 ("iwlwifi: mvm: read the rfkill state and feed it to iwlmei")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 7ce1f215 ("iwlwifi: mvm: read the rfkill state and feed it to iwlmei")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.f293861a3f92.I9553d27df1de6fd5756a43ea5f8b89d06fa1a6f2@changeid

The shared area is a DMA memory allocated in the host and
mapped so that the host and the CSME firmware can
exchange data. It is mapped through a dedicated PCI device
that is driven by the mei bus driver.

The bus driver is in charge of allocating and mapping this
memory. It also needs to configure the CSME firmware with
a specific set of commands, so that the CSME firmware will
know that this memory is meant to be used by its internal
WLAN module.

For this, the CSME firmware first needs to completely
initialize its WLAN module and only then get the mapping
request.

The problem is that the mei bus enumeration completes
before the WLAN is completely ready. This means that
the WLAN module's initialization is racing with iwlmei's
allocation and mapping flow.

Testing showed a problem in resume flows where iwlmei
was too fast and the DMA mapping failed.

Add a retry mechanism to make sure that we will succeed
to map the memory.

Fixes: 2da4366f ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Fixes: bcbddc4f ("iwlwifi: mei: wait before mapping the shared area")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.cc51e6a6d635.I4b74a082eb8d89f9e4f556a27c4339c15444dc6c@changeid

The check makes sure that we can look at the ip header.
We first need to check that the basic ip header (20 bytes)
can be pulled before we look at the field that will teach
us how long is the ip header. This is why there are two
checks.

The second check was wrong and smatch pointed that
sizeof(ip_hdrlen(skb) - sizeof(*iphdr)) can't be right.

Looking at the code again made me think that we really
need ip_hdrlen(skb) since we want to make sure all the
IP header is in the buffer header. This will allow us
to set the transport offset and from there to look
at the transport header (TCP / UDP).
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Fixes: 2da4366f ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.6d9fcf82691e.I449b1e21c5b5478f2ac218522570479918f49f9d@changeid

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this in the gen2 code as well.

Fixes: eda50cde ("iwlwifi: pcie: add context information support")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.b8b0dfce16ef.Ie20f0f7b23e5911350a2766524300d2915e7b677@changeid

If we run into this error path, we shouldn't unlock the mutex
since it's not locked since. Fix this.

Fixes: a6bd005f ("iwlwifi: pcie: fix RF-Kill vs. firmware load race")
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5d16821d1433.Id259699ddf9806459856d6aefbdbe54477aecffd@changeid

There are a couple of bugs in this function:

1. It is declared as a non-static function, even though
   it's only used in one file.
2. Its return value should be of type u32 but it returns
   (in some cases) -1.

Fix them by making this function static and returning an
error value of type unsigned.

In addition, we're assigning the return value of this function
as the legacy rate even if the function returned an error value.
Fix this by assigning the lowest rate in this case.
Signed-off-by: NMiri Korenblit <miriam.rachel.korenblit@intel.com>
Reported-by: NYe Guojin <ye.guojin@zte.com.cn>
Reported-by: NZeal Robot <zealci@zte.com.cn>
Fixes: 9998f81e ("iwlwifi: mvm: convert old rate & flags to the new format.")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.5612eeb9d6d0.I992e10d93fc22919b2bc42daad087ee1b5d6f014@changeid

We're checking the FW version of TX_CMD in order to decide whether to
convert rate_n_flags from the old format to the new one.  If the API
is smaller or equal to 6 we should convert it.  Currently we're
converting if the API version is greater than 6. Fix it.
Signed-off-by: NMiri Korenblit <miriam.rachel.korenblit@intel.com>
Fixes: dc52fac3 ("iwlwifi: mvm: Support new TX_RSP and COMPRESSED_BA_RES versions")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Signed-off-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/iwlwifi.20220128142706.a264ac51d106.I228ba1317cdcbfef931c09d280d701fcad9048d2@changeid

When building ARCH=arm allmodconfig:

drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c: In function ‘iwl_mvm_ftm_rtt_smoothing’:
./include/asm-generic/div64.h:222:35: error: comparison of distinct pointer types lacks a cast [-Werror]
  222 |         (void)(((typeof((n)) *)0) == ((uint64_t *)0));  \
      |                                   ^~
drivers/net/wireless/intel/iwlwifi/mvm/ftm-initiator.c:1070:9: note: in expansion of macro ‘do_div’
 1070 |         do_div(rtt_avg, 100);
      |         ^~~~~~

do_div() has to be used with an unsigned 64-bit integer dividend but
rtt_avg is a signed 64-bit integer.

div_s64() expects a signed 64-bit integer dividend and signed 32-bit
divisor, which fits this scenario, so use that function here to fix the
warning.

Fixes: 8b0f9254 ("iwlwifi: mvm: fix 32-bit build in FTM")
Signed-off-by: NNathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20211227191757.2354329-1-nathan@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

Commit d068ca2a ("codel: split into multiple files") moved all
Qdisc-related code to codel_qdisc.h, move the include of pkt_sched.h
as well.

This is similar to the previous commit, although we don't care as
much about incremental builds after pkt_sched.h was touched itself
it is included by net/sch_generic.h which is modified ~20 times
a year.

This decreases the incremental build size after touching pkt_sched.h
from 1592 to 617 objects.

Fix unmasked missing includes in WiFi drivers.
Acked-by: NKalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20211221193941.3805147-2-kuba@kernel.orgSigned-off-by: NJakub Kicinski <kuba@kernel.org>

The shared area is a DMA memory allocated in the host and
mapped so that the host and the CSME firmware can
exchange data. It is mapped through a dedicated PCI device
that is driven by the mei bus driver.

The bus driver is in charge of allocating and mapping this
memory. It also needs to configure the CSME firmware with
a specific set of commands, so that the CSME firmware will
know that this memory is meant to be used by its internal
WLAN module.

For this, the CSME firmware first needs to completely
initialize its WLAN module and only then get the mapping
request.

The problem is that the mei bus enumeration completes
before the WLAN is completely ready. This means that
the WLAN module's initialization is racing with iwlmei's
allocation and mapping flow.

Testing showed a problem in resume flows where iwlmei
was too fast and the DMA mapping failed.

Add a delay to avoid this. This is still racy, but our
measurements showed that we have a good margin and we
should now be safe.

Fixes: 2da4366f ("iwlwifi: mei: add the driver to allow cooperation with CSME")
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211220142940.8b6279e3d0be.I6fe128b0b86149a85535104822c8355b367887c8@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

When the driver is unregistered, CSME will take ownership on the
device. Reflect this in the iwlmei object so that we will remember
to re-ask for ownership when the driver will register again.

Not doing so will cause CSME not to give the host ownership and
we will see the following error message when trying to bring up
the interface:

iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw iwl_trans_prepare_card_hw enter
iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready
iwlwifi 0000:a9:00.0: iwl_pcie_set_hw_ready hardware not ready
iwlwifi 0000:a9:00.0: iwl_pcie_prepare_card_hw Couldn't prepare the card but SAP is connected
iwlwifi 0000:a9:00.0: Error while preparing HW: -16
Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211220142940.c7bb5b7644df.I48498d9fd6e3959562205af67aa5f1a822eb762d@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

NIC has been grabbed for reading twice which is leading
to NIC hang. Code correction are done for reading data with
no grab function.
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.55527214f8c9.I1748215ccb3fa20a3491a46a49b12e04eb560ac6@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Some devices also use iwl_scan_config_v2 struct, so link it in
the documentation for SCAN_CFG_CMD. Fix a bunch of kernel-doc
as well.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.3331df94b106.If6c96b0d386e1c5988c8da6b69257e8f2e737f07@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In some rare cases when the HW is in a bad state, we may get this
interrupt when prph_info is not set yet.  Then we will try to
dereference it to check the sleep_notif element, which will cause an
oops.

Fix that by ignoring the interrupt if prph_info is not set yet.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.0537aa562313.I183bb336345b9b3da196ba9e596a6f189fbcbd09@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

This notification ID was actually used for something else we
never implemented, but luckily we only had some debug code
here. Just remove it.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.a67b5b9db259.Ic55b306fcd2a3525b3993f4b7e00622dd95053ba@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

There's little value in this warning, we get a warning here
if firmware passes us a short packet, particularly in monitor
mode.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.305d12cf51ac.I2e4e6874113b1e5d8ee467b8a2d90820cc6ddde9@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

When IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD is set, removing a time event
always tries to cancel session protection. However, AUX ROC does
not use session protection so it was never removed. As a result,
if the driver tries to allocate another AUX ROC event right after
cancelling the first one, it will fail with a warning.
In addition, the time event data passed to iwl_mvm_remove_aux_roc_te()
is incorrect. Fix it.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.915e1f69f062.Id837e917f1c2beaca7c1eb33333d622548918a76@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Currently we always return the op_mode with valid pointer in case
getting NVM failed, while it's only relevant for cases that CSME is the
owner of the nic.

Fix this by checking also who's the owner of the nic.
Signed-off-by: NMordechay Goodstein <mordechay.goodstein@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.b1e96021b616.Id0164855f2dd01ecdecf79b239d6ee5974882245@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Support TX checksum offload for Bz devices, where we have full
checksum offload (NETIF_F_HW_CSUM) and the hardware doesn't
need to parse the IP headers or anything.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.c0f44c98b36d.I75a688f3ac80cbe824c459ece4bb67843b9fce76@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

If OEM isn't in the allowed list, TAS should be disabled in US/CA.
Currently, if the OEM isn't allowed - we're sending the TAS only
if we are not in US or CA.
But this country check is done before we even know the country
(usually the configuration is ZZ in that stage).
So do the following instead:
1. Check if the current OEM is in the allowed list
2. If not - add US and CA to tas_block_list_array
3. Send the TAS table to FW.
Signed-off-by: NMiri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>

Set scan offload profiles auth algorithms with valid
algorithms only.
Signed-off-by: NAyala Beker <ayala.beker@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.525f2d468d22.I4d497d6a0a14ffb833f7edc7e980d26bbf8d7527@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Don't use protected ranging negotiation for FTM ranging as responders
that support only FTM ranging don't expect the FTM request to be
protected.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Fixes: 517a5eb9 ("iwlwifi: mvm: when associated with PMF, use protected NDP ranging negotiation")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.f50ed0e3c6b3.Ibff247ee9d4e6e0a1a2d08a3c8a4bbb37e6829dd@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

add killer subsystem devices from the 1675i and 1675s family
to the driver.
Signed-off-by: NYaara Baruch <yaara.baruch@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219132536.2d5bec2d7b68.Icffb4e27390e6a5c76a0cbe7abf7472558f323d6@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The 6GHz passive scan is performed only once every 50 minutes.
However, in case of suspend/resume, the regulatory information
is reset, so 6GHz channels may become disabled.
Fix it by performing a 6GHz passive scan within 60 seconds after
suspend/resume even if the 50 minutes timeout did not expire yet.
Signed-off-by: NAvraham Stern <avraham.stern@intel.com>
Fixes: e8fe3b41 ("iwlwifi: mvm: Add support for 6GHz passive scan")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.6d5c043372cf.I251dd5618a3f0b8febbcca788eb861f1cd6039bc@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In case of forced passive scan on a UHB channel,
don't set the direct probe option for this channel.
Signed-off-by: NAyala Beker <ayala.beker@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0ede76a9ca92.Ie64a4df79ea9c485ae3d2fc043319e8f79cefa8e@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In case of a conflict between BIOS version and FW
version of the PPAG table - the values arrive in the FW in the wrong
places. This happens because we're storing the table in different
structures depending on the BIOS version, not on the FW version,
and so the FW doesn't get what it expect to.
Always store the table in a v2 structure (which is a superset
of v1 and v0).

Also store the table in a structured way and in it's own structure,
rather then storing it in the ppag command structure, similarly to
the WRDS, EWRD and WGDS tables.
Signed-off-by: NMiri Korenblit <miriam.rachel.korenblit@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.793a509da7bd.Ia176746a28b816b5f788cce9a281139735909e2a@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Start supporting API version 69 for AX devices.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.7d8fe0dffaea.I2de65c1efd9ab464d4158a3d852f73efe63024f8@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The RADA might include in the Rx frame the MIC and CRC bytes.
These bytes should be removed for non monitor interfaces and
should not be passed to mac80211.

Fix the Rx processing to remove the extra bytes on non monitor
cases.
Signed-off-by: NIlan Peer <ilan.peer@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.098be12c801e.I1d81733d8a75b84c3b20eb6e0d14ab3405ca6a86@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

In some cases the sta is being removed twice since we do not test the
roc aux running before removing it. Start looking at the bit before
removing the sta.
Signed-off-by: NNathan Errera <nathan.errera@intel.com>
Fixes: 2c2c3647 ("iwlwifi: mvm: support ADD_STA_CMD_API_S ver 12")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d5376ac6bcb0.Ic5f8470ea60c072bde9d1503e5f528b65e301e20@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

The FW API for PER_CHAIN_LIMIT_OFFSET_CMD is misleading.  The element
name is table_rev, but it shouldn't actually contain the table
revision number, but whether we should use the South Korea scheme or
not.

Fix the driver so that we only set this value to either 0 or 1.  It
will only be 1 (meaning South Korea) if the ACPI WGDS table revision
is 1.
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Fixes: 664c011b ("iwlwifi: acpi: support reading and storing WGDS revision 2")
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.abed3b8119c7.I1fdc2c14577523fcffdfe8fb5902c2d8efde7e09@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Support resetting the firmware via TLV-based debugging.  When applied,
this will cause the driver to reset the firmware when the debugging
is triggered.
Signed-off-by: NMukesh Sisodiya <mukesh.sisodiya@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.d59b29653a1e.I7b3be4a1ad1a9d5d0e86259740e89ac113c9348b@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

Increment the threshold to avoid dropping too eagerly.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.0e947ed458c4.Ia376cbea5f59df4b4474f0bd33ab033e84535cce@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

We don't really have much reason to mistrust the hardware
queue number, but if it gets mixed up we still don't want
to access some data out of bounds, so drop such frames.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.539aecb91247.I6e555a5185bad30d7d1a4659f9c0b99325425f18@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

On Bz devices, the hardware checksums including the SNAP header,
starting directly after the MAC header, so we don't need the
extra checks and can just pass the checksum to mac80211.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.8ef59da4e05e.Ide87c2dc8fa08eae55c013a625f4ece5184b1b63@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>

For the upcoming Bz devices, we will set NETIF_F_HW_CSUM instead
of NETIF_F_IP_CSUM and NETIF_F_IPV6_CSUM. However, we still need
to be able to remove all the checksum bits, so add a mask for the
removal, and keep the old define for the feature advertisement.
Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20211219121514.f05488ce8b83.I65bb83721498d8433e4ee2b09415eb74ab579445@changeidSigned-off-by: NLuca Coelho <luciano.coelho@intel.com>