1. 13 12月, 2005 1 次提交
  2. 29 11月, 2005 1 次提交
  3. 23 11月, 2005 2 次提交
    • H
      [PATCH] unpaged: fix sound Bad page states · f3d48f03
      Hugh Dickins 提交于
      Earlier I unifdefed PageCompound, so that snd_pcm_mmap_control_nopage and
      others can give out a 0-order component of a higher-order page, which won't
      be mistakenly freed when zap_pte_range unmaps it.  But many Bad page states
      reported a PG_reserved was freed after all: I had missed that we need to
      say __GFP_COMP to get compound page behaviour.
      
      Some of these higher-order pages are allocated by snd_malloc_pages, some by
      snd_malloc_dev_pages; or if SBUS, by sbus_alloc_consistent - but that has
      no gfp arg, so add __GFP_COMP into its sparc32/64 implementations.
      
      I'm still rather puzzled that DRM seems not to need a similar change.
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      f3d48f03
    • H
      [PATCH] unpaged: VM_UNPAGED · 0b14c179
      Hugh Dickins 提交于
      Although we tend to associate VM_RESERVED with remap_pfn_range, quite a few
      drivers set VM_RESERVED on areas which are then populated by nopage.  The
      PageReserved removal in 2.6.15-rc1 changed VM_RESERVED not to free pages in
      zap_pte_range, without changing those drivers not to set it: so their pages
      just leak away.
      
      Let's not change miscellaneous drivers now: introduce VM_UNPAGED at the core,
      to flag the special areas where the ptes may have no struct page, or if they
      have then it's not to be touched.  Replace most instances of VM_RESERVED in
      core mm by VM_UNPAGED.  Force it on in remap_pfn_range, and the sparc and
      sparc64 io_remap_pfn_range.
      
      Revert addition of VM_RESERVED to powerpc vdso, it's not needed there.  Is it
      needed anywhere?  It still governs the mm->reserved_vm statistic, and special
      vmas not to be merged, and areas not to be core dumped; but could probably be
      eliminated later (the drivers are probably specifying it because in 2.4 it
      kept swapout off the vma, but in 2.6 we work from the LRU, which these pages
      don't get on).
      
      Use the VM_SHM slot for VM_UNPAGED, and define VM_SHM to 0: it serves no
      purpose whatsoever, and should be removed from drivers when we clean up.
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Acked-by: NWilliam Irwin <wli@holomorphy.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      0b14c179
  4. 14 11月, 2005 3 次提交
  5. 10 11月, 2005 1 次提交
  6. 09 11月, 2005 2 次提交
    • N
      [PATCH] sched: resched and cpu_idle rework · 64c7c8f8
      Nick Piggin 提交于
      Make some changes to the NEED_RESCHED and POLLING_NRFLAG to reduce
      confusion, and make their semantics rigid.  Improves efficiency of
      resched_task and some cpu_idle routines.
      
      * In resched_task:
      - TIF_NEED_RESCHED is only cleared with the task's runqueue lock held,
        and as we hold it during resched_task, then there is no need for an
        atomic test and set there. The only other time this should be set is
        when the task's quantum expires, in the timer interrupt - this is
        protected against because the rq lock is irq-safe.
      
      - If TIF_NEED_RESCHED is set, then we don't need to do anything. It
        won't get unset until the task get's schedule()d off.
      
      - If we are running on the same CPU as the task we resched, then set
        TIF_NEED_RESCHED and no further action is required.
      
      - If we are running on another CPU, and TIF_POLLING_NRFLAG is *not* set
        after TIF_NEED_RESCHED has been set, then we need to send an IPI.
      
      Using these rules, we are able to remove the test and set operation in
      resched_task, and make clear the previously vague semantics of
      POLLING_NRFLAG.
      
      * In idle routines:
      - Enter cpu_idle with preempt disabled. When the need_resched() condition
        becomes true, explicitly call schedule(). This makes things a bit clearer
        (IMO), but haven't updated all architectures yet.
      
      - Many do a test and clear of TIF_NEED_RESCHED for some reason. According
        to the resched_task rules, this isn't needed (and actually breaks the
        assumption that TIF_NEED_RESCHED is only cleared with the runqueue lock
        held). So remove that. Generally one less locked memory op when switching
        to the idle thread.
      
      - Many idle routines clear TIF_POLLING_NRFLAG, and only set it in the inner
        most polling idle loops. The above resched_task semantics allow it to be
        set until before the last time need_resched() is checked before going into
        a halt requiring interrupt wakeup.
      
        Many idle routines simply never enter such a halt, and so POLLING_NRFLAG
        can be always left set, completely eliminating resched IPIs when rescheduling
        the idle task.
      
        POLLING_NRFLAG width can be increased, to reduce the chance of resched IPIs.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Cc: Ingo Molnar <mingo@elte.hu>
      Cc: Con Kolivas <kernel@kolivas.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      64c7c8f8
    • N
      [PATCH] sched: disable preempt in idle tasks · 5bfb5d69
      Nick Piggin 提交于
      Run idle threads with preempt disabled.
      
      Also corrected a bugs in arm26's cpu_idle (make it actually call schedule()).
      How did it ever work before?
      
      Might fix the CPU hotplugging hang which Nigel Cunningham noted.
      
      We think the bug hits if the idle thread is preempted after checking
      need_resched() and before going to sleep, then the CPU offlined.
      
      After calling stop_machine_run, the CPU eventually returns from preemption and
      into the idle thread and goes to sleep.  The CPU will continue executing
      previous idle and have no chance to call play_dead.
      
      By disabling preemption until we are ready to explicitly schedule, this bug is
      fixed and the idle threads generally become more robust.
      
      From: alexs <ashepard@u.washington.edu>
      
        PPC build fix
      
      From: Yoichi Yuasa <yuasa@hh.iij4u.or.jp>
      
        MIPS build fix
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      Signed-off-by: NYoichi Yuasa <yuasa@hh.iij4u.or.jp>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      5bfb5d69
  7. 08 11月, 2005 2 次提交
  8. 31 10月, 2005 2 次提交
  9. 30 10月, 2005 2 次提交
    • H
      [PATCH] mm: arches skip ptlock · b462705a
      Hugh Dickins 提交于
      Convert those few architectures which are calling pud_alloc, pmd_alloc,
      pte_alloc_map on a user mm, not to take the page_table_lock first, nor drop it
      after.  Each of these can continue to use pte_alloc_map, no need to change
      over to pte_alloc_map_lock, they're neither racy nor swappable.
      
      In the sparc64 io_remap_pfn_range, flush_tlb_range then falls outside of the
      page_table_lock: that's okay, on sparc64 it's like flush_tlb_mm, and that has
      always been called from outside of page_table_lock in dup_mmap.
      Signed-off-by: NHugh Dickins <hugh@veritas.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      b462705a
    • N
      [PATCH] core remove PageReserved · b5810039
      Nick Piggin 提交于
      Remove PageReserved() calls from core code by tightening VM_RESERVED
      handling in mm/ to cover PageReserved functionality.
      
      PageReserved special casing is removed from get_page and put_page.
      
      All setting and clearing of PageReserved is retained, and it is now flagged
      in the page_alloc checks to help ensure we don't introduce any refcount
      based freeing of Reserved pages.
      
      MAP_PRIVATE, PROT_WRITE of VM_RESERVED regions is tentatively being
      deprecated.  We never completely handled it correctly anyway, and is be
      reintroduced in future if required (Hugh has a proof of concept).
      
      Once PageReserved() calls are removed from kernel/power/swsusp.c, and all
      arch/ and driver code, the Set and Clear calls, and the PG_reserved bit can
      be trivially removed.
      
      Last real user of PageReserved is swsusp, which uses PageReserved to
      determine whether a struct page points to valid memory or not.  This still
      needs to be addressed (a generic page_is_ram() should work).
      
      A last caveat: the ZERO_PAGE is now refcounted and managed with rmap (and
      thus mapcounted and count towards shared rss).  These writes to the struct
      page could cause excessive cacheline bouncing on big systems.  There are a
      number of ways this could be addressed if it is an issue.
      Signed-off-by: NNick Piggin <npiggin@suse.de>
      
      Refcount bug fix for filemap_xip.c
      Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      b5810039
  10. 11 10月, 2005 1 次提交
  11. 07 10月, 2005 1 次提交
  12. 06 10月, 2005 1 次提交
  13. 04 10月, 2005 1 次提交
  14. 29 9月, 2005 1 次提交
  15. 12 9月, 2005 1 次提交
  16. 11 9月, 2005 1 次提交
    • I
      [PATCH] spinlock consolidation · fb1c8f93
      Ingo Molnar 提交于
      This patch (written by me and also containing many suggestions of Arjan van
      de Ven) does a major cleanup of the spinlock code.  It does the following
      things:
      
       - consolidates and enhances the spinlock/rwlock debugging code
      
       - simplifies the asm/spinlock.h files
      
       - encapsulates the raw spinlock type and moves generic spinlock
         features (such as ->break_lock) into the generic code.
      
       - cleans up the spinlock code hierarchy to get rid of the spaghetti.
      
      Most notably there's now only a single variant of the debugging code,
      located in lib/spinlock_debug.c.  (previously we had one SMP debugging
      variant per architecture, plus a separate generic one for UP builds)
      
      Also, i've enhanced the rwlock debugging facility, it will now track
      write-owners.  There is new spinlock-owner/CPU-tracking on SMP builds too.
      All locks have lockup detection now, which will work for both soft and hard
      spin/rwlock lockups.
      
      The arch-level include files now only contain the minimally necessary
      subset of the spinlock code - all the rest that can be generalized now
      lives in the generic headers:
      
       include/asm-i386/spinlock_types.h       |   16
       include/asm-x86_64/spinlock_types.h     |   16
      
      I have also split up the various spinlock variants into separate files,
      making it easier to see which does what. The new layout is:
      
         SMP                         |  UP
         ----------------------------|-----------------------------------
         asm/spinlock_types_smp.h    |  linux/spinlock_types_up.h
         linux/spinlock_types.h      |  linux/spinlock_types.h
         asm/spinlock_smp.h          |  linux/spinlock_up.h
         linux/spinlock_api_smp.h    |  linux/spinlock_api_up.h
         linux/spinlock.h            |  linux/spinlock.h
      
      /*
       * here's the role of the various spinlock/rwlock related include files:
       *
       * on SMP builds:
       *
       *  asm/spinlock_types.h: contains the raw_spinlock_t/raw_rwlock_t and the
       *                        initializers
       *
       *  linux/spinlock_types.h:
       *                        defines the generic type and initializers
       *
       *  asm/spinlock.h:       contains the __raw_spin_*()/etc. lowlevel
       *                        implementations, mostly inline assembly code
       *
       *   (also included on UP-debug builds:)
       *
       *  linux/spinlock_api_smp.h:
       *                        contains the prototypes for the _spin_*() APIs.
       *
       *  linux/spinlock.h:     builds the final spin_*() APIs.
       *
       * on UP builds:
       *
       *  linux/spinlock_type_up.h:
       *                        contains the generic, simplified UP spinlock type.
       *                        (which is an empty structure on non-debug builds)
       *
       *  linux/spinlock_types.h:
       *                        defines the generic type and initializers
       *
       *  linux/spinlock_up.h:
       *                        contains the __raw_spin_*()/etc. version of UP
       *                        builds. (which are NOPs on non-debug, non-preempt
       *                        builds)
       *
       *   (included on UP-non-debug builds:)
       *
       *  linux/spinlock_api_up.h:
       *                        builds the _spin_*() APIs.
       *
       *  linux/spinlock.h:     builds the final spin_*() APIs.
       */
      
      All SMP and UP architectures are converted by this patch.
      
      arm, i386, ia64, ppc, ppc64, s390/s390x, x64 was build-tested via
      crosscompilers.  m32r, mips, sh, sparc, have not been tested yet, but should
      be mostly fine.
      
      From: Grant Grundler <grundler@parisc-linux.org>
      
        Booted and lightly tested on a500-44 (64-bit, SMP kernel, dual CPU).
        Builds 32-bit SMP kernel (not booted or tested).  I did not try to build
        non-SMP kernels.  That should be trivial to fix up later if necessary.
      
        I converted bit ops atomic_hash lock to raw_spinlock_t.  Doing so avoids
        some ugly nesting of linux/*.h and asm/*.h files.  Those particular locks
        are well tested and contained entirely inside arch specific code.  I do NOT
        expect any new issues to arise with them.
      
       If someone does ever need to use debug/metrics with them, then they will
        need to unravel this hairball between spinlocks, atomic ops, and bit ops
        that exist only because parisc has exactly one atomic instruction: LDCW
        (load and clear word).
      
      From: "Luck, Tony" <tony.luck@intel.com>
      
         ia64 fix
      Signed-off-by: NIngo Molnar <mingo@elte.hu>
      Signed-off-by: NArjan van de Ven <arjanv@infradead.org>
      Signed-off-by: NGrant Grundler <grundler@parisc-linux.org>
      Cc: Matthew Wilcox <willy@debian.org>
      Signed-off-by: NHirokazu Takata <takata@linux-m32r.org>
      Signed-off-by: NMikael Pettersson <mikpe@csd.uu.se>
      Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      fb1c8f93
  17. 10 9月, 2005 2 次提交
  18. 08 9月, 2005 2 次提交
    • V
      [PATCH] Kconfig fix (BLK_DEV_FD dependencies) · a08b6b79
      viro@ZenIV.linux.org.uk 提交于
      Sanitized and fixed floppy dependencies: split the messy dependencies for
      BLK_DEV_FD by introducing a new symbol (ARCH_MAY_HAVE_PC_FDC), making
      BLK_DEV_FD depend on that one and taking declarations of ARCH_MAY_HAVE_PC_FDC
      to arch/*/Kconfig.  While we are at it, fixed several obvious cases when
      BLK_DEV_FD should have been excluded (architectures lacking asm/floppy.h
      are *not* going to have floppy.c compile, let alone work).
      
      If you can come up with better name for that ("this architecture might
      have working PC-compatible floppy disk controller"), you are more than
      welcome - just s/ARCH_MAY_HAVE_PC_FDC/your_prefered_name/g in the patch
      below...
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      a08b6b79
    • J
      [PATCH] NTP: ntp-helper functions · b149ee22
      john stultz 提交于
      This patch cleans up a commonly repeated set of changes to the NTP state
      variables by adding two helper inline functions:
      
      ntp_clear(): Clears the ntp state variables
      
      ntp_synced(): Returns 1 if the system is synced with a time server.
      
      This was compile tested for alpha, arm, i386, x86-64, ppc64, s390, sparc,
      sparc64.
      Signed-off-by: NJohn Stultz <johnstul@us.ibm.com>
      Signed-off-by: NAndrew Morton <akpm@osdl.org>
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      b149ee22
  19. 02 9月, 2005 1 次提交
  20. 30 8月, 2005 2 次提交
    • K
      [SPARC]: remove use of asm/segment.h · ca7c8d2c
      Kumar Gala 提交于
      Removed sparc architecture specific users of asm/segment.h and
      asm-sparc/segment.h itself
      Signed-off-by: NKumar Gala <kumar.gala@freescale.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ca7c8d2c
    • S
      [PATCH] convert signal handling of NODEFER to act like other Unix boxes. · 69be8f18
      Steven Rostedt 提交于
      It has been reported that the way Linux handles NODEFER for signals is
      not consistent with the way other Unix boxes handle it.  I've written a
      program to test the behavior of how this flag affects signals and had
      several reports from people who ran this on various Unix boxes,
      confirming that Linux seems to be unique on the way this is handled.
      
      The way NODEFER affects signals on other Unix boxes is as follows:
      
      1) If NODEFER is set, other signals in sa_mask are still blocked.
      
      2) If NODEFER is set and the signal is in sa_mask, then the signal is
      still blocked. (Note: this is the behavior of all tested but Linux _and_
      NetBSD 2.0 *).
      
      The way NODEFER affects signals on Linux:
      
      1) If NODEFER is set, other signals are _not_ blocked regardless of
      sa_mask (Even NetBSD doesn't do this).
      
      2) If NODEFER is set and the signal is in sa_mask, then the signal being
      handled is not blocked.
      
      The patch converts signal handling in all current Linux architectures to
      the way most Unix boxes work.
      
      Unix boxes that were tested:  DU4, AIX 5.2, Irix 6.5, NetBSD 2.0, SFU
      3.5 on WinXP, AIX 5.3, Mac OSX, and of course Linux 2.6.13-rcX.
      
      * NetBSD was the only other Unix to behave like Linux on point #2. The
      main concern was brought up by point #1 which even NetBSD isn't like
      Linux.  So with this patch, we leave NetBSD as the lonely one that
      behaves differently here with #2.
      Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
      69be8f18
  21. 20 8月, 2005 1 次提交
    • A
      [SPARC]: Fix weak aliases · 83c4e437
      Al Viro 提交于
      sparc_ksyms.c used to declare weak alias to several gcc intrinsics.  It
      doesn't work with gcc4 anymore - it wants a declaration for the thing
      we are aliasing to and that's not going to happen for something like
      .mul, etc.  Replaced with direct injection of weak alias on the assembler
      level - .weak <alias> followed by <alias> = <aliased>; that works on all
      gcc versions.
      Signed-off-by: NAl Viro <viro@parcelfarce.linux.theplanet.co.uk>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      83c4e437
  22. 28 7月, 2005 1 次提交
  23. 27 7月, 2005 1 次提交
  24. 12 7月, 2005 1 次提交
    • S
      [NET]: add a top-level Networking menu to *config · d5950b43
      Sam Ravnborg 提交于
      Create a new top-level menu named "Networking" thus moving
      net related options and protocol selection way from the drivers
      menu and up on the top-level where they belong.
      
      To implement this all architectures has to source "net/Kconfig" before
      drivers/*/Kconfig in their Kconfig file. This change has been
      implemented for all architectures.
      
      Device drivers for ordinary NIC's are still to be found
      in the Device Drivers section, but Bluetooth, IrDA and ax25
      are located with their corresponding menu entries under the new
      networking menu item.
      Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      d5950b43
  25. 11 7月, 2005 1 次提交
  26. 29 6月, 2005 1 次提交
  27. 24 6月, 2005 2 次提交
  28. 22 6月, 2005 1 次提交
  29. 06 5月, 2005 1 次提交