- 08 4月, 2012 6 次提交
-
-
由 Scott Wood 提交于
Add processor support for e500mc, using hardware virtualization support (GS-mode). Current issues include: - No support for external proxy (coreint) interrupt mode in the guest. Includes work by Ashish Kalra <Ashish.Kalra@freescale.com>, Varun Sethi <Varun.Sethi@freescale.com>, and Liu Yu <yu.liu@freescale.com>. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
tlbilx is the new, preferred invalidation instruction. It is not found on e500 prior to e500mc, but there should be no harm in supporting it on all e500. Based on code from Ashish Kalra <Ashish.Kalra@freescale.com>. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
Rather than invalidate everything when a TLB1 entry needs to be taken down, keep track of which host TLB1 entries are used for a given guest TLB1 entry, and invalidate just those entries. Based on code from Ashish Kalra <Ashish.Kalra@freescale.com> and Liu Yu <yu.liu@freescale.com>. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
The PID handling is e500v1/v2-specific, and is moved to e500.c. The MMU sregs code and kvmppc_core_vcpu_translate will be shared with e500mc, and is moved from e500.c to e500_tlb.c. Partially based on patches from Liu Yu <yu.liu@freescale.com>. Signed-off-by: NScott Wood <scottwood@freescale.com> [agraf: fix bisectability] Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
Keeping two separate headers for e500-specific things was a pain, and wasn't even organized along any logical boundary. There was TLB stuff in <asm/kvm_e500.h> despite the existence of arch/powerpc/kvm/e500_tlb.h, and nothing in <asm/kvm_e500.h> needed to be referenced from outside arch/powerpc/kvm. Signed-off-by: NScott Wood <scottwood@freescale.com> [agraf: fix bisectability] Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
This is in preparation for merging in the contents of arch/powerpc/include/asm/kvm_e500.h. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 05 3月, 2012 10 次提交
-
-
由 Liu Yu 提交于
The existing kvm_stlb_write/kvm_gtlb_write were a poor match for the e500/book3e MMU -- mas1 was passed as "tid", mas2 was limited to "unsigned int" which will be a problem on 64-bit, mas3/7 got split up rather than treated as a single 64-bit word, etc. Signed-off-by: NLiu Yu <yu.liu@freescale.com> [scottwood@freescale.com: made mas2 64-bit, and added mas8 init] Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
The hardware maintains a per-set next victim hint. Using this reduces conflicts, especially on e500v2 where a single guest TLB entry is mapped to two shadow TLB entries (user and kernel). We want those two entries to go to different TLB ways. sesel is now only used for TLB1. Reported-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
The associativity, not just total size, can differ from the host hardware. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
This allows additional registers to be accessed by the guest in PR-mode KVM without trapping. SPRG4-7 are readable from userspace. On booke, KVM will sync these registers when it enters the guest, so that accesses from guest userspace will work. The guest kernel, OTOH, must consistently use either the real registers or the shared area between exits. This also applies to the already-paravirted SPRG3. On non-booke, it's not clear to what extent SPRG4-7 are supported (they're not architected for book3s, but exist on at least some classic chips). They are copied in the get/set regs ioctls, but I do not see any non-booke emulation. I also do not see any syncing with real registers (in PR-mode) including the user-readable SPRG3. This patch should not make that situation any worse. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Alexander Graf 提交于
With hugetlbfs support emerging on e500, we should also support KVM backing its guest memory by it. This patch adds support for hugetlbfs into the e500 shadow mmu code. Signed-off-by: NAlexander Graf <agraf@suse.de> Acked-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
It should contain the way, not the absolute TLB0 index. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
This implements a shared-memory API for giving host userspace access to the guest's TLB. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
Split out the portions of tlbe_priv that should be associated with host entries into tlbe_ref. Base victim selection on the number of hardware entries, not guest entries. For TLB1, where one guest entry can be mapped by multiple host entries, we use the host tlbe_ref for tracking page references. For the guest TLB0 entries, we still track it with gtlb_priv, to avoid having to retranslate if the entry is evicted from the host TLB but not the guest TLB. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
The only place it makes sense to call this function already needs to have preemption disabled. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Scott Wood 提交于
Delay allocation of the shadow pid until we're ready to disable preemption and write the entry. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 12 7月, 2011 8 次提交
-
-
由 Scott Wood 提交于
Only look in the 4 entries that could possibly contain the entry we're looking for. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Liu Yu 提交于
Dynamically assign host PIDs to guest PIDs, splitting each guest PID into multiple host (shadow) PIDs based on kernel/user and MSR[IS/DS]. Use both PID0 and PID1 so that the shadow PIDs for the right mode can be selected, that correspond both to guest TID = zero and guest TID = guest PID. This allows us to significantly reduce the frequency of needing to invalidate the entire TLB. When the guest mode or PID changes, we just update the host PID0/PID1. And since the allocation of shadow PIDs is global, multiple guests can share the TLB without conflict. Note that KVM does not yet support the guest setting PID1 or PID2 to a value other than zero. This will need to be fixed for nested KVM to work. Until then, we enforce the requirement for guest PID1/PID2 to stay zero by failing the emulation if the guest tries to set them to something else. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Liu Yu 提交于
Instead of a fully separate set of TLB entries, keep just the pfn and dirty status. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
This is a shared page used for paravirtualization. It is always present in the guest kernel's effective address space at the address indicated by the hypercall that enables it. The physical address specified by the hypercall is not used, as e500 does not have real mode. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
This allows large pages to be used on guest mappings backed by things like /dev/mem, resulting in a significant speedup when guest memory is mapped this way (it's useful for directly-assigned MMIO, too). This is not a substitute for hugetlbfs integration, but is useful for configurations where devices are directly assigned on chips without an IOMMU -- in these cases, we need guest physical and true physical to match, and be contiguous, so static reservation and mapping via /dev/mem is the most straightforward way to set things up. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
This is in line with what other architectures do, and will allow us to map things other than ordinary, unreserved kernel pages -- such as dedicated devices, or large contiguous reserved regions. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
This avoids races. It also means that we use the shadow TLB way, rather than the hardware hint -- if this is a problem, we could do a tlbsx before inserting a TLB0 entry. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
Since TLB1 loading doesn't check the shadow TLB before allocating another entry, you can get duplicates. Once shadow PIDs are enabled in a later patch, we won't need to invalidate the TLB on every switch, so this optimization won't be needed anyway. Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 22 5月, 2011 2 次提交
-
-
由 Scott Wood 提交于
Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Scott Wood 提交于
The exit type setting for mfspr/mtspr is moved from 44x to toplevel SPR emulation. This enables it on e500, and makes sure that all SPRs are covered. Exit accounting for tlbwe and tlbsx is added to e500. Signed-off-by: NStuart Yoder <stuart.yoder@freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
- 24 10月, 2010 3 次提交
-
-
由 Alexander Graf 提交于
The e500_tlb.c file didn't compile for me due to the following error: arch/powerpc/kvm/e500_tlb.c: In function ‘kvmppc_e500_shadow_map’: arch/powerpc/kvm/e500_tlb.c:300: error: format ‘%lx’ expects type ‘long unsigned int’, but argument 2 has type ‘gfn_t’ So let's explicitly cast the argument to make printk happy. Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Kyle Moffett 提交于
The kvmppc_e500_stlbe_invalidate() function was trying to pass too many parameters to trace_kvm_stlb_inval(). This appears to be a bad copy-paste from a call to trace_kvm_stlb_write(). Signed-off-by: NKyle Moffett <Kyle.D.Moffett@boeing.com> Signed-off-by: NAlexander Graf <agraf@suse.de>
-
由 Alexander Graf 提交于
One of the most obvious registers to share with the guest directly is the MSR. The MSR contains the "interrupts enabled" flag which the guest has to toggle in critical sections. So in order to bring the overhead of interrupt en- and disabling down, let's put msr into the shared page. Keep in mind that even though you can fully read its contents, writing to it doesn't always update all state. There are a few safe fields that don't require hypervisor interaction. See the documentation for a list of MSR bits that are safe to be set from inside the guest. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 01 3月, 2010 2 次提交
-
-
由 Liu Yu 提交于
commit 55fb1027c1cf9797dbdeab48180da530e81b1c39 doesn't update tlbcfg correctly. Fix it. And since guest OS likes 'fixed' hardware, initialize tlbcfg everytime when guest access is useless. So move this part to init code. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Acked-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Alexander Graf 提交于
All code in PPC KVM currently accesses gprs in the vcpu struct directly. While there's nothing wrong with that wrt the current way gprs are stored and loaded, it doesn't suffice for the PACA acceleration that will follow in this patchset. So let's just create little wrapper inline functions that we call whenever a GPR needs to be read from or written to. The compiled code shouldn't really change at all for now. Signed-off-by: NAlexander Graf <agraf@suse.de> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 10 9月, 2009 2 次提交
-
-
由 Marcelo Tosatti 提交于
[avi: make it build] [avi: fold trace-arch.h into trace.h] CC: Hollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Liu Yu 提交于
According to commit 70fe3af8. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 24 3月, 2009 6 次提交
-
-
由 Liu Yu 提交于
TLB entry should enable memory coherence in SMP. And like commit 631fba9dd3aca519355322cef035730609e91593, remove guard attribute to enable the prefetch of guest memory. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Liu Yu 提交于
Should clear and then update the next victim area here. Guest kernel only read TLB1 when startup kernel, this bug result in an extra 4K TLB1 mapping in guest from 0x0 to 0x0. As the problem has no impact to bootup a guest, we didn't notice it before. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Liu Yu 提交于
Latest kernel flushes TLB via mmucsr0. Signed-off-by: NLiu Yu <yu.liu@freescale.com> Acked-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Liu Yu 提交于
Commit 2a4aca11 removed old method _tlbia(). Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Liu Yu 提交于
Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Hollis Blanchard 提交于
Signed-off-by: NLiu Yu <yu.liu@freescale.com> Signed-off-by: NHollis Blanchard <hollisb@us.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-