[WHY]
DP 2.0 SCR specifies that TX devices must retry at least 7 times when
receiving an AUX DEFER reply from RX. In addition, the specification
states that the TX shall not retry indefinitely, and gives a suggestive
timeout interval of 50ms.

[HOW]
Keep retrying until both 7 or more retries have been made, and the 50ms
interval has passed.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
7 is the minimum number of retries TX must attempt on an AUX DEFER, not
the maximum.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Some DPCD addresses, notably LTTPR Capability registers, are expected to
be read all together in a single DPCD transaction. Rather than force callers to
read registers they don't need, we want to quietly extend the addresses
read, and only return back the values the caller asked for.
This does not affect DPCD writes.

[HOW]
Create an additional layer above AUX to perform 'checked' DPCD
transactions.
Iterate through an array of DPCD address ranges that are marked as being
contiguous. If a requested read falls within one of those ranges, extend
the read to include the entire range.
After DPCD has been queried, copy the requested bytes into the caller's
data buffer, and deallocate all resources used.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
DP specifies that an LTTPR device is only present if PHY_REPEATER_CNT is
0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.

All other values should be considered no LTTPRs present.

[HOW]
Function dp_convert_to_count already does this check. Use it to determine
if PHY_REPEATER_CNT is a valid LTTPR count.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
SCR for DP2.0 requires that LT be performed with PHY_REPEATER_MODE
programmed to 0x55 (Transparent) whenever PHY_REPEATER_CNT is any value
other than 0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, or 0x01.

[HOW]
Write Non-Transparent (0xAA) to PHY_REPEATER_MODE when LTTPRs detected and Non-Transparent is
requested.
Write Transparent in all other cases.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
SCR for DP 2.0 Spec states that a DPTX shall put LTTPRs into Transparent
mode after reading LTTPR Capability registers on HPD.

The wording of the SCR is somewhat ambiguous as to whether
Transparent mode must be set explicity, or is implicitly set on LTTPR
capability read. Explicitly setting Transparent mode after LTTPR
capability read should cover all
cases.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
SCR for DP 2.0 requires that LTTPR caps be read first on hotplug.
For the sake of consistency, this should also be the case on bootup.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
We want LTTPR capabilities to be readable from more places than just
retrieve_link_cap
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
A new SCR for the DP2.0 spec requires that LTTPR caps be the first thing
read from DPCD upon hotplug.
Signed-off-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Reviewed-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Improve the maintain/read abilities of dm code.

[How]
Create amdgpu_dm_psr.c/h files.
Move psr function from amdgpu_dm.c
Signed-off-by: NRoman Li <roman.li@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This version brings along following fixed:
   - LTTPR improvements
   - Backlight improvements
   - eDP hotplug detection
Signed-off-by: NAric Cyr <aric.cyr@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Fixed spelling error.

[How]
Changed "currnet_setting" to "current_setting".
Signed-off-by: NDavid Galiffi <David.Galiffi@amd.com>
Reviewed-by: NWesley Chalmers <Wesley.Chalmers@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
To change the swizzle visual confirm reference pipe from top pipe to
bottom pipe due to bottom pipe information would be more important
for multiple overlay case.
Signed-off-by: NPo-Ting Chen <robin.chen@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
Move mst start top mgr in dc_link_detect layer.
Remove unused same_dpcd variable.
Move PEAK_FACTOR_X1000 and LINK_TRAINING_MAX_VERIFY_RETRY
to the proper header for defining dc link internal constant.
Signed-off-by: NWenjing Liu <wenjing.liu@amd.com>
Reviewed-by: NGeorge Shen <George.Shen@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why & How]
Tune backlight ramping profiles for each Vari-Bright level to suit
customer preferences
Signed-off-by: NJosip Pavic <Josip.Pavic@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Some custom platforms use eDP hotplug events to notify panel
capability changes that should be reported

[How]
Add a DC config option that unblocks eDP hotplug events
Signed-off-by: NYi-Ling Chen <Yi-Ling.Chen2@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[WHY]
Ability to triage DMCUB is improved with availability of certain
dmub registers not currently captured in crash dump diagnostic data.

[HOW]
Add dmub registers to diagnostic data collection.

Thanks Nicholas Kazlauskas for awesome input on this!
Signed-off-by: NAshley Thomas <Ashley.Thomas2@amd.com>
Reviewed-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

cleanup
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NAnson Jacob <Anson.Jacob@amd.com>
Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

get_wave_state acquires the mmap_lock on copy_to_user but so do
mmu_notifiers.  mmu_notifiers allows dqm locking so do get_wave_state
outside the dqm_lock to prevent circular locking.

v2: squash in unused variable removal.
Signed-off-by: NJonathan Kim <jonathan.kim@amd.com>
Reviewed-by: NFelix Kuehling <felix.kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For each CRTC state, check the size of Gamma and Degamma LUTs  so
unexpected and larger sizes wouldn't slip through.

TEST: IGT:kms_color::pipe-invalid-gamma-lut-sizes

v2: fix assignments in if clauses, Mark's email.
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NMark Yacoub <markyacoub@chromium.org>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

GECC and G6 mem training are mutually exclusive
functionalities. VBIOS/PSP will set the flag
(BOOT_CFG_FEATURE_TWO_STAGE_DRAM_TRAINING) in
runtime database to indicate whether dram memory
training need to be disabled or not.

For Navi1x families, two stage mem training is always
enabled.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PSP runtime boot_cfg_bitmask carries various psp bl
feature bit mask that can be used by driver. Cache
it in sw_init for further usage.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PSP will dump various boot up information into a
portion of local frame buffer, called runtime database.
The helper function is used for driver to query those
shared information.

v2: init ret and check !ret to exit loop as soon as
found the entry
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

PSP runtime database is used to share various
boot up information with driver.
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Dynamic GECC allows user to specify GECC enablement
status, which will take effect in next boot cycle.

v2: initialize boot_cfg to 0xFF
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Query GECC enablement status in boot config
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

More boot configs need to be supported via
BOOTCFG_CMD_SET
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

psp_gfx_uresp_bootcfg is used to inform driver
bootcfg settings maintained by tOS
Signed-off-by: NHawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: NJohn Clements <john.clements@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CoherentHostAccess flag support has moved from HSA_MEMORYPROPERTY
to HSA_CAPABILITY struct. Proper changes have made also at the thunk
to support this change.

CoherentHostAccess: whether or not device memory can be coherently
accessed by the host CPU.
Signed-off-by: NAlex Sierra <alex.sierra@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why&How]
PG registers are absent in beige goby, so programming these registers
generate call trace. Fix this by adding a dummy function in dcn303
initialization function which prevents writing to non existant registers.

Fixes: cd6d421e ("drm/amd/display: Initial DC support for Beige Goby")
Signed-off-by: NAurabindo Pillai <aurabindo.pillai@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add support to read smart shift apu and dgpu power share
on yellow_carp
Signed-off-by: NSathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add support to read smart shift apu and dgpu power share
on renoir.
Signed-off-by: NSathishkumar S <sathishkumar.sundararaju@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is to fix a failure for SDMA updating PTEs.
Signed-off-by: NEric Huang <jinhuieric.huang@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use adev_to_drm() to get to the drm_device pointer.
Signed-off-by: NGuchun Chen <guchun.chen@amd.com>
Reviewed-by: NLuben Tuikov <luben.tuikov@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
psp ring wptr is not initialized properly in ring_create,
which would lead to psp failure after several gpu reset.

[How]
Set ring_wptr to zero in psp_ring_create.
Signed-off-by: NYuBiao Wang <YuBiao.Wang@amd.com>
Reviewed-by: NHorace Chen <horace.chen@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

On aldebaran, only primary die fetches valid power data. Show
power/energy values as 0 on secondary die. Also, power limit should not
be set through secondary die.
Signed-off-by: NLijo Lazar <lijo.lazar@amd.com>
Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

As OOB(out-of-band) interface may be used to update the power limits.
Thus to make sure the power limits reporting of our driver always
reflects the correct values, the internal cache must be aligned
carefully.

V2: add support for out-of-band of other ASICs
    align cached current power limit with OOB imposed
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-By: NHarish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The original code returns IP version of instantce_0 for every IP. This implementation may be correct for most of IPs.

However, for certain IP block (VCN for example), it may have 2 instances and
both of them have the same hw_id, BUT they have different revision number (0 and 1).

In this case, the original amdgpu_discovery_get_ip_version cannot correct reflects
the result and returns false information
Signed-off-by: NBokun Zhang <Bokun.Zhang@amd.com>
Signed-off-by: NPeng Ju Zhou <PengJu.Zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For BACO scenario, PMFW will handle the dpm features disablement
and interaction with RLC properly. Driver involvement is unnecessary
and error prone.
Signed-off-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NLijo Lazar <lijo.lazar@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>