Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 07 8月, 2019 1 次提交
  3. 27 7月, 2019 1 次提交
  5. 12 7月, 2019 5 次提交
  7. 11 7月, 2019 2 次提交
  9. 05 7月, 2019 1 次提交
    • V
      drm/i915/ehl: Add support for DPLL4 (v10) · eef037ea
      由 Vivek Kasireddy 提交于 
      This patch adds support for DPLL4 on EHL that include the
following restrictions:

- DPLL4 cannot be used with DDIA (combo port A internal eDP usage).
  DPLL4 can be used with other DDIs, including DDID
  (combo port A external usage).

- DPLL4 cannot be enabled when DC5 or DC6 are enabled.

- The DPLL4 enable, lock, power enabled, and power state are connected
  to the MGPLL1_ENABLE register.

v2: (suggestions from Bob Paauwe)
- Rework ehl_get_dpll() function to call intel_find_shared_dpll() and
  iterate twice: once for Combo plls and once for MG plls.

- Use MG pll funcs for DPLL4 instead of creating new ones and modify
  mg_pll_enable to include the restrictions for EHL.

v3: Fix compilation error

v4: (suggestions from Lucas and Ville)
- Treat DPLL4 as a combo phy PLL and not as MG PLL
- Disable DC states when this DPLL is being enabled
- Reuse icl_get_dpll instead of creating a separate one for EHL

v5: (suggestion from Ville)
- Refcount the DC OFF power domains during the enabling and disabling
  of this DPLL.

v6: rebase

v7: (suggestion from Imre)
- Add a new power domain instead of iterating over the domains
  assoicated with DC OFF power well.

v8: (Ville and Imre)
- Rename POWER_DOMAIN_DPLL4 TO POWER_DOMAIN_DPLL_DC_OFF
- Grab a reference in intel_modeset_setup_hw_state() if this
  DPLL was already enabled perhaps by BIOS.
- Check for the port type instead of the encoder

v9: (Ville)
- Move the block of code that grabs a reference to the power domain
  POWER_DOMAIN_DPLL_DC_OFF to intel_modeset_readout_hw_state() to ensure
  that there is a reference present before this DPLL might get disabled.

v10: rebase

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Signed-off-by: NVivek Kasireddy <vivek.kasireddy@intel.com>
Reviewed-by: NJosé Roberto de Souza <jose.souza@intel.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190703230353.24059-1-vivek.kasireddy@intel.com
      eef037ea
  11. 03 7月, 2019 1 次提交
  13. 01 7月, 2019 3 次提交
  15. 17 6月, 2019 2 次提交
  17. 14 6月, 2019 2 次提交
  19. 12 6月, 2019 1 次提交
  21. 04 6月, 2019 1 次提交
  23. 14 5月, 2019 6 次提交
    • I
      drm/i915: Replace use of PLLS power domain with DISPLAY_CORE domain · 08d8e170
      由 Imre Deak 提交于 
      There isn't a separate power domain specific to PLLs. When programming
them we require the same power domain to be enabled which is needed when
accessing other display core parts (not specific to any
pipe/port/transcoder). This corresponds to the DISPLAY_CORE domain added
previously in this patchset, so use that instead to save bits in the
power domain mask.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-10-imre.deak@intel.com
      08d8e170
    • I
      drm/i915: Remove the unneeded AUX power ref from intel_dp_detect() · 6cfe7ec0
      由 Imre Deak 提交于 
      We don't need the AUX power for the whole duration of the detect, only
when we're doing AUX transfers. The AUX transfer function takes its own
reference on the AUX power domain already. The two places during detect
which access display core registers (not specific to a
pipe/port/transcoder) only need the power domain that is required for
that access. That power domain is equivalent to the device global power
domain on most platforms (enabled whenever we hold a runtime PM
reference) except on CHV/VLV where it's equivalent to the display power
well.

Add a new power domain that reflects the above, and use this at the two
spots accessing registers. With that we can avoid taking the AUX
reference for the whole duration of the detect function.

Put the domains asynchronously to avoid the unneeded on-off-on toggling.

Also adapt the idea from with_intel_runtime_pm et al. for making it easy
to write short sequences where a display power ref is needed.

v2: (Ville)
- Add with_intel_display_power() helper to simplify things.
- s/bool res/bool is_connected/

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-8-imre.deak@intel.com
      6cfe7ec0
    • I
      drm/i915: Add support for asynchronous display power disabling · e0da2d63
      由 Imre Deak 提交于 
      By disabling a power domain asynchronously we can restrict holding a
reference on that power domain to the actual code sequence that
requires the power to be on for the HW access it's doing, by also
avoiding unneeded on-off-on togglings of the power domain (since the
disabling happens with a delay).

One benefit is potential power saving due to the following two reasons:
1. The fact that we will now be holding the reference only for the
   necessary duration by the end of the patchset. While simply not
   delaying the disabling has the same benefit, it has the problem that
   frequent on-off-on power switching has its own power cost (see the 2.
   point below) and the debug trace for power well on/off events will
   cause a lot of dmesg spam (see details about this further below).
2. Avoiding the power cost of freuqent on-off-on power switching. This
   requires us to find the optimal disabling delay based on the measured
   power cost of on->off and off->on switching of each power well vs.
   the power of keeping the given power well on.

   In this patchset I'm not providing this optimal delay for two
   reasons:
   a) I don't have the means yet to perform the measurement (with high
      enough signal-to-noise ratio, or with the help of an energy
      counter that takes switching into account). I'm currently looking
      for a way to measure this.

   b) Before reducing the disabling delay we need an alternative way for
      debug tracing powerwell on/off events. Simply avoiding/throttling
      the debug messages is not a solution, see further below.

   Note that even in the case where we can't measure any considerable
   power cost of frequent on-off switching of powerwells, it still would
   make sense to do the disabling asynchronously (with 0 delay) to avoid
   blocking on the disabling. On VLV I measured this disabling time
   overhead to be 1ms on average with a worst case of 4ms.

In the case of the AUX power domains on ICL we would also need to keep
the sequence where we hold the power reference short, the way it would
be by the end of this patchset where we hold it only for the actual AUX
transfer. Anything else would make the locking we need for ICL TypeC
ports (whenever we hold a reference on any AUX power domain) rather
problematic, adding for instance unnecessary lockdep dependencies to
the required TypeC port lock.

I chose the disabling delay to be 100msec for now to avoid the unneeded
toggling (and so not to introduce dmesg spamming) in the DP MST sideband
signaling code. We could optimize this delay later, once we have the
means to measure the switching power cost (see above).

Note that simply removing/throttling the debug tracing for power well
on/off events is not a solution. We need to know the exact spots of
these events and cannot rely only on incorrect register accesses caught
(due to not holding a wakeref at the time of access). Incorrect
powerwell enabling/disabling could lead to other problems, for instance
we need to keep certain powerwells enabled for the duration of modesets
and AUX transfers.

v2:
- Clarify the commit log parts about power cost measurement and the
  problem of simply removing/throttling debug tracing. (Chris)
- Optimize out local wakeref vars at intel_runtime_pm_put_raw() and
  intel_display_power_put_async() call sites if
  CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n. (Chris)
- Rebased on v2 of the wakeref w/o power-on guarantee patch.
- Add missing docbook headers.
v3:
- Checkpatch spelling/missing-empty-line fix.
v4:
- Fix unintended local wakeref var optimization when using
  call-arguments with side-effects, by using inline funcs instead of
  macros. In this patch in particular this will fix the
  intel_display_power_grab_async_put_ref()->intel_runtime_pm_put_raw()
  call).

  No size change in practice (would be the same disregarding the
  corresponding change in intel_display_power_grab_async_put_ref()):
  $ size i915-macro.ko
     text	   data	    bss	    dec	    hex	filename
  2455190	 105890	  10272	2571352	 273c58	i915-macro.ko
  $ size i915-inline.ko
     text	   data	    bss	    dec	    hex	filename
  2455195	 105890	  10272	2571357	 273c5d	i915-inline.ko

  Kudos to Stan for reporting the raw-wakeref WARNs this issue caused. His
  config has CONFIG_DRM_I915_DEBUG_RUNTIME_PM=n, which I didn't retest
  after v1, and we are also not testing this config in CI.

  Now tested both with CONFIG_DRM_I915_DEBUG_RUNTIME_PM=y/n on ICL,
  connecting both Chamelium and regular DP, HDMI sinks.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190513192533.12586-1-imre.deak@intel.com
      e0da2d63
    • I
      drm/i915: Verify power domains state during suspend in all cases · ee70080a
      由 Imre Deak 提交于 
      There is no reason why we couldn't verify the power domains state during
suspend in all cases, so do that. I overlooked this when originally
adding the check.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-4-imre.deak@intel.com
      ee70080a
    • I
      drm/i915: Force printing wakeref tacking during pm_cleanup · dbf99c1f
      由 Imre Deak 提交于 
      Make sure we print and drop the wakeref tracking info during pm_cleanup
even if there are wakeref holders (either raw-wakeref or wakelock
holders). Dropping the wakeref tracking means that a late put on the ref
will WARN since the wakeref will be unknown, but that is rightly so,
since the put is late and we want to catch that case.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-3-imre.deak@intel.com
      dbf99c1f
    • I
      drm/i915: Add support for tracking wakerefs w/o power-on guarantee · 4547c255
      由 Imre Deak 提交于 
      It's useful to track runtime PM refs that don't guarantee a device
power-on state to the rest of the driver. One such case is holding a
reference that will be put asynchronously, during which normal users
without their own reference shouldn't access the HW. A follow-up patch
will add support for disabling display power domains asynchronously
which needs this.

For this we can split wakeref_count into a low half-word tracking
all references (raw-wakerefs) and a high half-word tracking
references guaranteeing a power-on state (wakelocks).

Follow-up patches will make use of the API added here.

While at it add the missing docbook header for the unchecked
display-power and runtime_pm put functions.

No functional changes, except for printing leaked raw-wakerefs
and wakelocks separately in intel_runtime_pm_cleanup().

v2:
- Track raw wakerefs/wakelocks in the low/high half-word of
  wakeref_count, instead of adding a new counter. (Chris)
v3:
- Add a struct_member(T, m) helper instead of open-coding it. (Chris)
- Checkpatch indentation formatting fix.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: NImre Deak <imre.deak@intel.com>
Reviewed-by: NChris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190509173446.31095-2-imre.deak@intel.com
      4547c255
  25. 06 5月, 2019 2 次提交
  27. 03 5月, 2019 2 次提交
  29. 30 4月, 2019 4 次提交
  31. 29 4月, 2019 1 次提交
    • T
      drm: Simplify stacktrace handling · 487f3c7f
      由 Thomas Gleixner 提交于 
      Replace the indirection through struct stack_trace by using the storage
array based interfaces.

The original code in all printing functions is really wrong. It allocates a
storage array on stack which is unused because depot_fetch_stack() does not
store anything in it. It overwrites the entries pointer in the stack_trace
struct so it points to the depot storage.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NJosh Poimboeuf <jpoimboe@redhat.com>
Acked-by: NDaniel Vetter <daniel@ffwll.ch>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: intel-gfx@lists.freedesktop.org
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: linux-mm@kvack.org
Cc: David Rientjes <rientjes@google.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: kasan-dev@googlegroups.com
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: iommu@lists.linux-foundation.org
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Johannes Thumshirn <jthumshirn@suse.de>
Cc: David Sterba <dsterba@suse.com>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: linux-btrfs@vger.kernel.org
Cc: dm-devel@redhat.com
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Cc: Miroslav Benes <mbenes@suse.cz>
Cc: linux-arch@vger.kernel.org
Link: https://lkml.kernel.org/r/20190425094802.622094226@linutronix.de
      487f3c7f
  33. 26 4月, 2019 4 次提交
  35. 15 4月, 2019 1 次提交