The commit 17e8351a consistently use int for temperature,
however it missed a few in trip temperature and thermal_core.

In current codes, the trip->temperature used "unsigned long"
and zone->temperature used"int", if the temperature is negative
value, it will get wrong result when compare temperature with
trip temperature.

This patch can fix it.
Signed-off-by: NWei Ni <wni@nvidia.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Fix build errors when MTK_THERMAL=y and NVMEM=m by preventing that
Kconfig combination.

drivers/built-in.o: In function `mtk_thermal_probe':
mtk_thermal.c:(.text+0xffa8f): undefined reference to `nvmem_cell_get'
mtk_thermal.c:(.text+0xffabe): undefined reference to `nvmem_cell_read'
mtk_thermal.c:(.text+0xffac9): undefined reference to `nvmem_cell_put'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: <linux-pm@vger.kernel.org>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Hanyi Wu <hanyi.wu@mediatek.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Trivial cleanups:
- delete one duplicate #include
- end email address with closing '>'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Hanyi Wu <hanyi.wu@mediatek.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

req_range is declared as a u64 to cope with overflows in the
multiplication of two u32.  As both req_power and power_range are u32,
we need to make sure the multiplication is done with u64 types.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Signed-off-by: NJavi Merino <javi.merino@arm.com>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Add __init attribute on a function that is only called from other __init
functions and that is not inlined, at least with gcc version 4.8.4 on an
x86 machine with allyesconfig.  Currently, the function is put in the
.text.unlikely segment.  Declaring it as __init will cause it to be put in
the .init.text and to disappear after initialization.

The result of objdump -x on the function before the change is as follows:

0000000000000086 l     F .text.unlikely 0000000000000739 thermal_of_build_thermal_zone

And after the change it is as follows:

0000000000000000 l     F .init.text	0000000000000734 thermal_of_build_thermal_zone

Done with the help of Coccinelle.  The semantic patch checks for local
static non-init functions that are called from an __init function and are
not called from any other function.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NEduardo Valentin <edubezval@gmail.com>

Pull crypto fixes from Herbert Xu:
 "This fixes the following issues:

   - Incorrect output buffer size calculation in rsa-pkcs1pad

   - Uninitialised padding bytes on exported state in ccp driver

   - Potentially freed pointer used on completion callback in sha1-mb"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ccp - Prevent information leakage on export
  crypto: sha1-mb - use corrcet pointer while completing jobs
  crypto: rsa-pkcs1pad - fix dst len

Merge the ptmx internal interface cleanup branch.

This doesn't change semantics, but it should be a sane basis for
eventually getting the multi-instance devpts code into some sane shape
where we can get rid of the kernel config option.  Which we can
hopefully get done next merge window..

* ptmx-cleanup:
  devpts: clean up interface to pty drivers

Pull PCI fixes from Bjorn Helgaas:
 "These are fixes for two issues:

   - The VPD parsing code we added for v4.6 keeps some devices from
     crashing, but also keeps cxgb4 from reading non-standard extra VPD
     data that is relies on.  Hariprasad added a way for the driver to
     specify how much VPD is valid.

   - The i.MX6 active-low reset GPIO support we added in v4.5 caused
     regressions on some boards, so we're reverting that.

  VPD:
    Add pci_set_vpd_size() (Hariprasad Shenai)
    cxgb4: Set VPD size so we can read both VPD structures (Hariprasad Shenai)

  Freescale i.MX6 host bridge driver:
    Revert "PCI: imx6: Add support for active-low reset GPIO" (Fabio Estevam)"

* tag 'pci-v4.6-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
  cxgb4: Set VPD size so we can read both VPD structures
  PCI: Add pci_set_vpd_size() to set VPD size
  Revert "PCI: imx6: Add support for active-low reset GPIO"

This gets rid of the horrible notion of having that

    struct inode *ptmx_inode

be the linchpin of the interface between the pty code and devpts.

By de-emphasizing the ptmx inode, a lot of things actually get cleaner,
and we will have a much saner way forward.  In particular, this will
allow us to associate with any particular devpts instance at open-time,
and not be artificially tied to one particular ptmx inode.

The patch itself is actually fairly straightforward, and apart from some
locking and return path cleanups it's pretty mechanical:

 - the interfaces that devpts exposes all take "struct pts_fs_info *"
   instead of "struct inode *ptmx_inode" now.

   NOTE! The "struct pts_fs_info" thing is a completely opaque structure
   as far as the pty driver is concerned: it's still declared entirely
   internally to devpts. So the pty code can't actually access it in any
   way, just pass it as a "cookie" to the devpts code.

 - the "look up the pts fs info" is now a single clear operation, that
   also does the reference count increment on the pts superblock.

   So "devpts_add/del_ref()" is gone, and replaced by a "lookup and get
   ref" operation (devpts_get_ref(inode)), along with a "put ref" op
   (devpts_put_ref()).

 - the pty master "tty->driver_data" field now contains the pts_fs_info,
   not the ptmx inode.

 - because we don't care about the ptmx inode any more as some kind of
   base index, the ref counting can now drop the inode games - it just
   gets the ref on the superblock.

 - the pts_fs_info now has a back-pointer to the super_block. That's so
   that we can easily look up the information we actually need. Although
   quite often, the pts fs info was actually all we wanted, and not having
   to look it up based on some magical inode makes things more
   straightforward.

In particular, now that "devpts_get_ref(inode)" operation should really
be the *only* place we need to look up what devpts instance we're
associated with, and we do it exactly once, at ptmx_open() time.

The other side of this is that one ptmx node could now be associated
with multiple different devpts instances - you could have a single
/dev/ptmx node, and then have multiple mount namespaces with their own
instances of devpts mounted on /dev/pts/.  And that's all perfectly sane
in a model where we just look up the pts instance at open time.

This will eventually allow us to get rid of our odd single-vs-multiple
pts instance model, but this patch in itself changes no semantics, only
an internal binding model.

Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Anvin <hpa@zytor.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Peter Hurley <peter@hurleysoftware.com>
Cc: Serge Hallyn <serge.hallyn@ubuntu.com>
Cc: Willy Tarreau <w@1wt.eu>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Cc: Jann Horn <jann@thejh.net>
Cc: Greg KH <greg@kroah.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Florian Weimer <fw@deneb.enyo.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull s390 fixes from Martin Schwidefsky:
 "A couple of bug fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390: add CPU_BIG_ENDIAN config option
  s390/spinlock: avoid yield to non existent cpu
  s390/dcssblk: fix possible deadlock in remove vs. per-device attributes
  s390/seccomp: include generic seccomp header file
  s390/pci: add extra padding to function measurement block
  s390/scm_blk: fix deadlock for requests != REQ_TYPE_FS

Pull device mapper fix from Mike Snitzer:
 "Fix for earlier 4.6-rc4 stable@ commit that introduced improper use of
  write lock in cmd_read_lock() -- due to cut-n-paste gone awry (and
  sparse didn't catch it)"

* tag 'dm-4.6-fix-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
  dm cache metadata: fix cmd_read_lock() acquiring write lock

Commit 9567366f ("dm cache metadata: fix READ_LOCK macros and
cleanup WRITE_LOCK macros") uses down_write() instead of down_read() in
cmd_read_lock(), yet up_read() is used to release the lock in
READ_UNLOCK().  Fix it.

Fixes: 9567366f ("dm cache metadata: fix READ_LOCK macros and cleanup WRITE_LOCK macros")
Cc: stable@vger.kernel.org
Signed-off-by: NAhmed Samy <f.fallen45@gmail.com>
Signed-off-by: NMike Snitzer <snitzer@redhat.com>

Pull char/misc fixes from Greg KH:
 "Here are some small char/misc driver fixes for 4.6-rc4.  Full details
  are in the shortlog, nothing major here.

  These have all been in linux-next for a while with no reported issues"

* tag 'char-misc-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  lkdtm: do not leak free page on kmalloc failure
  lkdtm: fix memory leak of base
  lkdtm: fix memory leak of val
  extcon: palmas: Drop stray IRQF_EARLY_RESUME flag

Pull misc fixes from Greg KH:
 "Here are three small fixes for 4.6-rc4.

  Two fix up some lz4 issues with big endian systems, and the remaining
  one resolves a minor debugfs issue that was reported.

  All have been in linux-next with no reported issues"

* tag 'driver-core-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  lib: lz4: cleanup unaligned access efficiency detection
  lib: lz4: fixed zram with lz4 on big endian machines
  debugfs: Make automount point inodes permanently empty

Pull USB driver fixes from Greg KH:
 "Here are some small USB fixes for 4.6-rc4.

  Mostly xhci fixes for reported issues, a UAS bug that has hit a number
  of people, including stable tree users, and a few other minor things.

  All have been in linux-next for a while with no reported issues"

* tag 'usb-4.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: hcd: out of bounds access in for_each_companion
  USB: uas: Add a new NO_REPORT_LUNS quirk
  USB: uas: Limit qdepth at the scsi-host level
  doc: usb: Fix typo in gadget_multi documentation
  usb: host: xhci-plat: Make enum xhci_plat_type start at a non zero value
  xhci: fix 10 second timeout on removal of PCI hotpluggable xhci controllers
  usb: xhci: fix wild pointers in xhci_mem_cleanup
  usb: host: xhci-plat: fix cannot work if R-Car Gen2/3 run on above 4GB phys
  usb: host: xhci: add a new quirk XHCI_NO_64BIT_SUPPORT
  xhci: resume USB 3 roothub first
  usb: xhci: applying XHCI_PME_STUCK_QUIRK to Intel BXT B0 host
  cdc-acm: fix crash if flushed with nothing buffered

Pull dmaengine fixes from Vinod Koul:
 "This time we have some odd fixes in hsu, edma, omap and xilinx.

  Usual fixes and nothing special"

* tag 'dmaengine-fix-4.6-rc4' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: dw: fix master selection
  dmaengine: edma: special case slot limit workaround
  dmaengine: edma: Remove dynamic TPTC power management feature
  dmaengine: vdma: don't crash when bad channel is requested
  dmaengine: omap-dma: Do not suppress interrupts for memcpy
  dmaengine: omap-dma: Fix polled channel completion detection and handling
  dmaengine: hsu: correct use of channel status register
  dmaengine: hsu: correct residue calculation of active descriptor
  dmaengine: hsu: set HSU_CH_MTSR to memory width

Pull locking fixlet from Ingo Molnar:
 "Fixes a build warning on certain Kconfig combinations"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/lockdep: Fix print_collision() unused warning

Pull EFI fix from Ingo Molnar:
 "An arm64 boot crash fix"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  efi/arm64: Don't apply MEMBLOCK_NOMAP to UEFI memory map mapping

Pull block fixes from Jens Axboe:
 "A few fixes for the current series. This contains:

   - Two fixes for NVMe:

     One fixes a reset race that can be triggered by repeated
     insert/removal of the module.

     The other fixes an issue on some platforms, where we get probe
     timeouts since legacy interrupts isn't working.  This used not to
     be a problem since we had the worker thread poll for completions,
     but since that was killed off, it means those poor souls can't
     successfully probe their NVMe device.  Use a proper IRQ check and
     probe (msi-x -> msi ->legacy), like most other drivers to work
     around this.  Both from Keith.

   - A loop corruption issue with offset in iters, from Ming Lei.

   - A fix for not having the partition stat per cpu ref count
     initialized before sending out the KOBJ_ADD, which could cause user
     space to access the counter prior to initialization.  Also from
     Ming Lei.

   - A fix for using the wrong congestion state, from Kaixu Xia"

* 'for-linus' of git://git.kernel.dk/linux-block:
  block: loop: fix filesystem corruption in case of aio/dio
  NVMe: Always use MSI/MSI-x interrupts
  NVMe: Fix reset/remove race
  writeback: fix the wrong congested state variable definition
  block: partition: initialize percpuref before sending out KOBJ_ADD

Pull libnvdimm fixes from Ross Zwisler:
 "Two fixes:

   - Fix memcpy_from_pmem() to fallback to memcpy() for architectures
     where CONFIG_ARCH_HAS_PMEM_API=n.

   - Add a comment explaining why we write data twice when clearing
     poison in pmem_do_bvec().

  This has passed a boot test on an X86_32 config, which was the
  architecture where issue #1 above was first noticed"

Dan Williams adds:
 "We're giving this multi-maintainer setup a shot, so expect libnvdimm
  pull requests from either Ross or I going forward"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  libnvdimm, pmem: clarify the write+clear_poison+write flow
  pmem: fix BUG() error in pmem.h:48 on X86_32

Pull MTD fix from Brian Norris:
 "One MTD fix for v4.6-rc4:

  In the v4.4 cycle, we relaxed the requirement for assigning
  mtd->owner, but we didn't remove this error case.  It's hit only
  by drivers that are both:

   (a) using nand_scan() directly
  and
   (b) built as modules

  We haven't seen explicit complaints about this (most use cases don't
  fit one or both of the above), but we should definitely not be
  BUG()'ing here"

* tag 'for-linus-20160415' of git://git.infradead.org/linux-mtd:
  mtd: nand: Drop mtd.owner requirement in nand_scan

Pull MMC fixes from Ulf Hansson:
 "Here are a couple of mmc fixes intended for v4.6 rc4.

  Regarding the fix for the regression about mmcblk device indexes.  The
  approach taken to solve the problem seems to be good enough.  There
  were some discussions around the solution, but it seems like people
  were happy about it in the end.

  MMC core:
   - Restore similar old behaviour when assigning mmcblk device indexes

  MMC host:
   - tegra: Disable UHS-I modes for Tegra124 to fix regression"

* tag 'mmc-v4.6-rc3' of git://git.linaro.org/people/ulf.hansson/mmc:
  mmc: tegra: Disable UHS-I modes for Tegra124
  mmc: block: Use the mmc host device index as the mmcblk device index

Pull drm fixes from Dave Airlie:
 "This contains fixes for exynos, amdgpu, radeon, i915 and qxl.

  It also contains some fixes to the core drm edid parser.

  qxl:
   - fix for a cursor hotspot issue

  radeon:
   - some MST fixes that I've been running locally and make my monitor a
     bit happier

  exynos:
   - fix some regressions and build fixes

  amdgpu:
   - a couple of small fixes

  i915:
   - two DP MST fixes and a couple of other regression fixes

  Nothing too out of the ordinary or surprising at this point"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  drm/exynos: Use VIDEO_SAMSUNG_S5P_G2D=n as G2D Kconfig dependency
  drm/exynos: fix a warning message
  drm/exynos: mic: fix an error code
  drm/exynos: fimd: fix broken dp_clock control
  drm/exynos: build fbdev code conditionally
  drm/exynos: fix adjusted_mode pointer in exynos_plane_mode_set
  drm/exynos: fix error handling in exynos_drm_subdrv_open
  drm/amd/amdgpu: fix irq domain remove for tonga ih
  drm/i915: fix deadlock on lid open
  drm/radeon: use helper for mst connector dpms.
  drm/radeon/mst: port some MST setup code from DAL.
  drm/amdgpu: add invisible pin size statistic
  drm/edid: Fix DMT 1024x768@43Hz (interlaced) timings
  drm/i915: Exit cherryview_irq_handler() after one pass
  drm/i915: Call intel_dp_mst_resume() before resuming displays
  drm/i915: Fix race condition in intel_dp_destroy_mst_connector()
  drm/edid: Fix parsing of EDID 1.4 Established Timings III descriptor
  drm/edid: Fix EDID Established Timings I and II
  drm/qxl: fix cursor position with non-zero hotspot

Pull parisc ftrace fixes from Helge Deller:
 "This is (most likely) the last pull request for v4.6 for the parisc
  architecture.

  It fixes the FTRACE feature for parisc, which is horribly broken since
   quite some time and doesn't even compile.  This patch just fixes the
  bare minimum (it actually removes more lines than it adds), so that
  the function tracer works again on 32- and 64bit kernels.

  I've queued up additional patches on top of this patch which e.g. add
  the syscall tracer, but those have to wait for the merge window for
  v4.7."

* 'parisc-4.6-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix ftrace function tracer

The ACPI specification does not specify the state of data after a clear
poison operation.  Potential future libnvdimm bus implementations for
other architectures also might not specify or disagree on the state of
data after clear poison.  Clarify why we write twice.
Reported-by: NJeff Moyer <jmoyer@redhat.com>
Reported-by: NVishal Verma <vishal.l.verma@intel.com>
Signed-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NJeff Moyer <jmoyer@redhat.com>
Reviewed-by: NVishal Verma <vishal.l.verma@intel.com>

Chelsio adapters have two VPD structures stored in the VPD:

  - offset 0x000: an abbreviated VPD, and
  - offset 0x400: the complete VPD.

After 104daa71 ("PCI: Determine actual VPD size on first access"), the
PCI core computes the valid VPD size by parsing the VPD starting at offset
0x0.  That size only includes the abbreviated VPD structure, so reads of
the complete VPD at 0x400 fail.

Explicitly set the VPD size with pci_set_vpd_size() so the driver can read
both VPD structures.

[bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and
return int (not ssize_t)]
Fixes: 104daa71 ("PCI: Determine actual VPD size on first access")
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

After 104daa71 ("PCI: Determine actual VPD size on first access"), the
PCI core computes the valid VPD size by parsing the VPD starting at offset
0x0.  We don't attempt to read past that valid size because that causes
some devices to crash.

However, some devices do have data past that valid size.  For example,
Chelsio adapters contain two VPD structures, and the driver needs both of
them.

Add pci_set_vpd_size().  If a driver knows it is safe to read past the end
of the VPD data structure at offset 0, it can use pci_set_vpd_size() to
allow access to as much data as it needs.

[bhelgaas: changelog, split patches, rename to pci_set_vpd_size() and
return int (not ssize_t)]
Fixes: 104daa71 ("PCI: Determine actual VPD size on first access")
Tested-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NHariprasad Shenai <hariprasad@chelsio.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Make sure that s390 appears to be a big endian machine by defining
this config option.

Without this s390 appears to be little endian as seen by e.g. the
recordmount script: "perl ./scripts/recordmcount.pl "s390" "little"
"64""
This has no practical impact within the script since the endian
variable is only evaluated for mips. However there are already a
couple of common code places which evaluate this config option. None
of them is relevant for s390 currently though.

To avoid any issues in the future (and fix the recordmcount oddity)
add the new config option.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

arch_spin_lock_wait_flags() checks if a spinlock is not held before
trying a compare and swap instruction. If the lock is unlocked it
tries the compare and swap instruction, however if a different cpu
grabbed the lock in the meantime the instruction will fail as
expected.

Subsequently the arch_spin_lock_wait_flags() incorrectly tries to
figure out if the cpu that holds the lock is running. However it is
using the wrong cpu number for this (-1) and then will also yield the
current cpu to the wrong cpu.

Fix this by adding a missing continue statement.

Fixes: 470ada6b ("s390/spinlock: refactor arch_spin_lock_wait[_flags]")
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

dcssblk_remove_store() holds the dcssblk_devices_sem semaphore while
calling device_unregister(), which in turn tries to acquire the kernfs
kn->dev_map rwsem for the device sysfs subtree. The same rwsem is also
acquired when using the per-device sysfs attributes in the device sub-tree,
and the attribute handlers then also acquire the dcssblk_devices_sem.

This can lead to a deadlock when removing a DCSS while concurrently
reading from / writing to one of its sysfs attributes. The following
lockdep warning hinted towards the issue (CPU0 = dcssblk_remove_store,
CPU1 = dcssblk_shared_store):

[   76.496047]  Possible unsafe locking scenario:

[   76.496054]        CPU0                    CPU1
[   76.496059]        ----                    ----
[   76.496087]   lock(&dcssblk_devices_sem);
[   76.496090]                                lock(s_active#175);
[   76.496106]                                lock(&dcssblk_devices_sem);
[   76.496110]   lock(s_active#175);
[   76.496115]
 *** DEADLOCK ***

Fix this by releasing the dcssblk_devices_sem semaphore, which only
protects internal DCSS data, before calling device_unregister().
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Starting from commit e36f6204(block: split bios to max possible length),
block core starts to split bio in the middle of bvec.

Unfortunately loop dio/aio doesn't consider this situation, and
always treat 'iter.iov_offset' as zero. Then filesystem corruption
is observed.

This patch figures out the offset of the base bvevc via
'bio->bi_iter.bi_bvec_done' and fixes the issue by passing the offset
to iov iterator.

Fixes: e36f6204 (block: split bios to max possible length)
Cc: Keith Busch <keith.busch@intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@vger.kernel.org (4.5)
Signed-off-by: NMing Lei <ming.lei@canonical.com>
Signed-off-by: NJens Axboe <axboe@fb.com>

Prevent information from leaking to userspace by doing a memset to 0 of
the export state structure before setting the structure values and copying
it. This prevents un-initialized padding areas from being copied into the
export area.

Cc: <stable@vger.kernel.org> # 3.14.x-
Reported-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In sha_complete_job, incorrect mcryptd_hash_request_ctx pointer is used
when check and complete other jobs. If the memory of first completed req
is freed, while still completing other jobs in the func, kernel will
crash since NULL pointer is assigned to RIP.

Cc: <stable@vger.kernel.org>
Signed-off-by: NXiaodong Liu <xiaodong.liu@intel.com>
Acked-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The output buffer length has to be at least as big as the key_size.
It is then updated to the actual output size by the implementation.

Cc: <stable@vger.kernel.org>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Pull x86 fixes from Ingo Molnar:
 "Misc fixes: a binutils fix, an lguest fix, an mcelog fix and a missing
  documentation fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mce: Avoid using object after free in genpool
  lguest, x86/entry/32: Fix handling of guest syscalls using interrupt gates
  x86/build: Build compressed x86 kernels as PIE
  x86/mm/pkeys: Add missing Documentation