POWER9 contains an off core mmu called the nest mmu (NMMU). This is
used by other hardware units on the chip to translate virtual
addresses into real addresses. The unit attempting an address
translation provides the majority of the context required for the
translation request except for the base address of the partition table
(ie. the PTCR) which needs to be programmed into the NMMU.

This patch adds a call to OPAL to set the PTCR for the nest mmu in
opal_init().
Signed-off-by: NAlistair Popple <alistair@popple.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Use kmalloc_array(), which checks for overflow of the multiplication,
rather than doing it by hand.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The OPAL memory console is reported to be size zero, as we do not
initialise the struct attr with any size information due to the size
being variable. This leads users to think that the console is empty.

Instead report the maximum size.
Signed-off-by: NJoel Stanley <joel@jms.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This was entirely automated, using the script by Al:

  PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>'
  sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \
        $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h)

to do the replacement at the end of the merge window.
Requested-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Some tracepoints have a registration function that gets enabled when the
tracepoint is enabled. There may be cases that the registraction function
must fail (for example, can't allocate enough memory). In this case, the
tracepoint should also fail to register, otherwise the user would not know
why the tracepoint is not working.

Cc: David Howells <dhowells@redhat.com>
Cc: Seiji Aguchi <seiji.aguchi@hds.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

Commit 2965faa5 ("kexec: split kexec_load syscall from kexec core
code") introduced CONFIG_KEXEC_CORE so that CONFIG_KEXEC means whether
the kexec_load system call should be compiled-in and CONFIG_KEXEC_FILE
means whether the kexec_file_load system call should be compiled-in.
These options can be set independently from each other.

Since until now powerpc only supported kexec_load, CONFIG_KEXEC and
CONFIG_KEXEC_CORE were synonyms. That is not the case anymore, so we
need to make a distinction. Almost all places where CONFIG_KEXEC was
being used should be using CONFIG_KEXEC_CORE instead, since
kexec_file_load also needs that code compiled in.
Signed-off-by: NThiago Jung Bauermann <bauerman@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This defines real-mode versions of opal_int_get_xirr(), opal_int_eoi()
and opal_int_set_mfrr(), for use by KVM real-mode code.

It also exports opal_int_set_mfrr() so that the modular part of KVM
can use it to send IPIs.
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

PHB, PE (and by association MVE) numbers are printed as a mix of decimal
and hexadecimal throughout the kernel.  This can be misleading, so make
them all hexadecimal.

Standardising on hex instead of dec because:

 - PHB numbers are presented in hex in sysfs/debugfs (and lspci, etc)
 - PE numbers are presented as hex in sysfs and parsed in hex in debugfs

The only place I think this could cause confusing are the messages during
boot, i.e.

	pci 000a:01     : [PE# 000] Secondary bus 1 associated with PE#0

which can be a quick way to check PE numbers.  pe_level_printk() will
only print two characters instead of three, so the above would be

	pci 000a:01     : [PE# 00] Secondary bus 1 associated with PE#0

which gives a hint it's in hex.
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Whenever a PE is initialised in powernv, opal_pci_eeh_freeze_clear() is
called.  This is to remove any existing freeze, and has no negative side
effects if the PE is already in an unfrozen state.  On PHB backends that
don't support this operation and return OPAL_UNSUPPORTED, this creates a
scary and misleading warning message.

Skip the warning message on init if OPAL_UNSUPPORTED is returned.

As far as I'm aware, this currently only affects NPUs.

Fixes: 313483dd ("powerpc/powernv: Unfreeze PE on allocation")
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Acked-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This condenses the opal node searching into a single function that finds
all compatible nodes, instead of just searching the ibm,opal children,
for ipmi, flash, and prd similar to how opal-i2c nodes are found.
Signed-off-by: NJack Miller <jack@codezen.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This fixes warning reported from sparse:

  pci-ioda.c:451:49: warning: incorrect type in argument 2 (different base types)

Fixes: 262af557 ("powerpc/powernv: Enable M64 aperatus for PHB3")
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This fixes the warnings reported from sparse:

  pci.c:312:33: warning: restricted __be64 degrades to integer
  pci.c:313:33: warning: restricted __be64 degrades to integer

Fixes: cee72d5b ("powerpc/powernv: Display diag data on p7ioc EEH errors")
Cc: stable@vger.kernel.org # v3.3+
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The hub diag-data type is filled with big-endian data by OPAL call
opal_pci_get_hub_diag_data(). We need convert it to CPU-endian value
before using it. The issue is reported by sparse as pointed by Michael
Ellerman:

  eeh-powernv.c:1309:21: warning: restricted __be16 degrades to integer

This converts hub diag-data type to CPU-endian before using it in
pnv_eeh_get_and_dump_hub_diag().

Fixes: 2a485ad7 ("powerpc/powernv: Drop PHB operation next_error()")
Cc: stable@vger.kernel.org # v4.1+
Suggested-by: NMichael Ellerman <mpe@ellerman.id.au>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NRussell Currey <ruscur@russell.cc>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The PE number (@frozen_pe_no), filled by opal_pci_next_error() is in
big-endian format. It should be converted to CPU-endian before it is
passed to opal_pci_eeh_freeze_clear() when clearing the frozen state if
the PE is invalid one. As Michael Ellerman pointed out, the issue is
also detected by sparse:

  eeh-powernv.c:1541:41: warning: incorrect type in argument 2 (different base types)

This passes CPU-endian PE number to opal_pci_eeh_freeze_clear() and it
should be part of commit <0f36db77> ("powerpc/eeh: Fix wrong printed
PE number"), which was merged to 4.3 kernel.

Fixes: 71b540ad ("powerpc/powernv: Don't escalate non-existing frozen PE")
Cc: stable@vger.kernel.org # v4.3+
Suggested-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Reviewed-by: NRussell Currey <ruscur@russell.cc>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This unfreezes PE when it's initialized because the PE might be put
into frozen state in the last hot remove path. It's not harmful to
do so if the PE is already in unfrozen state.
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When issuing PHB reset, OPAL API opal_pci_poll() is called to drive
the state machine in OPAL forward. However, we needn't always call
the function under some circumstances like reset deassert.

This avoids calling opal_pci_poll() when OPAL_SUCCESS is returned
from opal_pci_reset(). Except the overhead introduced by additional
one unnecessary OPAL call, I didn't run into real issue because of
this.
Reported-by: NPridhiviraj Paidipeddi <ppaiddipe@in.ibm.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Signed-off-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When the PE used in pnv_eeh_reset() is that of a VF,
pnv_eeh_reset_vf_pe() is used.  Unlike the other reset functions called
in pnv_eeh_reset(), the VF reset doesn't require a bus, and if a bus was
missing the function would error out before resetting the VF PE.

To avoid this, reorder the VF reset function to occur before finding and
checking the bus.
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

eeh_pe_bus_get() can return NULL if a PCI bus isn't found for a given PE.
Some callers don't check this, and can cause a null pointer dereference
under certain circumstances.

Fix this by checking NULL everywhere eeh_pe_bus_get() is called.

Fixes: 8a6b1bc7 ("powerpc/eeh: EEH core to handle special event")
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

On EEH events the kernel will print a dump of relevant registers.
If EEH is unavailable (i.e. CONFIG_EEH is disabled, a new platform
doesn't have EEH support, etc) this information isn't readily available.

Add a new debugfs handler to trigger a PHB register dump, so that this
information can be made available on demand.
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Reviewed-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit 5958d19a checks for prefetchable m64 BARs by comparing the
addresses instead of using resource flags.  This broke SR-IOV as the m64
check in pnv_pci_ioda_fixup_iov_resources() fails.

The condition in pnv_pci_window_alignment() also changed to checking
only IORESOURCE_MEM_64 instead of both IORESOURCE_MEM_64 and
IORESOURCE_PREFETCH.

Revert these cases to the previous behaviour, adding a new helper function
to do so.  This is named pnv_pci_is_m64_flags() to make it clear this
function is only looking at resource flags and should not be relied on for
non-SRIOV resources.

Fixes: 5958d19a ("Fix incorrect PE reservation attempt on some 64-bit BARs")
Reported-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NRussell Currey <ruscur@russell.cc>
Tested-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

NO_IRQ has been == 0 on powerpc for just over ten years (since commit
0ebfff14 ("[POWERPC] Add new interrupt mapping core and change
platforms to use it")). It's also 0 on most other arches.

Although it's fairly harmless, every now and then it causes confusion
when a driver is built on powerpc and another arch which doesn't define
NO_IRQ. There's at least 6 definitions of NO_IRQ in drivers/, at least
some of which are to work around that problem.

So we'd like to remove it. This is fairly trivial in the arch code, we
just convert:

    if (irq == NO_IRQ)	to	if (!irq)
    if (irq != NO_IRQ)	to	if (irq)
    irq = NO_IRQ;	to	irq = 0;
    return NO_IRQ;	to	return 0;

And a few other odd cases as well.

At least for now we keep the #define NO_IRQ, because there is driver
code that uses NO_IRQ and the fixes to remove those will go via other
trees.

Note we also change some occurrences in PPC sound drivers, drivers/ps3,
and drivers/macintosh.
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In commit f0228c41 ("powerpc/powernv/pci: Fallback to OPAL for TCE
invalidations"), we added logic to fallback to OPAL for doing TCE
invalidations if we can't do it in Linux.

Ben sent a v2 of the patch, containing these additional call sites, but
I had already applied v1 and didn't notice. So fix them now.

Fixes: f0228c41 ("powerpc/powernv/pci: Fallback to OPAL for TCE invalidations")
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The PCI hotplug can be part of EEH error recovery. The @pdn and
the device's PE number aren't removed and added afterwords. The
PE number in @pdn should be set to an invalid one. Otherwise, the
PE's device count is decreased on removing devices while failing
to be increased on adding devices. It leads to unbalanced PE's
device count and make normal PCI hotplug path broken.

Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE")
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The PE for root bus (root PE) can be removed because of PCI hot
remove in EEH recovery path for fenced PHB error. We need update
@phb->root_pe_populated accordingly so that the root PE can be
populated again in forthcoming PCI hot add path. Also, the PE
shouldn't be destroyed as it's global and reserved resource.

Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE")
Reported-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Squash a bunch of sparse warnings by making things static.
Reviewed-by: NAndrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: NDaniel Axtens <dja@axtens.net>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When a guest has a PCI pass-through device with an interrupt, it
will direct the interrupt to a particular guest VCPU.  In fact the
physical interrupt might arrive on any CPU, and then get
delivered to the target VCPU in the emulated XICS (guest interrupt
controller), and eventually delivered to the target VCPU.

Now that we have code to handle device interrupts in real mode
without exiting to the host kernel, there is an advantage to having
the device interrupt arrive on the same sub(core) as the target
VCPU is running on.  In this situation, the interrupt can be
delivered to the target VCPU without any exit to the host kernel
(using a hypervisor doorbell interrupt between threads if
necessary).

This patch aims to get passed-through device interrupts arriving
on the correct core by setting the interrupt server in the real
hardware XICS for the interrupt to the first thread in the (sub)core
where its target VCPU is running.  We do this in the real-mode H_EOI
code because the H_EOI handler already needs to look at the
emulated ICS state for the interrupt (whereas the H_XIRR handler
doesn't), and we know we are running in the target VCPU context
at that point.

We set the server CPU in hardware using an OPAL call, regardless of
what the IRQ affinity mask for the interrupt says, and without
updating the affinity mask.  This amounts to saying that when an
interrupt is passed through to a guest, as a matter of policy we
allow the guest's affinity for the interrupt to override the host's.

This is inspired by an earlier patch from Suresh Warrier, although
none of this code came from that earlier patch.
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

This adds a new function pnv_opal_pci_msi_eoi() which does the part of
end-of-interrupt (EOI) handling of an MSI which involves doing an
OPAL call.  This function can be called in real mode.  This doesn't
just export pnv_ioda2_msi_eoi() because that does a call to
icp_native_eoi(), which does not work in real mode.

This also adds a function, is_pnv_opal_msi(), which KVM can call to
check whether an interrupt is one for which we should be calling
pnv_opal_pci_msi_eoi() when we need to do an EOI.

[paulus@ozlabs.org - split out the addition of pnv_opal_pci_msi_eoi()
 from Suresh's patch "KVM: PPC: Book3S HV: Handle passthrough
 interrupts in guest"; added is_pnv_opal_msi(); wrote description.]
Signed-off-by: NSuresh Warrier <warrier@linux.vnet.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@ozlabs.org>

In pnv_ioda_free_pe(), the PE object (including the associated PE
number) is cleared before resetting the corresponding bit in the
PE allocation bitmap. It means PE#0 is always released to the bitmap
wrongly.

This fixes above issue by caching the PE number before the PE object
is cleared.

Fixes: 1e916772 ("powerpc/powernv: Use PE instead of number during setup and release"
Cc: stable@vger.kernel.org # v4.7+
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The compound PE is created to accommodate the devices attached to
one specific PCI bus that consume multiple M64 segments. The compound
PE is made up of one master PE and possibly multiple slave PEs. The
slave PEs should be destroyed when releasing the master PE. A kernel
crash happens when derferencing @pe->pdev on releasing the slave PE
in pnv_ioda_deconfigure_pe().

  # echo 0 > /sys/bus/pci/slots/C7/power
  iommu: Removing device 0000:01:00.1 from group 0
  iommu: Removing device 0000:01:00.0 from group 0
  Unable to handle kernel paging request for data at address 0x00000010
  Faulting instruction address: 0xc00000000005d898
  cpu 0x1: Vector: 300 (Data Access) at [c000000fe8217620]
      pc: c00000000005d898: pnv_ioda_release_pe+0x288/0x610
      lr: c00000000005dbdc: pnv_ioda_release_pe+0x5cc/0x610
      sp: c000000fe82178a0
     msr: 9000000000009033
     dar: 10
   dsisr: 40000000
    current = 0xc000000fe815ab80
    paca    = 0xc00000000ff00400	 softe: 0	 irq_happened: 0x01
      pid   = 2709, comm = sh
  Linux version 4.8.0-rc5-gavin-00006-g745efdb (gwshan@gwshan) \
  (gcc version 4.9.3 (Buildroot 2016.02-rc2-00093-g5ea3bce) ) #586 SMP \
  Tue Sep 6 13:37:29 AEST 2016
  enter ? for help
  [c000000fe8217940] c00000000005d684 pnv_ioda_release_pe+0x74/0x610
  [c000000fe82179e0] c000000000034460 pcibios_release_device+0x50/0x70
  [c000000fe8217a10] c0000000004aba80 pci_release_dev+0x50/0xa0
  [c000000fe8217a40] c000000000704898 device_release+0x58/0xf0
  [c000000fe8217ac0] c000000000470510 kobject_release+0x80/0xf0
  [c000000fe8217b00] c000000000704dd4 put_device+0x24/0x40
  [c000000fe8217b20] c0000000004af94c pci_remove_bus_device+0x12c/0x150
  [c000000fe8217b60] c000000000034244 pci_hp_remove_devices+0x94/0xd0
  [c000000fe8217ba0] c0000000004ca444 pnv_php_disable_slot+0x64/0xb0
  [c000000fe8217bd0] c0000000004c88c0 power_write_file+0xa0/0x190
  [c000000fe8217c50] c0000000004c248c pci_slot_attr_store+0x3c/0x60
  [c000000fe8217c70] c0000000002d6494 sysfs_kf_write+0x94/0xc0
  [c000000fe8217cb0] c0000000002d50f0 kernfs_fop_write+0x180/0x260
  [c000000fe8217d00] c0000000002334a0 __vfs_write+0x40/0x190
  [c000000fe8217d90] c000000000234738 vfs_write+0xc8/0x240
  [c000000fe8217de0] c000000000236250 SyS_write+0x60/0x110
  [c000000fe8217e30] c000000000009524 system_call+0x38/0x108

It fixes the kernel crash by bypassing releasing resources (DMA,
IO and memory segments, PELTM) because there are no resources assigned
to the slave PE.

Fixes: c5f7700b ("powerpc/powernv: Dynamically release PE")
Reported-by: NFrederic Barrat <fbarrat@linux.vnet.ibm.com>
Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

In a situation, where Linux kernel gets notified about duplicate error log
from OPAL, it is been observed that kernel fails to remove sysfs entries
(/sys/firmware/opal/elog/0xXXXXXXXX) of such error logs. This is because,
we currently search the error log/dump kobject in the kset list via
'kset_find_obj()' routine. Which eventually increment the reference count
by one, once it founds the kobject.

So, unless we decrement the reference count by one after it found the kobject,
we would not be able to release the kobject properly later.

This patch adds the 'kobject_put()' which was missing earlier.
Signed-off-by: NMukesh Ojha <mukesh02@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Reviewed-by: NVasant Hegde <hegdevasant@linux.vnet.ibm.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Unsigned type is always non-negative, so the loop could not end in case
condition is never true.

The problem has been detected using semantic patch
scripts/coccinelle/tests/unsigned_lesser_than_zero.cocci
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

The generic allocation code may sometimes decide to assign a prefetchable
64-bit BAR to the M32 window. In fact it may also decide to allocate
a 64-bit non-prefetchable BAR to the M64 one ! So using the resource
flags as a test to decide which window was used for PE allocation is
just wrong and leads to insane PE numbers.

Instead, compare the addresses to figure it out.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
[mpe: Rename the function as agreed by Ben & Gavin]
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

When machine check occurs with MSR(RI=0), it means MC interrupt is
unrecoverable and kernel goes down to panic path. But the console
message still shows it as recovered. This patch fixes the MCE console
messages.

Fixes: 36df96f8 ("powerpc/book3s: Decode and save machine check event.")
Signed-off-by: NMahesh Salgaonkar <mahesh@linux.vnet.ibm.com>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

Commit fd141d1a ("powerpc/powernv/pci: Rework accessing the TCE
invalidate register") broke TCE invalidation on IODA2/PHB3 for real
mode.

This makes invalidate work again.

Fixes: fd141d1a ("powerpc/powernv/pci: Rework accessing the TCE invalidate register")
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

This sets the type of the interrupt appropriately. We set it as follow:

 - If not mapped from the device-tree, we use edge. This is the case
of the virtual interrupts and PCI MSIs for example.

 - If mapped from the device-tree and #interrupt-cells is 2 (PAPR
compliant), we use the second cell to set the appropriate type

 - If mapped from the device-tree and #interrupt-cells is 1 (current
OPAL on P8 does that), we assume level sensitive since those are
typically going to be the PSI LSIs which are level sensitive.

Additionally, we mark the interrupts requested via the opal_interrupts
property all level. This is a bit fishy but the best we can do until we
fix OPAL to properly expose them with a complete descriptor. It is also
correct for the current HW anyway as OPAL interrupts are currently PCI
error and PSI interrupts which are level.

Finally now that edge interrupts are properly identified, we can enable
CONFIG_HARDIRQS_SW_RESEND which will make the core re-send them if
they occur while masked, which some drivers rely upon.

This fixes issues with lost interrupts on some Mellanox adapters.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

The dma-mapping core and the implementations do not change the DMA
attributes passed by pointer.  Thus the pointer can point to const data.
However the attributes do not have to be a bitfield.  Instead unsigned
long will do fine:

1. This is just simpler.  Both in terms of reading the code and setting
   attributes.  Instead of initializing local attributes on the stack
   and passing pointer to it to dma_set_attr(), just set the bits.

2. It brings safeness and checking for const correctness because the
   attributes are passed by value.

Semantic patches for this change (at least most of them):

    virtual patch
    virtual context

    @r@
    identifier f, attrs;

    @@
    f(...,
    - struct dma_attrs *attrs
    + unsigned long attrs
    , ...)
    {
    ...
    }

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

and

    // Options: --all-includes
    virtual patch
    virtual context

    @r@
    identifier f, attrs;
    type t;

    @@
    t f(..., struct dma_attrs *attrs);

    @@
    identifier r.f;
    @@
    f(...,
    - NULL
    + 0
     )

Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.comSigned-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Acked-by: NVineet Gupta <vgupta@synopsys.com>
Acked-by: NRobin Murphy <robin.murphy@arm.com>
Acked-by: NHans-Christian Noren Egtvedt <egtvedt@samfundet.no>
Acked-by: Mark Salter <msalter@redhat.com> [c6x]
Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris]
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm]
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp]
Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core]
Acked-by: David Vrabel <david.vrabel@citrix.com> [xen]
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb]
Acked-by: Joerg Roedel <jroedel@suse.de> [iommu]
Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon]
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k]
Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390]
Acked-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32]
Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc]
Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu]
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The iommu_table_ops::exchange() callback writes new TCE to the table and
returns old value and permission mask. The old TCE value is correctly
converted from BE to CPU endian; however permission mask was calculated
from BE value and therefore always returned DMA_NONE which could cause
memory leak on LE systems using VFIO SPAPR TCE IOMMU v1 driver.

This fixes pnv_tce_xchg() to have @oldtce a CPU endian.

Fixes: 05c6cfb9 ("powerpc/iommu/powernv: Release replaced TCE")
Signed-off-by: NAlexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

It is now called right after platform probe, so the probe function
can just do the job.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>

We no long need the machine type that early, so we can move probe_machine()
to after the device-tree has been expanded. This will allow further
consolidation.
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>