Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 11 9月, 2012 1 次提交
    • I
      perf tools: Use __maybe_used for unused variables · 1d037ca1
      由 Irina Tirdea 提交于 
      perf defines both __used and __unused variables to use for marking
unused variables. The variable __used is defined to
__attribute__((__unused__)), which contradicts the kernel definition to
__attribute__((__used__)) for new gcc versions. On Android, __used is
also defined in system headers and this leads to warnings like: warning:
'__used__' attribute ignored

__unused is not defined in the kernel and is not a standard definition.
If __unused is included everywhere instead of __used, this leads to
conflicts with glibc headers, since glibc has a variables with this name
in its headers.

The best approach is to use __maybe_unused, the definition used in the
kernel for __attribute__((unused)). In this way there is only one
definition in perf sources (instead of 2 definitions that point to the
same thing: __used and __unused) and it works on both Linux and Android.
This patch simply replaces all instances of __used and __unused with
__maybe_unused.
Signed-off-by: NIrina Tirdea <irina.tirdea@intel.com>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung.kim@lge.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1347315303-29906-7-git-send-email-irina.tirdea@intel.com
[ committer note: fixed up conflict with a116e05d in builtin-sched.c ]
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      1d037ca1
  3. 09 9月, 2012 1 次提交
  5. 20 8月, 2012 1 次提交
  7. 25 7月, 2012 2 次提交
  9. 31 5月, 2012 1 次提交
  11. 18 5月, 2012 1 次提交
    • J
      perf hists: Fix callchain ip printf format · a0187060
      由 Jiri Olsa 提交于 
      The callchain address is stored as u64. Current code uses following
format string to display callchain address:

  "%p\n", (void *)(long)chain->ip

This way we lose upper 32 bits if we report 64 bit addresses in 32 bit
environment. Fixing this to always display whole 64 bits.

Note, running following to test perf endianity handling:
test 1)
  - origin system:
    # perf record -a -- sleep 10 (any perf record will do)
    # perf report > report.origin
    # perf archive perf.data

  - copy the perf.data, report.origin and perf.data.tar.bz2
    to a target system and run:
    # tar xjvf perf.data.tar.bz2 -C ~/.debug
    # perf report > report.target
    # diff -u report.origin report.target

  - the diff should produce no output
    (besides some white space stuff and possibly different
     date/TZ output)

test 2)
  - origin system:
    # perf record -ag -fo /tmp/perf.data -- sleep 1
  - mount origin system root to the target system on /mnt/origin
  - target system:
    # perf script --symfs /mnt/origin -I -i /mnt/origin/tmp/perf.data \
     --kallsyms /mnt/origin/proc/kallsyms
  - complete perf.data header is displayed
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1337151548-2396-8-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      a0187060
  13. 06 4月, 2012 1 次提交
    • D
      perf hists: Catch and handle out-of-date hist entry maps. · 63fa471d
      由 David Miller 提交于 
      When a process exec()'s, all the maps are retired, but we keep the hist
entries around which hold references to those outdated maps.

If the same library gets mapped in for which we have hist entries, a new
map will be created.  But when we take a perf entry hit within that map,
we'll find the existing hist entry with the older map.

This causes symbol translations to be done incorrectly.  For example,
the perf entry processing will lookup the correct uptodate map entry and
use that to calculate the symbol and DSO relative address.  But later
when we update the histogram we'll translate the address using the
outdated map file instead leading to conditions such as out-of-range
offsets in symbol__inc_addr_samples().

Therefore, update the map of the hist_entry dynamically at lookup/
creation time.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Cc: stable@kernel.org
Link: http://lkml.kernel.org/r/20120327.031418.1220315351537060808.davem@davemloft.netSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      63fa471d
  15. 27 3月, 2012 1 次提交
    • F
      perf tools: Fix display of first level of callchains · 6d4818c5
      由 Frederic Weisbecker 提交于 
      The callchain stdio mode display was written using a sorted by symbol
report. In this mode we have only one callchain root per hist so we
forgot to handle cases where we have multiple callchain root, as in per
dso sorting for example.

Fix this by handling these roots like any other branch, with the hist as
the parent.

Before:

     1.97%  libpthread-2.12.1.so
            |
            --- __libc_write
                create_worker
                bench_sched_messaging
                cmd_bench
                run_builtin
                main
                __libc_start_main

            |
            --- __libc_read
                create_worker
                bench_sched_messaging
                cmd_bench
                run_builtin
                main
                __libc_start_main

After:

     1.97%  libpthread-2.12.1.so
            |
            |--36.97%-- __libc_write
            |          create_worker
            |          bench_sched_messaging
            |          cmd_bench
            |          run_builtin
            |          main
            |          __libc_start_main
            |
            |--31.47%-- __libc_read
            |          create_worker
            |          bench_sched_messaging
            |          cmd_bench
            |          run_builtin
            |          main
            |          __libc_start_main
           ...

Single roots keep their entry without percentage because they have
the same overhead than the hist they refer to. ie: 100% in fractal
mode and the percentage of the hist in graph mode:

     0.00%  [k] reschedule_interrupt
            |
            --- default_idle
                amd_e400_idle
                cpu_idle
                start_secondary
Reported-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1332526010-15400-1-git-send-email-fweisbec@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      6d4818c5
  17. 23 3月, 2012 1 次提交
  19. 17 3月, 2012 1 次提交
  21. 14 3月, 2012 1 次提交
  23. 09 3月, 2012 1 次提交
  25. 08 1月, 2012 1 次提交
    • N
      perf report: Fix --stdio output alignment when --showcpuutilization used · 0ed35abc
      由 Namhyung Kim 提交于 
      Current perf report output is broken if --showcpuutilization is used.
Combination with -n and/or --show-total-period make things worse.
This patch fixes it as follows:

before:
    48.25%    48.25%     0.00%    sleep  [kernel.kallsyms]  [k] trace_hardirqs_off
    34.99%    34.99%     0.00%    sleep  [kernel.kallsyms]  [k] __find_get_block_slow
    15.99%    15.99%     0.00%    sleep  [kernel.kallsyms]  [k] lock_release_holdtime
     0.77%     0.77%     0.00%    sleep  [kernel.kallsyms]  [k] native_write_msr_safe

after:
    48.25%    48.25%     0.00%    sleep  [kernel.kallsyms]  [k] trace_hardirqs_off
    34.99%    34.99%     0.00%    sleep  [kernel.kallsyms]  [k] __find_get_block_slow
    15.99%    15.99%     0.00%    sleep  [kernel.kallsyms]  [k] lock_release_holdtime
     0.77%     0.77%     0.00%    sleep  [kernel.kallsyms]  [k] native_write_msr_safe

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1325957132-10600-8-git-send-email-namhyung@gmail.comSigned-off-by: NNamhyung Kim <namhyung@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0ed35abc
  27. 07 1月, 2012 2 次提交
  29. 16 11月, 2011 1 次提交
    • A
      perf python: Fix undefined symbol problem · 0e2a5f10
      由 Arnaldo Carvalho de Melo 提交于 
      Recently we made perf_evsel__init call hists__init, which broke the perf
python binding:

[root@emilia linux]# ./tools/perf/python/twatch.py
Traceback (most recent call last):
  File "./tools/perf/python/twatch.py", line 16, in <module>
    import perf
ImportError: /home/acme/git/build/perf/python/perf.so: undefined symbol: hists__init

Fix it by moving the hists__init function to its only caller, evsel.c.

This way we avoid dragging in other parts of tools/perf/util/ to the
perf python binding.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-5nffmdt5mu6ozxgj54oi4qon@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      0e2a5f10
  31. 27 10月, 2011 1 次提交
  33. 20 10月, 2011 2 次提交
  35. 19 10月, 2011 3 次提交
  37. 17 10月, 2011 1 次提交
  39. 13 10月, 2011 2 次提交
  41. 08 10月, 2011 2 次提交
    • S
      perf tools: Fix broken number of samples for perf report -n · e39622ce
      由 Stephane Eranian 提交于 
      The perf report -n option was broken because it was not reporting the
correct number of samples depending on the sorting mode. By default,
samples are sorted by comm,dso,sym. That means that samples for the same
command (binary) get collapsed.

The hists__collapse_insert_entry() had a bug whereby it was aggregating
the number of events observed (periods) but not the number of samples.
Consequently, the number of samples reported could be below reality. The
percentage remained correct because based on the periods.

This patch fixes the problem by also aggregating the number of samples.
Here is an example:

$ perf report -n --stdio
    12.38%        842     pong  [kernel.kallsyms]     [k] __lock_acquire

Here pong (a ctxsw stress test), is the only program running
and thus it is the only one responsible for the lock_acquire samples.

If we change the sorting mode:

$ perf report -n --stdio --sort=sym
    12.38%       1732  [k] __lock_acquire

The actual number of samples is shown.

With the fix:

$ perf report -n --stdio
    12.38%       1732     pong  [kernel.kallsyms]     [k] __lock_acquire

Cc: David Ahern <dsahern@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20111003093815.GA6393@quadSigned-off-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e39622ce
    • A
      perf top: Reuse the 'report' hist_entry/hists classes · ab81f3fd
      由 Arnaldo Carvalho de Melo 提交于 
      This actually fixes several problems we had in the old 'perf top':

1. Unresolved symbols not show, limitation that came from the old
   "KernelTop" codebase, to solve it we would need to do changes
   that would make sym_entry have most of the hist_entry fields.
2. It was using the number of samples, not the sum of sample->period.

And brings the --sort code that allows us to have all the views in
'perf report', for instance:

[root@emilia ~]# perf top --sort dso
PerfTop: 5903 irqs/sec kernel:77.5% exact: 0.0% [1000Hz cycles], (all, 8 CPUs)
------------------------------------------------------------------------------

    31.59%  libcrypto.so.1.0.0
    21.55%  [kernel]
    18.57%  libpython2.6.so.1.0
     7.04%  libc-2.12.so
     6.99%  _backend_agg.so
     4.72%  sshd
     1.48%  multiarray.so
     1.39%  libfreetype.so.6.3.22
     1.37%  perf
     0.71%  libgobject-2.0.so.0.2200.5
     0.53%  [tg3]
     0.48%  libglib-2.0.so.0.2200.5
     0.44%  libstdc++.so.6.0.13
     0.40%  libcairo.so.2.10800.8
     0.38%  libm-2.12.so
     0.34%  umath.so
     0.30%  libgdk-x11-2.0.so.0.1800.9
     0.22%  libpthread-2.12.so
     0.20%  libgtk-x11-2.0.so.0.1800.9
     0.20%  librt-2.12.so
     0.15%  _path.so
     0.13%  libpango-1.0.so.0.2800.1
     0.11%  libatlas.so.3.0
     0.09%  ft2font.so
     0.09%  libpangoft2-1.0.so.0.2800.1
     0.08%  libX11.so.6.3.0
     0.07%  [vdso]
     0.06%  cyclictest
^C

All the filter lists can be used as well: --dsos, --comms, --symbols,
etc.

The 'perf report' TUI is also reused, being possible to apply all the
zoom operations, do annotation, etc.

This change will allow multiple simplifications in the symbol system as
well, that will be detailed in upcoming changesets.

Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-xzaaldxq7zhqrrxdxjifk1mh@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ab81f3fd
  43. 07 10月, 2011 4 次提交
  45. 30 6月, 2011 2 次提交
    • F
      perf tools: Don't display ignored entries on stdio ui · e84d2122
      由 Frederic Weisbecker 提交于 
      As for newt ui, don't display entries that have been marked
as ignored.

The practical current effect of this is to make parent
filtering really working. Before, entries that were ignored
were given a null parent but were still displayed. This
resulted in some weird effects:

 # Overhead      Command      Shared Object        Symbol
 # ........  ...........  .................  ............
 #
^A
                   |
                   --- __lock_acquire
                      |
                      |--95.97%-- lock_acquire
                      |          |
                      |          |--30.75%-- _raw_spin_lock

Discard these from the stdio display.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Sam Liao <phyomh@gmail.com>
      e84d2122
    • S
      perf tools: Add inverted call graph report support. · d797fdc5
      由 Sam Liao 提交于 
      Add "caller/callee" option to support inverted butterfly report,
in the inverted report (with caller option), the call graph start
from the callee's ancestor. Users can use such view to catch system's
performance bottleneck from a sysprof like view. Using this option
with specified sort order like pid gives us high level view of call
graph statistics.

Also add "-G" alias for inverted call graph.
Signed-off-by: NSam Liao <phyomh@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
      d797fdc5
  47. 07 3月, 2011 1 次提交
    • A
      perf tools: Improve support for sessions with multiple events · e248de33
      由 Arnaldo Carvalho de Melo 提交于 
      By creating an perf_evlist out of the attributes in the perf.data file
header, so that we can use evlists and evsels when reading recorded
sessions in addition to when we record sessions.

More work is needed to allow tools to allow the user to select which
events are wanted when browsing sessions, be it just one or a subset of
them, aggregated or showed at the same time but with different
indications on the UI to allow seeing workloads thru different views at
the same time.

But the overall goal/trend is to more uniformly use evsels and evlists.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      e248de33
  49. 06 3月, 2011 1 次提交
    • A
      perf hists: Remove needless global col lenght calcs · d7603d51
      由 Arnaldo Carvalho de Melo 提交于 
      To support multiple events we need to do these calcs per 'struct hists'
instance, and it turns out we already do that at:

	__hists__add_entry
		hists__inc_nr_entries
			hists__calc_col_len

for all the unfiltered hist_entry instances we stash in the rb tree, so
trow away the dead code.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      d7603d51
  51. 25 2月, 2011 1 次提交
    • A
      perf hists: Print number of samples, not the period sum · 69cf0218
      由 Arnaldo Carvalho de Melo 提交于 
      So that we match the header where we state the number of events with the
"Samples" column when using 'perf report -n/--show-nr-samples':

 [root@emilia ~]# perf record -a sleep 1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ]
 [root@emilia ~]# perf report --stdio --show-nr-samples
 # Events: 11  cycles
 #
 # Overhead  Samples        Command       Shared Object                        Symbol
 # ........ ..........  ...........  ..................  ............................
 #
     16.65%          1        sleep  [kernel.kallsyms]   [k] unmap_vmas
     16.10%          1         perf  libpthread-2.12.so  [.] __pthread_cleanup_push_defer
     15.79%          2         perf  [kernel.kallsyms]   [k] format_decode
     12.88%          1  kworker/1:2  [kernel.kallsyms]   [k] cache_reap
     10.69%          1      swapper  [kernel.kallsyms]   [k] _raw_spin_lock
      7.55%          1        sleep  [kernel.kallsyms]   [k] prepare_exec_creds
      6.00%          1         perf  [jbd2]              [k] start_this_handle
      5.29%          1         perf  [kernel.kallsyms]   [k] seq_read
      4.75%          1         perf  [kernel.kallsyms]   [k] get_pid_task
      4.30%          1         perf  [kernel.kallsyms]   [k] _raw_spin_unlock_irqrestore

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [root@emilia ~]#
Reported-by: NStephane Eranian <eranian@google.com>
Reported-by: NCliff Wickman <cpw@sgi.com>
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: <stable@kernel.org>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
[ cherry-picked it from perf/core, as it has been reported by others as well. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      69cf0218
  53. 17 2月, 2011 1 次提交
    • A
      perf hists: Print number of samples, not the period sum · fec9cbd1
      由 Arnaldo Carvalho de Melo 提交于 
      So that we match the header where we state the number of events with the
"Samples" column when using 'perf report -n/--show-nr-samples':

 [root@emilia ~]# perf record -a sleep 1
 [ perf record: Woken up 1 times to write data ]
 [ perf record: Captured and wrote 0.111 MB perf.data (~4860 samples) ]
 [root@emilia ~]# perf report --stdio --show-nr-samples
 # Events: 11  cycles
 #
 # Overhead  Samples        Command       Shared Object                        Symbol
 # ........ ..........  ...........  ..................  ............................
 #
     16.65%          1        sleep  [kernel.kallsyms]   [k] unmap_vmas
     16.10%          1         perf  libpthread-2.12.so  [.] __pthread_cleanup_push_defer
     15.79%          2         perf  [kernel.kallsyms]   [k] format_decode
     12.88%          1  kworker/1:2  [kernel.kallsyms]   [k] cache_reap
     10.69%          1      swapper  [kernel.kallsyms]   [k] _raw_spin_lock
      7.55%          1        sleep  [kernel.kallsyms]   [k] prepare_exec_creds
      6.00%          1         perf  [jbd2]              [k] start_this_handle
      5.29%          1         perf  [kernel.kallsyms]   [k] seq_read
      4.75%          1         perf  [kernel.kallsyms]   [k] get_pid_task
      4.30%          1         perf  [kernel.kallsyms]   [k] _raw_spin_unlock_irqrestore

 #
 # (For a higher level overview, try: perf report --sort comm,dso)
 #
 [root@emilia ~]#
Reported-by: NStephane Eranian <eranian@google.com>
Acked-by: NStephane Eranian <eranian@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      fec9cbd1
  55. 09 2月, 2011 1 次提交
    • A
      perf annotate: Move locking to struct annotation · ce6f4fab
      由 Arnaldo Carvalho de Melo 提交于 
      Since we'll need it when implementing the live annotate TUI browser.

This also simplifies things a bit by having the list head for the source
code to be in the dynamicly allocated part of struct annotation, that
way we don't have to pass it around, it can be found from the struct
symbol that is passed everywhere.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      ce6f4fab
  57. 05 2月, 2011 1 次提交
    • A
      perf annotate: Support multiple histograms in annotation · 2f525d01
      由 Arnaldo Carvalho de Melo 提交于 
      The perf annotate tool continues aggregating everything on just one
histograms, but to support the top model add support for one histogram
perf evsel in the evlist.

Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
LKML-Reference: <new-submission>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
      2f525d01