- 20 4月, 2007 3 次提交
-
-
由 Divy Le Ray 提交于
Remove assumption that PHY interrupts use GPIOs 3 and 5. Deal with PHY interrupts connected to any GPIO pins. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Divy Le Ray 提交于
Reuse the incoming skb when a clientless abort req is recieved. The release of RDMA connections HW resources might be deferred in low memory situations. Ensure that no further activity is passed up to the RDMA driver for these connections. Signed-off-by: NDivy Le Ray <divy@chelsio.com> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm由 Linus Torvalds 提交于
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/avi/kvm: KVM: Fix off-by-one when writing to a nonpae guest pde
-
- 19 4月, 2007 5 次提交
-
-
由 Avi Kivity 提交于
Nonpae guest pdes are shadowed by two pae ptes, so we double the offset twice: once to account for the pte size difference, and once because we need to shadow pdes for a single guest pde. But when writing to the upper guest pde we also need to truncate the lower bits, otherwise the multiply shifts these bits into the pde index and causes an access to the wrong shadow pde. If we're at the end of the page (accessing the very last guest pde) we can even overflow into the next host page and oops. Signed-off-by: NAvi Kivity <avi@qumranet.com>
-
由 Denis Lunev 提交于
There is a race between netlink_dump_start() and netlink_release() that can lead to the situation when a netlink socket with non-zero callback is freed. Here it is: CPU1: CPU2 netlink_release(): netlink_dump_start(): sk = netlink_lookup(); /* OK */ netlink_remove(); spin_lock(&nlk->cb_lock); if (nlk->cb) { /* false */ ... } spin_unlock(&nlk->cb_lock); spin_lock(&nlk->cb_lock); if (nlk->cb) { /* false */ ... } nlk->cb = cb; spin_unlock(&nlk->cb_lock); ... sock_orphan(sk); /* * proceed with releasing * the socket */ The proposal it to make sock_orphan before detaching the callback in netlink_release() and to check for the sock to be SOCK_DEAD in netlink_dump_start() before setting a new callback. Signed-off-by: NDenis Lunev <den@openvz.org> Signed-off-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NPavel Emelianov <xemul@openvz.org> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Olaf Kirch 提交于
This patch fixes an oops first reported in mid 2006 - see http://lkml.org/lkml/2006/8/29/358 The cause of this bug report is that when an error is signalled on the socket, irda_recvmsg_stream returns without removing a local wait_queue variable from the socket's sk_sleep queue. This causes havoc further down the road. In response to this problem, a patch was made that invoked sock_orphan on the socket when receiving a disconnect indication. This is not a good fix, as this sets sk_sleep to NULL, causing applications sleeping in recvmsg (and other places) to oops. This is against the latest net-2.6 and should be considered for -stable inclusion. Signed-off-by: NOlaf Kirch <olaf.kirch@oracle.com> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Yasevich 提交于
The way partial delivery is currently implemnted, it is possible to intereleave a message (either from another steram, or unordered) that is not part of partial delivery process. The only way to this is for a message to not be a fragment and be 'in order' or unorderd for a given stream. This will result in bypassing the reassembly/ordering queues where things live duing partial delivery, and the message will be delivered to the socket in the middle of partial delivery. This is a two-fold problem, in that: 1. the app now must check the stream-id and flags which it may not be doing. 2. this clearing partial delivery state from the association and results in ulp hanging. This patch is a band-aid over a much bigger problem in that we don't do stream interleave. Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Make sure to actually assign the determined mode to rq->sadb_x_ipsecrequest_mode. Noticed by Joe Perches. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 4月, 2007 25 次提交
-
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [BRIDGE]: Unaligned access when comparing ethernet addresses [SCTP]: Unmap v4mapped addresses during SCTP_BINDX_REM_ADDR operation. [SCTP]: Fix assertion (!atomic_read(&sk->sk_rmem_alloc)) failed message [NET]: Set a separate lockdep class for neighbour table's proxy_queue [NET]: Fix UDP checksum issue in net poll mode. [KEY]: Fix conversion between IPSEC_MODE_xxx and XFRM_MODE_xxx. [NET]: Get rid of alloc_skb_from_cache
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: IB/mthca: Fix data corruption after FMR unmap on Sinai
-
git://one.firstfloor.org/home/andi/git/linux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://one.firstfloor.org/home/andi/git/linux-2.6: [PATCH] x86: Fix potential overflow in perfctr reservation [PATCH] x86: Fix gcc 4.2 _proxy_pda workaround
-
由 Olof Johansson 提交于
* Last write during i2c_xfer is of the wrong byte (off-by-1). * Read length is wrong for some of the reads (mistakenly used the PEC version) Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
Looks like a local change I made to be able to test-compile the i2c-pasemi driver leaked upstream. Signed-off-by: NJean Delvare <khali@linux-fr.org> Acked-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jean Delvare 提交于
Users have been complaining about the w83627ehf driver flooding their logs with debug messages like: w83627ehf 9191-0a10: Increasing fan 4 clock divider from 64 to 128 or: w83627ehf 9191-0290: Increasing fan 4 clock divider from 4 to 8 The reason is that we failed to actually write the LSB of the encoded clock divider value for that fan, causing the next read to report the same old value again and again. Additionally, the fan number was improperly reported, making the bug harder to find. Signed-off-by: NJean Delvare <khali@linux-fr.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Russell King 提交于
Provide an dummy implementation of devm_ioport_map() and devm_ioport_unmap() to allow drivers (eg, pata_platform) to build for platforms where CONFIG_NO_IOPORT is selected. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 NeilBrown 提交于
sk_info_authunix is not being protected properly so the object that it points to can be cache_put twice, leading to corruption. We borrow svsk->sk_defer_lock to provide the protection. We should probably rename that lock to have a more generic name - later. Thanks to Gabriel for reporting this. Cc: Greg Banks <gnb@melbourne.sgi.com> Cc: Gabriel Barazer <gabriel@oxeva.fr> Signed-off-by: NNeil Brown <neilb@suse.de> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andrew Morton 提交于
It got its lock and unlock backwards. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=8334 (obviously, this code could be using plain old spin_lock_irq(), too) Cc: <matthias.kaehlcke@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeniy Dushistov 提交于
This patch should fix or partly fix this bug: http://bugzilla.kernel.org/show_bug.cgi?id=8276 The problem is: - if we see "zero link case" during reading inode operation, we call ufs_error(which remount fs readonly), but not "mark" inode as bad (1) - in readonly case we do not fill some data structures, which are used in read and write case (2) - VFS call ufs_delete_inode if link count is zero (3) so (1)->(3)->(2) cause oops, this patch should fix such scenario Signed-off-by: NEvgeniy Dushistov <dushistov@mail.ru> Cc: Jim Paris <jim@jtan.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ben Dooks 提交于
It turns out that the last patch to change set_cs to be kept in the controller's structure instead of the platform data was an incomplete change, and did not change the references to platfrom data in the setup xfer code. (This can prevent an oops.) Reported-by: <Ling.Alex@iac.com.tw> Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
Override compiler .arch directive for generic kernel build. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: NRichard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
arch/alpha/kernel/sys_sx164.c Earlier firmware revisions need MVI fix as well. arch/alpha/kernel/sys_nautilus.c On UP1500 firmware reports wrong AGP IRQ (10 instead of 5). This causes interrupt storm if there is a PCI device that uses IRQ 5. Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Ivan Kokshaysky 提交于
Files: arch/alpha/kernel/core_mcpcia.c arch/alpha/kernel/sys_rawhide.c include/asm-alpha/core_mcpcia.h Determine correct hose configuration; RAWHIDE family can have 2 or 4 hoses, so make sure non-existent hoses are ignored. arch/alpha/kernel/err_titan.c Supply a needed #include <asm/irq_regs.h> arch/alpha/kernel/module.c Add some useful output to the relocation overflow messages. arch/alpha/kernel/sys_noritake.c Supply necessary noritake_end_irq() to correct interrupt handling. This fixes a problem first noted by hangs during boot probing with a DE500-BA TULIP NIC present. arch/alpha/kernel/sys_sio.c Correct saving of original PIRQ register (PCI IRQ routing); change default PIRQ setting to leave PCI IRQs 9 and 14 free to be used for sound (Multia) and IDE (any), respectively. include/asm-alpha/io.h Supply the "isa_virt_to_bus" routine. Signed-off-by: NJay Estabrook <jay.estabrook@hp.com> Signed-off-by: NIvan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Benjamin Herrenschmidt 提交于
While digging through my MAP_FIXED changes, I found that rather obvious bug in /dev/mem mmap implementation for nommu archs. get_unmapped_area() is expected to return an address, not a pfn. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Acked-By: NDavid Howells <dhowells@redhat.com> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Randy Dunlap 提交于
Make kernel-doc comments match macro names. Correct parameter names in a few places. Remove '#' from beginning of kernel-doc comment macro names. Remove extra (erroneous) blank lines in kernel-doc. Warning(plist.h:100): Cannot understand * #PLIST_HEAD_INIT - static struct plist_head initializer on line 100 - I thought it was a doc line Warning(plist.h:112): Cannot understand * #PLIST_NODE_INIT - static struct plist_node initializer on line 112 - I thought it was a doc line Warning(plist.h:103): No description found for parameter '_lock' Warning(plist.h:129): No description found for parameter 'lock' Warning(plist.h:158): No description found for parameter 'pos' Warning(plist.h:169): No description found for parameter 'pos' Warning(plist.h:169): No description found for parameter 'n' Warning(plist.h:179): No description found for parameter 'mem' This still leaves one warning & one error that need attention: Error(plist.h:219): cannot understand prototype: '(' Warning(plist.h): no structured comments found Acked-by: NInaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com> Cc: Daniel Walker <dwalker@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Alan Cox 提交于
The patch checks for "|" in the pattern not the output and doesn't nail a pid on to a piped name (as it is a program name not a file) Also fixes a very very obscure security corner case. If you happen to have decided on a core pattern that starts with the program name then the user can run a program called "|myevilhack" as it stands. I doubt anyone does this. Signed-off-by: NAlan Cox <alan@redhat.com> Confirmed-by: NChristopher S. Aker <caker@theshore.net> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Don Zickus 提交于
Trivial change to pass vmsplice arguments through the compat layer on pp64. Signed-off-by: NDon Zickus <dzickus@redhat.com> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NPaul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Evgeny Kravtsunov 提交于
compare_ether_addr() implicitly requires that the addresses passed are 2-bytes aligned in memory. This is not true for br_stp_change_bridge_id() and br_stp_recalculate_bridge_id() in which one of the addresses is unsigned char *, and thus may not be 2-bytes aligned. Signed-off-by: NEvgeny Kravtsunov <emkravts@openvz.org> Signed-off-by: NKirill Korotaev <dev@openvz.org> Signed-off-by: NPavel Emelianov <xemul@openvz.org>
-
由 Paolo Galtieri 提交于
During the sctp_bindx() call to add additional addresses to the endpoint, any v4mapped addresses are converted and stored as regular v4 addresses. However, when trying to remove these addresses, the v4mapped addresses are not converted and the operation fails. This patch unmaps the addresses on during the remove operation as well. Signed-off-by: NPaolo Galtieri <pgaltieri@mvista.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tsutomu Fujii 提交于
In current implementation, LKSCTP does receive buffer accounting for data in sctp_receive_queue and pd_lobby. However, LKSCTP don't do accounting for data in frag_list when data is fragmented. In addition, LKSCTP doesn't do accounting for data in reasm and lobby queue in structure sctp_ulpq. When there are date in these queue, assertion failed message is printed in inet_sock_destruct because sk_rmem_alloc of oldsk does not become 0 when socket is destroyed. Signed-off-by: NTsutomu Fujii <t-fujii@nb.jp.nec.com> Signed-off-by: NVlad Yasevich <vladislav.yasevich@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pavel Emelianov 提交于
Otherwise the following calltrace will lead to a wrong lockdep warning: neigh_proxy_process() `- lock(neigh_table->proxy_queue.lock); arp_redo /* via tbl->proxy_redo */ arp_process neigh_event_ns neigh_update skb_queue_purge `- lock(neighbor->arp_queue.lock); This is not a deadlock actually, as neighbor table's proxy_queue and the neighbor's arp_queue are different queues. Lockdep thinks there is a deadlock as both queues are initialized with skb_queue_head_init() and thus have a common class. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aubrey.Li 提交于
In net poll mode, the current checksum function doesn't consider the kind of packet which is padded to reach a specific minimum length. I believe that's the problem causing my test case failed. The following patch fixed this issue. Signed-off-by: NAubrey.Li <aubreylee@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Kazunori MIYAZAWA 提交于
We should not blindly convert between IPSEC_MODE_xxx and XFRM_MODE_xxx just by incrementing / decrementing because the assumption is not true any longer. Signed-off-by: NKazunori MIYAZAWA <miyazawa@linux-ipv6.org> Singed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
-
由 Herbert Xu 提交于
Since this was added originally for Xen, and Xen has recently (~2.6.18) stopped using this function, we can safely get rid of it. Good timing too since this function has started to bit rot. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 4月, 2007 5 次提交
-
-
由 Badari Pulavarty 提交于
cache_k8_northbridges() is storing config values to incorrect locations (in flush_words) and also its overflowing beyond the allocation, causing slab verification failures. Signed-off-by: NBadari Pulavarty <pbadari@us.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michael S. Tsirkin 提交于
In mthca_arbel_fmr_unmap(), the high bits of the key are masked off. This gets rid of the effect of adjust_key(), which makes sure that bits 3 and 23 of the key are equal when the Sinai throughput optimization is enabled, and so it may happen that an FMR will end up with bits 3 and 23 in the key being different. This causes data corruption, because when enabling the throughput optimization, the driver promises the HCA firmware that bits 3 and 23 of all memory keys will always be equal. Fix by re-applying adjust_key() after masking the key. Thanks to Or Gerlitz for reproducing the problem, and Ariel Shahar for help in debug. Signed-off-by: NMichael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: NRoland Dreier <rolandd@cisco.com>
-
由 Linus Torvalds 提交于
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4313/1: S3C24XX: Update s3c2410 defconfig to 2.6.21-rc6 [ARM] Update mach-types
-
由 Ben Dooks 提交于
Update defconfig to the latest kernel version and enable the h1940 LED driver Signed-off-by: NBen Dooks <ben-linux@fluff.org> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Russell King 提交于
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 4月, 2007 2 次提交
-
-
由 Andi Kleen 提交于
While reviewing this code again I found a potential overflow of the bitmap. The p4 oprofile can theoretically set bits beyond the reservation bitmap for specific configurations. Avoid that by sizing the bitmaps properly. Signed-off-by: NAndi Kleen <ak@suse.de>
-
由 Andi Kleen 提交于
Due to an over aggressive optimizer gcc 4.2 cannot optimize away _proxy_pda in all cases (counter intuitive, but true). This breaks loading of some modules. The earlier workaround to just export a dummy symbol didn't work unfortunately because the module code ignores exports with 0 value. Make it 1 instead. Signed-off-by: NAndi Kleen <ak@suse.de>
-