Rename rtl_apply_firmware() to r8169_apply_firmware() before exporting
it to avoid namespace clashes with other drivers for Realtek hardware.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Pass the phy_device as parameter to rtl8168d_apply_firmware_cond(),
this avoids having to access rtl8169_private internals.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace rtl_writephy and rtl_readphy with the respective phylib
functions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace rtl_w0w1_phy with phylib functions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace rtl_patchphy with phylib functions.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move configuring EEE on MAC side out of the PHY configuration.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Writing this ERI register is a MAC setting, so move it to
rtl_hw_start_8106().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Switch rtl_writephy_batch() to phylib functions, as a result we can
avoid passing a rtl8169_private parameter.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions use only the phy_device member of rtl8169_private,
so we can pass the phy_device as parameter directly.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

These functions use only the phy_device member of rtl8169_private,
so we can pass the phy_device as parameter directly.
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preparation of factoring out rtl8169scd_hw_phy_config() move this
quirk to rtl8169_init_phy().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove a useless debug statement. This also allows to remove the
net_device parameter from rtl8169_init_phy().
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In preperation of factoring out the PHY configuration to a separate
source file this patch:
- avoids accessing rtl8169_private internals by passing the phy_device
  and mac_version as separate parameters
- renames rtl_hw_phy_config to r8169_hw_phy_config to avoid namespace
  clashes with other drivers for Realtek hardware
Signed-off-by: NHeiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If FPE is supposed to be disabled we need to return after disabling it.

Fixes: 7c728274 ("net: stmmac: gmac5+: Add support for Frame Preemption")
Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

If FPE is supposed to be disabled we need to return after disabling it.

Fixes: f0e56c8d ("net: stmmac: xgmac3+: Add support for Frame Preemption")
Signed-off-by: NJose Abreu <Jose.Abreu@synopsys.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Includes a couple of filtering functions and also renames a constant.

Style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Functions are not related.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Various ethtool entry points are moved.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Page recycling code and GRO packet receipt code were moved.

One function contains code extracted from another.

Code style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The code that handles transmission finalization will also be common.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

All members of mdio_bus_data are cleared to 0 when it was obtained
by devm_kzalloc(). so It doesn't need to set phy_mask as 0 again.
Signed-off-by: NDejin Zheng <zhengdejin5@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the driver ensures that the firmware version found on the
device matches the branch of the required version.

Remove this limitation so that the driver will accept the required
version or a newer version, from any branch.

This will allow us to reduce the frequency in which we need to update
the required version. New firmware versions that include necessary bug
fixes will be able to work with the driver, even if they are not from
the required branch.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The version adds support for 2x50 Gb/s port split option on SN3800
systems.
Signed-off-by: NIdo Schimmel <idosch@mellanox.com>
Acked-by: NJiri Pirko <jiri@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A few bits were extracted from other functions.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Before calling certain function pointers, check that they are non-NULL.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One function's prototype was changed in the header.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A function was split, the others were renamed.

Code style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

A function was split, the others were renamed.

Code style fixes included.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

One function was renamed here, the other contains code extracted from
another.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Various functions dealing with flow control, forward error correction,
polling, port number, and PHY testing.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

They just convert between different sets of flags/registers.
Some block comments were adjusted.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The moved code handles MCDI port link state and capabilities.
Signed-off-by: NAlexandru-Mihai Maftei <amaftei@solarflare.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch modify MDIO read/write functions to support
communication with C45 PHY.
Signed-off-by: NMilind Parab <mparab@cadence.com>
Reviewed-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NNicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The `connected` value for wired devices was not properly initialized,
it must be set to `true` upon creation, because wired devices do not
generate connection events.

When a raw client (the Steam Client) uses the device, the input device
is destroyed. Then, when the raw client finishes, it must be recreated.
But since the `connected` variable was false this never happended.
Signed-off-by: NRodrigo Rivas Costa <rodrigorivascosta@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

param->rx_mini_pending is __u32 variable, it will never
be less than zero.
Signed-off-by: Nyuehaibing <yuehaibing@huawei.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the driver is built-in but ipv6 is a module, the flower
support produces a link error:

drivers/net/ethernet/netronome/nfp/flower/tunnel_conf.o: In function `nfp_tunnel_keep_alive_v6':
tunnel_conf.c:(.text+0x2aa8): undefined reference to `nd_tbl'

Add a Kconfig dependency to avoid that configuration.

Fixes: 9ea9bfa1 ("nfp: flower: support ipv6 tunnel keep-alive messages from fw")
Acked-by: NJakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>