1. 13 6月, 2016 1 次提交
    • C
      KVM: s390/mm: Fix CMMA reset during reboot · 1c343f7b
      Christian Borntraeger 提交于
      commit 1e133ab2 ("s390/mm: split arch/s390/mm/pgtable.c") factored
      out the page table handling code from __gmap_zap and  __s390_reset_cmma
      into ptep_zap_unused and added a simple flag that tells which one of the
      function (reset or not) is to be made. This also changed the behaviour,
      as it also zaps unused page table entries on reset.
      Turns out that this is wrong as s390_reset_cmma uses the page walker,
      which DOES NOT take the ptl lock.
      
      The most simple fix is to not do the zapping part on reset (which uses
      the walker)
      Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
      Fixes: 1e133ab2 ("s390/mm: split arch/s390/mm/pgtable.c")
      Cc: stable@vger.kernel.org # 4.6+
      Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
      1c343f7b
  2. 12 6月, 2016 8 次提交
    • L
      Linux 4.7-rc3 · 5edb5649
      Linus Torvalds 提交于
      5edb5649
    • L
      Merge branch 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux · 57120fac
      Linus Torvalds 提交于
      Pull thermal management fixes from Zhang Rui:
      
       - fix an ordering issue in cpu cooling that cooling device is
         registered before it's ready (freq_table being populated).
         (Lukasz Luba)
      
       - fix a missing comment update (Caesar Wang)
      
      * 'for-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
        thermal: add the note for set_trip_temp
        thermal: cpu_cooling: fix improper order during initialization
      57120fac
    • L
      Merge branch 'for-linus' of git://git.kernel.dk/linux-block · 8714f8f5
      Linus Torvalds 提交于
      Pull block layer fixes from Jens Axboe:
       "A small collection of fixes for the current series.  This contains:
      
         - Two fixes for xen-blkfront, from Bob Liu.
      
         - A bug fix for NVMe, releasing only the specific resources we
           requested.
      
         - Fix for a debugfs flags entry for nbd, from Josef.
      
         - Plug fix from Omar, fixing up a case of code being switched between
           two functions.
      
         - A missing bio_put() for the new discard callers of
           submit_bio_wait(), fixing a regression causing a leak of the bio.
           From Shaun.
      
         - Improve dirty limit calculation precision in the writeback code,
           fixing a case where setting a limit lower than 1% of memory would
           end up being zero.  From Tejun"
      
      * 'for-linus' of git://git.kernel.dk/linux-block:
        NVMe: Only release requested regions
        xen-blkfront: fix resume issues after a migration
        xen-blkfront: don't call talk_to_blkback when already connected to blkback
        nbd: pass the nbd pointer for flags debugfs
        block: missing bio_put following submit_bio_wait
        blk-mq: really fix plug list flushing for nomerge queues
        writeback: use higher precision calculation in domain_dirty_limits()
      8714f8f5
    • L
      Merge tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio · 3a7c114d
      Linus Torvalds 提交于
      Pull GPIO fixes from Linus Walleij:
       "A new bunch of GPIO fixes for v4.7.
      
        This time I am very grateful that Ricardo Ribalda Delgado went in and
        fixed my stupid refcounting mistakes in the removal path for GPIO
        chips.  I had a feeling something was wrong here and so it was.  It
        exploded on OMAP and it fixes their problem.  Now it should be (more)
        solid.
      
        The rest i compilation, Kconfig and driver fixes.  Some tagged for
        stable.
      
        Summary:
      
         - Fix a NULL pointer dereference when we are searching the GPIO
           device list but one of the devices have been removed (struct
           gpio_chip pointer is NULL).
      
         - Fix unaligned reference counters: we were ending on +3 after all
           said and done.  It should be 0.  Remove an extraneous get_device(),
           and call cdev_del() followed by device_del() in gpiochip_remove()
           instead and the count goes to zero and calls the release() function
           properly.
      
         - Fix a compile warning due to a missing #include in the OF/device
           tree portions.
      
         - Select ANON_INODES for GPIOLIB, we're using that for our character
           device.  Some randconfig tests disclosed the problem.
      
         - Make sure the Zynq driver clock runs also without CONFIG_PM enabled
      
         - Fix an off-by-one error in the 104-DIO-48E driver
      
         - Fix warnings in bcm_kona_gpio_reset()"
      
      * tag 'gpio-v4.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
        gpio: bcm-kona: fix bcm_kona_gpio_reset() warnings
        gpio: select ANON_INODES
        gpio: include <linux/io-mapping.h> in gpiolib-of
        gpiolib: Fix unaligned used of reference counters
        gpiolib: Fix NULL pointer deference
        gpio: zynq: initialize clock even without CONFIG_PM
        gpio: 104-dio-48e: Fix control port offset computation off-by-one error
      3a7c114d
    • L
      Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi · 45b00c94
      Linus Torvalds 提交于
      Pull SCSI fixes from James Bottomley:
       "Two current fixes:
      
         - one affects Qemu CD ROM emulation, which stopped working after the
           updates in SCSI to require VPD pages from all conformant devices.
      
           Fix temporarily by blacklisting Qemu (we can relax later when they
           come into compliance).
      
         - The other is a fix to the optimal transfer size.  We set up a
           minefield for ourselves by being confused about whether the limits
           are in bytes or sectors (SCSI optimal is in blocks and the queue
           parameter is in bytes).
      
           This tries to fix the problem (wrong setting for queue limits
           max_sectors) and make the problem more obvious by introducing a
           wrapper function"
      
      * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
        sd: Fix rw_max for devices that report an optimal xfer size
        scsi: Add QEMU CD-ROM to VPD Inquiry Blacklist
      45b00c94
    • L
      Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 5d1f7023
      Linus Torvalds 提交于
      Pull i2c fixes from Wolfram Sang:
      
       - a bigger fix for i801 to finally be able to be loaded on some
         machines again
      
       - smaller driver fixes
      
       - documentation update because of a renamed file
      
      * 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
        i2c: mux: reg: Provide of_match_table
        i2c: mux: refer to i2c-mux.txt
        i2c: octeon: Avoid printk after too long SMBUS message
        i2c: octeon: Missing AAK flag in case of I2C_M_RECV_LEN
        i2c: i801: Allow ACPI SystemIO OpRegion to conflict with PCI BAR
      5d1f7023
    • L
      Merge tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux · 90735c99
      Linus Torvalds 提交于
      Pull DeviceTree fixes from Rob Herring:
      
       - fix unflatten_dt_nodes when dad parameter is set.
      
       - add vendor prefixes for TechNexion and UniWest
      
       - documentation fix for Marvell BT
      
       - OF IRQ kerneldoc fixes
      
       - restrict CMA alignment adjustments to non dma-coherent
      
       - a couple of warning fixes in reserved-memory code
      
       - DT maintainers updates
      
      * tag 'devicetree-fixes-for-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
        drivers: of: add definition of early_init_dt_alloc_reserved_memory_arch
        drivers/of: Fix depth for sub-tree blob in unflatten_dt_nodes()
        drivers: of: Fix of_pci.h header guard
        dt-bindings: Add vendor prefix for TechNexion
        of: add vendor prefix for UniWest
        dt: bindings: fix documentation for MARVELL's bt-sd8xxx wireless device
        of: add missing const for of_parse_phandle_with_args() in !CONFIG_OF
        of: silence warnings due to max() usage
        drivers: of: of_reserved_mem: fixup the CMA alignment not to affect dma-coherent
        of: irq: fix of_irq_get[_byname]() kernel-doc
        MAINTAINERS: DeviceTree maintainer updates
      90735c99
    • L
      Merge tag '20160610_uvc_compat_for_linus' of... · f1c32afd
      Linus Torvalds 提交于
      Merge tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux
      
      Pull uvc compat XU ioctl fixes from Andy Lutomirski:
       "uvc's compat XU ioctls go through tons of potentially buggy
        indirection.  The first patch removes the indirection.  The second one
        cleans up the code.
      
        Compile-tested only.  I have the hardware, but I have absolutely no
        idea what XU does, how to use it, what software to recompile as
        32-bit, or what to test in that software"
      
      * tag '20160610_uvc_compat_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/luto/linux:
        uvc_v4l2: Simplify compat ioctl implementation
        uvc: Forward compat ioctls to their handlers directly
      f1c32afd
  3. 11 6月, 2016 16 次提交
  4. 10 6月, 2016 15 次提交
    • L
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net · 698ea54d
      Linus Torvalds 提交于
      Pull networking fixes from David Miller:
      
       1) nfnetlink timestamp taken from wrong skb, fix from Florian Westphal.
      
       2) Revert some msleep conversions in rtlwifi as these spots are in
          atomic context, from Larry Finger.
      
       3) Validate that NFTA_SET_TABLE attribute is actually specified when we
          call nf_tables_getset().  From Phil Turnbull.
      
       4) Don't do mdio_reset in stmmac driver with spinlock held as that can
          sleep, from Vincent Palatin.
      
       5) sk_filter() does things other than run a BPF filter, so we should
          not elide it's call just because sk->sk_filter is NULL.  Fix from
          Eric Dumazet.
      
       6) Fix missing backlog updates in several packet schedulers, from Cong
          Wang.
      
       7) bnx2x driver should allow VLAN add/remove while the interface is
          down, from Michal Schmidt.
      
       8) Several RDS/TCP race fixes from Sowmini Varadhan.
      
       9) fq_codel scheduler doesn't return correct queue length in dumps,
          from Eric Dumazet.
      
      10) Fix TCP stats for tail loss probe and early retransmit in ipv6, from
          Yuchung Cheng.
      
      11) Properly initialize udp_tunnel_socket_cfg in l2tp_tunnel_create(),
          from Guillaume Nault.
      
      12) qfq scheduler leaks SKBs if a kzalloc fails, fix from Florian
          Westphal.
      
      13) sock_fprog passed into PACKET_FANOUT_DATA needs compat handling,
          from Willem de Bruijn.
      
      * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (85 commits)
        vmxnet3: segCnt can be 1 for LRO packets
        packet: compat support for sock_fprog
        stmmac: fix parameter to dwmac4_set_umac_addr()
        net/mlx5e: Fix blue flame quota logic
        net/mlx5e: Use ndo_stop explicitly at shutdown flow
        net/mlx5: E-Switch, always set mc_promisc for allmulti vports
        net/mlx5: E-Switch, Modify node guid on vf set MAC
        net/mlx5: E-Switch, Fix vport enable flow
        net/mlx5: E-Switch, Use the correct error check on returned pointers
        net/mlx5: E-Switch, Use the correct free() function
        net/mlx5: Fix E-Switch flow steering capabilities check
        net/mlx5: Fix flow steering NIC capabilities check
        net/mlx5: Fix root flow table update
        net/mlx5: Fix MLX5_CMD_OP_MAX to be defined correctly
        net/mlx5: Fix masking of reserved bits in XRCD number
        net/mlx5: Fix the size of modify QP mailbox
        mlxsw: spectrum: Don't sleep during ndo_get_phys_port_name()
        mlxsw: spectrum: Make split flow match firmware requirements
        wext: Fix 32 bit iwpriv compatibility issue with 64 bit Kernel
        cfg80211: remove get/set antenna and tx power warnings
        ...
      698ea54d
    • L
      Merge tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound · 729d3784
      Linus Torvalds 提交于
      Pull sound fixes from Takashi Iwai:
       "We have only few, mainly HD-audio device-specific fixes.  Realtek
        codec driver got a slightly more LOC, but they are all for the new
        codec chip, and won't affect others at all"
      
      * tag 'sound-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
        ALSA: hda - Add PCI ID for Kabylake
        ALSA: hda/realtek: Add T560 docking unit fixup
        ALSA: hda - Fix headset mic detection problem for Dell machine
        ALSA: uapi: Add three missing header files to Kbuild file
        ALSA: hda/realtek - Add support for new codecs ALC700/ALC701/ALC703
        ALSA: hda/realtek - ALC256 speaker noise issue
      729d3784
    • L
      Merge tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux · 00da9008
      Linus Torvalds 提交于
      Pull drm fixes from Dave Airlie:
       "This weeks instalment of fixes:
      
        amdgpu:
           Lots of memory leak and firmware leak fixes
      
        nouveau:
           Collection of display fixes, KASAN fixes
      
        vc4:
           vblank/pageflipping fixes
      
        fsl-dcu:
           Regmap cache fix
      
        omap:
           Unused variable warning fix.
      
        Nothing too surprising so far"
      
      * tag 'drm-fixes-for-v4.7-rc3' of git://people.freedesktop.org/~airlied/linux: (46 commits)
        drm/amdgpu: fix warning with powerplay disabled.
        drm/amd/powerplay: delete useless code as pptable changed in vbios.
        drm/amd/powerplay: fix bug visit array out of bounds
        drm/amdgpu: fix smu ucode memleak (v2)
        drm/amdgpu: add release firmware for cgs
        drm/amdgpu: fix tonga smu_fini mem leak
        drm/amdgpu: fix fiji smu fini mem leak
        drm/amdgpu: fix cik sdma ucode memleak
        drm/amdgpu: fix sdma24 ucode mem leak
        drm/amdgpu: fix sdma3 ucode mem leak
        drm/amdgpu: fix uvd fini mem leak
        drm/amdgpu: fix gfx 7 ucode mem leak
        drm/amdgpu: fix gfx8 ucode mem leak
        drm/amdgpu: fix missing free wb for cond_exec
        drm/amdgpu: fix memleak in pptable_init
        drm/amdgpu: fix mem leak in atombios
        drm/amdgpu: fix mem leak in pplib/hwmgr
        drm/amdgpu: fix mem leak in smumgr
        drm/amdgpu: add pipeline sync while vmid switch in same ctx
        drm/amdgpu: vBIOS post only call when mem_size zero
        ...
      00da9008
    • L
      Merge tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · f758bbd4
      Linus Torvalds 提交于
      Pull ACPI fix from Rafael Wysocki:
       "A recently introduced boot regression related to the ACPI EC
        initialization is addressed by restoring the previous behavior (Lv
        Zheng)"
      
      * tag 'acpi-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPI / EC: Fix a boot EC regresion by restoring boot EC support for the DSDT EC
      f758bbd4
    • L
      Merge tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · 524a3f2c
      Linus Torvalds 提交于
      Pull power management fixes from Rafael Wysocki:
       "Stable-candidate fixes for the intel_pstate driver and the cpuidle
        core.
      
        Specifics:
      
         - Fix two intel_pstate initialization issues, one of which was
           introduced during the 4.4 cycle (Srinivas Pandruvada)
      
         - Fix kernel build with CONFIG_UBSAN set and CONFIG_CPU_IDLE unset
           (Catalin Marinas)"
      
      * tag 'pm-4.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        cpufreq: intel_pstate: Fix ->set_policy() interface for no_turbo
        cpufreq: intel_pstate: Fix code ordering in intel_pstate_set_policy()
        cpuidle: Do not access cpuidle_devices when !CONFIG_CPU_IDLE
      524a3f2c
    • L
      Merge branch 'akpm' (patches from Andrew) · 9557c3cf
      Linus Torvalds 提交于
      Merge misc fixes from Andrew Morton:
       "7 fixes"
      
      * emailed patches from Andrew Morton <akpm@linux-foundation.org>:
        mm/fadvise.c: do not discard partial pages with POSIX_FADV_DONTNEED
        mm: introduce dedicated WQ_MEM_RECLAIM workqueue to do lru_add_drain_all
        kernel/relay.c: fix potential memory leak
        mm: thp: broken page count after commit aa88b68c
        revert "mm: memcontrol: fix possible css ref leak on oom"
        kasan: change memory hot-add error messages to info messages
        mm/hugetlb: fix huge page reserve accounting for private mappings
      9557c3cf
    • R
      x86/ioapic: Fix incorrect pointers in ioapic_setup_resources() · 9d98bcec
      Rui Wang 提交于
      On a 4-socket Brickland system, hot-removing one ioapic is fine.
      Hot-removing the 2nd one causes panic in mp_unregister_ioapic()
      while calling release_resource().
      
      It is because the iomem_res pointer has already been released
      when removing the first ioapic.
      
      To explain the use of &res[num] here: res is assigned to ioapic_resources,
      and later in ioapic_insert_resources() we do:
      
      	struct resource *r = ioapic_resources;
      
              for_each_ioapic(i) {
                      insert_resource(&iomem_resource, r);
                      r++;
              }
      
      Here 'r' is treated as an arry of 'struct resource', and the r++ ensures
      that each element of the array is inserted separately. Thus we should call
      release_resouce() on each element at &res[num].
      
      Fix it by assigning the correct pointers to ioapics[i].iomem_res in
      ioapic_setup_resources().
      Signed-off-by: NRui Wang <rui.y.wang@intel.com>
      Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
      Cc: tony.luck@intel.com
      Cc: linux-pci@vger.kernel.org
      Cc: rjw@rjwysocki.net
      Cc: linux-acpi@vger.kernel.org
      Cc: bhelgaas@google.com
      Link: http://lkml.kernel.org/r/1465369193-4816-3-git-send-email-rui.y.wang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      9d98bcec
    • A
      x86/entry/traps: Don't force in_interrupt() to return true in IST handlers · aaee8c3c
      Andy Lutomirski 提交于
      Forcing in_interrupt() to return true if we're not in a bona fide
      interrupt confuses the softirq code.  This fixes warnings like:
      
        NOHZ: local_softirq_pending 282
      
      ... which can happen when running things like selftests/x86.
      
      This will change perf's static percpu buffer usage in IST context.
      I think this is okay, and it's changing the behavior to match
      historical (pre-4.0) behavior.
      Signed-off-by: NAndy Lutomirski <luto@kernel.org>
      Cc: Andy Lutomirski <luto@amacapital.net>
      Cc: Borislav Petkov <bp@alien8.de>
      Cc: Brian Gerst <brgerst@gmail.com>
      Cc: Denys Vlasenko <dvlasenk@redhat.com>
      Cc: H. Peter Anvin <hpa@zytor.com>
      Cc: Linus Torvalds <torvalds@linux-foundation.org>
      Cc: Oleg Nesterov <oleg@redhat.com>
      Cc: Peter Zijlstra <peterz@infradead.org>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: stable@vger.kernel.org
      Fixes: 95927475 ("x86, traps: Track entry into and exit from IST context")
      Link: http://lkml.kernel.org/r/cdc215f94d118d691d73df35275022331156fb45.1464130360.git.luto@kernel.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>
      aaee8c3c
    • S
      vmxnet3: segCnt can be 1 for LRO packets · 50219538
      Shrikrishna Khare 提交于
      The device emulation may send segCnt of 1 for LRO packets.
      Signed-off-by: NShrikrishna Khare <skhare@vmware.com>
      Signed-off-by: NJin Heo <heoj@vmware.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      50219538
    • W
      packet: compat support for sock_fprog · 719c44d3
      Willem de Bruijn 提交于
      Socket option PACKET_FANOUT_DATA takes a struct sock_fprog as argument
      if PACKET_FANOUT has mode PACKET_FANOUT_CBPF. This structure contains
      a pointer into user memory. If userland is 32-bit and kernel is 64-bit
      the two disagree about the layout of struct sock_fprog.
      
      Add compat setsockopt support to convert a 32-bit compat_sock_fprog to
      a 64-bit sock_fprog. This is analogous to compat_sock_fprog support for
      SO_REUSEPORT added in commit 19575988 ("soreuseport: add compat
      case for setsockopt SO_ATTACH_REUSEPORT_CBPF").
      Reported-by: NDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: NWillem de Bruijn <willemb@google.com>
      Acked-by: NDaniel Borkmann <daniel@iogearbox.net>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      719c44d3
    • B
      stmmac: fix parameter to dwmac4_set_umac_addr() · ca8bdaf1
      Ben Dooks 提交于
      The dwmac4_set_umac_addr() takes a struct mac_device_info as
      the first parameter, but is being passed a ioaddr instead from
      dwmac4_set_filter(). Fix the warning/bug by changing the first
      parameter.
      
      drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46: warning: incorrect type in argument 1 (different address spaces)
      drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    expected struct mac_device_info *hw
      drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c:159:46:    got void [noderef] <asn:2>*ioaddr
      
      Note, only compile tested this as do not have any
      hardware with it in.
      Signed-off-by: NBen Dooks <ben.dooks@codethink.co.uk>
      Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      ca8bdaf1
    • D
      Merge branch 'mlx5-fixes' · 8618e6e7
      David S. Miller 提交于
      Saeed Mahameed says:
      
      ====================
      Mellanox 100G mlx5 fixes for 4.7-rc
      
      The following series provides some small fixes for mlx5 driver.
      
      Two small fixes for the mlx5e netdev, the 1st is for the blue flame
      quota accounting and the 2nd is a small refactoring in shutdown flow.
      
      Five trivial fixes for mlx5 E-Switch.
      	- Allmulti mc_promisc flag was not set in a specific flow.
      	- Modify VF node guid when admin mac is changed.
      	- Race in vport enable flow.
      	- Misc code fixes (kvfree when needed and error pointers checking).
      
      Three in mlx5 steering area.  Correct capabilities checking and root flow table update.
      
      Three misc fixes in mlx5 commands enum and layouts.
      ====================
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      8618e6e7
    • E
      net/mlx5e: Fix blue flame quota logic · 0ca00fc1
      Eli Cohen 提交于
      Blue flame is a latency enhancement feature that allows the driver to
      write the packet data directly to the NIC's registers thus making the
      read of the packet data from host memory redundant.
      
      We maintain a quota for the blue flame which is reloaded whenever we
      identify that the hardware is processing send requests and processes
      them fast enough so by the time we post the next send request it was
      able to process all the pending ones. This indicates that the hardware
      is capable of processing more blue flame requests efficiently. The blue
      flame quota is decremented whenever we send using blue flame.
      
      The current code erroneously clears the budget if we did not use blue
      flame for the current post send operation and we fix it here.
      
      Fixes: 88a85f99 ('net/mlx5e: TX latency optimization to save DMA reads')
      Signed-off-by: NEli Cohen <eli@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0ca00fc1
    • E
      net/mlx5e: Use ndo_stop explicitly at shutdown flow · 811afeaa
      Eran Ben Elisha 提交于
      The current implementation copies the flow of ndo_stop instead of
      calling it explicitly, Fixed it.
      
      Fixes: 5fc7197d ("net/mlx5: Add pci shutdown callback")
      Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      811afeaa
    • M
      net/mlx5: E-Switch, always set mc_promisc for allmulti vports · 62e3c24a
      Mohamad Haj Yahia 提交于
      Set the mc_promisc flag also in the case of adding new mc address to
      existing allmulti vport.
      
      Fixes: a35f71f2 ('net/mlx5: E-Switch, Implement promiscuous rx modes vf request handling')
      Signed-off-by: NMohamad Haj Yahia <mohamad@mellanox.com>
      Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
      Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      62e3c24a