- 29 1月, 2012 1 次提交
-
-
由 Julia Lawall 提交于
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. In au1100fb.c, the probe function now returns -ENODEV on failure. Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Acked-by: NManuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 08 12月, 2011 1 次提交
-
-
由 Manuel Lauss 提交于
These 3 boards are very similar; with this patch a single kernel image which runs on all three can be built. Tested on DB1500 and DB1100. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> To: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/2872/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 03 10月, 2011 1 次提交
-
-
由 Manuel Lauss 提交于
Removes some bitrot from the au1100fb driver and fix it up so it works again. Signed-off-by: NManuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: NFlorian Tobias Schandinat <FlorianSchandinat@gmx.de>
-
- 10 6月, 2011 1 次提交
-
-
由 Joe Perches 提交于
Several fixes as well where the +1 was missing. Done via coccinelle scripts like: @@ struct resource *ptr; @@ - ptr->end - ptr->start + 1 + resource_size(ptr) and some grep and typing. Mostly uncompiled, no cross-compilers. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 27 7月, 2010 1 次提交
-
-
由 Ralf Baechle 提交于
WARNING: drivers/video/built-in.o(.data+0x360): Section mismatch in reference from the variable au1100fb_driver to the function .init.text:au1100fb_drv_probe() The variable au1100fb_driver references the function __init au1100fb_drv_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Fixing which triggers of a slew of further mismatches: WARNING: drivers/video/built-in.o(.devinit.text+0xc0): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_fix The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_fix. If au1100fb_fix is only used by au1100fb_drv_probe then annotate au1100fb_fix with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x21c): Section mismatch in reference from the function au1100fb_drv_probe() to the variable .init.data:au1100fb_var The function __devinit au1100fb_drv_probe() references a variable __initdata au1100fb_var. If au1100fb_var is only used by au1100fb_drv_probe then annotate au1100fb_var with a matching annotation. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 23 9月, 2009 1 次提交
-
-
由 Julia Lawall 提交于
Check that the result of kmalloc is not NULL before passing it to other functions. The semantic match that finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression *x; identifier f; constant char *C; @@ x = \(kmalloc\|kcalloc\|kzalloc\)(...); ... when != x == NULL when != x != NULL when != (x || ...) ( kfree(x) | f(...,C,...,x,...) | *f(...,x,...) | *x->f ) // </smpl> [akpm@linux-foundation.org: convert to kstrdup() as well] Signed-off-by: NJulia Lawall <julia@diku.dk> Cc: Ming Lei <tom.leiming@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 25 3月, 2009 1 次提交
-
-
由 Ming Lei 提交于
This patch fixes the bug reported in http://bugzilla.kernel.org/show_bug.cgi?id=11681. "Lots of device drivers register a 'struct device_driver' with the '.bus' member set to '&platform_bus_type'. This is wrong, since the platform_bus functions expect the 'struct device_driver' to be wrapped up in a 'struct platform_driver' which provides some additional callbacks (like suspend_late, resume_early). The effect may be that platform_suspend_late() uses bogus data outside the device_driver struct as a pointer pointer to the device driver's suspend_late() function or other hard to reproduce failures."(Lothar Wassmann) Signed-off-by: NMing Lei <tom.leiming@gmail.com> Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br> Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
- 19 10月, 2007 1 次提交
-
-
由 Ralf Baechle 提交于
MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x170be8): Section mismatch: reference to .init.data:au1100fb_fix (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170dc4): Section mismatch: reference to .init.data:au1100fb_var (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170dd0): Section mismatch: reference to .init.data:au1100fb_fix (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170de0): Section mismatch: reference to .init.data:au1100fb_var (between 'au1100fb_drv_probe' and 'read_null') WARNING: vmlinux.o(.text+0x170e70): Section mismatch: reference to .init.data:au1100fb_var (between 'au1100fb_drv_probe' and 'read_null') Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 23 8月, 2007 1 次提交
-
-
由 Yoichi Yuasa 提交于
au1100fb_fb_blank() should come before au1100fb_setmode(). drivers/video/au1100fb.c: In function 'au1100fb_setmode': drivers/video/au1100fb.c:211: error: implicit declaration of function 'au1100fb_fb_blank' Signed-off-by: NYoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 2月, 2007 1 次提交
-
-
由 Jiri Slaby 提交于
Use kzalloc instead of kmalloc + memset(0). Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: James Simmons <jsimmons@infradead.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 03 10月, 2006 1 次提交
-
-
由 Rodolfo Giometti 提交于
- add cursor enable/disable, very useful if you wish a full screen boot logo. Cursor can be disabled from kernel command line: video=au1100fb:nocursor,panel:Toppoly_TD035STED4 or from sysfs interface: echo 1 > /sys/module/au1100fb/parameters/nocursor - fix up some wrong indentation issues. Signed-off-by: NRodolfo Giometti <giometti@linux.it> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 06 8月, 2006 2 次提交
-
-
由 Rodolfo Giometti 提交于
- fix up the start up sequence. This new sequence allow you to correctly enable the LCD controller even if the bootloader has already did it. - fix up a wrong indentation issue. Signed-off-by: NRodolfo Giometti <giometti@linux.it> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Rodolfo Giometti 提交于
Fix "info->var.rotate" data settings. This info should be deduced directly from "fbdev->panel->control_base" defined into au1100fb.h. Signed-off-by: NRodolfo Giometti <giometti@linux.it> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 7月, 2006 1 次提交
-
-
由 Jörn Engel 提交于
Signed-off-by: NJörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: NAdrian Bunk <bunk@stusta.de>
-
- 28 6月, 2006 1 次提交
-
-
由 Jesper Juhl 提交于
Remove redundant NULL chck before kfree + tiny CodingStyle cleanup for drivers/ Signed-off-by: NJesper Juhl <jesper.juhl@gmail.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 27 6月, 2006 1 次提交
-
-
由 Rodolfo Giometti 提交于
Add power management support [akpm@osdl.org: cleanup] Signed-off-by: NRodolfo Giometti <giometti@linux.it> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 01 6月, 2006 1 次提交
-
-
由 Rodolfo Giometti 提交于
From: Rodolfo Giometti <giometti@linux.it> Fix the following warning on compilation: drivers/video/au1100fb.c: In function `au1100fb_fb_setcolreg': drivers/video/au1100fb.c:219: warning: ISO C90 forbids mixed declarations and code drivers/video/au1100fb.c: In function `au1100fb_fb_pan_display': drivers/video/au1100fb.c:321: warning: ISO C90 forbids mixed declarations and code drivers/video/au1100fb.c: In function `au1100fb_fb_mmap': drivers/video/au1100fb.c:387: warning: ISO C90 forbids mixed declarations and code drivers/video/au1100fb.c: In function `au1100fb_drv_probe': drivers/video/au1100fb.c:471: warning: unsigned int format, long unsigned int arg (arg 2) drivers/video/au1100fb.c: At top level: drivers/video/au1100fb.c:617: warning: initialization from incompatible pointer type drivers/video/au1100fb.c:618: warning: initialization from incompatible pointer type Signed-off-by: NRodolfo Giometti <giometti@linux.it> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 25 2月, 2006 1 次提交
-
-
由 Freddy Spierenburg 提交于
Replaced the no longer existing io_remap_page_range() routine with the io_remap_pfn_range() routine. Did not have a chance yet to test the functionality of the driver, but at least the kernel compiles cleanly again. Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 15 1月, 2006 1 次提交
-
-
由 Christoph Hellwig 提交于
No need for a file argument. If we'd really need it it's in vma->vm_file already. gbefb and sgivwfb used to set vma->vm_file to the file argument, but the kernel alrady did that. Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAntonino Daplas <adaplas@pol.net> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 30 10月, 2005 1 次提交
-
-
由 Pete Popov 提交于
Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Acked-by: NAntonino Daplas <adaplas@pol.net>
-
- 26 6月, 2005 1 次提交
-
-
由 randy_dunlap 提交于
au1100: use C99 struct init. Signed-off-by: Nrandy_dunlap <rdunlap@xenotime.net> Acked-by: NRussell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
- 17 4月, 2005 1 次提交
-
-
由 Linus Torvalds 提交于
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
-