Intel Processor Trace virtualization can be work in one
of 2 possible modes:

a. System-Wide mode (default):
   When the host configures Intel PT to collect trace packets
   of the entire system, it can leave the relevant VMX controls
   clear to allow VMX-specific packets to provide information
   across VMX transitions.
   KVM guest will not aware this feature in this mode and both
   host and KVM guest trace will output to host buffer.

b. Host-Guest mode:
   Host can configure trace-packet generation while in
   VMX non-root operation for guests and root operation
   for native executing normally.
   Intel PT will be exposed to KVM guest in this mode, and
   the trace output to respective buffer of host and guest.
   In this mode, tht status of PT will be saved and disabled
   before VM-entry and restored after VM-exit if trace
   a virtual machine.
Signed-off-by: NChao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: NLuwei Kang <luwei.kang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Add bit definitions for Intel PT MSRs to support trace output
directed to the memeory subsystem and holds a count if packet
bytes that have been sent out.

These are required by the upcoming PT support in KVM guests
for MSRs read/write emulation.
Signed-off-by: NLuwei Kang <luwei.kang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The Intel Processor Trace (PT) MSR bit defines are in a private
header. The upcoming support for PT virtualization requires these defines
to be accessible from KVM code.

Move them to the global MSR header file.
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NChao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: NLuwei Kang <luwei.kang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

Some guests OSes (including Windows 10) write to MSR 0xc001102c
on some cases (possibly while trying to apply a CPU errata).
Make KVM ignore reads and writes to that MSR, so the guest won't
crash.

The MSR is documented as "Execution Unit Configuration (EX_CFG)",
at AMD's "BIOS and Kernel Developer's Guide (BKDG) for AMD Family
15h Models 00h-0Fh Processors".

Cc: stable@vger.kernel.org
Signed-off-by: NEduardo Habkost <ehabkost@redhat.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

To avoid the overhead of STIBP always on, it's necessary to allow per task
control of STIBP.

Add a new task flag TIF_SPEC_IB and evaluate it during context switch if
SMT is active and flag evaluation is enabled by the speculation control
code. Add the conditional evaluation to x86_virt_spec_ctrl() as well so the
guest/host switch works properly.

This has no effect because TIF_SPEC_IB cannot be set yet and the static key
which controls evaluation is off. Preparatory patch for adding the control
code.

[ tglx: Simplify the context switch logic and make the TIF evaluation
  	depend on SMP=y and on the static key controlling the conditional
  	update. Rename it to TIF_SPEC_IB because it controls both STIBP and
  	IBPB ]
Signed-off-by: NTim Chen <tim.c.chen@linux.intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Casey Schaufler <casey.schaufler@intel.com>
Cc: Asit Mallick <asit.k.mallick@intel.com>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jon Masters <jcm@redhat.com>
Cc: Waiman Long <longman9394@gmail.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Dave Stewart <david.c.stewart@intel.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20181125185005.176917199@linutronix.de

Implements counter freezing for Arch Perfmon v4 (Skylake and
newer). This allows to speed up the PMI handler by avoiding
unnecessary MSR writes and make it more accurate.

The Arch Perfmon v4 PMI handler is substantially different than
the older PMI handler.

Differences to the old handler:

- It relies on counter freezing, which eliminates several MSR
  writes from the PMI handler and lowers the overhead significantly.

  It makes the PMI handler more accurate, as all counters get
  frozen atomically as soon as any counter overflows. So there is
  much less counting of the PMI handler itself.

  With the freezing we don't need to disable or enable counters or
  PEBS. Only BTS which does not support auto-freezing still needs to
  be explicitly managed.

- The PMU acking is done at the end, not the beginning.
  This makes it possible to avoid manual enabling/disabling
  of the PMU, instead we just rely on the freezing/acking.

- The APIC is acked before reenabling the PMU, which avoids
  problems with LBRs occasionally not getting unfreezed on Skylake.

- Looping is only needed to workaround a corner case which several PMIs
  are very close to each other. For common cases, the counters are freezed
  during PMI handler. It doesn't need to do re-check.

This patch:

- Adds code to enable v4 counter freezing
- Fork <=v3 and >=v4 PMI handlers into separate functions.
- Add kernel parameter to disable counter freezing. It took some time to
  debug counter freezing, so in case there are new problems we added an
  option to turn it off. Would not expect this to be used until there
  are new bugs.
- Only for big core. The patch for small core will be posted later
  separately.

Performance:

When profiling a kernel build on Kabylake with different perf options,
measuring the length of all NMI handlers using the nmi handler
trace point:

V3 is without counter freezing.
V4 is with counter freezing.
The value is the average cost of the PMI handler.
(lower is better)

perf options    `           V3(ns) V4(ns)  delta
-c 100000                   1088   894     -18%
-g -c 100000                1862   1646    -12%
--call-graph lbr -c 100000  3649   3367    -8%
--c.g. dwarf -c 100000      2248   1982    -12%
Signed-off-by: NAndi Kleen <ak@linux.intel.com>
Signed-off-by: NKan Liang <kan.liang@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Link: http://lkml.kernel.org/r/1533712328-2834-2-git-send-email-kan.liang@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Bit 3 of ARCH_CAPABILITIES tells a hypervisor that L1D flush on vmentry is
not needed.  Add a new value to enum vmx_l1d_flush_state, which is used
either if there is no L1TF bug at all, or if bit 3 is set in ARCH_CAPABILITIES.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

336996-Speculative-Execution-Side-Channel-Mitigations.pdf defines a new MSR
(IA32_FLUSH_CMD aka 0x10B) which has similar write-only semantics to other
MSRs defined in the document.

The semantics of this MSR is to allow "finer granularity invalidation of
caching structures than existing mechanisms like WBINVD. It will writeback
and invalidate the L1 data cache, including all cachelines brought in by
preceding instructions, without invalidating all caches (eg. L2 or
LLC). Some processors may also invalidate the first level level instruction
cache on a L1D_FLUSH command. The L1 data and instruction caches may be
shared across the logical processors of a core."

Use it instead of the loop based L1 flush algorithm.

A copy of this document is available at
   https://bugzilla.kernel.org/show_bug.cgi?id=199511

[ tglx: Avoid allocating pages when the MSR is available ]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

According to the Intel Software Developers' Manual, Vol. 4, Order No.
335592, these macros have been reversed since they were added in the
initial turbostat commit. The reversed definitions were presumably
copied from turbostat.c to this file.

Fixes: 9c63a650 ("tools/power/x86/turbostat: share kernel MSR #defines")
Signed-off-by: NMatt Turner <mattst88@gmail.com>
Acked-by: NIngo Molnar <mingo@kernel.org>
Signed-off-by: NLen Brown <len.brown@intel.com>

The "336996 Speculative Execution Side Channel Mitigations" from
May defines this as SSB_NO, hence lets sync-up.
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Some AMD processors only support a non-architectural means of enabling
speculative store bypass disable (SSBD).  To allow a simplified view of
this to a guest, an architectural definition has been created through a new
CPUID bit, 0x80000008_EBX[25], and a new MSR, 0xc001011f.  With this, a
hypervisor can virtualize the existence of this definition and provide an
architectural method for using SSBD to a guest.

Add the new CPUID feature, the new MSR and update the existing SSBD
support to use this MSR when present.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>

Intel collateral will reference the SSB mitigation bit in IA32_SPEC_CTL[2]
as SSBD (Speculative Store Bypass Disable).

Hence changing it.

It is unclear yet what the MSR_IA32_ARCH_CAPABILITIES (0x10a) Bit(4) name
is going to be. Following the rename it would be SSBD_NO but that rolls out
to Speculative Store Bypass Disable No.

Also fixed the missing space in X86_FEATURE_AMD_SSBD.

[ tglx: Fixup x86_amd_rds_enable() and rds_tif_to_amd_ls_cfg() as well ]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The Speculative Store Bypass vulnerability can be mitigated with the
Reduced Data Speculation (RDS) feature. To allow finer grained control of
this eventually expensive mitigation a per task mitigation control is
required.

Add a new TIF_RDS flag and put it into the group of TIF flags which are
evaluated for mismatch in switch_to(). If these bits differ in the previous
and the next task, then the slow path function __switch_to_xtra() is
invoked. Implement the TIF_RDS dependent mitigation control in the slow
path.

If the prctl for controlling Speculative Store Bypass is disabled or no
task uses the prctl then there is no overhead in the switch_to() fast
path.

Update the KVM related speculation control functions to take TID_RDS into
account as well.

Based on a patch from Tim Chen. Completely rewritten.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NIngo Molnar <mingo@kernel.org>
Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

Intel CPUs expose methods to:

 - Detect whether RDS capability is available via CPUID.7.0.EDX[31],

 - The SPEC_CTRL MSR(0x48), bit 2 set to enable RDS.

 - MSR_IA32_ARCH_CAPABILITIES, Bit(4) no need to enable RRS.

With that in mind if spec_store_bypass_disable=[auto,on] is selected set at
boot-time the SPEC_CTRL MSR to enable RDS if the platform requires it.

Note that this does not fix the KVM case where the SPEC_CTRL is exposed to
guests which can muck with it, see patch titled :
 KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS.

And for the firmware (IBRS to be set), see patch titled:
 x86/spectre_v2: Read SPEC_CTRL MSR during boot and re-use reserved bits

[ tglx: Distangled it from the intel implementation and kept the call order ]
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Reviewed-by: NIngo Molnar <mingo@kernel.org>

Add the EventSelect and Counter MSRs for AMD Core Perf Extension.
Signed-off-by: NJanakarajan Natarajan <Janakarajan.Natarajan@amd.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Add MSR and bit definitions for SPEC_CTRL, PRED_CMD and ARCH_CAPABILITIES.

See Intel's 336996-Speculative-Execution-Side-Channel-Mitigations.pdf
Signed-off-by: NDavid Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: ak@linux.intel.com
Cc: ashok.raj@intel.com
Cc: dave.hansen@intel.com
Cc: karahmed@amazon.de
Cc: arjan@linux.intel.com
Cc: torvalds@linux-foundation.org
Cc: peterz@infradead.org
Cc: bp@alien8.de
Cc: pbonzini@redhat.com
Cc: tim.c.chen@linux.intel.com
Cc: gregkh@linux-foundation.org
Link: https://lkml.kernel.org/r/1516896855-7642-5-git-send-email-dwmw@amazon.co.uk

With LFENCE now a serializing instruction, use LFENCE_RDTSC in preference
to MFENCE_RDTSC.  However, since the kernel could be running under a
hypervisor that does not support writing that MSR, read the MSR back and
verify that the bit has been set successfully.  If the MSR can be read
and the bit is set, then set the LFENCE_RDTSC feature, otherwise set the
MFENCE_RDTSC feature.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NReviewed-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/20180108220932.12580.52458.stgit@tlendack-t1.amdoffice.net

To aid in speculation control, make LFENCE a serializing instruction
since it has less overhead than MFENCE.  This is done by setting bit 1
of MSR 0xc0011029 (DE_CFG).  Some families that support LFENCE do not
have this MSR.  For these families, the LFENCE instruction is already
serializing.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NReviewed-by: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Paul Turner <pjt@google.com>
Link: https://lkml.kernel.org/r/20180108220921.12580.71694.stgit@tlendack-t1.amdoffice.net

Update the CPU features to include identifying and reporting on the
Secure Encrypted Virtualization (SEV) feature.  SEV is identified by
CPUID 0x8000001f, but requires BIOS support to enable it (set bit 23 of
MSR_K8_SYSCFG and set bit 0 of MSR_K7_HWCR).  Only show the SEV feature
as available if reported by CPUID and enabled by BIOS.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Radim Krčmář" <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: kvm@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>

Early in the boot process, add checks to determine if the kernel is
running with Secure Encrypted Virtualization (SEV) active.

Checking for SEV requires checking that the kernel is running under a
hypervisor (CPUID 0x00000001, bit 31), that the SEV feature is available
(CPUID 0x8000001f, bit 1) and then checking a non-interceptable SEV MSR
(0xc0010131, bit 0).

This check is required so that during early compressed kernel booting the
pagetables (both the boot pagetables and KASLR pagetables (if enabled) are
updated to include the encryption mask so that when the kernel is
decompressed into encrypted memory, it can boot properly.

After the kernel is decompressed and continues booting the same logic is
used to check if SEV is active and set a flag indicating so.  This allows
to distinguish between SME and SEV, each of which have unique differences
in how certain things are handled: e.g. DMA (always bounce buffered with
SEV) or EFI tables (always access decrypted with SME).
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NBrijesh Singh <brijesh.singh@amd.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Tested-by: NBorislav Petkov <bp@suse.de>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: kvm@vger.kernel.org
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Link: https://lkml.kernel.org/r/20171020143059.3291-13-brijesh.singh@amd.com

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Update the CPU features to include identifying and reporting on the
Secure Memory Encryption (SME) feature.  SME is identified by CPUID
0x8000001f, but requires BIOS support to enable it (set bit 23 of
MSR_K8_SYSCFG).  Only show the SME feature as available if reported by
CPUID, enabled by BIOS and not configured as CONFIG_X86_32=y.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Larry Woodman <lwoodman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Toshimitsu Kani <toshi.kani@hpe.com>
Cc: kasan-dev@googlegroups.com
Cc: kvm@vger.kernel.org
Cc: linux-arch@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Cc: linux-efi@vger.kernel.org
Cc: linux-mm@kvack.org
Link: http://lkml.kernel.org/r/85c17ff450721abccddc95e611ae8df3f4d9718b.1500319216.git.thomas.lendacky@amd.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

Bits 11:2 must be zero and the linear addess in bits 63:12 must be
canonical. Otherwise, WRMSR(BNDCFGS) should raise #GP.

Fixes: 0dd376e7 ("KVM: x86: add MSR_IA32_BNDCFGS to msrs_to_save")
Signed-off-by: NJim Mattson <jmattson@google.com>
Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com>

Currently, the SMIs are visible to all performance counters, because
many users want to measure everything including SMIs. But in some
cases, the SMI cycles should not be counted - for example, to calculate
the cost of an SMI itself. So a knob is needed.

When setting FREEZE_WHILE_SMM bit in IA32_DEBUGCTL, all performance
counters will be effected. There is no way to do per-counter freeze
on SMI. So it should not use the per-event interface (e.g. ioctl or
event attribute) to set FREEZE_WHILE_SMM bit.

Adds sysfs entry /sys/device/cpu/freeze_on_smi to set FREEZE_WHILE_SMM
bit in IA32_DEBUGCTL. When set, freezes perfmon and trace messages
while in SMM.

Value has to be 0 or 1. It will be applied to all processors.

Also serialize the entire setting so we don't get multiple concurrent
threads trying to update to different values.
Signed-off-by: NKan Liang <Kan.liang@intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: acme@kernel.org
Cc: bp@alien8.de
Cc: jolsa@kernel.org
Link: http://lkml.kernel.org/r/1494600673-244667-1-git-send-email-kan.liang@intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

x = 1
ulong_long = x << 32;

results in:

warning: left shift count >= width of type

x = 8
ulong_long = x << 24;

results in a sign extended ulong_long

Cast x to unsigned long long in these macros
to prevent these errors.
Signed-off-by: NLen Brown <len.brown@intel.com>

The Hardware Performance State request MSR has a field
to express the "Energy Performance Preference" (HWP.EPP).

Decode that field so the definition may be shared by
by the intel_pstate driver and any utilities that
decode the same register.
Signed-off-by: NLen Brown <len.brown@intel.com>

Intel supports faulting on the CPUID instruction beginning with Ivy Bridge.
When enabled, the processor will fault on attempts to execute the CPUID
instruction with CPL>0. Exposing this feature to userspace will allow a
ptracer to trap and emulate the CPUID instruction.

When supported, this feature is controlled by toggling bit 0 of
MSR_MISC_FEATURES_ENABLES. It is documented in detail in Section 2.3.2 of
https://bugzilla.kernel.org/attachment.cgi?id=243991

Implement a new pair of arch_prctls, available on both x86-32 and x86-64.

ARCH_GET_CPUID: Returns the current CPUID state, either 0 if CPUID faulting
    is enabled (and thus the CPUID instruction is not available) or 1 if
    CPUID faulting is not enabled.

ARCH_SET_CPUID: Set the CPUID state to the second argument. If
    cpuid_enabled is 0 CPUID faulting will be activated, otherwise it will
    be deactivated. Returns ENODEV if CPUID faulting is not supported on
    this system.

The state of the CPUID faulting flag is propagated across forks, but reset
upon exec.
Signed-off-by: NKyle Huey <khuey@kylehuey.com>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Robert O'Callahan <robert@ocallahan.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack <dmatlack@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/20170320081628.18952-9-khuey@kylehuey.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Intel supports faulting on the CPUID instruction beginning with Ivy Bridge.
When enabled, the processor will fault on attempts to execute the CPUID
instruction with CPL>0. This will allow a ptracer to emulate the CPUID
instruction.

Bit 31 of MSR_PLATFORM_INFO advertises support for this feature. It is
documented in detail in Section 2.3.2 of
https://bugzilla.kernel.org/attachment.cgi?id=243991

Detect support for this feature and expose it as X86_FEATURE_CPUID_FAULT.
Signed-off-by: NKyle Huey <khuey@kylehuey.com>
Reviewed-by: NBorislav Petkov <bp@suse.de>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Robert O'Callahan <robert@ocallahan.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack <dmatlack@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/20170320081628.18952-8-khuey@kylehuey.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This matches the only public Intel documentation of this MSR, in the
"Virtualization Technology FlexMigration Application Note"
(preserved at https://bugzilla.kernel.org/attachment.cgi?id=243991)
Signed-off-by: NKyle Huey <khuey@kylehuey.com>
Cc: Grzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: kvm@vger.kernel.org
Cc: Radim Krčmář <rkrcmar@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: linux-kselftest@vger.kernel.org
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Robert O'Callahan <robert@ocallahan.org>
Cc: Richard Weinberger <richard@nod.at>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Len Brown <len.brown@intel.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: user-mode-linux-devel@lists.sourceforge.net
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: user-mode-linux-user@lists.sourceforge.net
Cc: David Matlack <dmatlack@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dmitry Safonov <dsafonov@virtuozzo.com>
Cc: linux-fsdevel@vger.kernel.org
Cc: Paolo Bonzini <pbonzini@redhat.com>
Link: http://lkml.kernel.org/r/20170320081628.18952-2-khuey@kylehuey.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

The debug control MSR is "highly magical" as the blockstep bit can be
cleared by hardware under not well documented circumstances.

So a task switch relying on the bit set by the previous task (according to
the previous tasks thread flags) can trip over this and not update the flag
for the next task.

To fix this its required to handle DEBUGCTLMSR_BTF when either the previous
or the next or both tasks have the TIF_BLOCKSTEP flag set.

While at it avoid branching within the TIF_BLOCKSTEP case and evaluating
boot_cpu_data twice in kernels without CONFIG_X86_DEBUGCTLMSR.

x86_64: arch/x86/kernel/process.o
text	data	bss	dec	 hex
3024    8577    16      11617    2d61	Before
3008	8577	16	11601	 2d51	After

i386: No change

[ tglx: Made the shift value explicit, use a local variable to make the
code readable and massaged changelog]
Originally-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NKyle Huey <khuey@kylehuey.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andy Lutomirski <luto@kernel.org>
Link: http://lkml.kernel.org/r/20170214081104.9244-3-khuey@kylehuey.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

This non-architectural MSR has disable bits
for various prefetchers on modern processors.

While these bits are generally touched only by the BIOS,
say, via BIOS SETUP, it is useful to dump them
when examining options that can alter performance.

Cc: x86@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

These MSRs are currently used by the intel_pstate driver,
using a local definition.

Cc: x86@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

The Baytrail SOC, with its Silvermont core, has some unique properties:

1. a hardware CC1 residency counter
2. a module-c6 residency counter
3. a package-c6 counter at traditional package-c7 counter address.

The SOC does not support c3, pc3, c7 or pc7 counters.
Signed-off-by: NLen Brown <len.brown@intel.com>

The two users, intel_idle driver and turbostat utility
are using the new name, MSR_PKG_CST_CONFIG_CONTROL

Cc: x86@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

define MSR_PKG_CST_CONFIG_CONTROL (0xE2),
which is the string used by Intel Documentation.

We use this MSR in intel_idle and turbostat by a previous name,
to be updated in the next patch.

Cc: x86@kernel.org
Signed-off-by: NLen Brown <len.brown@intel.com>

These are currently open-coded into intel_pstate.c
Signed-off-by: NLen Brown <len.brown@intel.com>

Define new MSR MISC_FEATURE_ENABLES (0x140).

On supported CPUs if bit 1 of this MSR is set, then calling MONITOR and
MWAIT instructions outside of ring 0 will not cause invalid-opcode
exception.

The MSR MISC_FEATURE_ENABLES is not yet documented in the SDM. Here is the
relevant documentation:

Hex   Dec  Name                     Scope
140H  320  MISC_FEATURE_ENABLES     Thread
           0    Reserved
           1    If set to 1, the MONITOR and MWAIT instructions do not
                cause invalid-opcode exceptions when executed with CPL > 0
                or in virtual-8086 mode. If MWAIT is executed when CPL > 0
                or in virtual-8086 mode, and if EAX indicates a C-state
                other than C0 or C1, the instruction operates as if EAX
                indicated the C-state C1.
           63:2 Reserved
Signed-off-by: NGrzegorz Andrejczuk <grzegorz.andrejczuk@intel.com>
Cc: Piotr.Luc@intel.com
Cc: dave.hansen@linux.intel.com
Link: http://lkml.kernel.org/r/1484918557-15481-2-git-send-email-grzegorz.andrejczuk@intel.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Intel Xeons from Ivy Bridge onwards support a processor identification
number set in the factory. To the user this is a handy unique number to
identify a particular CPU. Intel can decode this to the fab/production
run to track errors. On systems that have it, include it in the machine
check record. I'm told that this would be helpful for users that run
large data centers with multi-socket servers to keep track of which CPUs
are seeing errors.

Boris:
* Add some clarifying comments and spacing.
* Mask out [63:2] in the disabled-but-not-locked case
* Call the MSR variable "val" for more readability.
Signed-off-by: NTony Luck <tony.luck@intel.com>
Cc: Ashok Raj <ashok.raj@intel.com>
Cc: linux-edac <linux-edac@vger.kernel.org>
Cc: x86-ml <x86@kernel.org>
Link: http://lkml.kernel.org/r/20161123114855.njguoaygp3qnbkia@pd.tnicSigned-off-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

The MSR_IA32_RTIT_STATUS is defined twice, so remove one.
Signed-off-by: NLongpeng(Mike) <longpeng2@huawei.com>
Acked-by: NBorislav Petkov <bp@suse.de>
Cc: len.brown@intel.com
Cc: peterz@infradead.org
Cc: rafael.j.wysocki@intel.com
Cc: alexander.shishkin@linux.intel.com
Cc: ray.huang@amd.com
Cc: Aravind.Gopalakrishnan@amd.com
Cc: wu.wubin@huawei.com
Cc: srinivas.pandruvada@linux.intel.com
Cc: zhaoshenglong@huawei.com
Cc: vladimir_zapolskiy@mentor.com
Link: http://lkml.kernel.org/r/1476405740-80816-1-git-send-email-longpeng2@huawei.comSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

Remove MSR_NHM_TURBO_RATIO_LIMIT and MSR_IVT_TURBO_RATIO_LIMIT as
they are duplicate.
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>