Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DCE6 requires a non-0 value for lpAuxRequest for the
ProcessAuxChannelTransaction command table.  Setting
lpAuxRequest to 0 is a special case used by AsicInit
for setting up the aux pads.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Rename the function to better match the functionality.
DCPLL became PLL0 on DCE6.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Each pair of crtcs (0/1, 2/3, 4/5) can be power gated.
Make sure the power is applied when the crtc is in use and
only power down the pair when both are off.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The hw no longer has the bits and the table is removed.
Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Signed-off-by: NAlex Deucher <alexdeucher@gmail.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The maximum number of pipes is needed by the user space compute
driver to calculate the number of wavefronts per thread group.
Signed-off-by: NTom Stellard <thomas.stellard@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Broken monitors and/or broken graphic boards may send erroneous or no
EDID data. This also applies to broken KVM devices that are unable to
correctly forward the EDID data of the connected monitor but invent
their own fantasy data.

This patch allows to specify an EDID data set to be used instead of
probing the monitor for it. It contains built-in data sets of frequently
used screen resolutions. In addition, a particular EDID data set may be
provided in the /lib/firmware directory and loaded via the firmware
interface. The name is passed to the kernel as module parameter of the
drm_kms_helper module either when loaded
  options drm_kms_helper edid_firmware=edid/1280x1024.bin
or as kernel commandline parameter
  drm_kms_helper.edid_firmware=edid/1280x1024.bin

It is also possible to restrict the usage of a specified EDID data set
to a particular connector. This is done by prepending the name of the
connector to the name of the EDID data set using the syntax
  edid_firmware=[<connector>:]<edid>
such as, for example,
  edid_firmware=DVI-I-1:edid/1920x1080.bin
in which case no other connector will be affected.

The built-in data sets are
Resolution    Name
--------------------------------
1024x768      edid/1024x768.bin
1280x1024     edid/1280x1024.bin
1680x1050     edid/1680x1050.bin
1920x1080     edid/1920x1080.bin

They are ignored, if a file with the same name is available in the
/lib/firmware directory.

The built-in EDID data sets are based on standard timings that may not
apply to a particular monitor and even crash it. Ideally, EDID data of
the connected monitor should be used. They may be obtained through the
drm/cardX/cardX-<connector>/edid entry in the /sys/devices PCI directory
of a correctly working graphics adapter.

It is even possible to specify the name of an EDID data set on-the-fly
via the /sys/module interface, e.g.
echo edid/myedid.bin >/sys/module/drm_kms_helper/parameters/edid_firmware
The new screen mode is considered when the related kernel function is
called for the first time after the change. Such calls are made when the
X server is started or when the display settings dialog is opened in an
already running X server.
Signed-off-by: NCarsten Emde <C.Emde@osadl.org>
Signed-off-by: NDave Airlie <airlied@redhat.com>

This patch adds hdmi audio feature for exynos drm.
With this patch, i2s channel feeds audio data in hdmi when hdmi is connected.
Signed-off-by: NSeung-Woo Kim <sw0312.kim@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

DRM checks whether the plane supports a pixel format of fb when plane is
updated. This adds a default pixel format supporting format exynos drm
plane.
Signed-off-by: NEunchul Kim <chulspro.kim@samsung.com>
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The some contents of the exynos_hdmi.h are used only in exynos_hdmi.c,
so move them to exynos_hdmi.c.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The is_local member indicates unused subdrv such connector and encoder
so doesn't make resources for them.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Some subdrv need open and close functions call when open and close drm.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The exynos drm driver has several subdrv. They each can be module but it
causes unfixed probe order of exynodr drm driver and each subdrv. It
also needs some weird codes such as exynos_drm_fbdev_reinit and
exynos_drm_mode_group_reinit. This patch can remove weird codes and
clear codes through we doesn't modularity each subdrv.

Also this removes unnecessary codes related module.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

We should release pending pageflip events when closed. If not, they will
be dangling events.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

this function would be used for drm based 2d acceleration driver
to get/put dma address through gem handle.
when exynos_drm_get_dma_address is called reference count of
gem object would be increased not to be released by gem close and
when exynos_drm_put_dma_address is called the reference count of
this gem object would be decreased to be released.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

with this patch, we can allocate physically continuous or non-continuous
memory and also it creates scatterlist for iommu support so allocated
memory region can be mapped to iommu page table using scatterlist.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

this patch adds mode_fixup feature for hdmi module that
specific driver changes current mode to driver desired mode
properly.
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Later Exynos series from Exynos4X12 support HDMI version 1.4. We will
distinguish to use which version via platform data. This patch supports
only default features of HDMI version 1.4(The 3D, sound and etc don't
support yet)
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NInki Dae <inki.dae@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The contents of exynos_mixer.h are used only in exynos_mixer.c, so
separated header is unnecessary.
Signed-off-by: NJoonyoung Shim <jy0922.shim@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

It cannot map correctly if page fault begins from a intermediate address.

[The driver prefaults the mapping, so we need to work from the correct
 base address not the faulting address otherwise the map appears offset by
 the fault offset]
Signed-off-by: NYoichi Yuasa <yuasa@linux-mips.org>
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Cc: stable@kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Merge tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

* tag 'drm-intel-next-2012-03-01' of git://people.freedesktop.org/~danvet/drm-intel:
  drm/i915: Only clear the GPU domains upon a successful finish
  drm/i915: reenable gmbus on gen3+ again
  drm/i915: i2c: unconditionally set up gpio fallback
  drm/i915: merge gmbus and gpio i2c adpater into one
  drm/i915: merge struct intel_gpio into struct intel_gmbus
  i2c: export bit-banging algo functions
  drm/nouveau: do a better job at hiding the NIH i2c bit-banging algo
  drm/i915: add dev_priv to intel_gmbus
  drm/i915: Fix single msg gmbus_xfers writes
  drm/i915: error_buffer->ring should be signed
  drm/i915: Silence the error message from i915_wait_request()
  drm/i915: use the new hdmi_force_audio enum more
  drm/i915: No need to search again after retiring requests
  drm/i915: Only bump refcnt on objects scheduled for eviction
  drm/i915/bios: Downgrade the "signature missing" DRM_ERROR to debug
  drm/i915: Ignore LVDS on hp t5745 and hp st5747 thin client
  drm/i915: Fixes distorted external screen image on HP 2730p

Only radeon_gem_object_unpin was used anymore, in only one place.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The hardware only takes 27 bits for the offset, so larger offsets are
truncated, and the display shows random bits other than the intended ones.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The hardware only takes 27 bits for the offset, so larger offsets are
truncated, and the hardware cursor shows random bits other than the intended
ones.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=46796

Cc: stable@vger.kernel.org
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

On a system with one HDMI and one VGA connector the latter
causes output polling to run every ten seconds. This causes
full EDID re-fetch on every poll and approx. 100ms rendering
stalls are experienced by full screen page-flipping applications.
Optimisation is to trust HPD sense on R600+ ASICs and to skip
doing these expensive probes unless HPD sense has changed.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=47007

agd5f: fix patch and message formatting.
Signed-off-by: NTvrtko Ursulin <tvrtko.ursulin@onelan.co.uk>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

vbios lists DVI-I port as VGA and DVI-D.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=47007Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

We digital encoders have a detect function as well (for
DP to VGA bridges), so we make sure we choose the analog
one here.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=47007Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: NDave Airlie <airlied@redhat.com>

Use the more current logging style.

Add pr_fmt and remove the TTM_PFX uses.
Coalesce formats and align arguments.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>

Most of the error handling code in this function frees the buffers
kcmd_addr, kvb_addr, and kbox_addr allocated at the beginning of this
function.  These two branches are changed to do the same.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: NDave Airlie <airlied@redhat.com>

The function radeon_cs_parser_init is only called from two places, in
drivers/gpu/drm/radeon/radeon_cs.c and drivers/gpu/drm/radeon/r600_cs.c.
In each case, if the call fails another function is called that frees all
of the kdata and dpage information in the chunks array.  So this
information should not be freed in radeon_cs_parser_init as well.
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: NJerome Glisse <jglisse@redhat.com>
Signed-off-by: NDave Airlie <airlied@redhat.com>