The Netware Core Protocol is a file system that talks to
Netware clients over IPX. Since IPX has been dead for many years
move the file system into staging for eventual interment.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: NPhilippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Logfs was introduced to the kernel in 2009, and hasn't seen any non
drive-by changes since 2012, while having lots of unsolved issues
including the complete lack of error handling, with more and more
issues popping up without any fixes.

The logfs.org domain has been bouncing from a mail, and the maintainer
on the non-logfs.org domain hasn't repsonded to past queries either.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Add infrastructure for multipage buffered writes.  This is implemented
using an main iterator that applies an actor function to a range that
can be written.

This infrastucture is used to implement a buffered write helper, one
to zero file ranges and one to implement the ->page_mkwrite VM
operations.  All of them borrow a fair amount of code from fs/buffers.
for now by using an internal version of __block_write_begin that
gets passed an iomap and builds the corresponding buffer head.

The file system is gets a set of paired ->iomap_begin and ->iomap_end
calls which allow it to map/reserve a range and get a notification
once the write code is finished with it.

Based on earlier code from Dave Chinner.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NBob Peterson <rpeterso@redhat.com>
Signed-off-by: NDave Chinner <david@fromorbit.com>

This patch adds the renamed functions moved from the f2fs crypto files.

1. definitions for per-file encryption used by ext4 and f2fs.

2. crypto.c for encrypt/decrypt functions
 a. IO preparation:
  - fscrypt_get_ctx / fscrypt_release_ctx
 b. before IOs:
  - fscrypt_encrypt_page
  - fscrypt_decrypt_page
  - fscrypt_zeroout_range
 c. after IOs:
  - fscrypt_decrypt_bio_pages
  - fscrypt_pullback_bio_page
  - fscrypt_restore_control_page

3. policy.c supporting context management.
 a. For ioctls:
  - fscrypt_process_policy
  - fscrypt_get_policy
 b. For context permission
  - fscrypt_has_permitted_context
  - fscrypt_inherit_context

4. keyinfo.c to handle permissions
  - fscrypt_get_encryption_info
  - fscrypt_free_encryption_info

5. fname.c to support filename encryption
 a. general wrapper functions
  - fscrypt_fname_disk_to_usr
  - fscrypt_fname_usr_to_disk
  - fscrypt_setup_filename
  - fscrypt_free_filename

 b. specific filename handling functions
  - fscrypt_fname_alloc_buffer
  - fscrypt_fname_free_buffer

6. Makefile and Kconfig

Cc: Al Viro <viro@ftp.linux.org.uk>
Signed-off-by: NMichael Halcrow <mhalcrow@google.com>
Signed-off-by: NIldar Muslukhov <ildarm@google.com>
Signed-off-by: NUday Savagaonkar <savagaon@google.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>

Since old mbcache code is gone, let's rename new code to mbcache since
number 2 is now meaningless. This is just a mechanical replacement.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Both ext2 and ext4 are now converted to mbcache2. Remove the old mbcache
code.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Original mbcache was designed to have more features than what ext?
filesystems ended up using. It supported entry being in more hashes, it
had a home-grown rwlocking of each entry, and one cache could cache
entries from multiple filesystems. This genericity also resulted in more
complex locking, larger cache entries, and generally more code
complexity.

This is reimplementation of the mbcache functionality to exactly fit the
purpose ext? filesystems use it for. Cache entries are now considerably
smaller (7 instead of 13 longs), the code is considerably smaller as
well (414 vs 913 lines of code), and IMO also simpler. The new code is
also much more lightweight.

I have measured the speed using artificial xattr-bench benchmark, which
spawns P processes, each process sets xattr for F different files, and
the value of xattr is randomly chosen from a pool of V values. Averages
of runtimes for 5 runs for various combinations of parameters are below.
The first value in each cell is old mbache, the second value is the new
mbcache.

V=10
F\P	1		2		4		8		16		32		64
10	0.158,0.157	0.208,0.196	0.500,0.277	0.798,0.400	3.258,0.584	13.807,1.047	61.339,2.803
100	0.172,0.167	0.279,0.222	0.520,0.275	0.825,0.341	2.981,0.505	12.022,1.202	44.641,2.943
1000	0.185,0.174	0.297,0.239	0.445,0.283	0.767,0.340	2.329,0.480	6.342,1.198	16.440,3.888

V=100
F\P	1		2		4		8		16		32		64
10	0.162,0.153	0.200,0.186	0.362,0.257	0.671,0.496	1.433,0.943	3.801,1.345	7.938,2.501
100	0.153,0.160	0.221,0.199	0.404,0.264	0.945,0.379	1.556,0.485	3.761,1.156	7.901,2.484
1000	0.215,0.191	0.303,0.246	0.471,0.288	0.960,0.347	1.647,0.479	3.916,1.176	8.058,3.160

V=1000
F\P	1		2		4		8		16		32		64
10	0.151,0.129	0.210,0.163	0.326,0.245	0.685,0.521	1.284,0.859	3.087,2.251	6.451,4.801
100	0.154,0.153	0.211,0.191	0.276,0.282	0.687,0.506	1.202,0.877	3.259,1.954	8.738,2.887
1000	0.145,0.179	0.202,0.222	0.449,0.319	0.899,0.333	1.577,0.524	4.221,1.240	9.782,3.579

V=10000
F\P	1		2		4		8		16		32		64
10	0.161,0.154	0.198,0.190	0.296,0.256	0.662,0.480	1.192,0.818	2.989,2.200	6.362,4.746
100	0.176,0.174	0.236,0.203	0.326,0.255	0.696,0.511	1.183,0.855	4.205,3.444	19.510,17.760
1000	0.199,0.183	0.240,0.227	1.159,1.014	2.286,2.154	6.023,6.039	---,10.933	---,36.620

V=100000
F\P	1		2		4		8		16		32		64
10	0.171,0.162	0.204,0.198	0.285,0.230	0.692,0.500	1.225,0.881	2.990,2.243	6.379,4.771
100	0.151,0.171	0.220,0.210	0.295,0.255	0.720,0.518	1.226,0.844	3.423,2.831	19.234,17.544
1000	0.192,0.189	0.249,0.225	1.162,1.043	2.257,2.093	5.853,4.997	---,10.399	---,32.198

We see that the new code is faster in pretty much all the cases and
starting from 4 processes there are significant gains with the new code
resulting in upto 20-times shorter runtimes. Also for large numbers of
cached entries all values for the old code could not be measured as the
kernel started hitting softlockups and died before the test completed.
Signed-off-by: NJan Kara <jack@suse.cz>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Prevent clean ext3 filesystems from mounting by default with the ext2
driver (with no journal!) by putting ext4 ahead of ext2 in the default
probe order.  This will have the effect of mounting ext2 filesystems
with ext4.ko by default, which is a safer failure than hoping the user
notices that their journalled ext3 is now running without a journal!

Users who require ext2.ko for ext2 can either disable ext4.ko or
explicitly request ext2 via "mount -t ext2" or "rootfstype=ext2".
Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: NTheodore Ts'o <tytso@mit.edu>

Signed-off-by: NMike Marshall <hubcap@omnibond.com>

This allows to select the userfaultfd during configuration to build it.
Signed-off-by: NAndrea Arcangeli <aarcange@redhat.com>
Acked-by: NPavel Emelyanov <xemul@parallels.com>
Cc: Sanidhya Kashyap <sanidhya.gatech@gmail.com>
Cc: zhang.zhanghailiang@huawei.com
Cc: "Kirill A. Shutemov" <kirill@shutemov.name>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Hugh Dickins <hughd@google.com>
Cc: Peter Feiner <pfeiner@google.com>
Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Huangpeng (Peter)" <peter.huangpeng@huawei.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The functionality of ext3 is fully supported by ext4 driver. Major
distributions (SUSE, RedHat) already use ext4 driver to handle ext3
filesystems for quite some time. There is some ugliness in mm resulting
from jbd cleaning buffers in a dirty page without cleaning page dirty
bit and also support for buffer bouncing in the block layer when stable
pages are required is there only because of jbd. So let's remove the
ext3 driver. This saves us some 28k lines of duplicated code.
Acked-by: NTheodore Ts'o <tytso@mit.edu>
Signed-off-by: NJan Kara <jack@suse.cz>

hppfs (honeypot procfs) was an attempt to use UML as honeypot.
It was never stable nor in heavy use.

As Al Viro and Christoph Hellwig pointed some major issues out
it is better to let it die.
Signed-off-by: NRichard Weinberger <richard@nod.at>

The parisc arch has been the only user of HP-UX SOM binaries.

Support for HP-UX executables was never finished and since we now drop support
for the HP-UX compat layer anyway, it does not makes sense to keep the
BINFMT_SOM support.

Cc: linux-fsdevel@vger.kernel.org
Cc: linux-parisc@vger.kernel.org
Signed-off-by: NHelge Deller <deller@gmx.de>

The fewer Kconfig options we have the better.  Use the generic
CONFIG_FS_DAX to enable XIP support in ext2 as well as in the core.
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Use the generic AIO infrastructure instead of custom read and write
methods.  In addition to giving us support for AIO, this adds the missing
locking between read() and truncate().
Signed-off-by: NMatthew Wilcox <matthew.r.wilcox@intel.com>
Reviewed-by: NRoss Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: NJan Kara <jack@suse.cz>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Cc: Boaz Harrosh <boaz@plexistor.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add a separate file system to handle the tracing directory. Currently it
is part of debugfs, but that is starting to show its limits.

One thing is that in order to access the tracing infrastructure, you need
to mount debugfs. As that includes debugging from all sorts of sub systems
in the kernel, it is not considered advisable to mount such an all
encompassing debugging system.

Having the tracing system in its own file systems gives access to the
tracing sub system without needing to include all other systems.

Another problem with tracing using the debugfs system is that the
instances use mkdir to create sub buffers. debugfs does not support mkdir
from userspace so to implement it, special hacks were used. By controlling
the file system that the tracing infrastructure uses, this can be properly
done without hacks.
Signed-off-by: NSteven Rostedt <rostedt@goodmis.org>

New pseudo-filesystem: nsfs.  Targets of /proc/*/ns/* live there now.
It's not mountable (not even registered, so it's not in /proc/filesystems,
etc.).  Files on it *are* bindable - we explicitly permit that in do_loopback().

This stuff lives in fs/nsfs.c now; proc_ns_fget() moved there as well.
get_proc_ns() is a macro now (it's simply returning ->i_private; would
have been an inline, if not for header ordering headache).
proc_ns_inode() is an ex-parrot.  The interface used in procfs is
ns_get_path(path, task, ops) and ns_get_name(buf, size, task, ops).

Dentries and inodes are never hashed; a non-counting reference to dentry
is stashed in ns_common (removed by ->d_prune()) and reused by ns_get_path()
if present.  See ns_get_path()/ns_prune_dentry/nsfs_evict() for details
of that mechanism.

As the result, proc_ns_follow_link() has stopped poking in nd->path.mnt;
it does nd_jump_link() on a consistent <vfsmount,dentry> pair it gets
from ns_get_path().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Some distributions carry an "old" format of overlayfs while mainline has a
"new" format.

The distros will possibly want to keep the old overlayfs alongside the new
for compatibility reasons.

To make it possible to differentiate the two versions change the name of
the new one from "overlayfs" to "overlay".
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
Reported-by: NSerge Hallyn <serge.hallyn@ubuntu.com>
Cc: Andy Whitcroft <apw@canonical.com>

Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree.  All modifications
go to the upper, writable layer.

This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.

The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems.  This
simplifies the implementation and allows native performance in these
cases.

The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS.  This uses slightly more memory than union mounts, but dentries
are relatively small.

Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.

Opening non directories results in the open forwarded to the
underlying filesystem.  This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).

Usage:

  mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay

The following cotributions have been folded into this patch:

Neil Brown <neilb@suse.de>:
 - minimal remount support
 - use correct seek function for directories
 - initialise is_real before use
 - rename ovl_fill_cache to ovl_dir_read

Felix Fietkau <nbd@openwrt.org>:
 - fix a deadlock in ovl_dir_read_merged
 - fix a deadlock in ovl_remove_whiteouts

Erez Zadok <ezk@fsl.cs.sunysb.edu>
 - fix cleanup after WARN_ON

Sedat Dilek <sedat.dilek@googlemail.com>
 - fix up permission to confirm to new API

Robin Dong <hao.bigrat@gmail.com>
 - fix possible leak in ovl_new_inode
 - create new inode in ovl_link

Andy Whitcroft <apw@canonical.com>
 - switch to __inode_permission()
 - copy up i_uid/i_gid from the underlying inode

AV:
 - ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
 - ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
   lack of check for udir being the parent of upper, dropping and regaining
   the lock on udir (which would require _another_ check for parent being
   right).
 - bogus d_drop() in copyup and rename [fix from your mail]
 - copyup/remove and copyup/rename races [fix from your mail]
 - ovl_dir_fsync() leaving ERR_PTR() in ->realfile
 - ovl_entry_free() is pointless - it's just a kfree_rcu()
 - fold ovl_do_lookup() into ovl_lookup()
 - manually assigning ->d_op is wrong.  Just use ->s_d_op.
 [patches picked from Miklos]:
 * copyup/remove and copyup/rename races
 * bogus d_drop() in copyup and rename

Also thanks to the following people for testing and reporting bugs:

  Jordi Pujol <jordipujolp@gmail.com>
  Andy Whitcroft <apw@canonical.com>
  Michal Suchanek <hramrach@centrum.cz>
  Felix Fietkau <nbd@openwrt.org>
  Erez Zadok <ezk@fsl.cs.sunysb.edu>
  Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>

Add a new field to fs_pin - kill(pin).  That's what umount and r/o remount
will be calling for all pins attached to vfsmount and superblock resp.
Called after bumping the refcount, so it won't go away under us.  Dropping
the refcount is responsibility of the instance.  All generic stuff moved to
fs/fs_pin.c; the next step will rip all the knowledge of kernel/acct.c from
fs/super.c and fs/namespace.c.  After that - death to mnt_pin(); it was
intended to be usable as generic mechanism for code that wants to attach
objects to vfsmount, so that they would not make the sucker busy and
would get killed on umount.  Never got it right; it remained acct.c-specific
all along.  Now it's very close to being killable.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Like commit f9c78b2b, move this block related file outside
of fs/ and into the core block directory, block/.
Signed-off-by: NJens Axboe <axboe@fb.com>

They really belong in block/, especially now since it's not in
drivers/block/ anymore. Additionally, the get_maintainer script
gets it wrong when in fs/.
Suggested-by: NChristoph Hellwig <hch@infradead.org>
Acked-by: NAl Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NJens Axboe <axboe@fb.com>

As sysfs was kernfs's only user, kernfs has been piggybacking on
CONFIG_SYSFS; however, kernfs is scheduled to grow a new user very
soon.  Introduce a separate config option CONFIG_KERNFS which is to be
selected by kernfs users.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

And instead convert tmpfs to use the new generic ACL code, with two stub
methods provided for in-memory filesystems.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Core sysfs implementation will be separated into kernfs so that it can
be used by other non-kobject users.

This patch creates fs/kernfs/ directory and makes boilerplate changes.
kernfs interface will be directly based on sysfs_dirent and its
forward declaration is moved to include/linux/kernfs.h which is
included from include/linux/sysfs.h.  sysfs core implementation will
be gradually separated out and moved to kernfs.

This patch doesn't introduce any functional changes.

v2: mount.c added.
Signed-off-by: NTejun Heo <tj@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add a new configuration option CONFIG_BINFMT_SCRIPT to configure support
for interpreted scripts starting with "#!"; allow compiling out that
support, or building it as a module.  Embedded systems running exclusively
compiled binaries could leave this support out, and systems that don't
need scripts before mounting the root filesystem can build this as a
module.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

drop_caches.c provides code only invokable via sysctl, so don't compile it
in when CONFIG_SYSCTL=n.
Signed-off-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now that efivarfs uses the efivar API, move it out of efivars.c and
into fs/efivarfs where it belongs. This move will eventually allow us
to enable the efivarfs code without having to also enable
CONFIG_EFI_VARS built, and vice versa.

Furthermore, things like,

    mount -t efivarfs none /sys/firmware/efi/efivars

will now work if efivarfs is built as a module without requiring the
use of MODULE_ALIAS(), which would have been necessary when the
efivarfs code was part of efivars.c.

Cc: Matthew Garrett <matthew.garrett@nebula.com>
Cc: Jeremy Kerr <jk@ozlabs.org>
Reviewed-by: NTom Gundersen <teg@jklm.no>
Tested-by: NTom Gundersen <teg@jklm.no>
Signed-off-by: NMatt Fleming <matt.fleming@intel.com>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

This adds Makefile and Kconfig for f2fs, and updates Makefile and Kconfig files
in the fs directory.
Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>

Adds an expert Kconfig option, CONFIG_COREDUMP, which allows disabling of
core dump.  This saves approximately 2.6k in the compiled kernel, and
complements CONFIG_ELF_CORE, which now depends on it.

CONFIG_COREDUMP also disables coredump-related sysctls, except for
suid_dumpable and related functions, which are necessary for ptrace.

[akpm@linux-foundation.org: fix binfmt_aout.c build]
Signed-off-by: NAlex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Acked-by: NKees Cook <keescook@chromium.org>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This prepares for making core dump functionality optional.

The variable "suid_dumpable" and associated functions are left in fs/exec.c
because they're used elsewhere, such as in ptrace.
Signed-off-by: NAlex Kelly <alex.page.kelly@gmail.com>
Reviewed-by: NJosh Triplett <josh@joshtriplett.org>
Acked-by: NSerge Hallyn <serge.hallyn@canonical.com>
Acked-by: NKees Cook <keescook@chromium.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Adds support for qnx6fs readonly support to the linux kernel.

* Mount option
  The option mmi_fs can be used to mount Harman Becker/Audi MMI 3G
  HDD qnx6fs filesystems.

* Documentation
  A high level filesystem stucture description can be found in the
  Documentation/filesystems directory. (qnx6.txt)

* Additional features
  - Active (stable) superblock selection
  - Superblock checksum check (enforced)
  - Supports mount of qnx6 filesystems with to host different endianess
  - Automatic endianess detection
  - Longfilename support (with non-enfocing crc check)
  - All blocksizes (512, 1024, 2048 and 4096 supported)
Signed-off-by: NKai Bankett <chaosman@ontika.net>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

rationale: that stuff is far tighter bound to fs/namespace.c than to
the guts of procfs proper.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

In my last patch I did a stupid mistake and broke the exofs
compilation completely. Fix it ASAP.

Instead of obj-y I did obj-$(y)

Really Really sorry. Me totally blushing :-{|
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

fs/exofs directory has multiple targets now, of which the
ore.ko will be needed by the pnfs-objects-layout-driver
(fs/nfs/objlayout).

As suggested by: Michal Marek <mmarek@suse.cz>  convert
inclusion of exofs/ from obj-$(CONFIG_EXOFS_FS) => obj-$(y).
So ORE can be selected also from fs/nfs/Kconfig

CC: Michal Marek <mmarek@suse.cz>
CC: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: NBoaz Harrosh <bharrosh@panasas.com>

As promised in feature-removal-schedule.txt it is time to
remove the nfsctl system call.

Userspace has perferred to not use this call throughout 2.6 and it has been
excluded in the default configuration since 2.6.36 (9 months ago).

So this patch removes all the code that was being compiled out.

There are still references to sys_nfsctl in various arch systemcall tables
and related code.  These should be cleaned out too, probably in the next
merge window.
Signed-off-by: NNeilBrown <neilb@suse.de>
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>