Some of the statistics values exported by KVM are always only 0 or 1.
It can be useful to export this fact to userspace so that it can track
them specially (for example by polling the value every now and then to
compute a % of time spent in a specific state).

Therefore, add "boolean value" as a new "unit".  While it is not exactly
a unit, it walks and quacks like one.  In particular, using the type
would be wrong because boolean values could be instantaneous or peak
values (e.g. "is the rmap allocated?") or even two-bucket histograms
(e.g. "number of posted vs. non-posted interrupt injections").
Suggested-by: NAmneesh Singh <natto@weirdnatto.in>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

The return thunk call makes the fastop functions larger, just like IBT
does. Consider a 16-byte FASTOP_SIZE when CONFIG_RETHUNK is enabled.

Otherwise, functions will be incorrectly aligned and when computing their
position for differently sized operators, they will executed in the middle
or end of a function, which may as well be an int3, leading to a crash
like:

[   36.091116] int3: 0000 [#1] SMP NOPTI
[   36.091119] CPU: 3 PID: 1371 Comm: qemu-system-x86 Not tainted 5.15.0-41-generic #44
[   36.091120] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.15.0-1 04/01/2014
[   36.091121] RIP: 0010:xaddw_ax_dx+0x9/0x10 [kvm]
[   36.091185] Code: 00 0f bb d0 c3 cc cc cc cc 48 0f bb d0 c3 cc cc cc cc 0f 1f 80 00 00 00 00 0f c0 d0 c3 cc cc cc cc 66 0f c1 d0 c3 cc cc cc cc <0f> 1f 80 00 00 00 00 0f c1 d0 c3 cc cc cc cc 48 0f c1 d0 c3 cc cc
[   36.091186] RSP: 0018:ffffb1f541143c98 EFLAGS: 00000202
[   36.091188] RAX: 0000000089abcdef RBX: 0000000000000001 RCX: 0000000000000000
[   36.091188] RDX: 0000000076543210 RSI: ffffffffc073c6d0 RDI: 0000000000000200
[   36.091189] RBP: ffffb1f541143ca0 R08: ffff9f1803350a70 R09: 0000000000000002
[   36.091190] R10: ffff9f1803350a70 R11: 0000000000000000 R12: ffff9f1803350a70
[   36.091190] R13: ffffffffc077fee0 R14: 0000000000000000 R15: 0000000000000000
[   36.091191] FS:  00007efdfce8d640(0000) GS:ffff9f187dd80000(0000) knlGS:0000000000000000
[   36.091192] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   36.091192] CR2: 0000000000000000 CR3: 0000000009b62002 CR4: 0000000000772ee0
[   36.091195] PKRU: 55555554
[   36.091195] Call Trace:
[   36.091197]  <TASK>
[   36.091198]  ? fastop+0x5a/0xa0 [kvm]
[   36.091222]  x86_emulate_insn+0x7b8/0xe90 [kvm]
[   36.091244]  x86_emulate_instruction+0x2f4/0x630 [kvm]
[   36.091263]  ? kvm_arch_vcpu_load+0x7c/0x230 [kvm]
[   36.091283]  ? vmx_prepare_switch_to_host+0xf7/0x190 [kvm_intel]
[   36.091290]  complete_emulated_mmio+0x297/0x320 [kvm]
[   36.091310]  kvm_arch_vcpu_ioctl_run+0x32f/0x550 [kvm]
[   36.091330]  kvm_vcpu_ioctl+0x29e/0x6d0 [kvm]
[   36.091344]  ? kvm_vcpu_ioctl+0x120/0x6d0 [kvm]
[   36.091357]  ? __fget_files+0x86/0xc0
[   36.091362]  ? __fget_files+0x86/0xc0
[   36.091363]  __x64_sys_ioctl+0x92/0xd0
[   36.091366]  do_syscall_64+0x59/0xc0
[   36.091369]  ? syscall_exit_to_user_mode+0x27/0x50
[   36.091370]  ? do_syscall_64+0x69/0xc0
[   36.091371]  ? syscall_exit_to_user_mode+0x27/0x50
[   36.091372]  ? __x64_sys_writev+0x1c/0x30
[   36.091374]  ? do_syscall_64+0x69/0xc0
[   36.091374]  ? exit_to_user_mode_prepare+0x37/0xb0
[   36.091378]  ? syscall_exit_to_user_mode+0x27/0x50
[   36.091379]  ? do_syscall_64+0x69/0xc0
[   36.091379]  ? do_syscall_64+0x69/0xc0
[   36.091380]  ? do_syscall_64+0x69/0xc0
[   36.091381]  ? do_syscall_64+0x69/0xc0
[   36.091381]  entry_SYSCALL_64_after_hwframe+0x61/0xcb
[   36.091384] RIP: 0033:0x7efdfe6d1aff
[   36.091390] Code: 00 48 89 44 24 18 31 c0 48 8d 44 24 60 c7 04 24 10 00 00 00 48 89 44 24 08 48 8d 44 24 20 48 89 44 24 10 b8 10 00 00 00 0f 05 <41> 89 c0 3d 00 f0 ff ff 77 1f 48 8b 44 24 18 64 48 2b 04 25 28 00
[   36.091391] RSP: 002b:00007efdfce8c460 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
[   36.091393] RAX: ffffffffffffffda RBX: 000000000000ae80 RCX: 00007efdfe6d1aff
[   36.091393] RDX: 0000000000000000 RSI: 000000000000ae80 RDI: 000000000000000c
[   36.091394] RBP: 0000558f1609e220 R08: 0000558f13fb8190 R09: 00000000ffffffff
[   36.091394] R10: 0000558f16b5e950 R11: 0000000000000246 R12: 0000000000000000
[   36.091394] R13: 0000000000000001 R14: 0000000000000000 R15: 0000000000000000
[   36.091396]  </TASK>
[   36.091397] Modules linked in: isofs nls_iso8859_1 kvm_intel joydev kvm input_leds serio_raw sch_fq_codel dm_multipath scsi_dh_rdac scsi_dh_emc scsi_dh_alua ipmi_devintf ipmi_msghandler drm msr ip_tables x_tables autofs4 btrfs blake2b_generic zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel virtio_net net_failover crypto_simd ahci xhci_pci cryptd psmouse virtio_blk libahci xhci_pci_renesas failover
[   36.123271] ---[ end trace db3c0ab5a48fabcc ]---
[   36.123272] RIP: 0010:xaddw_ax_dx+0x9/0x10 [kvm]
[   36.123319] Code: 00 0f bb d0 c3 cc cc cc cc 48 0f bb d0 c3 cc cc cc cc 0f 1f 80 00 00 00 00 0f c0 d0 c3 cc cc cc cc 66 0f c1 d0 c3 cc cc cc cc <0f> 1f 80 00 00 00 00 0f c1 d0 c3 cc cc cc cc 48 0f c1 d0 c3 cc cc
[   36.123320] RSP: 0018:ffffb1f541143c98 EFLAGS: 00000202
[   36.123321] RAX: 0000000089abcdef RBX: 0000000000000001 RCX: 0000000000000000
[   36.123321] RDX: 0000000076543210 RSI: ffffffffc073c6d0 RDI: 0000000000000200
[   36.123322] RBP: ffffb1f541143ca0 R08: ffff9f1803350a70 R09: 0000000000000002
[   36.123322] R10: ffff9f1803350a70 R11: 0000000000000000 R12: ffff9f1803350a70
[   36.123323] R13: ffffffffc077fee0 R14: 0000000000000000 R15: 0000000000000000
[   36.123323] FS:  00007efdfce8d640(0000) GS:ffff9f187dd80000(0000) knlGS:0000000000000000
[   36.123324] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   36.123325] CR2: 0000000000000000 CR3: 0000000009b62002 CR4: 0000000000772ee0
[   36.123327] PKRU: 55555554
[   36.123328] Kernel panic - not syncing: Fatal exception in interrupt
[   36.123410] Kernel Offset: 0x1400000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
[   36.135305] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---

Fixes: aa3d4803 ("x86: Use return-thunk in asm code")
Signed-off-by: NThadeu Lima de Souza Cascardo <cascardo@canonical.com>
Co-developed-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: NLinux Kernel Functional Testing <lkft@linaro.org>
Message-Id: <20220713171241.184026-1-cascardo@canonical.com>
Tested-by: NJack Wang <jinpu.wang@ionos.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>

 KVM/riscv fixes for 5.19, take #2

- Fix missing PAGE_PFN_MASK

- Fix SRCU deadlock caused by kvm_riscv_check_vcpu_requests()

When using the FIDEDUPRANGE ioctl, in case of success the requested size
is returned. In some cases this might not be the actual amount of bytes
deduplicated.

This change modifies vfs_dedupe_file_range() to report the actual amount
of bytes deduplicated, instead of the requested amount.

Link: https://lore.kernel.org/linux-fsdevel/5548ef63-62f9-4f46-5793-03165ceccacc@tu-darmstadt.de/Reported-by: NAnsgar Lößer <ansgar.loesser@kom.tu-darmstadt.de>
Reported-by: NMax Schlecht <max.schlecht@informatik.hu-berlin.de>
Reported-by: NBjörn Scheuermann <scheuermann@kom.tu-darmstadt.de>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Darrick J Wong <djwong@kernel.org>
Signed-off-by: NAnsgar Lößer <ansgar.loesser@kom.tu-darmstadt.de>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull cgroup fix from Tejun Heo:
 "Fix an old and subtle bug in the migration path.

  css_sets are used to track tasks and migrations are tasks moving from
  a group of css_sets to another group of css_sets. The migration path
  pins all source and destination css_sets in the prep stage.

  Unfortunately, it was overloading the same list_head entry to track
  sources and destinations, which got confused for migrations which are
  partially identity leading to use-after-frees.

  Fixed by using dedicated list_heads for tracking sources and
  destinations"

* tag 'cgroup-for-5.19-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Use separate src/dst nodes when preloading css_sets for migration

If dedupe of an EOF block is not constrainted to match against only
other EOF blocks with the same EOF offset into the block, it can
match against any other block that has the same matching initial
bytes in it, even if the bytes beyond EOF in the source file do
not match.

Fix this by constraining the EOF block matching to only match
against other EOF blocks that have identical EOF offsets and data.
This allows "whole file dedupe" to continue to work without allowing
eof blocks to randomly match against partial full blocks with the
same data.
Reported-by: NAnsgar Lößer <ansgar.loesser@tu-darmstadt.de>
Fixes: 1383a7ed ("vfs: check file ranges before cloning files")
Link: https://lore.kernel.org/linux-fsdevel/a7c93559-4ba1-df2f-7a85-55a143696405@tu-darmstadt.de/Signed-off-by: NDave Chinner <dchinner@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull tracing fixes from Steven Rostedt:
 "Fixes and minor clean ups for tracing:

   - Fix memory leak by reverting what was thought to be a double free.

     A static tool had gave a false positive that a double free was
     possible in the error path, but it was actually a different
     location that confused the static analyzer (and those of us that
     reviewed it).

   - Move use of static buffers by ftrace_dump() to a location that can
     be used by kgdb's ftdump(), as it needs it for the same reasons.

   - Clarify in the Kconfig description that function tracing has
     negligible impact on x86, but may have a bit bigger impact on other
     architectures.

   - Remove unnecessary extra semicolon in trace event.

   - Make a local variable static that is used in the fprobes sample

   - Use KSYM_NAME_LEN for length of function in kprobe sample and get
     rid of unneeded macro for the same purpose"

* tag 'trace-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  samples: Use KSYM_NAME_LEN for kprobes
  fprobe/samples: Make sample_probe static
  blk-iocost: tracing: atomic64_read(&ioc->vtime_rate) is assigned an extra semicolon
  ftrace: Be more specific about arch impact when function tracer is enabled
  tracing: Fix sleeping while atomic in kdb ftdump
  tracing/histograms: Fix memory leak problem

It is better and enough to use KSYM_NAME_LEN for kprobes
in samples, no need to define and use the other values.

Link: https://lkml.kernel.org/r/1654651402-21552-1-git-send-email-yangtiezhu@loongson.cnSigned-off-by: NTiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: NMasami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>

This symbol is not used outside of fprobe_example.c, so marks it static.

Fixes the following warning:

sparse warnings: (new ones prefixed by >>)
>> samples/fprobe/fprobe_example.c:23:15: sparse: sparse: symbol 'sample_probe'
was not declared. Should it be static?

Link: https://lkml.kernel.org/r/20220606075659.674556-1-sunliming@kylinos.cnReported-by: Nkernel test robot <lkp@intel.com>
Signed-off-by: Nsunliming <sunliming@kylinos.cn>
Acked-by: NMasami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>

Remove extra semicolon.

Link: https://lkml.kernel.org/r/20220629030013.10362-1-kunyu@nfschina.com

Cc: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: NLi kunyu <kunyu@nfschina.com>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>

It was brought up that on ARMv7, that because the FUNCTION_TRACER does not
use nops to keep function tracing disabled because of the use of a link
register, it does have some performance impact.

The start of functions when -pg is used to compile the kernel is:

	push    {lr}
	bl      8010e7c0 <__gnu_mcount_nc>

When function tracing is tuned off, it becomes:

	push    {lr}
	add   sp, sp, #4

Which just puts the stack back to its normal location. But these two
instructions at the start of every function does incur some overhead.

Be more honest in the Kconfig FUNCTION_TRACER description and specify that
the overhead being in the noise was x86 specific, but other architectures
may vary.

Link: https://lore.kernel.org/all/20220705105416.GE5208@pengutronix.de/
Link: https://lkml.kernel.org/r/20220706161231.085a83da@gandalf.local.homeReported-by: NSascha Hauer <sha@pengutronix.de>
Acked-by: NSascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>

If you drop into kdb and type "ftdump" you'll get a sleeping while
atomic warning from memory allocation in trace_find_next_entry().

This appears to have been caused by commit ff895103 ("tracing:
Save off entry when peeking at next entry"), which added the
allocation in that path. The problematic commit was already fixed by
commit 8e99cf91 ("tracing: Do not allocate buffer in
trace_find_next_entry() in atomic") but that fix missed the kdb case.

The fix here is easy: just move the assignment of the static buffer to
the place where it should have been to begin with:
trace_init_global_iter(). That function is called in two places, once
is right before the assignment of the static buffer added by the
previous fix and once is in kdb.

Note that it appears that there's a second static buffer that we need
to assign that was added in commit efbbdaa2 ("tracing: Show real
address for trace event arguments"), so we'll move that too.

Link: https://lkml.kernel.org/r/20220708170919.1.I75844e5038d9425add2ad853a608cb44bb39df40@changeid

Fixes: ff895103 ("tracing: Save off entry when peeking at next entry")
Fixes: efbbdaa2 ("tracing: Show real address for trace event arguments")
Signed-off-by: NDouglas Anderson <dianders@chromium.org>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>

This reverts commit 46bbe5c6.

As commit 46bbe5c6 ("tracing: fix double free") said, the
"double free" problem reported by clang static analyzer is:
  > In parse_var_defs() if there is a problem allocating
  > var_defs.expr, the earlier var_defs.name is freed.
  > This free is duplicated by free_var_defs() which frees
  > the rest of the list.

However, if there is a problem allocating N-th var_defs.expr:
  + in parse_var_defs(), the freed 'earlier var_defs.name' is
    actually the N-th var_defs.name;
  + then in free_var_defs(), the names from 0th to (N-1)-th are freed;

                        IF ALLOCATING PROBLEM HAPPENED HERE!!! -+
                                                                 \
                                                                  |
          0th           1th                 (N-1)-th      N-th    V
          +-------------+-------------+-----+-------------+-----------
var_defs: | name | expr | name | expr | ... | name | expr | name | ///
          +-------------+-------------+-----+-------------+-----------

These two frees don't act on same name, so there was no "double free"
problem before. Conversely, after that commit, we get a "memory leak"
problem because the above "N-th var_defs.name" is not freed.

If enable CONFIG_DEBUG_KMEMLEAK and inject a fault at where the N-th
var_defs.expr allocated, then execute on shell like:
  $ echo 'hist:key=call_site:val=$v1,$v2:v1=bytes_req,v2=bytes_alloc' > \
/sys/kernel/debug/tracing/events/kmem/kmalloc/trigger

Then kmemleak reports:
  unreferenced object 0xffff8fb100ef3518 (size 8):
    comm "bash", pid 196, jiffies 4295681690 (age 28.538s)
    hex dump (first 8 bytes):
      76 31 00 00 b1 8f ff ff                          v1......
    backtrace:
      [<0000000038fe4895>] kstrdup+0x2d/0x60
      [<00000000c99c049a>] event_hist_trigger_parse+0x206f/0x20e0
      [<00000000ae70d2cc>] trigger_process_regex+0xc0/0x110
      [<0000000066737a4c>] event_trigger_write+0x75/0xd0
      [<000000007341e40c>] vfs_write+0xbb/0x2a0
      [<0000000087fde4c2>] ksys_write+0x59/0xd0
      [<00000000581e9cdf>] do_syscall_64+0x3a/0x80
      [<00000000cf3b065c>] entry_SYSCALL_64_after_hwframe+0x46/0xb0

Link: https://lkml.kernel.org/r/20220711014731.69520-1-zhengyejian1@huawei.com

Cc: stable@vger.kernel.org
Fixes: 46bbe5c6 ("tracing: fix double free")
Reported-by: NHulk Robot <hulkci@huawei.com>
Suggested-by: NSteven Rostedt <rostedt@goodmis.org>
Reviewed-by: NTom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: NZheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: NSteven Rostedt (Google) <rostedt@goodmis.org>

Pull overlayfs fix from Miklos Szeredi:
 "Add a temporary fix for posix acls on idmapped mounts introduced in
  this cycle. A proper fix will be added in the next cycle"

* tag 'ovl-fixes-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs:
  ovl: turn off SB_POSIXACL with idmapped layers temporarily

Pull drm fixes from Dave Airlie:
 "I see you picked up one of the fbdev fixes, this is the other stuff
  that was queued up last week.

  A bit of a scattering of fixes, three for i915, one amdgpu, and a
  couple of panfrost, rockchip, panel and bridge ones.

  amdgpu:
   - Hibernation fix

  dma-buf:
   - fix use after free of fence

  i915:
   - Fix a possible refcount leak in DP MST connector (Hangyu)
   - Fix on loading guc on ADL-N (Daniele)
   - Fix vm use-after-free in vma destruction (Thomas)

  bridge:
   - fsl-ldb : 3 LVDS modesetting fixes

  rockchip:
   - iommu domain fix

  panfrost:
   - fix memory corruption
   - error path fix

  panel:
   - orientation quirk fix for Yoga tablet 2

  ssd130x:
   - fix pre-charge period setting"

* tag 'drm-fixes-2022-07-12' of git://anongit.freedesktop.org/drm/drm:
  drm/ssd130x: Fix pre-charge period setting
  dma-buf: Fix one use-after-free of fence
  drm/i915: Fix vm use-after-free in vma destruction
  drm/i915/guc: ADL-N should use the same GuC FW as ADL-S
  drm/i915: fix a possible refcount leak in intel_dp_add_mst_connector()
  drm/amdgpu/display: disable prefer_shadow for generic fb helpers
  drm/amdgpu: keep fbdev buffers pinned during suspend
  drm/panfrost: Fix shrinker list corruption by madvise IOCTL
  drm/panfrost: Put mapping instead of shmem obj on panfrost_mmu_map_fault_addr() error
  drm/rockchip: Detach from ARM DMA domain in attach_device
  drm/bridge: fsl-ldb: Drop DE signal polarity inversion
  drm/bridge: fsl-ldb: Enable split mode for LVDS dual link
  drm/bridge: fsl-ldb: Fix mode clock rate validation
  drm/aperture: Run fbdev removal before internal helpers
  drm: panel-orientation-quirks: Add quirk for the Lenovo Yoga Tablet 2 830

Pull lockdep fix for x86 retbleed from Borislav Petkov:

 - Fix lockdep complaint for __static_call_fixup()

* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/static_call: Serialize __static_call_fixup() properly

__static_call_fixup() invokes __static_call_transform() without holding
text_mutex, which causes lockdep to complain in text_poke_bp().

Adding the proper locking cures that, but as this is either used during
early boot or during module finalizing, it's not required to use
text_poke_bp(). Add an argument to __static_call_transform() which tells
it to use text_poke_early() for it.

Fixes: ee88d363 ("x86,static_call: Use alternative RET encoding")
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Signed-off-by: NBorislav Petkov <bp@suse.de>

Pull x86 retbleed fixes from Borislav Petkov:
 "Just when you thought that all the speculation bugs were addressed and
  solved and the nightmare is complete, here's the next one: speculating
  after RET instructions and leaking privileged information using the
  now pretty much classical covert channels.

  It is called RETBleed and the mitigation effort and controlling
  functionality has been modelled similar to what already existing
  mitigations provide"

* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
  x86/speculation: Disable RRSBA behavior
  x86/kexec: Disable RET on kexec
  x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
  x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
  x86/bugs: Add Cannon lake to RETBleed affected CPU list
  x86/retbleed: Add fine grained Kconfig knobs
  x86/cpu/amd: Enumerate BTC_NO
  x86/common: Stamp out the stepping madness
  KVM: VMX: Prevent RSB underflow before vmenter
  x86/speculation: Fill RSB on vmexit for IBRS
  KVM: VMX: Fix IBRS handling after vmexit
  KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
  KVM: VMX: Convert launched argument to flags
  KVM: VMX: Flatten __vmx_vcpu_run()
  objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
  x86/speculation: Remove x86_spec_ctrl_mask
  x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
  x86/speculation: Fix SPEC_CTRL write on SMT state change
  x86/speculation: Fix firmware entry SPEC_CTRL handling
  x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
  ...

Merge tag 'drm-misc-fixes-2022-07-07-1' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

Three mode setting fixes for fsl-ldb, a fbdev removal use-after-free fix,
a dma-buf fence use-after-free fix, a DMA setup fix for rockchip, an error
path fix and memory corruption fix for panfrost and one more orientation
quirk
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20220708054306.wr6jcfdunuypftbq@houat

Merge tag 'drm-intel-fixes-2022-07-07' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix a possible refcount leak in DP MST connector (Hangyu)
- Fix on loading guc on ADL-N (Daniele)
- Fix vm use-after-free in vma destruction (Thomas)
Signed-off-by: NDave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YsbbgWnLTR8fr4lj@intel.com

Merge tag 'amd-drm-fixes-5.19-2022-07-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.19-2022-07-06:

amdgpu:
- Hibernation fix
Signed-off-by: NDave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220707024421.5773-1-alexander.deucher@amd.com

Pull btrfs fixes from David Sterba:
 "A more fixes that seem to me to be important enough to get merged
  before release:

   - in zoned mode, fix leak of a structure when reading zone info, this
     happens on normal path so this can be significant

   - in zoned mode, revert an optimization added in 5.19-rc1 to finish a
     zone when the capacity is full, but this is not reliable in all
     cases

   - try to avoid short reads for compressed data or inline files when
     it's a NOWAIT read, applications should handle that but there are
     two, qemu and mariadb, that are affected"

* tag 'for-5.19-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: drop optimization of zone finish
  btrfs: zoned: fix a leaked bioc in read_zone_info
  btrfs: return -EAGAIN for NOWAIT dio reads/writes on compressed and inline extents

Merge tags 'free-mq_sysctls-for-v5.19' and 'ptrace_unfreeze_fix-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace

Pull ipc namespace fix from Eric Biederman:
 "This fixes a bug with error handling if ipc creation fails that was
  reported by syzbot"

For completeness, this also pulls the ptrace_unfreeze_fix tag that
contains the original version of one of the hotfixes that I manually
applied earlier so that it would be fixed in rc6.

* tag 'free-mq_sysctls-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ipc: Free mq_sysctls if ipc namespace creation failed

* tag 'ptrace_unfreeze_fix-for-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ptrace: fix clearing of JOBCTL_TRACED in ptrace_unfreeze_traced()

Pull hotfixes from Andrew Morton:
 "Mainly MM fixes. About half for issues which were introduced after
  5.18 and the remainder for longer-term issues"

* tag 'mm-hotfixes-stable-2022-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: split huge PUD on wp_huge_pud fallback
  nilfs2: fix incorrect masking of permission flags for symlinks
  mm/rmap: fix dereferencing invalid subpage pointer in try_to_migrate_one()
  riscv/mm: fix build error while PAGE_TABLE_CHECK enabled without MMU
  Documentation: highmem: use literal block for code example in highmem.h comment
  mm: sparsemem: fix missing higher order allocation splitting
  mm/damon: use set_huge_pte_at() to make huge pte old
  sh: convert nommu io{re,un}map() to static inline functions
  mm: userfaultfd: fix UFFDIO_CONTINUE on fallocated shmem pages

Pull module fixes from Luis Chamberlain:
 "Although most of the move of code in in v5.19-rc1 should have not
  introduced a regression patch review on one of the file changes
  captured a checkpatch warning which advised to use strscpy() and it
  caused a buffer overflow when an incorrect length is passed.

  Another change which checkpatch complained about was an odd RCU usage,
  but that was properly addressed in a separate patch to the move by
  Aaron. That caused a regression with PREEMPT_RT=y due to an unbounded
  latency.

  This series fixes both and adjusts documentation which we forgot to do
  for the move"

* tag 'modules-5.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: kallsyms: Ensure preemption in add_kallsyms() with PREEMPT_RT
  doc: module: update file references
  module: Fix "warning: variable 'exit' set but not used"
  module: Fix selfAssignment cppcheck warning
  modules: Fix corruption of /proc/kallsyms

The commit 08126db5 ("module: kallsyms: Fix suspicious rcu usage")
under PREEMPT_RT=y, disabling preemption introduced an unbounded
latency since the loop is not fixed. This change caused a regression
since previously preemption was not disabled and we would dereference
RCU-protected pointers explicitly. That being said, these pointers
cannot change.

Before kallsyms-specific data is prepared/or set-up, we ensure that
the unformed module is known to be unique i.e. does not already exist
(see load_module()). Therefore, we can fix this by using the common and
more appropriate RCU flavour as this section of code can be safely
preempted.
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Fixes: 08126db5 ("module: kallsyms: Fix suspicious rcu usage")
Signed-off-by: NAaron Tomlin <atomlin@redhat.com>
Signed-off-by: NLuis Chamberlain <mcgrof@kernel.org>

Pull VFIO fix from Alex Williamson:

 - Move IOMMU test to unbreak no-iommu support (Jason Gunthorpe)

* tag 'vfio-v5.19-rc7' of https://github.com/awilliam/linux-vfio:
  vfio: Move IOMMU_CAP_CACHE_COHERENCY test to after we know we have a group

As Chris explains, the comment above exit_itimers() is not correct,
we can race with proc_timers_seq_ops. Change exit_itimers() to clear
signal->posix_timers with ->siglock held.

Cc: <stable@vger.kernel.org>
Reported-by: chris@accessvector.net
Signed-off-by: NOleg Nesterov <oleg@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The kvm_riscv_check_vcpu_requests() is called with SRCU read lock held
and for KVM_REQ_SLEEP request it will block the VCPU without releasing
SRCU read lock. This causes KVM ioctls (such as KVM_IOEVENTFD) from
other VCPUs of the same Guest/VM to hang/deadlock if there is any
synchronize_srcu() or synchronize_srcu_expedited() in the path.

To fix the above in kvm_riscv_check_vcpu_requests(), we should do SRCU
read unlock before blocking the VCPU and do SRCU read lock after VCPU
wakeup.

Fixes: cce69aff ("RISC-V: KVM: Implement VCPU interrupts and requests handling")
Reported-by: NBin Meng <bmeng.cn@gmail.com>
Signed-off-by: NAnup Patel <apatel@ventanamicro.com>
Reviewed-by: NAtish Patra <atishp@rivosinc.com>
Tested-by: NHeinrich Schuchardt <heinrich.schuchardt@canonical.com>
Tested-by: NBin Meng <bmeng.cn@gmail.com>
Signed-off-by: NAnup Patel <anup@brainfault.org>

There are a bunch of functions that use the PFN from a page table entry
that end up with the svpbmt upper-bits because they are missing the newly
introduced PAGE_PFN_MASK which leads to wrong addresses conversions and
then crash: fix this by adding this mask.

Fixes: 100631b4 ("riscv: Fix accessing pfn bits in PTEs for non-32bit variants")
Signed-off-by: NAlexandre Ghiti <alexandre.ghiti@canonical.com>
Signed-off-by: NAnup Patel <anup@brainfault.org>

This is a collection of three fixes for small annoyances.

Two of these are already pending in other trees, but I really don't want
to release another -rc with these issues pending, so I picked up the
patches for these things directly.  We'll end up with duplicate commits
eventually, I prefer that over having these issues pending.

The third one is just me getting rid of another BUG_ON() just because it
was reported and I dislike those things so much.

* merge 'hot-fixes' branch:
  ida: don't use BUG_ON() for debugging
  drm/aperture: Run fbdev removal before internal helpers
  ptrace: fix clearing of JOBCTL_TRACED in ptrace_unfreeze_traced()

This is another old BUG_ON() that just shouldn't exist (see also commit
a382f8fe: "signal handling: don't use BUG_ON() for debugging").

In fact, as Matthew Wilcox points out, this condition shouldn't really
even result in a warning, since a negative id allocation result is just
a normal allocation failure:

  "I wonder if we should even warn here -- sure, the caller is trying to
   free something that wasn't allocated, but we don't warn for
   kfree(NULL)"

and goes on to point out how that current error check is only causing
people to unnecessarily do their own index range checking before freeing
it.

This was noted by Itay Iellin, because the bluetooth HCI socket cookie
code does *not* do that range checking, and ends up just freeing the
error case too, triggering the BUG_ON().

The HCI code requires CAP_NET_RAW, and seems to just result in an ugly
splat, but there really is no reason to BUG_ON() here, and we have
generally striven for allocation models where it's always ok to just do

    free(alloc());

even if the allocation were to fail for some random reason (usually
obviously that "random" reason being some resource limit).

Fixes: 88eca020 ("ida: simplified functions for id allocation")
Reported-by: NItay Iellin <ieitayie@gmail.com>
Suggested-by: NMatthew Wilcox <willy@infradead.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull dmaengine fixes from Vinod Koul:
 "One core fix for DMA_INTERRUPT and rest driver fixes.

  Core:

   - Revert verification of DMA_INTERRUPT capability as that was
     incorrect

  Bunch of driver fixes for:

   - ti: refcount and put_device leak

   - qcom_bam: runtime pm overflow

   - idxd: force wq context cleanup and call idxd_enable_system_pasid()
     on success

   - dw-axi-dmac: RMW on channel suspend register

   - imx-sdma: restart cyclic channel when enabled

   - at_xdma: error handling for at_xdmac_alloc_desc

   - pl330: lockdep warning

   - lgm: error handling path in probe

   - allwinner: Fix min/max typo in binding"

* tag 'dmaengine-fix-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dt-bindings: dma: allwinner,sun50i-a64-dma: Fix min/max typo
  dmaengine: lgm: Fix an error handling path in intel_ldma_probe()
  dmaengine: pl330: Fix lockdep warning about non-static key
  dmaengine: idxd: Only call idxd_enable_system_pasid() if succeeded in enabling SVA feature
  dmaengine: at_xdma: handle errors of at_xdmac_alloc_desc() correctly
  dmaengine: imx-sdma: only restart cyclic channel when enabled
  dmaengine: dw-axi-dmac: Fix RMW on channel suspend register
  dmaengine: idxd: force wq context cleanup on device disable path
  dmaengine: qcom: bam_dma: fix runtime PM underflow
  dmaengine: imx-sdma: Allow imx8m for imx7 FW revs
  dmaengine: Revert "dmaengine: add verification of DMA_INTERRUPT capability for dmatest"
  dmaengine: ti: Add missing put_device in ti_dra7_xbar_route_allocate
  dmaengine: ti: Fix refcount leak in ti_dra7_xbar_route_allocate

Pull staging driver fix from Greg KH:
 "Here is a single staging driver fix for a reported problem that showed
  up in 5.19-rc1 in the wlan-ng driver. It has been in linux-next for a
  week with no reported problems"

* tag 'staging-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging/wlan-ng: get the correct struct hfa384x in work callback

Pull char/misc driver fixes from Greg KH:
 "Here are four small char/misc driver fixes for 5.19-rc6 to resolve
  some reported issues. They only affect two drivers:

   - rtsx_usb: fix for of-reported DMA warning error, the driver was
     handling memory buffers in odd ways, it has now been fixed up to be
     much simpler and correct by Shuah.

   - at25 eeprom driver bugfix for reported problem

  All of these have been in linux-next for a week with no reported
  problems"

* tag 'char-misc-5.19-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  misc: rtsx_usb: set return value in rsp_buf alloc err path
  misc: rtsx_usb: use separate command and response buffers
  misc: rtsx_usb: fix use of dma mapped buffer for usb bulk transfer
  eeprom: at25: Rework buggy read splitting

Pull io_uring fix from Jens Axboe:
 "A single fix for an issue that came up yesterday that we should plug
  for -rc6.

  This is a regression introduced in this cycle"

* tag 'io_uring-5.19-2022-07-09' of git://git.kernel.dk/linux-block:
  io_uring: check that we have a file table when allocating update slots

Merge tag 'kbuild-fixes-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Adjust gen_compile_commands.py to the format change of *.mod files

 - Remove unused macro in scripts/Makefile.modinst

* tag 'kbuild-fixes-v5.19-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kbuild: remove unused cmd_none in scripts/Makefile.modinst
  gen_compile_commands: handle multiple lines per .mod file

Pull irq fixes from Borislav Petkov:

 - Gracefully handle failure to request MMIO resources in the GICv3
   driver

 - Make a static key static in the Apple AIC driver

 - Fix the Xilinx intc driver dependency on OF_ADDRESS

* tag 'irq_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/apple-aic: Make symbol 'use_fast_ipi' static
  irqchip/xilinx: Add explicit dependency on OF_ADDRESS
  irqchip/gicv3: Handle resource request failure consistently

Pull x86 fixes from Borislav Petkov:

 - Prepare for and clear .brk early in order to address XenPV guests
   failures where the hypervisor verifies page tables and uninitialized
   data in that range leads to bogus failures in those checks

 - Add any potential setup_data entries supplied at boot to the identity
   pagetable mappings to prevent kexec kernel boot failures. Usually,
   this is not a problem for the normal kernel as those mappings are
   part of the initially mapped 2M pages but if kexec gets to allocate
   the second kernel somewhere else, those setup_data entries need to be
   mapped there too.

 - Fix objtool not to discard text references from the __tracepoints
   section so that ENDBR validation still works

 - Correct the setup_data types limit as it is user-visible, before 5.19
   releases

* tag 'x86_urgent_for_v5.19_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/boot: Fix the setup data types max limit
  x86/ibt, objtool: Don't discard text references from tracepoint section
  x86/compressed/64: Add identity mappings for setup_data entries
  x86: Fix .brk attribute in linker script
  x86: Clear .brk area at early boot
  x86/xen: Use clear_bss() for Xen PV guests