Current EQ delay is set to 0 to receive very high max interrupt per sec.
Set EQ delay to 32 - reducing max interrupt rate from 65K to 20K per sec.

Set TCP connection window size to 64K with scale shift count 2.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

In very rare scenario, connection gets killed after throwing this error:
scsi host0: BM_2312 : Event CXN_KILLED_BAD_WRB_INDEX_ERROR[15]... CID : 4
connection1:0: detected conn error (1011)

memset ISCSI_WRB descriptor to zero for all allocations of WRB handle.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

BUG: unable to handle kernel NULL pointer dereference at 000000000000015e
IP: [<ffffffffa0081700>]
hwi_get_async_handle.isra.23.constprop.39+0x90/0x1d0 [be2iscsi]
PGD 0
Oops: 0000 [#1] SMP
...
Call Trace:
 <IRQ>
 [<ffffffffa00818bc>] hwi_process_default_pdu_ring+0x7c/0x280 [be2iscsi]
 [<ffffffffa0088f51>] beiscsi_process_cq+0x321/0xb90 [be2iscsi]
 [<ffffffff810af028>] ? __wake_up_common+0x58/0x90
 [<ffffffff810b0d84>] ? __wake_up+0x44/0x50
 [<ffffffffa0089a2d>] be_iopoll+0x1d/0xb0 [be2iscsi]
 [<ffffffff812d1f61>] blk_iopoll_softirq+0xc1/0x100
 [<ffffffff81084b0f>] __do_softirq+0xef/0x280

The symptom observed is multiple async handles get queued for same index
thus causing leak in buffers posted to FW.

The root cause is:
- async handle is continued to be used even if it does not match the
completion.
- list_move operation done on already filled index.

1. Remove use of writables, host_write_ptr and ep_read_ptr.
2. Remove consumed logic to update writables. Instead, use only
free_entries to do the accounting of handles to be posted back.
3. Remove busy_list, instead use simple slot to index handles.
4. Added check no data, header less and overflow to make sure
all async_handles are flushed in error cases.
5. Added code to verify gathering of handles to form PDU by
checking final bit before forwarding PDU.
6. Added code to catch mismatch with CQE and handle gracefully.
7. Use AMAP, traverse cri_wait_queue list to post buffers, log
"async PDU" related errors.
8. Rearranged few data structures and added comments in init &
processing path.
9. Added WARN_ONs to catch any HD ring corruption.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Driver unload should call COMMON_FUNCTION_RESET. For TPE feature, this
ensures that FW has knowledge about driver getting unloaded and can
reset its bit vector.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Sessions are no longer valid, so schedule sess_work to fail the sessions
immediately when error is detected. This is done to avoid iSCSI transport
layer to keep sending NOP-Out which driver any ways fail.

Schedule sess_work immediately in case of HBA error. Old sessions are gone
for good and need to be re-established.

iscsi_session_failure needs process context hence this work.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

After UE is detected, check for recoverable error by reading
SLIPORT SEMAPHORE register. If transient parity error i.e. 0xExxx
then schedule recovery work on driver wq.

FLag this error to prevent any transactions for the duration of ue2rp to
restart polling. After that, if FW becomes ready then recover port.

Wake up processes in wq before going offline.
Wait for process to execute before cleaning up.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

mgmt_epfw_cleanup does not implement v1 of OPCODE_COMMON_ISCSI_CLEANUP
IOCTL for SkyHawk.

Replace use of MCCQ with BMBX for issuing the IOCTL.
Remove be_mcc_compl_poll which is no longer needed.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

SLIPORT FUNCTION_RESET does not reset the chip.
So POST status needs to be checked before issuing FUNCTION_RESET.
The completion of FUNCTION_RESET is indicated in BMBX Rdy bit.

be_cmd_fw_initialize too needs to be done before issuing any cmd to FW.
be_cmd_fw_initialize is renamed as beiscsi_cmd_special_wrb.
Rearrange and rename few functions in init and cleanup path.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

beiscsi_fail_session is defined in be_cmds.c: move it to be_iscsi.c
Move card configuration commands to be_cmds.c.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

BE3 and SH cards can recover from transient parity errors treated
earlier as unrecoverable errors.

Add IOCTL to query FW support for this feature.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

UE detection in health check is done in a work scheduled in global wq.
UE caused due to transient parity errors are recoverable and reported
within 1s. If this check for TPE gets delayed, PF0 might initiate
soft-reset and then status of UE recoverable is lost.

Handle UE detection in timer routine. Move out EQ delay update work
from health check. Make the IOCTL for EQ delay update non-blocking
as the completion status is ignored.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Boot work involves:
1. Find and fetch configured boot session and its handle.
2. Attempt to open the session if its not.
3. Get the session details for boot kset creation.
4. Logout of that session owned by FW.
5. Create boot kset for session details.

All these actions were done in blocking call with retries in global wq.
Other works in wq suffered if the IOCTLs stalled or timed out.

This change moves all the boot work to make it non-blocking.
The work queued in global wq just issues the IOCTL depending on the action
to be taken and mcc wq schedules work depending on status of the IOCTL.
Initial boot_work is started on link and ASYNC event.

The other code changes move all boot related functions in one place and
follow naming conventions.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Save ue_detected and fw_timeout errors in state field of beiscsi_hba.
BEISCSI_HBA_RUNNING
BEISCSI_HBA_LINK_UP
BEISCSI_HBA_BOOT_FOUND
BEISCSI_HBA_PCI_ERR
BEISCSI_HBA_FW_TIMEOUT
BEISCSI_HBA_IN_UE

Make sure no PCI transaction happens once in error state.
Add checks in IO path to detect HBA in error.

Skip hwi_purge_eq step which can't be done in error state.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

todo_mcc_cq is not needed as only MCC work is queued.
todo_cq is not used at all.
Rename functions to be consistent.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

alloc_mcc_tag was replaced with alloc_mcc_wrb and is no more used.
beiscsi_pci_soft_reset is not used at all and won't be needed.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Redefine FW IP types.
Before issuing IOCTL to clear IP, check if IP is all zeroes.
All zeroes IP implies IP is not set in FW so FW fails that IOCTL.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Wrong settings displayed for iface:
iface.header_digest = 192.168.197.22
iface.data_digest = 255.255.255.0
iface.immediate_data = 192.168.197.1

Process ISCSI_NET_PARAM only in beiscsi_iface_get_param.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Rename mgmt_get_if_info to be consistent with APIs name.
Rename create/destroy APIs to indicate IFACE operations.
Remove legacy be2iscsi and use beiscsi.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Move mgmt_get_all_if_id before any set param operation.
Rename mgmt_get_all_if_id to beiscsi_if_get_handle.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

VLAN tag is L2 construct, move VLAN code out from configuring IP.
Rearrange and rename the APIs to make it consistent.
Replace ENOSYS with EPERM.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

If BOOTPROTO is changed to static, the DHCP IP address should be released.
All cases are being handled mgmt_set_ip and mgmt_static_ip_modify.

Rearrange IFACE APIs to:
beiscsi_if_clr_ip
beiscsi_if_set_ip
beiscsi_if_en_static
beiscsi_if_en_dhcp

This simplifies release of DHCP IP when BOOTPROTO is set to static.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Gateway APIs assume IP type as IPv4. Modify it to be generic to allow
clearing of IPv6 gateway set using BIOS.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

ipv4_iface and ipv6_iface fields need to be set to NULL when destroyed.
Before creation these are checked. Use these to report correct states.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Driver takes significant time to load 1m:20s and unload 40s.

Checkpatch script threw warning:
WARNING: msleep < 20ms can sleep for up to 20ms; see
Documentation/timers/timers-howto.txt

To eliminate this warning msleep(1) was replaced with msleep(20) before
submitting.

msleep(20) in init and uninit path for creation and destroying of number
of WRBQs, CQs, and EQs is adding to load/unload time.

Replace msleep with schedule_timeout_uninterruptible of 1ms as its
enough in most cases.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This got unnecessarily introduced with other changes in previous
commits. mcc_lock is taken only in process contexts.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Following configuration is created with what driver exports:
iface.vlan_id = 65535
iface.vlan_priority = 255
iface.vlan_state = <empty>

vlan_state is empty as iscsiadm doesn't process "Disabled".
When applying this configuration, iscsiadm checks for if vlan_state is
"disable" if not it enables with value in vlan_id. 65535 not being valid
value, 0 is applied.

Use "enable" or "disable" for ISCSI_NET_PARAM.
Signed-off-by: NJitendra Bhivare <jitendra.bhivare@broadcom.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Provide a translation table between Ethernet and FC port speeds so odd
speeds (from a Ethernet POV) like 8 Gbit are correctly mapped to sysfs
and open-fcoe's fcoeadm.

Before:
    Description:      BCM57840 NetXtreme II 10/20-Gigabit Ethernet
    Revision:         11
    Manufacturer:     Broadcom Corporation
    Serial Number:    6CC2173EA1D0

    Driver:           bnx2x 1.712.30-0
    Number of Ports:  1

        Symbolic Name:     bnx2fc (QLogic BCM57840) v2.10.3 over eth2
        OS Device Name:    host1
        Node Name:         0x20006cc2173ea1d1
        Port Name:         0x10006cc2173ea1d1
        FabricName:        0x100000c0dd0ce717
        Speed:             unknown
        Supported Speed:   1 Gbit, 10 Gbit
        MaxFrameSize:      2048 bytes
        FC-ID (Port ID):   0x660702
        State:             Online

After:
    Description:      BCM57840 NetXtreme II 10/20-Gigabit Ethernet
    Revision:         11
    Manufacturer:     Broadcom Corporation
    Serial Number:    6CC2173EA1D0

    Driver:           bnx2x 1.712.30-0
    Number of Ports:  1

        Symbolic Name:     bnx2fc (QLogic BCM57840) v2.10.3 over eth2
        OS Device Name:    host1
        Node Name:         0x20006cc2173ea1d1
        Port Name:         0x10006cc2173ea1d1
        FabricName:        0x100000c0dd0ce717
        Speed:             8 Gbit
        Supported Speed:   1 Gbit, 10 Gbit
        MaxFrameSize:      2048 bytes
        FC-ID (Port ID):   0x660701
        State:             Online
Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: NHannes Reinicke <hare@suse.de>
Reviewed-by: NLee Duncan <lduncan@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Update the block library link in the API documentation.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The adapter file descriptor was previously cached within the kernel for
a given context in order to support performing a close on behalf of an
application. This is no longer needed as applications are now required
to perform a close on the adapter file descriptor.
Inspired-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Caching the adapter file descriptor and performing a close on behalf of
an application is a poor design. This is due to the fact that once a
file descriptor in installed, it is free to be altered without the
knowledge of the cxlflash driver. This can lead to inconsistencies
between the application and kernel. Furthermore, the nature of the
former design is more exploitable and thus should be abandoned.

To support applications performing a close on the adapter file that is
associated with a context, a new flag is introduced to the user API to
indicate to applications that they are responsible for the close
following the cleanup (detach) of a context. The documentation is also
updated to reflect this change in behavior.
Inspired-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Currently, context user references are tracked via the list of LUNs that
have attached to the context. While convenient, this is not intuitive
without a deep study of the code and is inconsistent with the existing
reference tracking patterns within the kernel. This design choice can
lead to future bug injection.

To improve code comprehension and better protect against future bugs,
add explicit reference counting to contexts and migrate the context
removal code to the kref release handler.
Inspired-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

The context removal routine requires access to the owning adapter
structure to reset the context within the AFU as part of the tear down
sequence. In order to support kref adoption, the owning adapter must be
accessible from the release handler. As the kref framework only provides
the kref reference as the sole parameter, another means is needed to
derive the owning adapter.

As a remedy, the owning adapter reference is saved off within the
context during initialization.
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

Context information structures are protected by a mutex that is held
when accessing/manipulating the context. When the code that manages
these structures was authored, a decision was made to include taking the
mutex as part of the allocation/initialization sequence and also handle
the scenario where the mutex was already held when freeing the context.

While not a problem outright, this design decision has been deemed as
too flexible and the code should be made more rigid to avoid future
bugs.  In addition, further review of the code yields that the existing
mutex manipulations in both of these context management paths are
superfluous.

This commit removes the obtaining of the context mutex in the context
initialization routine and assumes the mutex is not held in the context
free path.
Inspired-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NMatthew R. Ochs <mrochs@linux.vnet.ibm.com>
Acked-by: NManoj N. Kumar <manoj@linux.vnet.ibm.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When all exchanges are reset the upper layers have already logged out of
the remote port, so the exchanges can be reset without sending any ABTS.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChad Dupuis <chad.dupuis@qlogic.com>
Tested-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

FC-LS mandates that we should invalidate all sequences before sending a
LOGO. And we should set the event to RPORT_EV_STOP when a LOGO request
has been received to signal that all exchanges are terminated.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChad Dupuis <chad.dupuis@qlogic.com>
Tested-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When running in point-to-multipoint mode PLOGI is done after FLOGI
completed. So when the PLOGI fails we should be sending a LOGO to the
remote port.

[mkp: Applied by hand]
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChad Dupuis <chad.dupuis@qlogic.com>
Tested-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

When receiving a PRLO it just means that the operating parameters have
changed, it does _not_ mean that the port doesn't want to communicate
with us.  So instead of implicitly logging out we should be issueing a
PRLI to figure out the new operating parameters.  We can always recover
once PRLI fails.
Signed-off-by: NHannes Reinecke <hare@suse.com>
Reviewed-by: NChad Dupuis <chad.dupuis@qlogic.com>
Tested-by: NChad Dupuis <chad.dupuis@qlogic.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

This was lost with commit 2c55b750
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
but is necessary for problem determination, e.g. to see the
currently active zone set during automatic port scan.

For the large GPN_FT response (4 pages), save space by not dumping
any empty residual entries.
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NAlexey Ishchuk <aishchuk@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

commit 2c55b750
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
started to add FC_CT_HDR_LEN which made zfcp dump random data
out of bounds for RSPN GS responses because u.rspn.rsp
is the largest and last field in the union of struct zfcp_fc_req.
Other request/response types only happened to stay within bounds
due to the padding of the union or
due to the trace capping of u.gspn.rsp to ZFCP_DBF_SAN_MAX_PAYLOAD.

Timestamp      : ...
Area           : SAN
Subarea        : 00
Level          : 1
Exception      : -
CPU id         : ..
Caller         : ...
Record id      : 2
Tag            : fsscth2
Request id     : 0x...
Destination ID : 0x00fffffc
Payload short  : 01000000 fc020000 80020000 00000000
                 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx <===
                 00000000 00000000 00000000 00000000
Payload length : 32                                  <===

struct zfcp_fc_req {
    [0] struct zfcp_fsf_ct_els ct_els;
   [56] struct scatterlist sg_req;
   [96] struct scatterlist sg_rsp;
        union {
            struct {req; rsp;} adisc;    SIZE: 28+28=   56
            struct {req; rsp;} gid_pn;   SIZE: 24+20=   44
            struct {rspsg; req;} gpn_ft; SIZE: 40*4+20=180
            struct {req; rsp;} gspn;     SIZE: 20+273= 293
            struct {req; rsp;} rspn;     SIZE: 277+16= 293
  [136] } u;
}
SIZE: 432
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NAlexey Ishchuk <aishchuk@linux.vnet.ibm.com>
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>

With commit 2c55b750
("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
we lost the N_Port-ID where an ELS response comes from.
With commit 7c7dc196
("[SCSI] zfcp: Simplify handling of ct and els requests")
we lost the N_Port-ID where a CT response comes from.
It's especially useful if the request SAN trace record
with D_ID was already lost due to trace buffer wrap.

GS uses an open WKA port handle and ELS just a D_ID, and
only for ELS we could get D_ID from QTCB bottom via zfcp_fsf_req.
To cover both cases, add a new field to zfcp_fsf_ct_els
and fill it in on request to use in SAN response trace.
Strictly speaking the D_ID on SAN response is the FC frame's S_ID.
We don't need a field for the other end which is always us.
Signed-off-by: NSteffen Maier <maier@linux.vnet.ibm.com>
Fixes: 2c55b750 ("[SCSI] zfcp: Redesign of the debug tracing for SAN records.")
Fixes: 7c7dc196 ("[SCSI] zfcp: Simplify handling of ct and els requests")
Cc: <stable@vger.kernel.org> #2.6.38+
Reviewed-by: NBenjamin Block <bblock@linux.vnet.ibm.com>
Reviewed-by: NHannes Reinecke <hare@suse.com>
Signed-off-by: NMartin K. Petersen <martin.petersen@oracle.com>