- 29 7月, 2015 8 次提交
-
-
由 Michael Ellerman 提交于
SIG_SYS was added in commit a0727e8c "signal, x86: add SIGSYS info and make it synchronous." Because we use the asm-generic struct siginfo, we got support for SIG_SYS for free as part of that commit. However there was no compat handling added for powerpc. That means we've been advertising the existence of signfo._sifields._sigsys to compat tasks, but not actually filling in the fields correctly. Luckily it looks like no one has noticed, presumably because the only user of SIGSYS in the kernel is seccomp filter, which we don't support yet. So before we enable seccomp filter, add compat handling for SIGSYS. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Michael Ellerman 提交于
The documentation for syscall_get_nr() in asm-generic says: Note this returns int even on 64-bit machines. Only 32 bits of system call number can be meaningful. If the actual arch value is 64 bits, this truncates to 32 bits so 0xffffffff means -1. However our implementation was never updated to reflect this. Generally it's not important, but there is once case where it matters. For seccomp filter with SECCOMP_RET_TRACE, the tracer will set regs->gpr[0] to -1 to reject the syscall. When the task is a compat task, this means we end up with 0xffffffff in r0 because ptrace will zero extend the 32-bit value. If syscall_get_nr() returns an unsigned long, then a 64-bit kernel will see a positive value in r0 and will incorrectly allow the syscall through seccomp. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Michael Ellerman 提交于
Currently syscall_get_arguments() is used by syscall tracepoints, and collect_syscall() which is used in some debugging as well as /proc/pid/syscall. The current implementation just copies regs->gpr[3 .. 5] out, which is fine for all the current use cases. When we enable seccomp filter, that will also start using syscall_get_arguments(). However for seccomp filter we want to use r3 as the return value of the syscall, and orig_gpr3 as the first parameter. This will allow seccomp to modify the return value in r3. To support this we need to modify syscall_get_arguments() to return orig_gpr3 instead of r3. This is safe for all uses because orig_gpr3 always contains the r3 value that was passed to the syscall. We store it in the syscall entry path and never modify it. Update syscall_set_arguments() while we're here, even though it's never used. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Michael Ellerman 提交于
Currently syscall_get_arguments() has two loops, one for compat and one for regular tasks. In prepartion for the next patch, which changes which registers we use, switch it to only have one loop, so we only have one place to update. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Michael Ellerman 提交于
Currently the only caller of syscall_set_return_value() is seccomp filter, which is not enabled on powerpc. This means we have not noticed that our implementation of syscall_set_return_value() negates error, even though the value passed in is already negative. So remove the negation in syscall_set_return_value(), and expect the caller to do it like all other implementations do. Also add a comment about the ccr handling. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Michael Ellerman 提交于
syscall_get_error() is unused, and never has been. It's also probably wrong, as it negates r3 before returning it, but that depends on what the caller is expecting. It also doesn't deal with compat, and doesn't deal with TIF_NOERROR. Although we could fix those, until it has a caller and it's clear what semantics the caller wants it's just untested code. So drop it. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Michael Ellerman 提交于
The API for calling do_syscall_trace_enter() is currently sensible enough, it just returns the (modified) syscall number. However once we enable seccomp filter it will get more complicated. When seccomp filter runs, the seccomp kernel code (via SECCOMP_RET_ERRNO), or a ptracer (via SECCOMP_RET_TRACE), may reject the syscall and *may* or may *not* set a return value in r3. That means the assembler that calls do_syscall_trace_enter() can not blindly return ENOSYS, it needs to only return ENOSYS if a return value has not already been set. There is no way to implement that logic with the current API. So change the do_syscall_trace_enter() API to make it deal with the return code juggling, and the assembler can then just return whatever return code it is given. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
由 Michael Ellerman 提交于
Currently on powerpc we have our own #define for the highest (negative) errno value, called _LAST_ERRNO. This is defined to be 516, for reasons which are not clear. The generic code, and x86, use MAX_ERRNO, which is defined to be 4095. In particular seccomp uses MAX_ERRNO to restrict the value that a seccomp filter can return. Currently with the mismatch between _LAST_ERRNO and MAX_ERRNO, a seccomp tracer wanting to return 600, expecting it to be seen as an error, would instead find on powerpc that userspace sees a successful syscall with a return value of 600. To avoid this inconsistency, switch powerpc to use MAX_ERRNO. We are somewhat confident that generic syscalls that can return a non-error value above negative MAX_ERRNO have already been updated to use force_successful_syscall_return(). I have also checked all the powerpc specific syscalls, and believe that none of them expect to return a non-error value between -MAX_ERRNO and -516. So this change should be safe ... Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NKees Cook <keescook@chromium.org>
-
- 27 7月, 2015 1 次提交
-
-
由 Anshuman Khandual 提交于
This patch just changes data type of bhrb_users variable from int to unsigned int because it never contains a negative value. Reported-by: NDaniel Axtens <dja@axtens.net> Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 25 7月, 2015 2 次提交
-
-
由 Sukadev Bhattiprolu 提交于
Simplify code that extracts a 24x7 counter from the HCALL's result buffer. Suggested-by: NJoe Perches <joe@perches.com> Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Sukadev Bhattiprolu 提交于
Fix parameter alignment to be consistent with coding style. Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 23 7月, 2015 3 次提交
-
-
由 Paul Mackerras 提交于
The hardware RNG on POWER8 and POWER7+ can be relatively slow, since it can only supply one 64-bit value per microsecond. Currently we read it in arch_get_random_long(), but that slows down reading from /dev/urandom since the code in random.c calls arch_get_random_long() for every longword read from /dev/urandom. Since the hardware RNG supplies high-quality entropy on every read, it matches the semantics of arch_get_random_seed_long() better than those of arch_get_random_long(). Therefore this commit makes the code use the POWER8/7+ hardware RNG only for arch_get_random_seed_{long,int} and not for arch_get_random_{long,int}. This won't affect any other PowerPC-based platforms because none of them currently support a hardware RNG. To make it clear that the ppc_md function pointer is used for arch_get_random_seed_*, we rename it from get_random_long to get_random_seed. Signed-off-by: NPaul Mackerras <paulus@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Thomas Huth 提交于
The EPOW interrupt handler uses rtas_get_sensor(), which in turn uses rtas_busy_delay() to wait for RTAS becoming ready in case it is necessary. But rtas_busy_delay() is annotated with might_sleep() and thus may not be used by interrupts handlers like the EPOW handler! This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6 Call Trace: [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable) [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180 Fix this issue by introducing a new rtas_get_sensor_fast() function that does not use rtas_busy_delay() - and thus can only be used for sensors that do not cause a BUSY condition - known as "fast" sensors. The EPOW sensor is defined to be "fast" in sPAPR - mpe. Fixes: 587f83e8 ("powerpc/pseries: Use rtas_get_sensor in RAS code") Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NNathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Thomas Huth 提交于
rtas.h already has some nice #defines for RTAS return status codes - let's use them instead of hard-coded "magic" values! Signed-off-by: NThomas Huth <thuth@redhat.com> Reviewed-by: NTyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 21 7月, 2015 3 次提交
-
-
由 Gavin Shan 提交于
When detecting EEH error on non-existing PE, including the reserved one, the PE is simply unfrozen without dumping the PHB diag-data, which is useful for locating the root cause of the EEH error. The patch dumps the PHB diag-data when non-existing PE reports error. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
On LE kernel, the non-existing PE number in BE format derived from skiboot firmware isn't converted to LE format properly as following kernel log indicates: EEH: Clear non-existing PHB#4-PE#200000000000000 Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
This patch adds one helper function 'sigcontext_vmx_regs' which computes quad word aligned pointer for 'vmx_reserve' array element in sigcontext structure making the code more readable. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Reword comment and fix build for CONFIG_ALTIVEC=n] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 16 7月, 2015 5 次提交
-
-
由 Anshuman Khandual 提交于
Commit ce48b210 "powerpc: Add VSX context save/restore, ptrace and signal support" expanded the 'vmx_reserve' array element to contain 101 double words, but the comment block above was not updated. Also reorder the constants in the array size declaration to reflect the logic mentioned in the comment block above. This change helps in explaining how the HW registers are represented in the array. But no functional change. Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> [mpe: Reworded change log and added whitespace around +'s] Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anshuman Khandual 提交于
Currently tm_orig_msr is getting used during process context switch only. Then there is ckpt_regs which saves the checkpointed userspace context The MSR slot contained in ckpt_regs structure can be used during process context switch instead of tm_orig_msr, thus allowing us to drop it from thread_struct structure. This patch does that change. Acked-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NAnshuman Khandual <khandual@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Johannes Thumshirn 提交于
Destroy afu->contexts_idr on release of an afu, reclaiming the allocated memory. Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Johannes Thumshirn 提交于
Destroy cxl_adapter_idr on module exit, reclaiming the allocated memory. This was detected by the following semantic patch (written by Luis Rodriguez <mcgrof@suse.com>) <SmPL> @ defines_module_init @ declarer name module_init, module_exit; declarer name DEFINE_IDR; identifier init; @@ module_init(init); @ defines_module_exit @ identifier exit; @@ module_exit(exit); @ declares_idr depends on defines_module_init && defines_module_exit @ identifier idr; @@ DEFINE_IDR(idr); @ on_exit_calls_destroy depends on declares_idr && defines_module_exit @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... idr_destroy(&idr); ... } @ missing_module_idr_destroy depends on declares_idr && defines_module_exit && !on_exit_calls_destroy @ identifier declares_idr.idr, defines_module_exit.exit; @@ exit(void) { ... +idr_destroy(&idr); } </SmPL> Signed-off-by: NJohannes Thumshirn <jthumshirn@suse.de> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Vipin K Parashar 提交于
This patch adds support for OPAL EPOW (Environmental and Power Warnings) and DPO (Delayed Power Off) events for the PowerNV platform. These events are generated on FSP (Flexible Service Processor) based systems. EPOW events are generated due to various critical system conditions that require system shutdown. A few examples of these conditions are high ambient temperature or system running on UPS power with low UPS battery. DPO event is generated in response to admin initiated system shutdown request. Upon receipt of EPOW and DPO events the host kernel invokes orderly_poweroff() for performing graceful system shutdown. Signed-off-by: NVipin K Parashar <vipin@linux.vnet.ibm.com> Acked-by: NVaibhav Jain <vaibhav@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 13 7月, 2015 18 次提交
-
-
由 Gavin Shan 提交于
When releasing PE for SRIOV VF, the PE is forced to be frozen wrongly. When the same PE is picked for another VF, it won't work anyhow. The patch fixes the issue by unfreezing, not freezing the VF PE when releasing it. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
The PELTV of PF PE should include VF PE, which is missed by current code, so that the VF PE is frozen automatically when freezing PF PE. The patch fixes the PELTV of PF PE to include VF PE. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
On PHB3, PE might be reserved in advance to reflect the M64 segments consumed by the PE according to M64 BARs (exclude VF BARs) of the PCI devices included in the PE. The PE is picked based on M64 BARs instead of the bridge's M64 windows, which might include VF BARs. Otherwise, wrong PE could be picked. The patch calculates the used M64 segments and PE numbers according to the M64 BARs, excluding VF BARs, of PCI devices in one particular PE, instead of the bridge's M64 windows. Then the right PE number is picked. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
The patch changes the type of last argument of pnv_ioda_setup_bus_PE() and phb::pick_m64_pe() to boolean. No functional change. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
On PHB3, some PEs might be reserved in advance to reflect the M64 segments consumed by those PEs. We're reserving PEs based on the M64 window of root port, which might contain VF BAR. The PEs for VFs are allocated dynamically, not reserved based on the consumed M64 segments. So the M64 window of root port isn't reliable for the task. Instead, we go through M64 BARs (VF BARs excluded) of PCI devices under the specified root bus and reserve PEs accordingly, as the patch does. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Gavin Shan 提交于
The PE numbers are reserved according to root port's M64 window, which is aligned to M64 segment finely. So one PE shouldn't be reserved for multiple times. We will reserve PE numbers according to the M64 BARs of PCI device in subsequent patches, which aren't aligned to M64 segment size finely. It means one particular PE could be reserved for multiple times. The patch allows one PE to be reserved for multiple times and we print the warning message at debugging level. Signed-off-by: NGavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Anton Blanchard 提交于
mtmsr() does the right thing on 32bit and 64bit, so use it everywhere. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
The encoding of the lengths in the ibm_architecture_vec array is "interesting" to say the least. It's non-obvious how the number of bytes we provide relates to the length value. In fact we already got it wrong once, see 11e9ed43 "Fix up ibm_architecture_vec definition". So add some macros to make it (hopefully) clearer. These at least have the property that the integer present in the code is equal to the number of bytes that follows it. Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Reviewed-by: NStewart Smith <stewart@linux.vnet.ibm.com>
-
由 Benjamin Herrenschmidt 提交于
This patch adds the ability to the DMA direct ops to fallback to the IOMMU ops for coherent alloc/free if the coherent mask of the device isn't suitable for accessing the direct DMA space and the device also happens to have an active IOMMU table. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
Now that the table and the offset can co-exist, we no longer need to flip/flop, we can just establish both once at boot time. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Benjamin Herrenschmidt 提交于
To support "hybrid" DMA ops in a subsequent patch, we will need both a direct DMA offset and an iommu pointer. Those are currently exclusive (a union), so change them to be separate fields. While there, also type iommu_table_base properly and make exist only on CONFIG_PPC64 since it's not referenced on 32-bit at all. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Rasmus Villemoes 提交于
A precision of 16 (%.16llx) has the same effect as a field width of 16 along with passing the 0 flag (%016llx), but the latter is much more common in the kernel tree. Update cxl to use that. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Rasmus Villemoes 提交于
C99 says that a precision given as simply '.' with no following digits or * should be interpreted as 0. The kernel's printf implementation, however, treats this case as if the precision was omitted. C99 also says that if both the precision and value are 0, no digits should be printed. Even if the kernel followed C99 to the letter, I don't think that would be particularly useful in these cases. For consistency with most other format strings in the file, use an explicit precision of 16 and add a 0x prefix. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
This reverts commit dec4f799. Jörg Otte reports a NULL pointder dereference due to this commit, as 'crtc_state' very much can be NULL: crtc_state = state->base.state ? intel_atomic_get_crtc_state(state->base.state, intel_crtc) : NULL; So the change to test 'crtc_state->base.active' cannot possibly be correct as-is. There may be some other minimal fix (like just checking crtc_state for NULL), but I'm just reverting it now for the rc2 release, and people like Daniel Vetter who actually know this code will figure out what the right solution is in the longer term. Reported-and-bisected-by: NJörg Otte <jrg.otte@gmail.com> Cc: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> CC: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs由 Linus Torvalds 提交于
Pull VFS fixes from Al Viro: "Fixes for this cycle regression in overlayfs and a couple of long-standing (== all the way back to 2.6.12, at least) bugs" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: freeing unlinked file indefinitely delayed fix a braino in ovl_d_select_inode() 9p: don't leave a half-initialized inode sitting around
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linus由 Linus Torvalds 提交于
Pull MIPS fixes from Ralf Baechle: "A fair number of 4.2 fixes also because Markos opened the flood gates. - Patch up the math used calculate the location for the page bitmap. - The FDC (Not what you think, FDC stands for Fast Debug Channel) IRQ around was causing issues on non-Malta platforms, so move the code to a Malta specific location. - A spelling fix replicated through several files. - Fix to the emulation of an R2 instruction for R6 cores. - Fix the JR emulation for R6. - Further patching of mindless 64 bit issues. - Ensure the kernel won't crash on CPUs with L2 caches with >= 8 ways. - Use compat_sys_getsockopt for O32 ABI on 64 bit kernels. - Fix cache flushing for multithreaded cores. - A build fix" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: O32: Use compat_sys_getsockopt. MIPS: c-r4k: Extend way_string array MIPS: Pistachio: Support CDMM & Fast Debug Channel MIPS: Malta: Make GIC FDC IRQ workaround Malta specific MIPS: c-r4k: Fix cache flushing for MT cores Revert "MIPS: Kconfig: Disable SMP/CPS for 64-bit" MIPS: cps-vec: Use macros for various arithmetics and memory operations MIPS: kernel: cps-vec: Replace KSEG0 with CKSEG0 MIPS: kernel: cps-vec: Use ta0-ta3 pseudo-registers for 64-bit MIPS: kernel: cps-vec: Replace mips32r2 ISA level with mips64r2 MIPS: kernel: cps-vec: Replace 'la' macro with PTR_LA MIPS: kernel: smp-cps: Fix 64-bit compatibility errors due to pointer casting MIPS: Fix erroneous JR emulation for MIPS R6 MIPS: Fix branch emulation for BLTC and BGEC instructions MIPS: kernel: traps: Fix broken indentation MIPS: bootmem: Don't use memory holes for page bitmap MIPS: O32: Do not handle require 32 bytes from the stack to be readable. MIPS, CPUFREQ: Fix spelling of Institute. MIPS: Lemote 2F: Fix build caused by recent mass rename.
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip由 Linus Torvalds 提交于
Pull x86 fixes from Thomas Gleixner: - the high latency PIT detection fix, which slipped through the cracks for rc1 - a regression fix for the early printk mechanism - the x86 part to plug irq/vector related hotplug races - move the allocation of the espfix pages on cpu hotplug to non atomic context. The current code triggers a might_sleep() warning. - a series of KASAN fixes addressing boot crashes and usability - a trivial typo fix for Kconfig help text * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/kconfig: Fix typo in the CONFIG_CMDLINE_BOOL help text x86/irq: Retrieve irq data after locking irq_desc x86/irq: Use proper locking in check_irq_vectors_for_cpu_disable() x86/irq: Plug irq vector hotplug race x86/earlyprintk: Allow early_printk() to use console style parameters like '115200n8' x86/espfix: Init espfix on the boot CPU side x86/espfix: Add 'cpu' parameter to init_espfix_ap() x86/kasan: Move KASAN_SHADOW_OFFSET to the arch Kconfig x86/kasan: Add message about KASAN being initialized x86/kasan: Fix boot crash on AMD processors x86/kasan: Flush TLBs after switching CR3 x86/kasan: Fix KASAN shadow region page tables x86/init: Clear 'init_level4_pgt' earlier x86/tsc: Let high latency PIT fail fast in quick_pit_calibrate()
-