This removes more dead code that was somehow missed by commit 0d99519e
(writeback: remove unused nonblocking and congestion checks).  There are
no behavior change except for the removal of two entries from one of the
ext4 tracing interface.

The nonblocking checks in ->writepages are no longer used because the
flusher now prefer to block on get_request_wait() than to skip inodes on
IO congestion.  The latter will lead to more seeky IO.

The nonblocking checks in ->writepage are no longer used because it's
redundant with the WB_SYNC_NONE check.

We no long set ->nonblocking in VM page out and page migration, because
a) it's effectively redundant with WB_SYNC_NONE in current code
b) it's old semantic of "Don't get stuck on request queues" is mis-behavior:
   that would skip some dirty inodes on congestion and page out others, which
   is unfair in terms of LRU age.

Inspired by Christoph Hellwig. Thanks!
Signed-off-by: NWu Fengguang <fengguang.wu@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: David Howells <dhowells@redhat.com>
Cc: Sage Weil <sage@newdream.net>
Cc: Steve French <sfrench@samba.org>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The locking order in oom_adjust_write() and oom_score_adj_write() for
task->alloc_lock and task->sighand->siglock is reversed, and lockdep
notices that irqs could encounter an ABBA scenario.

This fixes the locking order so that we always take task_lock(task) prior
to lock_task_sighand(task).
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Reported-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's better to use proper error handling in oom_adjust_write() and
oom_score_adj_write() instead of duplicating the locking order on various
exit paths.
Suggested-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's necessary to kill all threads that share an oom killed task's mm if
the goal is to lead to future memory freeing.

This patch reintroduces the code removed in 8c5cd6f3 (oom: oom_kill
doesn't kill vfork parent (or child)) since it is obsoleted.

It's now guaranteed that any task passed to oom_kill_task() does not share
an mm with any thread that is unkillable.  Thus, we're safe to issue a
SIGKILL to any thread sharing the same mm.

This is especially necessary to solve an mm->mmap_sem livelock issue
whereas an oom killed thread must acquire the lock in the exit path while
another thread is holding it in the page allocator while trying to
allocate memory itself (and will preempt the oom killer since a task was
already killed).  Since tasks with pending fatal signals are now granted
access to memory reserves, the thread holding the lock may quickly
allocate and release the lock so that the oom killed task may exit.

This mainly is for threads that are cloned with CLONE_VM but not
CLONE_THREAD, so they are in a different thread group.  Non-NPTL threads
exist in the wild and this change is necessary to prevent the livelock in
such cases.  We care more about preventing the livelock than incurring the
additional tasklist in the oom killer when a task has been killed.
Systems that are sufficiently large to not want the tasklist scan in the
oom killer in the first place already have the option of enabling
/proc/sys/vm/oom_kill_allocating_task, which was designed specifically for
that purpose.

This code had existed in the oom killer for over eight years dating back
to the 2.4 kernel.

[akpm@linux-foundation.org: add nice comment]
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Acked-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The oom killer's goal is to kill a memory-hogging task so that it may
exit, free its memory, and allow the current context to allocate the
memory that triggered it in the first place.  Thus, killing a task is
pointless if other threads sharing its mm cannot be killed because of its
/proc/pid/oom_adj or /proc/pid/oom_score_adj value.

This patch checks whether any other thread sharing p->mm has an
oom_score_adj of OOM_SCORE_ADJ_MIN.  If so, the thread cannot be killed
and oom_badness(p) returns 0, meaning it's unkillable.
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Ying Han <yinghan@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

It's pointless to kill a task if another thread sharing its mm cannot be
killed to allow future memory freeing.  A subsequent patch will prevent
kills in such cases, but first it's necessary to have a way to flag a task
that shares memory with an OOM_DISABLE task that doesn't incur an
additional tasklist scan, which would make select_bad_process() an O(n^2)
function.

This patch adds an atomic counter to struct mm_struct that follows how
many threads attached to it have an oom_score_adj of OOM_SCORE_ADJ_MIN.
They cannot be killed by the kernel, so their memory cannot be freed in
oom conditions.

This only requires task_lock() on the task that we're operating on, it
does not require mm->mmap_sem since task_lock() pins the mm and the
operation is atomic.

[rientjes@google.com: changelog and sys_unshare() code]
[rientjes@google.com: protect oom_disable_count with task_lock in fork]
[rientjes@google.com: use old_mm for oom_disable_count in exec]
Signed-off-by: NYing Han <yinghan@google.com>
Signed-off-by: NDavid Rientjes <rientjes@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NMatt Mackall <mpm@selenic.com>
Cc: Nikanth Karthikesan <knikanth@suse.de>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

We use vmcore in our production kernel for a long time, it is pretty
stable now.  So I don't think we need to mark it as experimental any more.
Signed-off-by: NWANG Cong <xiyou.wangcong@gmail.com>
Acked-by: NNeil Horman <nhorman@tuxdriver.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit df9ee292 ("Fix IRQ flag handling naming") changed the IRQ flag
handling naming scheme and broke UML:

In file included from arch/um/include/asm/fixmap.h:5,
                 from arch/um/include/shared/um_uaccess.h:10,
                 from arch/um/include/asm/uaccess.h:41,
                 from arch/um/include/asm/thread_info.h:13,
                 from include/linux/thread_info.h:56,
                 from include/linux/preempt.h:9,
                 from include/linux/spinlock.h:50,
                 from include/linux/seqlock.h:29,
                 from include/linux/time.h:8,
                 from include/linux/stat.h:60,
                 from include/linux/module.h:10,
                 from init/main.c:13:
arch/um/include/asm/system.h:11:1: warning: "local_save_flags" redefined

This patch brings the new scheme to UML and makes it work again.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NDavid Howells <dhowells@redhat.com>
Cc: Jeff Dike <jdike@addtoit.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

WARNING: at lib/list_debug.c:26 __list_add+0x3f/0x81()
Hardware name: Express5800/B120a [N8400-085]
list_add corruption. next->prev should be prev (ffffffff81a7ea00), but was dead000000200200. (next=ffff88080b872d58).
Modules linked in: aoe ipt_MASQUERADE iptable_nat nf_nat autofs4 sunrpc bridge 8021q garp stp llc ipv6 cpufreq_ondemand acpi_cpufreq freq_table dm_round_robin dm_multipath kvm_intel kvm uinput lpfc scsi_transport_fc igb ioatdma scsi_tgt i2c_i801 i2c_core dca iTCO_wdt iTCO_vendor_support pcspkr shpchp megaraid_sas [last unloaded: aoe]
Pid: 54, comm: events/3 Tainted: G        W  2.6.34-vanilla1 #1
Call Trace:
[<ffffffff8104bd77>] warn_slowpath_common+0x7c/0x94
[<ffffffff8104bde6>] warn_slowpath_fmt+0x41/0x43
[<ffffffff8120fd2e>] __list_add+0x3f/0x81
[<ffffffff81212a12>] __percpu_counter_init+0x59/0x6b
[<ffffffff810d8499>] bdi_init+0x118/0x17e
[<ffffffff811f2c50>] blk_alloc_queue_node+0x79/0x143
[<ffffffff811f2d2b>] blk_alloc_queue+0x11/0x13
[<ffffffffa02a931d>] aoeblk_gdalloc+0x8e/0x1c9 [aoe]
[<ffffffffa02aa655>] aoecmd_sleepwork+0x25/0xa8 [aoe]
[<ffffffff8106186c>] worker_thread+0x1a9/0x237
[<ffffffffa02aa630>] ? aoecmd_sleepwork+0x0/0xa8 [aoe]
[<ffffffff81065827>] ? autoremove_wake_function+0x0/0x39
[<ffffffff810616c3>] ? worker_thread+0x0/0x237
[<ffffffff810653ad>] kthread+0x7f/0x87
[<ffffffff8100aa24>] kernel_thread_helper+0x4/0x10
[<ffffffff8106532e>] ? kthread+0x0/0x87
[<ffffffff8100aa20>] ? kernel_thread_helper+0x0/0x10

It's because there is no initialization code for a list_head contained in
the struct backing_dev_info under CONFIG_HOTPLUG_CPU, and the bug comes up
when block device drivers calling blk_alloc_queue() are used.  In case of
me, I got them by using aoe.
Signed-off-by: NMasanori Itoh <itoumsn@nttdata.co.jp>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This helper is wrong: it coerces signed values into unsigned ones, so code
such as

	if (kfifo_alloc(...) < 0) {
		error
	}

will fail to detect the error.

So let's disable __kfifo_must_check_helper() for 2.6.36.

Cc: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Stefani Seibold <stefani@seibold.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

365b1818 ("add f_flags to struct statfs(64)") resized f_spare within
struct statfs which caused a UML crash.  There is no need to copy f_spare.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Reported-by: NToralf Förster <toralf.foerster@gmx.de>
Tested-by: NToralf Förster <toralf.foerster@gmx.de>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Unloading ipmi module can trigger following error.  (if
CONFIG_DEBUG_SPINLOCK=y)

[ 9633.779590] BUG: spinlock bad magic on CPU#1, rmmod/7170
[ 9633.779606]  lock: f41f5414, .magic: 00000000, .owner:
<none>/-1, .owner_cpu: 0
[ 9633.779626] Pid: 7170, comm: rmmod Not tainted
2.6.36-rc7-11474-gb71eb1e-dirty #328
[ 9633.779644] Call Trace:
[ 9633.779657]  [<c13921cc>] ? printk+0x18/0x1c
[ 9633.779672]  [<c11a1f33>] spin_bug+0xa3/0xf0
[ 9633.779685]  [<c11a1ffd>] do_raw_spin_lock+0x7d/0x160
[ 9633.779702]  [<c1131537>] ? release_sysfs_dirent+0x47/0xb0
[ 9633.779718]  [<c1131b78>] ? sysfs_addrm_finish+0xa8/0xd0
[ 9633.779734]  [<c1394bac>] _raw_spin_lock_irqsave+0xc/0x20
[ 9633.779752]  [<f99d93da>] cleanup_one_si+0x6a/0x200 [ipmi_si]
[ 9633.779768]  [<c11305b2>] ? sysfs_hash_and_remove+0x72/0x80
[ 9633.779786]  [<f99dcf26>] ipmi_pnp_remove+0xd/0xf [ipmi_si]
[ 9633.779802]  [<c11f622b>] pnp_device_remove+0x1b/0x40

Fix this by initializing spinlocks in a smi_info_alloc() helper function,
right after memory allocation and clearing.
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Acked-by: NDavid Miller <davem@davemloft.net>
Cc: Yinghai Lu <yinghai@kernel.org>
Acked-by: NCorey Minyard <cminyard@mvista.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This is a bug fix.  Some SPI connected devices using 16/24 bit accesses,
previously failed, now work.

This typo slipped in after testing, during some restructuring.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Cc: Mike Frysinger <vapier@gentoo.org>
Cc: Chris Verges <chrisv@cyberswitching.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The linker script cleanup that I did in commit 5d150a97 ("um: Clean up
linker script using standard macros.") (2.6.32) accidentally introduced an
ALIGN(PAGE_SIZE) when converting to use INIT_TEXT_SECTION; Richard
Weinberger reported that this causes the kernel to segfault with
CONFIG_STATIC_LINK=y.

I'm not certain why this extra alignment is a problem, but it seems likely
it is because previously

__init_begin = _stext = _text = _sinittext

and with the extra ALIGN(PAGE_SIZE), _sinittext becomes different from the
rest.  So there is likely a bug here where something is assuming that
_sinittext is the same as one of those other symbols.  But reverting the
accidental change fixes the regression, so it seems worth committing that
now.
Signed-off-by: NTim Abbott <tabbott@ksplice.com>
Reported-by: NRichard Weinberger <richard@nod.at>
Cc: Jeff Dike <jdike@addtoit.com>
Tested by: Antoine Martin <antoine@nagafix.co.uk>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

sgi-xp: incoming XPC channel messages can come in after the channel's partition structures have been torn down

Under some workloads, some channel messages have been observed being
delayed on the sending side past the point where the receiving side has
been able to tear down its partition structures.

This condition is already detected in xpc_handle_activate_IRQ_uv(), but
that information is not given to xpc_handle_activate_mq_msg_uv().  As a
result, xpc_handle_activate_mq_msg_uv() assumes the structures still exist
and references them, causing a NULL-pointer deref.
Signed-off-by: NRobin Holt <holt@sgi.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This fixes a issue which was introduced by fe2cc53e ("uml: track and make
up lost ticks").

timeval_to_ns() returns long long and not int.  Due to that UML's timer
did not work properlt and caused timer freezes.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Acked-by: NPekka Enberg <penberg@kernel.org>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

There is a bug in commit 6dda9d55 ("page allocator: reduce fragmentation
in buddy allocator by adding buddies that are merging to the tail of the
free lists") that means a buddy at order MAX_ORDER is checked for merging.
 A page of this order never exists so at times, an effectively random
piece of memory is being checked.

Alan Curry has reported that this is causing memory corruption in
userspace data on a PPC32 platform (http://lkml.org/lkml/2010/10/9/32).
It is not clear why this is happening.  It could be a cache coherency
problem where pages mapped in both user and kernel space are getting
different cache lines due to the bad read from kernel space
(http://lkml.org/lkml/2010/10/13/179).  It could also be that there are
some special registers being io-remapped at the end of the memmap array
and that a read has special meaning on them.  Compiler bugs have been
ruled out because the assembly before and after the patch looks relatively
harmless.

This patch fixes the problem by ensuring we are not reading a possibly
invalid location of memory.  It's not clear why the read causes corruption
but one way or the other it is a buggy read.
Signed-off-by: NMel Gorman <mel@csn.ul.ie>
Cc: Corrado Zoccolo <czoccolo@gmail.com>
Reported-by: NAlan Curry <pacman@kosh.dhis.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

This comment landed in the wrong place.

Cc: Andi Kleen <andi@firstfloor.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Paris <eparis@redhat.com>
Cc: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

scan_lru_pages returns pfn. So, it's type should be "unsigned long"
not "int".

Note: I guess this has been work until now because memory hotplug tester's
      machine has not very big memory....
      physical address < 32bit << PAGE_SHIFT.
Reported-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: NKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: NKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* git://git.infradead.org/battery-2.6:
  power_supply: Makefile cleanup
  bq27x00_battery: Add missing kfree(di->bus) in bq27x00_battery_remove()
  power_supply: Introduce maximum current property
  power_supply: Add types for USB chargers
  ds2782_battery: Fix units
  power_supply: Add driver for TWL4030/TPS65950 BCI charger
  bq20z75: Add support for more power supply properties
  wm831x_power: Add missing kfree(wm831x_power) in wm831x_power_remove()
  jz4740-battery: Add missing kfree(jz_battery) in jz_battery_remove()
  ds2760_battery: Add missing kfree(di) in ds2760_battery_remove()
  olpc_battery: Fix endian neutral breakage for s16 values
  ds2760_battery: Fix W1 and W1_SLAVE_DS2760 dependency
  pcf50633-charger: Add missing sysfs_remove_group()
  power_supply: Add driver for TI BQ20Z75 gas gauge IC
  wm831x_power: Remove duplicate chg mask
  omap: rx51: Add support for USB chargers
  power_supply: Add isp1704 charger detection driver

* 'linux_next' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/i7core: (34 commits)
  i7core_edac: return -ENODEV when devices were already probed
  i7core_edac: properly terminate pci_dev_table
  i7core_edac: Avoid PCI refcount to reach zero on successive load/reload
  i7core_edac: Fix refcount error at PCI devices
  i7core_edac: it is safe to i7core_unregister_mci() when mci=NULL
  i7core_edac: Fix an oops at i7core probe
  i7core_edac: Remove unused member channels in i7core_pvt
  i7core_edac: Remove unused arg csrow from get_dimm_config
  i7core_edac: Reduce args of i7core_register_mci
  i7core_edac: Introduce i7core_unregister_mci
  i7core_edac: Use saved pointers
  i7core_edac: Check probe counter in i7core_remove
  i7core_edac: Call pci_dev_put() when alloc_i7core_dev()  failed
  i7core_edac: Fix error path of i7core_register_mci
  i7core_edac: Fix order of lines in i7core_register_mci
  i7core_edac: Always do get/put for all devices
  i7core_edac: Introduce i7core_pci_ctl_create/release
  i7core_edac: Introduce free_i7core_dev
  i7core_edac: Introduce alloc_i7core_dev
  i7core_edac: Reduce args of i7core_get_onedevice
  ...

* 'hwpoison' of git://git.kernel.org/pub/scm/linux/kernel/git/ak/linux-mce-2.6: (22 commits)
  Add _addr_lsb field to ia64 siginfo
  Fix migration.c compilation on s390
  HWPOISON: Remove retry loop for try_to_unmap
  HWPOISON: Turn addr_valid from bitfield into char
  HWPOISON: Disable DEBUG by default
  HWPOISON: Convert pr_debugs to pr_info
  HWPOISON: Improve comments in memory-failure.c
  x86: HWPOISON: Report correct address granuality for huge hwpoison faults
  Encode huge page size for VM_FAULT_HWPOISON errors
  Fix build error with !CONFIG_MIGRATION
  hugepage: move is_hugepage_on_freelist inside ifdef to avoid warning
  Clean up __page_set_anon_rmap
  HWPOISON, hugetlb: fix unpoison for hugepage
  HWPOISON, hugetlb: soft offlining for hugepage
  HWPOSION, hugetlb: recover from free hugepage error when !MF_COUNT_INCREASED
  hugetlb: move refcounting in hugepage allocation inside hugetlb_lock
  HWPOISON, hugetlb: add free check to dequeue_hwpoison_huge_page()
  hugetlb: hugepage migration core
  hugetlb: redefine hugepage copy functions
  hugetlb: add allocate function for hugepage migration
  ...

* 'for_linus' of git://github.com/at91linux/linux-2.6-at91:
  AT91: rtc: enable built-in RTC in Kconfig for at91sam9g45 family
  at91/atmel-mci: inclusion of sd/mmc driver in at91sam9g45 chip and board
  AT91: pm: make sure that r0 is 0 when dealing with cache operations
  AT91: pm: use plain cpu_do_idle() for "wait for interrupt"
  AT91: reset: extend alternate reset procedure to several chips
  AT91: reset routine cleanup, remove not needed icache flush
  AT91: trivial: align comment of at91sam9g20_reset with one more tab
  AT91: Fix AT91SAM9G20 reset as per the errata in the data sheet
  AT91: add board support for Pcontrol_G20

* 'for-linus' of git://gitorious.org/linux-omap-dss2/linux:
  OMAP: DSS2: don't power off a panel twice
  OMAP: DSS2: OMAPFB: Allow usage of def_vrfb only for omap2,3
  OMAP: DSS2: OMAPFB: make VRFB depends on OMAP2,3
  OMAP: DSS2: OMAPFB: Allow FB_OMAP2 to build without VRFB
  arm/omap: simplify conditional
  OMAP: DSS2: DSI: Remove extra iounmap in error path
  OMAP: DSS2: Use dss_features framework on DSS2 code
  OMAP: DSS2: Introduce dss_features files
  video/omap: remove mux.h include
  ARM: omap/fb: move get_fbmem_region() to .init.text
  ARM: omap/fb: move omapfb_reserve_sram to .init.text
  ARM: omap/fb: move omap_init_fb to .init.text
  OMAP: DSS2: OMAPFB: swap front and back porches for both hsync and vsync
  OMAP: DSS2: make filter coefficient tables human readable
  OMAP: DSS2: Add SPI dependency to Kconfig of ACX565AKM panel

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ]: x86, cpufreq: Mark longrun_get_policy with __cpuinit.
  [CPUFREQ] add sampling_down_factor tunable to improve ondemand performance
  [CPUFREQ] arch/x86/kernel/cpu/cpufreq: Fix unsigned return type
  [CPUFREQ] drivers/cpufreq: Adjust confusing if indentation

* 'for-2.6.37' of git://linux-nfs.org/~bfields/linux: (99 commits)
  svcrpc: svc_tcp_sendto XPT_DEAD check is redundant
  svcrpc: no need for XPT_DEAD check in svc_xprt_enqueue
  svcrpc: assume svc_delete_xprt() called only once
  svcrpc: never clear XPT_BUSY on dead xprt
  nfsd4: fix connection allocation in sequence()
  nfsd4: only require krb5 principal for NFSv4.0 callbacks
  nfsd4: move minorversion to client
  nfsd4: delay session removal till free_client
  nfsd4: separate callback change and callback probe
  nfsd4: callback program number is per-session
  nfsd4: track backchannel connections
  nfsd4: confirm only on succesful create_session
  nfsd4: make backchannel sequence number per-session
  nfsd4: use client pointer to backchannel session
  nfsd4: move callback setup into session init code
  nfsd4: don't cache seq_misordered replies
  SUNRPC: Properly initialize sock_xprt.srcaddr in all cases
  SUNRPC: Use conventional switch statement when reclassifying sockets
  sunrpc/xprtrdma: clean up workqueue usage
  sunrpc: Turn list_for_each-s into the ..._entry-s
  ...

Fix up trivial conflicts (two different deprecation notices added in
separate branches) in Documentation/feature-removal-schedule.txt

* 'nfs-for-2.6.37' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  net/sunrpc: Use static const char arrays
  nfs4: fix channel attribute sanity-checks
  NFSv4.1: Use more sensible names for 'initialize_mountpoint'
  NFSv4.1: pnfs: filelayout: add driver's LAYOUTGET and GETDEVICEINFO infrastructure
  NFSv4.1: pnfs: add LAYOUTGET and GETDEVICEINFO infrastructure
  NFS: client needs to maintain list of inodes with active layouts
  NFS: create and destroy inode's layout cache
  NFSv4.1: pnfs: filelayout: introduce minimal file layout driver
  NFSv4.1: pnfs: full mount/umount infrastructure
  NFS: set layout driver
  NFS: ask for layouttypes during v4 fsinfo call
  NFS: change stateid to be a union
  NFSv4.1: pnfsd, pnfs: protocol level pnfs constants
  SUNRPC: define xdr_decode_opaque_fixed
  NFSD: remove duplicate NFS4_STATEID_SIZE

Enable built-in RTC IP in Kconfig and modify comments and help messages.
RTT as RTC is still available but should not be selected in common case.
Reported-by: NYegor Yefremov <yegor_sub1@visionsystems.de>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

This adds the support of atmel-mci sd/mmc driver in at91sam9g45 devices and
board files. This also configures the DMA controller slave interface for
at_hdmac dmaengine driver.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

When using CP15 cache operations (c7), we make sure that Rd (r0)
is actually 0 as ARM 926 TRM is saying.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

For power management at91_pm_enter() routine, use the cpu_do_idle() for a
rock solid "wait for interrupt" implementation.
For AT91SAM9 ARM 926 based chips, we can exceed the cache line length as
we can access RAM even while in self-refresh mode.
We keep plain access to CP15 for at91rm9200 as this feature is not
available: instructions have to be in a single cache line.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Several at91sam9 chips need the alternate reset procedure to be sure to halt
SDRAM smoothly before resetting the chip.
This is an extension of previous patch "Fix AT91SAM9G20 reset" to all chips
affected.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Generalize assembler reset routine to allow use on several at91sam9 chips.
This patch replace double definitions of SDRAM controller registers and RSTC
registers with use of classical header files.

For this rework, we remove the not needed icache flush as it is already
done in the calling function: arm_machine_restart().

Rename at91sam9g20_reset.S to generalize to several chips.
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Preparing next patch with longer names
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

If the SDRAM is not cleanly shutdown before reset it can be left driving
the bus, which then stops the bootloader booting from NAND.
Signed-off-by: NPeter Horton <phorton@bitbox.co.uk>
[nicolas.ferre@atmel.com: change file header line order]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Board is a carrier board for Stamp9G20, with additional peripherals
for a building automation system
Signed-off-by: NPeter Gsellmann <pgsellmann@portner-elektronik.at>
[nicolas.ferre@atmel.com: remove machine_desc.io_pg_offst and .phys_io]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

The sanity checks here are incorrect; in the worst case they allow
values that crash the client.

They're also over-reliant on the preprocessor.
Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>

* 'for-next' of git://android.git.kernel.org/kernel/tegra:
  spi: tegra: fix error setting on timeout
  spi: add spi_tegra driver
  tegra: harmony: enable PCI Express
  tegra: add PCI Express support
  tegra: add PCI Express clocks
  [ARM] tegra: Add APB DMA support
  [ARM] tegra: Add cpufreq support
  [ARM] tegra: common: Update common clock init table
  [ARM] tegra: clock: Add dvfs support, bug fixes, and cleanups
  [ARM] tegra: Add support for reading fuses
  [ARM] tegra: gpio: Add suspend and wake support
  [ARM] tegra: pinmux: add safe values, move tegra2, add suspend
  [ARM] tegra: add suspend and mirror irqs to legacy controller
  [ARM] tegra: Add legacy irq support
  [ARM] tegra: update iomap