- 17 9月, 2015 1 次提交
-
-
由 Loic Poulain 提交于
Add specific bluetooth device logging macros since hci device name is repeatedly referred in bluetooth subsystem logs. Signed-off-by: NLoic Poulain <loic.poulain@intel.com> Signed-off-by: NMarcel Holtmann <marcel@holtmann.org>
-
- 16 9月, 2015 2 次提交
-
-
由 Sowmini Varadhan 提交于
Many commonly used functions like getifaddrs() invoke RTM_GETLINK to dump the interface information, and do not need the the AF_INET6 statististics that are always returned by default from rtnl_fill_ifinfo(). Computing the statistics can be an expensive operation that impacts scaling, so it is desirable to avoid this if the information is not needed. This patch adds a the RTEXT_FILTER_SKIP_STATS extended info flag that can be passed with netlink_request() to avoid statistics computation for the ifinfo path. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Add the FIB table id to rtable to make the information available for IPv4 as it is for IPv6. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 9月, 2015 1 次提交
-
-
由 Phil Sutter 提交于
This switches IPv6 policy routing to use the shared fib_default_rule_pref() function of IPv4 and DECnet. It is also used in multicast routing for IPv4 as well as IPv6. The motivation for this patch is a complaint about iproute2 behaving inconsistent between IPv4 and IPv6 when adding policy rules: Formerly, IPv6 rules were assigned a fixed priority of 0x3FFF whereas for IPv4 the assigned priority value was decreased with each rule added. Since then all users of the default_pref field have been converted to assign the generic function fib_default_rule_pref(), fib_nl_newrule() may just use it directly instead. Therefore get rid of the function pointer altogether and make fib_default_rule_pref() static, as it's not used outside fib_rules.c anymore. Signed-off-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 09 9月, 2015 2 次提交
-
-
由 Michal Hocko 提交于
The only user is sock_update_memcg which is living in memcontrol.c so it doesn't make much sense to pollute sock.h by this inline helper. Move it to memcontrol.c and open code it into its only caller. Signed-off-by: NMichal Hocko <mhocko@suse.com> Cc: Vladimir Davydov <vdavydov@parallels.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Michal Hocko 提交于
mem_cgroup structure is defined in mm/memcontrol.c currently which means that the code outside of this file has to use external API even for trivial access stuff. This patch exports mm_struct with its dependencies and makes some of the exported functions inlines. This even helps to reduce the code size a bit (make defconfig + CONFIG_MEMCG=y) text data bss dec hex filename 12355346 1823792 1089536 15268674 e8fb42 vmlinux.before 12354970 1823792 1089536 15268298 e8f9ca vmlinux.after This is not much (370B) but better than nothing. We also save a function call in some hot paths like callers of mem_cgroup_count_vm_event which is used for accounting. The patch doesn't introduce any functional changes. [vdavykov@parallels.com: inline memcg_kmem_is_active] [vdavykov@parallels.com: do not expose type outside of CONFIG_MEMCG] [akpm@linux-foundation.org: memcontrol.h needs eventfd.h for eventfd_ctx] [akpm@linux-foundation.org: export mem_cgroup_from_task() to modules] Signed-off-by: NMichal Hocko <mhocko@suse.cz> Reviewed-by: NVladimir Davydov <vdavydov@parallels.com> Suggested-by: NJohannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 04 9月, 2015 1 次提交
-
-
由 Avri Altman 提交于
HT TDLS traffic should be protected in a non-HT BSS to avoid collisions. Therefore, when TDLS peers join/leave, check if protection is (now) needed and set the ht_operation_mode of the virtual interface according to the HT capabilities of the TDLS peer(s). This works because a non-HT BSS connection never sets (or otherwise uses) the ht_operation_mode; it just means that drivers must be aware that this field applies to all HT traffic for this virtual interface, not just the traffic within the BSS. Document that. Signed-off-by: NAvri Altman <avri.altman@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com>
-
- 03 9月, 2015 1 次提交
-
-
由 Daniel Borkmann 提交于
Fengguang reported, that some randconfig generated the following linker issue with nf_ct_zone_dflt object involved: [...] CC init/version.o LD init/built-in.o net/built-in.o: In function `ipv4_conntrack_defrag': nf_defrag_ipv4.c:(.text+0x93e95): undefined reference to `nf_ct_zone_dflt' net/built-in.o: In function `ipv6_defrag': nf_defrag_ipv6_hooks.c:(.text+0xe3ffe): undefined reference to `nf_ct_zone_dflt' make: *** [vmlinux] Error 1 Given that configurations exist where we have a built-in part, which is accessing nf_ct_zone_dflt such as the two handlers nf_ct_defrag_user() and nf_ct6_defrag_user(), and a part that configures nf_conntrack as a module, we must move nf_ct_zone_dflt into a fixed, guaranteed built-in area when netfilter is configured in general. Therefore, split the more generic parts into a common header under include/linux/netfilter/ and move nf_ct_zone_dflt into the built-in section that already holds parts related to CONFIG_NF_CONNTRACK in the netfilter core. This fixes the issue on my side. Fixes: 308ac914 ("netfilter: nf_conntrack: push zone object into functions") Reported-by: NFengguang Wu <fengguang.wu@intel.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 9月, 2015 10 次提交
-
-
由 David S. Miller 提交于
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Just have a flags member instead. In file included from include/linux/linkage.h:4:0, from include/linux/kernel.h:6, from net/core/flow_dissector.c:1: In function 'flow_keys_hash_start', inlined from 'flow_hash_from_keys' at net/core/flow_dissector.c:553:34: >> include/linux/compiler.h:447:38: error: call to '__compiletime_assert_459' declared with attribute error: BUILD_BUG_ON failed: FLOW_KEYS_HASH_OFFSET % sizeof(u32) Reported-by: Nkbuild test robot <fengguang.wu@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add an input flag to flow dissector on rather dissection should stop when encapsulation is detected (IP/IP or GRE). Also, add a key_control flag that indicates encapsulation was encountered during the dissection. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add an input flag to flow dissector on rather dissection should be stopped when a flow label is encountered. Presumably, the flow label is derived from a sufficient hash of an inner transport packet so further dissection is not needed (that is ports are not included in the flow hash). Using the flow label instead of ports has the additional benefit that packet fragments should hash to same value as non-fragments for a flow (assuming that the same flow label is used). We set this flag by default in for skb_get_hash. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add an input flag to flow dissector on rather dissection should be stopped when an L3 packet is encountered. This would be useful if a caller just wanted to get IP addresses of the outermost header (e.g. to do an L3 hash). Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Add an input flag to flow dissector on rather dissection should be attempted on a first fragment. Also add key_control flags to indicate that a packet is a fragment or first fragment. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Create __get_hash_from_flowi6 and __get_hash_from_flowi4 to get the flow keys and hash based on flowi structures. These are called by __skb_get_hash_flowi6 and __skb_get_hash_flowi4. Also, created get_hash_from_flowi6 and get_hash_from_flowi4 which can be called when just the hash value for a flowi is needed. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Move __skb_set_sw_hash to skbuff.h and add __skb_set_hash which is a common method (between __skb_set_sw_hash and skb_set_hash) to set the hash in an skbuff. Also, move skb_clear_hash to be closer to __skb_set_hash. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tom Herbert 提交于
Move the flow dissector functions that are specific to skbuffs into skbuff.h out of flow_dissector.h. This makes flow_dissector.h have no dependencies on skbuff.h. Signed-off-by: NTom Herbert <tom@herbertland.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
A number of VRF patches used 'int' for table id. It should be u32 to be consistent with the rest of the stack. Fixes: 4e3c8992 ("net: Introduce VRF related flags and helpers") 15be405e ("net: Add inet_addr lookup by table") 30bbaa19 ("net: Fix up inet_addr_type checks") 021dd3b8 ("net: Add routes to the table associated with the device") dc028da5 ("inet: Move VRF table lookup to inlined function") f6d3c192 ("net: FIB tracepoints") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Reviewed-by: NNikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 9月, 2015 5 次提交
-
-
由 Daniel Borkmann 提交于
Commit 0838aa7f ("netfilter: fix netns dependencies with conntrack templates") migrated templates to the new allocator api, but forgot to update error paths for them in CT and synproxy to use nf_ct_tmpl_free() instead of nf_conntrack_free(). Due to that, memory is being freed into the wrong kmemcache, but also we drop the per net reference count of ct objects causing an imbalance. In Brad's case, this leads to a wrap-around of net->ct.count and thus lets __nf_conntrack_alloc() refuse to create a new ct object: [ 10.340913] xt_addrtype: ipv6 does not support BROADCAST matching [ 10.810168] nf_conntrack: table full, dropping packet [ 11.917416] r8169 0000:07:00.0 eth0: link up [ 11.917438] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 12.815902] nf_conntrack: table full, dropping packet [ 15.688561] nf_conntrack: table full, dropping packet [ 15.689365] nf_conntrack: table full, dropping packet [ 15.690169] nf_conntrack: table full, dropping packet [ 15.690967] nf_conntrack: table full, dropping packet [...] With slab debugging, it also reports the wrong kmemcache (kmalloc-512 vs. nf_conntrack_ffffffff81ce75c0) and reports poison overwrites, etc. Thus, to fix the problem, export and use nf_ct_tmpl_free() instead. Fixes: 0838aa7f ("netfilter: fix netns dependencies with conntrack templates") Reported-by: NBrad Jackson <bjackson0971@gmail.com> Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
由 Pravin B Shelar 提交于
opts_size is only written and never read. Following patch removes this unused variable. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
As David pointed out, spinlock are no longer needed to protect the per cpu queues used in gro cells infrastructure. Also use new napi_complete_done() API so that gro_flush_timeout tweaks have an effect. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
Currently, the following case doesn't use DCTCP, even if it should: A responder has f.e. Cubic as system wide default, but for a specific route to the initiating host, DCTCP is being set in RTAX_CC_ALGO. The initiating host then uses DCTCP as congestion control, but since the initiator sets ECT(0), tcp_ecn_create_request() doesn't set ecn_ok, and we have to fall back to Reno after 3WHS completes. We were thinking on how to solve this in a minimal, non-intrusive way without bloating tcp_ecn_create_request() needlessly: lets cache the CA ecn option flag in RTAX_FEATURES. In other words, when ECT(0) is set on the SYN packet, set ecn_ok=1 iff route RTAX_FEATURES contains the unexposed (internal-only) DST_FEATURE_ECN_CA. This allows to only do a single metric feature lookup inside tcp_ecn_create_request(). Joint work with Florian Westphal. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Signed-off-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Currently tun-info options pointer is used in few cases to pass options around. But tunnel options can be accessed using ip_tunnel_info_opts() API without using the pointer. Following patch removes the redundant pointer and consistently make use of API. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Reviewed-by: NJesse Gross <jesse@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 31 8月, 2015 3 次提交
-
-
由 Raghavendra K T 提交于
Signed-off-by: NRaghavendra K T <raghavendra.kt@linux.vnet.ibm.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matan Barak 提交于
Some consumers of the netdev events API would like to know who is the active slave when a NETDEV_CHANGEUPPER or NETDEV_BONDING_FAILOVER events occur. For example, when managing RoCE GIDs, GIDs based on the bond's ips should only be set on the port which corresponds to active slave netdevice. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Matan Barak 提交于
For loopback purposes, RoCE devices should have a default GID in the port GID table, even when the interface is down. In order to do so, we use the IPv6 link local address which would have been genenrated for the related Ethernet netdevice when it goes up as a default GID. addrconf_ifid_eui48 is used to gernerate this address, export it. Signed-off-by: NMatan Barak <matanb@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 30 8月, 2015 3 次提交
-
-
由 Jiri Benc 提交于
By default (subject to the sysctl settings), IPv6 sockets listen also for IPv4 traffic. Vxlan is not prepared for that and expects IPv6 header in packets received through an IPv6 socket. In addition, it's currently not possible to have both IPv4 and IPv6 vxlan tunnel on the same port (unless bindv6only sysctl is enabled), as it's not possible to create and bind both IPv4 and IPv6 vxlan interfaces and there's no way to specify both IPv4 and IPv6 remote/group IP addresses. Set IPV6_V6ONLY on vxlan sockets to fix both of these issues. This is not done globally in udp_tunnel, as l2tp and tipc seems to work okay when receiving IPv4 packets on IPv6 socket and people may rely on this behavior. The other tunnels (geneve and fou) do not support IPv6. Signed-off-by: NJiri Benc <jbenc@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
There's currently nothing preventing directing packets with IPv6 encapsulation data to IPv4 tunnels (and vice versa). If this happens, IPv6 addresses are incorrectly interpreted as IPv4 ones. Track whether the given ip_tunnel_key contains IPv4 or IPv6 data. Store this in ip_tunnel_info. Reject packets at appropriate places if they are supposed to be encapsulated into an incompatible protocol. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Benc 提交于
The mode field holds a single bit of information only (whether the ip_tunnel_info struct is for rx or tx). Change the mode field to bit flags. This allows more mode flags to be added. Signed-off-by: NJiri Benc <jbenc@redhat.com> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Acked-by: NThomas Graf <tgraf@suug.ch> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 8月, 2015 5 次提交
-
-
由 David Ahern 提交于
inetpeer caches based on address only, so duplicate IP addresses within a namespace return the same cached entry. Enhance the ipv4 address key to contain both the IPv4 address and VRF device index. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Move the inetpeer_addr_base union to inetpeer_addr and drop inetpeer_addr_base. Both the a6 and in6_addr overlays are not needed; drop the __be32 version and rename in6 to a6 for consistency with ipv4. Add a new u32 array to the union which removes the need for the typecast in the compare function and the use of a consistent arg for both ipv4 and ipv6 addresses which makes the compare function more readable. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
tcp_metrics and inetpeer both have functions to compare inetpeer addresses. Consolidate into 1 version. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Use inetpeer set,get helpers in tcp_metrics rather than peeking into the inetpeer_addr struct. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
Refactors a common line into helper function. Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 8月, 2015 6 次提交
-
-
由 Phil Sutter 提交于
This way users can attach noqueue just like any other qdisc using tc without having to mess with tx_queue_len first. Signed-off-by: NPhil Sutter <phil@nwl.cc> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
geneve_core module handles send and receive functionality. This way OVS could use the Geneve API. Now with use of tunnel meatadata mode OVS can directly use Geneve netdevice. So there is no need for separate module for Geneve. Following patch consolidates Geneve protocol processing in single module. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Reviewed-by: NJesse Gross <jesse@nicira.com> Acked-by: NJohn W. Linville <linville@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Following patch create new tunnel flag which enable tunnel metadata collection on given device. These devices can be used by tunnel metadata based routing or by OVS. Geneve Consolidation patch get rid of collect_md_tun to simplify tunnel lookup further. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Reviewed-by: NJesse Gross <jesse@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pravin B Shelar 提交于
Introduce function udp_tun_rx_dst() to initialize tunnel dst on receive path. Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Reviewed-by: NJesse Gross <jesse@nicira.com> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
For classifiers getting invoked via tc_classify(), we always need an extra function call into tc_classify_compat(), as both are being exported as symbols and tc_classify() itself doesn't do much except handling of reclassifications when tp->classify() returned with TC_ACT_RECLASSIFY. CBQ and ATM are the only qdiscs that directly call into tc_classify_compat(), all others use tc_classify(). When tc actions are being configured out in the kernel, tc_classify() effectively does nothing besides delegating. We could spare this layer and consolidate both functions. pktgen on single CPU constantly pushing skbs directly into the netif_receive_skb() path with a dummy classifier on ingress qdisc attached, improves slightly from 22.3Mpps to 23.1Mpps. Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net> Acked-by: NAlexei Starovoitov <ast@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Stringer 提交于
Add functions to change connlabel length into nf_conntrack_labels.c so they may be reused by other modules like OVS and nftables without needing to jump through xt_match_check() hoops. Suggested-by: NFlorian Westphal <fw@strlen.de> Signed-off-by: NJoe Stringer <joestringer@nicira.com> Acked-by: NFlorian Westphal <fw@strlen.de> Acked-by: NThomas Graf <tgraf@suug.ch> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-