Add support for the Motorola/Emerson MVME5100 Single Board Computer.

The MVME5100 is a 6U form factor VME64 computer with:

	- A single MPC7410 or MPC750 CPU
	- A HAWK Processor Host Bridge (CPU to PCI) and
	  MultiProcessor Interrupt Controller (MPIC)
	- Up to 500Mb of onboard memory
	- A M48T37 Real Time Clock (RTC) and Non-Volatile Memory chip
	- Two 16550 compatible UARTS
	- Two Intel E100 Fast Ethernets
	- Two PCI Mezzanine Card (PMC) Slots
	- PPCBug Firmware

The HAWK PHB/MPIC is compatible with the MPC10x devices.

There is no onboard disk support. This is usually provided by installing a PMC
in first PMC slot.

This patch revives the board support, it was present in early 2.6
series kernels. The board support in those days was by Matt Porter of
MontaVista Software.

CSC Australia has around 31 of these boards in service. The kernel in use
for the boards is based on 2.6.31. The boards are operated without disks
from a file server.

This patch is based on linux-3.13-rc2 and has been boot tested.

Only boards with 512 Mb of memory are known to work.
Signed-off-by: NStephen Chivers <schivers@csc.com>
Tested-by: NAlessio Igor Bogani <alessio.bogani@elettra.eu>
Signed-off-by: NScott Wood <scottwood@freescale.com>

The last users of Kconfig symbol MPC10X_OPENPIC were removed in v2.6.27.
Its Kconfig entry can be removed now.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichael Ellerman <michael@ellerman.id.au>

The last users of Kconfig symbol MPC10X_OPENPIC were removed in v2.6.27.
Its Kconfig entry can be removed now.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NMichal Marek <mmarek@suse.cz>

Add platform support for the Nintendo Wii video game console.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add platform support for the Nintendo GameCube video game console.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add support for using the USB Gecko adapter via the udbg facility on
the Nintendo GameCube and Wii video game consoles.
The USB Gecko is a 3rd party memory card interface adapter that provides
a EXI (External Interface) to USB serial converter.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NSegher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

Add a config option GAMECUBE_COMMON to be used as a dependency for all
options common to the Nintendo GameCube and Wii video game consoles.
Signed-off-by: NAlbert Herranz <albert_herranz@yahoo.es>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>

CONFIG_PPC_MULTIPLATFORM is a remain of the pre-powerpc days and isn't
really meaningful anymore. It was basically equivalent to PPC64 || 6xx.

This removes it along with the following changes:

 - 32-bit platforms that relied on PPC32 && PPC_MULTIPLATFORM now rely
   on 6xx which is what they want anyway.

 - A new symbol, PPC_BOOK3S, is defined that represent compliance with
   the "Server" variant of the architecture. This is set when either 6xx
   or PPC64 is set and open the door for future BOOK3E 64-bit.

 - 64-bit platforms that relied on PPC64 && PPC_MULTIPLATFORM now use
   PPC64 && PPC_BOOK3S

 - A separate and selectable CONFIG_PPC_OF_BOOT_TRAMPOLINE option is now
   used to control the use of prom_init.c
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>

Support for the C2K cPCI Single Board Computer from GEFanuc
(PowerPC MPC7448 with a Marvell MV64460 chipset).
All features of the board are not supported yet, but the board
boots, flash works, all Ethernet ports are working and PCI
devices are all found (USB and SATA on PCI1 do not work yet).

Part 5 of 5: add the Kconfig entry for the C2K board.
Signed-off-by: NRemi Machet <rmachet@slac.stanford.edu>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

CONFIG_DEVICE_TREE was the only user of CONFIG_WANT_DEVICE_TREE but
it was removed in commit id 25431333
(bootwrapper: Build multiple cuImages).

This removes CONFIG_WANT_DEVICE_TREE from Kconfig and the defconfigs.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Use cuImage bootwrapper until U-Boot port is completed.
Derived heavily from Linkstation port.
Signed-off-by: NJon Loeliger <jdl@freescale.com>
Acked-by: NAndy Wilcox <andy@protium.com>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

This patch adds cuboot support for MPC7448HPC2 platform.
The cuImage can be used with legacy u-boot without FDT support.
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

The various embedded 6xx systems can easily coexist in one kernel
together with the other 6xx based systems, so there is no strict
reason to keep them separate.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The TSI108 code and the 32 bit powermac and chrp platforms
have dependency on PCI that is not easy or desirable to get rid
of.

The easiest fix is to always select CONFIG_PCI if one of those
platforms is enabled.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

The holly support currently has separate rules to wrap its device tree
with its zImage.  This can now be done automatically without the extra
rules so update holly support to use the automatic feature.
Signed-off-by: NMark A. Greer <mgreer@mista.com>
Acked-by: NDavid Gibson <david@gibson.dropbear.id.au>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This finally adds the PPC_PRPMC2800 Kconfig option, the board setup
code (the setup and reset functions) and the defconfig, to support the
Motorola PrPMC2800 platform.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

check_cache_coherency() verifies that the cache coherency setting of
the kernel (CONFIG_NOT_COHERENT_CACHE) matches that left by the firmware,
as indicated by coherency-off device tree property.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch adds PCI bridge support for the Marvell mv64x60 chip.
We also provide the ability to read/write the mv64x60 hotswap
register via sysfs if the hs_reg_valid property is set in the
device tree.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This patch creates platform_device entries for the Marvell mv64x60
MPSC (multi-protocol serial controller) ports, based on information
contained in the device tree.

This driver (like the other mv64x60 drivers) are unusual in that it
works on both the MIPS and PowerPC architectures.  Because of that,
the drivers do not support the normal PowerPC of_platform_bus_type.
They support platform_bus_type instead.
Signed-off-by: NDale Farnsworth <dale@farnsworth.org>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add PowerPC 750 Holly/Hickory platform support
Signed-off-by: NStephen Winiecki <stevewin@us.ibm.com>
Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
Acked-by: NOlof Johansson <olof@lixom.net>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

When we started arch/powerpc we duplicated a number of config options from
arch/ppc for various platforms that are supported.  Now that we actually
support a few platforms, remove all the ones that haven't been moved over.
Additionally, this cleanup moved the 82xx/PQ2 options over into
arch/powerpc/platforms/82xx/Kconfig where they belong.  It also killed
GEN550 which doesn't exist in arch/powerpc.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Acked-by: NG. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Fixes image build error:

ln: accessing `arch/powerpc/boot/zImage': No such file or directory
make[1]: *** [arch/powerpc/boot/zImage] Error 1
make: *** [zImage] Error 2
Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org>
Acked-by: NG. Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>

Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Standardize the miniscule percentage of occurrences of "depends" in
Kconfig files to "depends on", and update kconfig-language.txt to
reflect that.
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com>
Signed-off-by: NAdrian Bunk <bunk@stusta.de>

Support for the Kurobox(HG)/LinkStation-I NAS systems by Buffalo
Technology, should be also applicable to the PPC TeraStation family.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

platforms/embedded6xx is probably going away, and 52xx boards need
some extra support the 52xx interrupt controller and DMA engine
anyway.  It makes sense to group all the 52xx bits into a single path.
Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
Signed-off-by: NSylvain Munaut <tnt@246tNt.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This adds a new hardware information table for mpic. This enables
the mpic code to deal with mpic controllers with different register
layouts and hardware behaviours.

This introduces CONFIG_MPIC_WEIRD.  For boards with non standard mpic
controllers, select CONFIG_MPIC_WEIRD and add its hardware information
in the mpic_infos[] array.

TSI108/109 PIC takes the first index of weird hardware information
table.  :)  The table can be extended. The Tsi108/109 PIC looks like
standard OpenPIC but, in fact, is different in register mapping and
behavior.

The patch does not affect the behavior of standard mpic.  If
CONFIG_MPIC_WEIRD is not defined, the code is essentially identical to
the current code.

[benh@kernel.crashing.org:
This patch is a slightly cleaned up version of Zang Roy's support for
the TSI108 MPIC variant. It also fixes up MPC7448_hpc2 to use the new
version of the type macros and changes the way MPIC is selected in
Kconfig to better match what is done for other system devices.
]
Signed-off-by: NRoy Zang <tie-fei.zang@freescale.com>
Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Add support for Freescale mpc7448 (Taiga) board support
Signed-off-by: NRoy Zang  <tie-fei.zang@freescale.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Updated Kconfig & Makefiles in prep for adding support for the Freescale
MPC83xx family of processors to arch/powerpc.  Moved around some config
options that are more globally applicable to other PowerPC processors.
Added a temporary config option (83xx) to match existing arch/ppc support
for the MPC83xx line.
Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This changes the parameters for i8259_init so that it takes two
parameters: a physical address for generating an interrupt
acknowledge cycle, and an interrupt number offset.  i8259_init
now sets the irq_desc[] for its interrupts; all the callers
were doing this, and that code is gone now.  This also defines
a CONFIG_PPC_I8259 symbol to select i8259.o for inclusion, and
makes the platforms that need it select that symbol.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

This defines a CONFIG_INDIRECT_PCI symbol to control whether it
gets used or not, and fixes the Kconfig to select that symbol for
platforms that need it.
Signed-off-by: NPaul Mackerras <paulus@samba.org>

Complete moving arch/ppc64/kernel/mpic.h,
        include/asm-ppc/reg.h, include/asm-ppc64/kdebug.h
	        and include/asm-ppc64/kprobes.h
Add arch/powerpc/platforms/Makefile and use it from
	arch/powerpc/Makefile
Introduce OLDARCH temporarily so we can point back to
	the originating architecture
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>

This creates the directory structure under arch/powerpc and a bunch
of Kconfig files.  It does a first-cut merge of arch/powerpc/mm,
arch/powerpc/lib and arch/powerpc/platforms/powermac.  This is enough
to build a 32-bit powermac kernel with ARCH=powerpc.

For now we are getting some unmerged files from arch/ppc/kernel and
arch/ppc/syslib, or arch/ppc64/kernel.  This makes some minor changes
to files in those directories and files outside arch/powerpc.

The boot directory is still not merged.  That's going to be interesting.
Signed-off-by: NPaul Mackerras <paulus@samba.org>