Make KVM_GUEST depend on BROKEN_ON_SMP so that it cannot be enabled with
SMP.

SMP kernels use ll/sc instructions for an atomic section in the tlb fill
handler, with a tlbp instruction contained in the middle. This cannot be
emulated with trap & emulate KVM because the tlbp instruction traps and
the eret to return to the guest code clears the LLbit which makes the sc
instruction always fail.
Signed-off-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Sanjay Lal <sanjayl@kymasys.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: kvm@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/5588/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Original posting:

	http://lkml.kernel.org/r/20121214184202.F54094D9@kernel.stglabs.ibm.com

Several architectures have similar stack debugging config options.
They all pretty much do the same thing, some with slightly
differing help text.

This patch changes the architectures to instead enable a Kconfig
boolean, and then use that boolean in the generic Kconfig.debug
to present the actual menu option.  This removes a bunch of
duplication and adds consistency across arches.
Signed-off-by: NDave Hansen <dave@linux.vnet.ibm.com>
Reviewed-by: NH. Peter Anvin <hpa@zytor.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com> [for tile]
Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

The vpe.c code uses the 'struct module' which is only available if
CONFIG_MODULES is selected.

Also fixes the following build problem on a lantiq allmodconfig:
In file included from arch/mips/kernel/vpe.c:41:0:
include/linux/moduleloader.h: In function 'apply_relocate':
include/linux/moduleloader.h:48:63: error: dereferencing pointer
to incomplete type
include/linux/moduleloader.h: In function 'apply_relocate_add':
include/linux/moduleloader.h:70:63: error: dereferencing pointer
to incomplete type
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5562/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The cores used on the SEAD-3 platform do not have L2 caches, so
this option should not be turned on. Originally fixed on public
'linux-mti-3.8' release branch.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5559/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The GENERIC_PCI_IOMAP does not depend on CONFIG_PCI so move
it to the CONFIG_MIPS symbol so it's always selected for MIPS.
This fixes the missing pci_iomap declaration for MIPS.
Moreover, the pci_iounmap function was not defined in the
io.h header file if the CONFIG_PCI symbol is not set,
but it should since MIPS is not using CONFIG_GENERIC_IOMAP.

This fixes the following problem on a allyesconfig:

drivers/net/ethernet/3com/3c59x.c:1031:2: error: implicit declaration of
function 'pci_iomap' [-Werror=implicit-function-declaration]
drivers/net/ethernet/3com/3c59x.c:1044:3: error: implicit declaration of
function 'pci_iounmap' [-Werror=implicit-function-declaration]
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5478/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Enabling BOOT_RAW is mandatory to get a binary image (objcopy from ELF
to binary) to work. This does not affect the ELF kernels which are used
by CFE on BCM63XX DSL platforms, but is going to be necessary to support
BCM63XX on Cable Modem chips such as BCM3368.
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/5500/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This board has been EOL for many years now; lets not burden people doing
build coverage and other tree wide work with working on essentially dead
files.

[ralf@linux-mips.org: Also remove arch/mips/include/asm/mach-wrppmc/war.h.]
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: linux-mips@linux-mips.org
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Patchwork: http://patchwork.linux-mips.org/patch/5503/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

All BCM63XX SoCs starting with BCM6358 have a BMIPS4350 instead of a
BMIPS3300, so select it unless support for any of the older SoCs is
selected.
All BMIPS4350 have only two CPUs, so select the appropriate default.
Signed-off-by: NJonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: John Crispin <blogic@openwrt.org>
Cc: Maxime Bizon <mbizon@freebox.fr>
Cc: Florian Fainelli <florian@openwrt.org>
Cc: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/5355/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Implements basic stack protector support based on ARM version in
c743f380 , with Kconfig option,
constant canary value set at boot time, and script to check if
compiler actually supports stack protector.

Tested by creating a kernel module that writes past end of char[].
Signed-off-by: NGregory Fong <gregory.0xf0@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: Filippo Arcidiacono <filippo.arcidiacono@st.com>
Cc: Carmelo Amoroso <carmelo.amoroso@st.com>
Patchwork: https://patchwork.linux-mips.org/patch/5448/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

PowerTV does not provide a prom_putchar function needed for early
printk so remove this symbol for this platform.

Fixes the following problem when EARLY_PRINTK is enabled for powertv:

arch/mips/kernel/early_printk.c:24: undefined reference to `prom_putchar'
arch/mips/kernel/early_printk.c:23: undefined reference to `prom_putchar'
Signed-off-by: NMarkos Chandras <markos.chandras@imgtec.com>
Acked-by: NSteven J. Hill <Steven.Hill@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5477/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add SYS_SUPPORTS_ZBOOT and SYS_SUPPORTS_ZBOOT_UART16550 config options
for XLR and XLP.

Update boot/compressed/uart-16550.c to add UART port for XLR and XLP.
Signed-off-by: NJayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/5417/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

This enables support for CONFIG_NO_HZ_FULL.
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

CAVIUM_OCTEON_SOC most place we used to use CPU_CAVIUM_OCTEON.  This
allows us to CPU_CAVIUM_OCTEON in places where we have no OCTEON SOC.

Remove CAVIUM_OCTEON_SIMULATOR as it doesn't really do anything, we can
get the same configuration with CAVIUM_OCTEON_SOC.
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-ide@vger.kernel.org
Cc: linux-edac@vger.kernel.org
Cc: linux-i2c@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: spi-devel-general@lists.sourceforge.net
Cc: devel@driverdev.osuosl.org
Cc: linux-usb@vger.kernel.org
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: NWolfram Sang <wsa@the-dreams.de>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Patchwork: https://patchwork.linux-mips.org/patch/5295/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Ever since commit 45f035ab ("CONFIG_HOTPLUG should be always on"),
it has been basically impossible to build a kernel with CONFIG_HOTPLUG
turned off.  Remove all the remaining references to it.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Doug Thompson <dougthompson@xmission.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Steven Whitehouse <swhiteho@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: NHans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add new clockevent driver that uses the counter present on the MIPS
Global Interrupt Controller.
Signed-off-by: NRaghu Gandham <Raghu.Gandham@imgtec.com>
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

Reorganize some of the GIC clocksource driver code. Below is a list of
the various changes.

  * No longer select CSRC_GIC by default for Malta platform.
  * Limit choice for either the GIC or R4K clocksource, not both.
  * Change location in Makefile.
  * Created new 'gic_read_count' function in common 'irq-gic.c' file.
  * Change 'git_hpt_read' function in 'csrc-gic.c' to use new function.
  * Surround GIC specific code in Malta platform code with #ifdef's.
  * Only initialize the GIC clocksource if it was selected. Original
    code called it unconditionally if a GIC was found.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

This adds the option to build the Linux kernel using only the
microMIPS ISA. The resulting kernel binary is, at a minimum,
20% smaller than using the MIPS32R2 ISA.
Signed-off-by: NSteven J. Hill <Steven.Hill@imgtec.com>

- Add the KVM option to MIPS build files.
- Add default config files for KVM host/guest kernels.
- Change the link address for the Malta KVM Guest kernel to UM (0x40100000).
- Add KVM Kconfig file with KVM/MIPS specific options
Signed-off-by: NSanjay Lal <sanjayl@kymasys.com>
Cc: kvm@vger.kernel.org
Cc: linux-mips@linux-mips.org
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Add support code for rt2880 SOC.

The code detects the SoC and registers the clk / pinmux settings.
Signed-off-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NGabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/5176/

The Kconfig symbol MIPS_DISABLE_OBSOLETE_IDE was added in v2.6.10. It
has never been used. Let's remove it.

The symbol was originally introduced by the following commit

commit 2bfa662b64a7ee593f3039c1d3fd81a7766a63cd
Author: Pete Popov <ppopov@embeddedalley.com>
Date:   Tue Oct 12 06:24:19 2004 +0000
    - Db1550 bug fixes
    - updated defconfig
    - updated Kconfig to use DMA_COHERENT since new silicon is coherent
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Patchwork: http://patchwork.linux-mips.org/patch/5064/Acked-by: NJohn Crispin <blogic@openwrt.org>

The Kconfig symbol MIPS_BOARDS_GEN is unused since v2.6.27. It should
now be removed.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Patchwork: http://patchwork.linux-mips.org/patch/5063/Acked-by: NJohn Crispin <blogic@openwrt.org>

Add new file 'uasm-micromips.c' that allows the micro assembler
to generate microMIPS ISA code. It can be included in the kernel
alongside the classic ISA as long as the platform supports the
microMIPS ISA.
Signed-off-by: NSteven J. Hill <sjhill@mips.com>
Cc: linux-mips@linux-mips.org
Cc: cernekee@gmail.com
Cc: kevink@paralogos.com
Cc: ddaney.cavm@gmail.com
Patchwork: https://patchwork.linux-mips.org/patch/4923/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
(cherry picked from commit 5f011a866afbd03a5379f67f4e70e5efbdfc16e9)

All archs are converted over. Remove the config switch and the
fallback code.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

GENERIC_GPIO has been made equivalent to GPIOLIB in architecture code
and all driver code has been switch to depend on GPIOLIB. It is thus
safe to have GENERIC_GPIO removed.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Acked-by: NGrant Likely <grant.likely@secretlab.ca>

This patch moves cpufreq driver of MIPS architecture to drivers/cpufreq.
Signed-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Acked-by: NJohn Crispin <blogic@openwrt.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Just like the OHCI counter part we just can remove the architecture
specific symbols which prevent these configuration symbols from being
selected by platforms/architectures requiring it. The original
implementation did not scale at all since it required each and every
single architecture to be added for these configuration symbols to be
selected. Now it is up to the EHCI driver and/or platform to select
these configuration symbols accordingly.
Acked-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NFlorian Fainelli <florian@openwrt.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Reviewed-by: NCc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Magnus Damm <magnus.damm@gmail.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/20130321215234.754954871@linutronix.deSigned-off-by: NThomas Gleixner <tglx@linutronix.de>

CONFIG_SNIPROM was renamed to CONFIG_FW_SNIPROM in v3.8. Let's rename
SNIPROM itself too.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: linux-mips@linux-mips.org;
Cc: linux-kernel@vger.kernel.org
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

pnx833x does not seem to use the generic gpio API.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

GENERIC_GPIO was selected next to ARCH_REQUIRE_GPIOLIB, which itself
selects GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

Require gpiolib instead of just GENERIC_GPIO.
Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

Signed-off-by: NAlexandre Courbot <acourbot@nvidia.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>

In commit 887cbce0 ("arch Kconfig: centralise ARCH_NO_VIRT_TO_BUS")
I introduced the config sybmol HAVE_VIRT_TO_BUS and selected that where
needed.  I am not sure what I was thinking.  Instead, just directly
select VIRT_TO_BUS where it is needed.
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Commit f7ade3c1 ("MIPS: Get rid of
CONFIG_CPU_HAS_LLSC") did what it promised to do. But since then that
macro and its Kconfig symbol popped up again. Get rid of those again.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Cc: Jonas Gorski <jogo@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/4978/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

The MIPS implementation of transparent huge-pages (THP) is 64-bit only,
and of course also requires that the CPU supports huge-pages.

Currently it's entirely possible to enable THP in other configurations,
which then fail to build due to pfn_pmd() not being defined.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Cc: linux-mips@linux-mips.org
Acked-by: NDavid Daney <david.daney@cavium.com>
Patchwork: https://patchwork.linux-mips.org/patch/4972/Signed-off-by: NRalf Baechle <ralf@linux-mips.org>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Change it to CONFIG_HAVE_VIRT_TO_BUS and set it in all architecures
that already provide virt_to_bus().
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Reviewed-by: NJames Hogan <james.hogan@imgtec.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: H Hartley Sweeten <hartleys@visionengravers.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Vineet Gupta <Vineet.Gupta1@synopsys.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>