This builds the BCM2711 thermal driver as module for the Raspberry Pi 4.
Signed-off-by: NStefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Reviewed-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Tested-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1578941778-23321-5-git-send-email-stefan.wahren@i2se.com

This is mostly to reorder the entries as they've moved in the Kconfig
hierarchies. Doing this periodically (but not very often) simplifies
conflict resolution for new options, etc.

Link: https://lore.kernel.org/r/20191205211438.27552-3-olof@lixom.netSigned-off-by: NOlof Johansson <olof@lixom.net>

The recently introduced Energy Model (EM) framework manages power cost
tables for the CPUs of the system. Its only user right now is the
scheduler, in the context of Energy Aware Scheduling (EAS).

However, the EM framework also offers a generic infrastructure that
could replace subsystem-specific implementations of the same concepts,
as this is the case in the thermal framework.

So, in order to prepare the migration of the thermal subsystem to use
the EM framework, enable it in the default arm64 defconfig, which is the
most commonly used architecture for IPA. This will also compile-in all
of the EAS code, although it won't be enabled by default -- EAS requires
to use the 'schedutil' CPUFreq governor while arm64 defaults to
'performance'.
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: NQuentin Perret <qperret@google.com>
Signed-off-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20191030151451.7961-2-qperret@google.com

With phy-reset-gpios are enabled for i.MX8MM-EVK board, phy
will be reset. Without CONFIG_AT803X_PHY as y, board will stop
booting in NFS DHCP, because phy is not ready. So mark
CONFIG_AT803X_PHY from m to y to make board boot when using nfs rootfs.
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable the Renesas R-Car M3-W+ (R8A77961) SoC in the ARM64 defconfig.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Tested-by: NYoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Link: https://lore.kernel.org/r/20191023123342.13100-11-geert+renesas@glider.be

This patch adds the new allwinner crypto configs to ARM64 defconfig
Signed-off-by: NCorentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: NMaxime Ripard <maxime@cerno.tech>

Enable support for the S32V234 SoC, including the previously added UART
driver.
Signed-off-by: NMihaela Martinas <Mihaela.Martinas@freescale.com>
Signed-off-by: NAdrian.Nitu <adrian.nitu@freescale.com>
Signed-off-by: NStoica Cosmin-Stefan <cosmin.stoica@nxp.com>
Signed-off-by: NStefan-Gabriel Mirea <stefan-gabriel.mirea@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Select CONFIG_KEYBOARD_IMX_SC_KEY as module by default to
support i.MX8QXP scu key driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

HiSilicon Kunpeng920 SoC's SMMU has Performance Monitor Counter Groups(PMCG).
This patch enables related driver in defconfig.
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Enable CONFIG_CRYPTO_DEV_HISI_ZIP for HiSilicon ZIP controller in Kunpeng920
SoC.
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Enable GPIO_ALTERA driver.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Enable Intel Stratix10 Remote System Update (RSU) driver

The Intel Remote System Update (RSU) driver provides a way for customers
to update the boot configuration of a Intel Stratix 10 SoC device with
significantly reduced risk of corrupting the bitstream storage and
bricking the system.
Signed-off-by: NRichard Gong <richard.gong@intel.com>
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Since there are enough consumers (drivers) for Actions Semi platform in
mainline, let's enable it in ARM64 defconfig. As of now, this platform
can boot a distro from eMMC/uSD.

Link: https://lore.kernel.org/r/20191015152204.5610-1-manivannan.sadhasivam@linaro.orgSigned-off-by: NManivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Enable the Cadence QSPI controller driver that is on the Stratix10 and
Agilex platforms.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Enable the Renesas RZ/G2N (R8A774B1) SoC in the ARM64 defconfig.
Signed-off-by: NBiju Das <biju.das@bp.renesas.com>
Link: https://lore.kernel.org/r/1568725530-55241-3-git-send-email-biju.das@bp.renesas.comSigned-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>

Commit 6334150e ("remoteproc: don't allow modular build")
changes CONFIG_REMOTEPROC to a boolean from a tristate config
option which inhibits all defconfigs marking CONFIG_REMOTEPROC as
a module in compiling the remoteproc and dependent config options.

So fix the configs to have CONFIG_REMOTEPROC built in.

Link: https://lore.kernel.org/r/20190920075946.13282-5-j-keerthy@ti.com
Fixes: 6334150e ("remoteproc: don't allow modular build")
Signed-off-by: NKeerthy <j-keerthy@ti.com>
Acked-by: NWill Deacon <will@kernel.org>
[olof: Fixed up all 4 occurrances in this one commit]
Signed-off-by: NOlof Johansson <olof@lixom.net>

Tested on the Lenovo Yoga C630 where this patch enables USB.
Without it USB devices are not enumerated.

Link: https://lore.kernel.org/r/20190903192625.14775-3-lee.jones@linaro.orgSigned-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Tested on the Lenovo Yoga C630 where this patch enables the
framebuffer (screen/monitor).  Without it the device appears
not to boot.

Link: https://lore.kernel.org/r/20190903192625.14775-2-lee.jones@linaro.orgSigned-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Tested on the Lenovo Yoga C630 where this patch enables the
keyboard, touchpad and touchscreen.

Link: https://lore.kernel.org/r/20190903192625.14775-1-lee.jones@linaro.orgSigned-off-by: NLee Jones <lee.jones@linaro.org>
Reviewed-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

QCOM_A53PLL and QCOM_CLK_APCS_MSM8916 used to be enabled by default in
drivers/clk/qcom/Kconfig. A recent patch changed that by dropping the
'default ARCH_QCOM' directive.

Add the two options explicitly in the arm64 defconfig, to avoid
functional regressions.
Acked-by: NAmit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: NMarc Gonzalez <marc.w.gonzalez@free.fr>
[bjorn: Rewrote subject]
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Now that CONFIG_DRM_MSM is no longer default 'y' add it as a module to all
ARCH_QCOM enabled defconfigs to restore the previous expected build
behavior.

I split this off from the original patch to separate out the ARM64 portions.
Signed-off-by: NJordan Crouse <jcrouse@codeaurora.org>
Reviewed-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: NAndy Gross <agross@kernel.org>

Enable GCC config CONFIG_SM_GCC_8150 and pinctrl config
CONFIG_PINCTRL_SM8150 to make it possible to boot the SM8150 MTP.
Signed-off-by: NVinod Koul <vkoul@kernel.org>
Signed-off-by: NBjorn Andersson <bjorn.andersson@linaro.org>

Enable the ACPI_APEI_PCIEAER configuration to support PCIe AER error report
for the Hisilicon D06 board and the dependencies PCIEAER and ACPI_APEI have
been enabled in the default config.
Signed-off-by: NZhou Wang <wangzhou1@hisilicon.com>
Signed-off-by: NWei Xu <xuwei5@hisilicon.com>

Enable the DesignWare watchdog driver that is present on the Intel
Stratix10 and Agilex platforms.
Signed-off-by: NDinh Nguyen <dinguyen@kernel.org>

Enable the PSCI CPUidle driver to replace the functionality
previously provided by the generic ARM CPUidle driver through
CPU operations.

Link: https://lore.kernel.org/r/20190814125239.6270-2-lorenzo.pieralisi@arm.comSigned-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NArnd Bergmann <arnd@arndb.de>

Allwinner A64 and H6 use the Sun4i SPDIF driver.

Enable this to allow a proper support.
Signed-off-by: NClément Péron <peron.clem@gmail.com>
Signed-off-by: NChen-Yu Tsai <wens@csie.org>

For imx8 we want to enable etnaviv, let's enable it
in defconfig, it will be useful to have it enabled for KernelCI
boot and runtime testing.
Signed-off-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable CONFIG_IR_SUNXI option for ARM64, so that Allwinner A64/H6 SoCs
can use their IR receiver controller.
Signed-off-by: NClément Péron <peron.clem@gmail.com>
Acked-by: NSean Young <sean@mess.org>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>

This enables both the new firmware clock driver and cpufreq driver
available for the RPi3 family of boards.
Signed-off-by: NNicolas Saenz Julienne <nsaenzjulienne@suse.de>
Acked-by: NStefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: NStefan Wahren <wahrenst@gmx.net>

This is available on all imx8 but is not "boot critical" in any way so
build as a module.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Acked-by: NFrank Li <frank.li@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable CONFIG_CLK_IMX8MN to support i.MX8MN clock driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable CONFIG_PINCTRL_IMX8MN by default to support i.MX8MN
pinctrl driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable SDMA support on i.mx8mq/8mm chips, including enabling
CONFIG_FW_LOADER_USER_HELPER/CONFIG_FW_LOADER_USER_HELPER_FALLBACK
for firmware loaded by udev.
Signed-off-by: NRobin Gong <yibin.gong@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable CONFIG_KEYBOARD_SNVS_PWRKEY as module to support i.MX8M
series SoCs' power key.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Build in CONFIG_NVMEM_IMX_OCOTP_SCU.

Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Andy Gross <andy.gross@linaro.org>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Cc: Olof Johansson <olof@lixom.net>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Leonard Crestez <leonard.crestez@nxp.com>
Cc: Marc Gonzalez <marc.w.gonzalez@free.fr>
Cc: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Cc: linux-arm-kernel@lists.infradead.org
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NPeng Fan <peng.fan@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

This patch selects CONFIG_IMX_SCU_SOC by default to support
i.MX system controller unit SoC info driver.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Reviewed-by: NAbel Vesa <abel.vesa@nxp.com>
Reviewed-by: NDong Aisheng <aisheng.dong@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

i.MX8MQ needs CONFIG_QORIQ_THERMAL for thermal support.
Signed-off-by: NAnson Huang <Anson.Huang@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

For imx8m we need a separate small driver to read "speed grading"
information from fuses and determine which OPPs are supported.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

Enable imx-ocotp nvmem driver for fuse access on imx8m family.
The fuse block stores various system information which will be accessed
by client device drivers, e.g. cpufreq driver needs to access fuse for
CPU speed grading setting.  So this nvmem driver gets enabled as
built-in.

Tested on imx8mm-evk.
Signed-off-by: NLeonard Crestez <leonard.crestez@nxp.com>
Signed-off-by: NShawn Guo <shawnguo@kernel.org>

W dniu 19.06.2019 o 16:21, Olof Johansson pisze:
> On Mon, Jun 17, 2019 at 06:04:09PM +0200, Marcin Juszkiewicz wrote:
>> Follow x86-64 defconfig on enabling basic LVM support.
>>
>> Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
>
> Do you need this to be =y? If you use LVM, you usually boot with a ramdisk that
> will hold modules.

Right. Forgot to change.

From 63003d0047062949a1231f67e1efdcb96b54323a Mon Sep 17 00:00:00 2001
From: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Date: Mon, 27 May 2019 20:14:34 +0200
Subject: [PATCH 1/3] arm64 defconfig: enable LVM support

Follow x86-64 defconfig on enabling basic LVM support.
Signed-off-by: NMarcin Juszkiewicz <marcin.juszkiewicz@linaro.org>
Signed-off-by: NOlof Johansson <olof@lixom.net>