- 26 4月, 2023 1 次提交
-
-
由 Dave Chinner 提交于
mainline inclusion from mainline-v5.14-rc4 commit 04fcad80 category: bugfix bugzilla: 187526,https://gitee.com/openeuler/kernel/issues/I6WKVJ Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=04fcad80cd068731a779fb442f78234732683755 -------------------------------- Introduce a helper function xfs_buf_daddr() to extract the disk address of the buffer from the struct xfs_buf. This will replace direct accesses to bp->b_bn and bp->b_maps[0].bm_bn, as well as the XFS_BUF_ADDR() macro. This patch introduces the helper function and replaces all uses of XFS_BUF_ADDR() as this is just a simple sed replacement. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NDarrick J. Wong <djwong@kernel.org> Reviewed-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NDarrick J. Wong <djwong@kernel.org> Signed-off-by: NGuo Xuenan <guoxuenan@huawei.com> Reviewed-by: NYang Erkun <yangerkun@huawei.com> Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com>
-
- 12 4月, 2023 2 次提交
-
-
由 Darrick J. Wong 提交于
mainline inclusion from mainline-v5.19-rc5 commit e45d7cb2 category: bugfix bugzilla: 187164, https://gitee.com/openeuler/kernel/issues/I4KIAO CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=e45d7cb2356e6b59fe64da28324025cc6fcd3fbd -------------------------------- Modify xfs_ifork_ptr to return a NULL pointer if the caller asks for the attribute fork but i_forkoff is zero. This eliminates the ambiguity between i_forkoff and i_af.if_present, which should make it easier to understand the lifetime of attr forks. While we're at it, remove the if_present checks around calls to xfs_idestroy_fork and xfs_ifork_zap_attr since they can both handle attr forks that have already been torn down. Signed-off-by: NDarrick J. Wong <djwong@kernel.org> Reviewed-by: NDave Chinner <dchinner@redhat.com> conflicts: fs/xfs/libxfs/xfs_attr.h fs/xfs/libxfs/xfs_inode_fork.c fs/xfs/libxfs/xfs_inode_fork.h fs/xfs/xfs_icache.c fs/xfs/xfs_inode.c Signed-off-by: NLong Li <leo.lilong@huawei.com> Reviewed-by: NZhang Yi <yi.zhang@huawei.com> Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com>
-
由 Darrick J. Wong 提交于
mainline inclusion from mainline-v5.19-rc5 commit 2ed5b09b category: bugfix bugzilla: 187164, https://gitee.com/openeuler/kernel/issues/I4KIAO CVE: NA Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=2ed5b09b3e8fc274ae8fecd6ab7c5106a364bed1 -------------------------------- Syzkaller reported a UAF bug a while back: ================================================================== BUG: KASAN: use-after-free in xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 Read of size 4 at addr ffff88802cec919c by task syz-executor262/2958 CPU: 2 PID: 2958 Comm: syz-executor262 Not tainted 5.15.0-0.30.3-20220406_1406 #3 Hardware name: Red Hat KVM, BIOS 1.13.0-2.module+el8.3.0+7860+a7792d29 04/01/2014 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x82/0xa9 lib/dump_stack.c:106 print_address_description.constprop.9+0x21/0x2d5 mm/kasan/report.c:256 __kasan_report mm/kasan/report.c:442 [inline] kasan_report.cold.14+0x7f/0x11b mm/kasan/report.c:459 xfs_ilock_attr_map_shared+0xe3/0xf6 fs/xfs/xfs_inode.c:127 xfs_attr_get+0x378/0x4c2 fs/xfs/libxfs/xfs_attr.c:159 xfs_xattr_get+0xe3/0x150 fs/xfs/xfs_xattr.c:36 __vfs_getxattr+0xdf/0x13d fs/xattr.c:399 cap_inode_need_killpriv+0x41/0x5d security/commoncap.c:300 security_inode_need_killpriv+0x4c/0x97 security/security.c:1408 dentry_needs_remove_privs.part.28+0x21/0x63 fs/inode.c:1912 dentry_needs_remove_privs+0x80/0x9e fs/inode.c:1908 do_truncate+0xc3/0x1e0 fs/open.c:56 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 RIP: 0033:0x7f7ef4bb753d Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1b 79 2c 00 f7 d8 64 89 01 48 RSP: 002b:00007f7ef52c2ed8 EFLAGS: 00000246 ORIG_RAX: 0000000000000055 RAX: ffffffffffffffda RBX: 0000000000404148 RCX: 00007f7ef4bb753d RDX: 00007f7ef4bb753d RSI: 0000000000000000 RDI: 0000000020004fc0 RBP: 0000000000404140 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0030656c69662f2e R13: 00007ffd794db37f R14: 00007ffd794db470 R15: 00007f7ef52c2fc0 </TASK> Allocated by task 2953: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track mm/kasan/common.c:46 [inline] set_alloc_info mm/kasan/common.c:434 [inline] __kasan_slab_alloc+0x68/0x7c mm/kasan/common.c:467 kasan_slab_alloc include/linux/kasan.h:254 [inline] slab_post_alloc_hook mm/slab.h:519 [inline] slab_alloc_node mm/slub.c:3213 [inline] slab_alloc mm/slub.c:3221 [inline] kmem_cache_alloc+0x11b/0x3eb mm/slub.c:3226 kmem_cache_zalloc include/linux/slab.h:711 [inline] xfs_ifork_alloc+0x25/0xa2 fs/xfs/libxfs/xfs_inode_fork.c:287 xfs_bmap_add_attrfork+0x3f2/0x9b1 fs/xfs/libxfs/xfs_bmap.c:1098 xfs_attr_set+0xe38/0x12a7 fs/xfs/libxfs/xfs_attr.c:746 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_setxattr+0x11b/0x177 fs/xattr.c:180 __vfs_setxattr_noperm+0x128/0x5e0 fs/xattr.c:214 __vfs_setxattr_locked+0x1d4/0x258 fs/xattr.c:275 vfs_setxattr+0x154/0x33d fs/xattr.c:301 setxattr+0x216/0x29f fs/xattr.c:575 __do_sys_fsetxattr fs/xattr.c:632 [inline] __se_sys_fsetxattr fs/xattr.c:621 [inline] __x64_sys_fsetxattr+0x243/0x2fe fs/xattr.c:621 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 Freed by task 2949: kasan_save_stack+0x19/0x38 mm/kasan/common.c:38 kasan_set_track+0x1c/0x21 mm/kasan/common.c:46 kasan_set_free_info+0x20/0x30 mm/kasan/generic.c:360 ____kasan_slab_free mm/kasan/common.c:366 [inline] ____kasan_slab_free mm/kasan/common.c:328 [inline] __kasan_slab_free+0xe2/0x10e mm/kasan/common.c:374 kasan_slab_free include/linux/kasan.h:230 [inline] slab_free_hook mm/slub.c:1700 [inline] slab_free_freelist_hook mm/slub.c:1726 [inline] slab_free mm/slub.c:3492 [inline] kmem_cache_free+0xdc/0x3ce mm/slub.c:3508 xfs_attr_fork_remove+0x8d/0x132 fs/xfs/libxfs/xfs_attr_leaf.c:773 xfs_attr_sf_removename+0x5dd/0x6cb fs/xfs/libxfs/xfs_attr_leaf.c:822 xfs_attr_remove_iter+0x68c/0x805 fs/xfs/libxfs/xfs_attr.c:1413 xfs_attr_remove_args+0xb1/0x10d fs/xfs/libxfs/xfs_attr.c:684 xfs_attr_set+0xf1e/0x12a7 fs/xfs/libxfs/xfs_attr.c:802 xfs_xattr_set+0xeb/0x1a9 fs/xfs/xfs_xattr.c:59 __vfs_removexattr+0x106/0x16a fs/xattr.c:468 cap_inode_killpriv+0x24/0x47 security/commoncap.c:324 security_inode_killpriv+0x54/0xa1 security/security.c:1414 setattr_prepare+0x1a6/0x897 fs/attr.c:146 xfs_vn_change_ok+0x111/0x15e fs/xfs/xfs_iops.c:682 xfs_vn_setattr_size+0x5f/0x15a fs/xfs/xfs_iops.c:1065 xfs_vn_setattr+0x125/0x2ad fs/xfs/xfs_iops.c:1093 notify_change+0xae5/0x10a1 fs/attr.c:410 do_truncate+0x134/0x1e0 fs/open.c:64 handle_truncate fs/namei.c:3084 [inline] do_open fs/namei.c:3432 [inline] path_openat+0x30ab/0x396d fs/namei.c:3561 do_filp_open+0x1c4/0x290 fs/namei.c:3588 do_sys_openat2+0x60d/0x98c fs/open.c:1212 do_sys_open+0xcf/0x13c fs/open.c:1228 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3a/0x7e arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0x0 The buggy address belongs to the object at ffff88802cec9188 which belongs to the cache xfs_ifork of size 40 The buggy address is located 20 bytes inside of 40-byte region [ffff88802cec9188, ffff88802cec91b0) The buggy address belongs to the page: page:00000000c3af36a1 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x2cec9 flags: 0xfffffc0000200(slab|node=0|zone=1|lastcpupid=0x1fffff) raw: 000fffffc0000200 ffffea00009d2580 0000000600000006 ffff88801a9ffc80 raw: 0000000000000000 0000000080490049 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88802cec9080: fb fb fb fc fc fa fb fb fb fb fc fc fb fb fb fb ffff88802cec9100: fb fc fc fb fb fb fb fb fc fc fb fb fb fb fb fc >ffff88802cec9180: fc fa fb fb fb fb fc fc fa fb fb fb fb fc fc fb ^ ffff88802cec9200: fb fb fb fb fc fc fb fb fb fb fb fc fc fb fb fb ffff88802cec9280: fb fb fc fc fa fb fb fb fb fc fc fa fb fb fb fb ================================================================== The root cause of this bug is the unlocked access to xfs_inode.i_afp from the getxattr code paths while trying to determine which ILOCK mode to use to stabilize the xattr data. Unfortunately, the VFS does not acquire i_rwsem when vfs_getxattr (or listxattr) call into the filesystem, which means that getxattr can race with a removexattr that's tearing down the attr fork and crash: xfs_attr_set: xfs_attr_get: xfs_attr_fork_remove: xfs_ilock_attr_map_shared: xfs_idestroy_fork(ip->i_afp); kmem_cache_free(xfs_ifork_cache, ip->i_afp); if (ip->i_afp && ip->i_afp = NULL; xfs_need_iread_extents(ip->i_afp)) <KABOOM> ip->i_forkoff = 0; Regrettably, the VFS is much more lax about i_rwsem and getxattr than is immediately obvious -- not only does it not guarantee that we hold i_rwsem, it actually doesn't guarantee that we *don't* hold it either. The getxattr system call won't acquire the lock before calling XFS, but the file capabilities code calls getxattr with and without i_rwsem held to determine if the "security.capabilities" xattr is set on the file. Fixing the VFS locking requires a treewide investigation into every code path that could touch an xattr and what i_rwsem state it expects or sets up. That could take years or even prove impossible; fortunately, we can fix this UAF problem inside XFS. An earlier version of this patch used smp_wmb in xfs_attr_fork_remove to ensure that i_forkoff is always zeroed before i_afp is set to null and changed the read paths to use smp_rmb before accessing i_forkoff and i_afp, which avoided these UAF problems. However, the patch author was too busy dealing with other problems in the meantime, and by the time he came back to this issue, the situation had changed a bit. On a modern system with selinux, each inode will always have at least one xattr for the selinux label, so it doesn't make much sense to keep incurring the extra pointer dereference. Furthermore, Allison's upcoming parent pointer patchset will also cause nearly every inode in the filesystem to have extended attributes. Therefore, make the inode attribute fork structure part of struct xfs_inode, at a cost of 40 more bytes. This patch adds a clunky if_present field where necessary to maintain the existing logic of xattr fork null pointer testing in the existing codebase. The next patch switches the logic over to XFS_IFORK_Q and it all goes away. Signed-off-by: NDarrick J. Wong <djwong@kernel.org> Reviewed-by: NDave Chinner <dchinner@redhat.com> conflicts: fs/xfs/libxfs/xfs_attr.c fs/xfs/libxfs/xfs_attr.h fs/xfs/libxfs/xfs_attr_leaf.c fs/xfs/libxfs/xfs_bmap.c fs/xfs/libxfs/xfs_inode_buf.c fs/xfs/libxfs/xfs_inode_fork.c fs/xfs/libxfs/xfs_inode_fork.h fs/xfs/xfs_attr_inactive.c fs/xfs/xfs_attr_list.c fs/xfs/xfs_icache.c fs/xfs/xfs_inode.c fs/xfs/xfs_inode.h fs/xfs/xfs_inode_item.c fs/xfs/xfs_itable.c Signed-off-by: NLong Li <leo.lilong@huawei.com> Reviewed-by: NZhang Yi <yi.zhang@huawei.com> Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com>
-
- 15 2月, 2023 1 次提交
-
-
由 Dave Chinner 提交于
stable inclusion from stable-v5.10.146 commit dce466286944389dd77b314e0d1eea6969d0e4d4 category: bugfix bugzilla: https://gitee.com/openeuler/kernel/issues/I6D0VX Reference: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=dce466286944389dd77b314e0d1eea6969d0e4d4 -------------------------------- commit 1eb70f54 upstream. [backport for 5.10.y] xfs_repair catches fork size/format mismatches, but the in-kernel verifier doesn't, leading to null pointer failures when attempting to perform operations on the fork. This can occur in the xfs_dir_is_empty() where the in-memory fork format does not match the size and so the fork data pointer is accessed incorrectly. Note: this causes new failures in xfs/348 which is testing mode vs ftype mismatches. We now detect a regular file that has been changed to a directory or symlink mode as being corrupt because the data fork is for a symlink or directory should be in local form when there are only 3 bytes of data in the data fork. Hence the inode verify for the regular file now fires w/ -EFSCORRUPTED because the inode fork format does not match the format the corrupted mode says it should be in. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <djwong@kernel.org> Signed-off-by: NDave Chinner <david@fromorbit.com> Signed-off-by: NAmir Goldstein <amir73il@gmail.com> Acked-by: NDarrick J. Wong <djwong@kernel.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: NJialin Zhang <zhangjialin11@huawei.com> Reviewed-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
- 21 11月, 2022 1 次提交
-
-
由 Eric Sandeen 提交于
mainline inclusion from mainline-v5.11-rc1 commit 207ddc0e category: bugfix bugzilla: 187102,https://gitee.com/openeuler/kernel/issues/I4KIAO Reference: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=207ddc0ef4f413ab1f4e0c1fcab2226425dec293 -------------------------------- We don't yet support dax on reflinked files, but that is in the works. Further, having the flag set does not automatically mean that the inode is actually "in the CPU direct access state," which depends on several other conditions in addition to the flag being set. As such, we should not catch this as corruption in the verifier - simply not actually enabling S_DAX on reflinked files is enough for now. Fixes: 4f435ebe ("xfs: don't mix reflink and DAX mode for now") Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> [darrick: fix the scrubber too] Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NGuo Xuenan <guoxuenan@huawei.com> Reviewed-by: NZhang Yi <yi.zhang@huawei.com> Signed-off-by: NZheng Zengkai <zhengzengkai@huawei.com>
-
- 16 9月, 2020 3 次提交
-
-
由 Darrick J. Wong 提交于
Redesign the ondisk inode timestamps to be a simple unsigned 64-bit counter of nanoseconds since 14 Dec 1901 (i.e. the minimum time in the 32-bit unix time epoch). This enables us to handle dates up to 2486, which solves the y2038 problem. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGao Xiang <hsiangkao@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Darrick J. Wong 提交于
Redefine xfs_timestamp_t as a __be64 typedef in preparation for the bigtime functionality. Preserve the legacy structure format so that we can let the compiler take care of masking and shifting. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NGao Xiang <hsiangkao@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Darrick J. Wong 提交于
Move this function to xfs_inode_item_recover.c since there's only one caller of it. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAllison Collins <allison.henderson@oracle.com> Reviewed-by: NGao Xiang <hsiangkao@redhat.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
- 07 7月, 2020 3 次提交
-
-
由 Dave Chinner 提交于
This debug code is called on every xfs_iflush() call, which then checks every inode in the buffer for non-zero unlinked list field. Hence it checks every inode in the cluster buffer every time a single inode on that cluster it flushed. This is resulting in: - 38.91% 5.33% [kernel] [k] xfs_iflush - 17.70% xfs_iflush - 9.93% xfs_inobp_check 4.36% xfs_buf_offset 10% of the CPU time spent flushing inodes is repeatedly checking unlinked fields in the buffer. We don't need to do this. The other place we call xfs_inobp_check() is xfs_iunlink_update_dinode(), and this is after we've done this assert for the agino we are about to write into that inode: ASSERT(xfs_verify_agino_or_null(mp, agno, next_agino)); which means we've already checked that the agino we are about to write is not 0 on debug kernels. The inode buffer verifiers do everything else we need, so let's just remove this debug code. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> -
由 Dave Chinner 提交于
When we dirty an inode, we are going to have to write it disk at some point in the near future. This requires the inode cluster backing buffer to be present in memory. Unfortunately, under severe memory pressure we can reclaim the inode backing buffer while the inode is dirty in memory, resulting in stalling the AIL pushing because it has to do a read-modify-write cycle on the cluster buffer. When we have no memory available, the read of the cluster buffer blocks the AIL pushing process, and this causes all sorts of issues for memory reclaim as it requires inode writeback to make forwards progress. Allocating a cluster buffer causes more memory pressure, and results in more cluster buffers to be reclaimed, resulting in more RMW cycles to be done in the AIL context and everything then backs up on AIL progress. Only the synchronous inode cluster writeback in the the inode reclaim code provides some level of forwards progress guarantees that prevent OOM-killer rampages in this situation. Fix this by pinning the inode backing buffer to the inode log item when the inode is first dirtied (i.e. in xfs_trans_log_inode()). This may mean the first modification of an inode that has been held in cache for a long time may block on a cluster buffer read, but we can do that in transaction context and block safely until the buffer has been allocated and read. Once we have the cluster buffer, the inode log item takes a reference to it, pinning it in memory, and attaches it to the log item for future reference. This means we can always grab the cluster buffer from the inode log item when we need it. When the inode is finally cleaned and removed from the AIL, we can drop the reference the inode log item holds on the cluster buffer. Once all inodes on the cluster buffer are clean, the cluster buffer will be unpinned and it will be available for memory reclaim to reclaim again. This avoids the issues with needing to do RMW cycles in the AIL pushing context, and hence allows complete non-blocking inode flushing to be performed by the AIL pushing context. Signed-off-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Keyur Patel 提交于
./xfs/libxfs/xfs_inode_buf.c:56: unnecssary ==> unnecessary ./xfs/libxfs/xfs_inode_buf.c:59: behavour ==> behaviour ./xfs/libxfs/xfs_inode_buf.c:206: unitialized ==> uninitialized Signed-off-by: NKeyur Patel <iamkeyur96@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 20 5月, 2020 10 次提交
-
-
由 Christoph Hellwig 提交于
Move freeing the dynamically allocated attr and COW fork, as well as zeroing the pointers where actually needed into the callers, and just pass the xfs_ifork structure to xfs_idestroy_fork. Also simplify the kmem_free calls by not checking for NULL first. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Both the data and attr fork have a format that is stored in the legacy idinode. Move it into the xfs_ifork structure instead, where it uses up padding. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
There are there are three extents counters per inode, one for each of the forks. Two are in the legacy icdinode and one is directly in struct xfs_inode. Switch to a single counter in the xfs_ifork structure where it uses up padding at the end of the structure. This simplifies various bits of code that just wants the number of extents counter and can now directly dereference it. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Just checking di_forkoff directly is a little easier to follow. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChandan Babu R <chandanrlinux@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
There is not much point in the xfs_iread function, as it has a single caller and not a whole lot of code. Move it into the only caller, and trim down the overdocumentation to just documenting the important "why" instead of a lot of redundant "what". Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
i_delayed_blks is set to 0 in xfs_inode_alloc and can't have anything assigned to it until the inode is visible to the VFS. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Keep the code dealing with the dinode together, and also ensure we verify the dinode in the owner change log recovery case as well. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Handle inodes with a 0 di_mode in xfs_inode_from_disk, instead of partially duplicating inode reading in xfs_iread. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
xfs_iformat_fork is a weird catchall. Split it into one helper for the data fork and one for the attr fork, and then call both helper as well as the COW fork initialization from xfs_inode_from_disk. Order the COW fork initialization after the attr fork initialization given that it can't fail to simplify the error handling. Note that the newly split helpers are moved down the file in xfs_inode_fork.c to avoid the need for forward declarations. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
We always need to fill out the fork structures when reading the inode, so call xfs_iformat_fork from the tail of xfs_inode_from_disk. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 07 5月, 2020 2 次提交
-
-
由 Brian Foster 提交于
iget_flags is unused in xfs_imap_to_bp(). Remove the parameter and fix up the callers. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NAllison Collins <allison.henderson@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Brian Foster 提交于
The shutdown check in xfs_iflush() duplicates checks down in the buffer code. If the fs is shut down, xfs_trans_read_buf_map() always returns an error and falls into the same error path. Remove the unnecessary check along with the warning in xfs_imap_to_bp() that generates excessive noise in the log if the fs is shut down. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NAllison Collins <allison.henderson@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 19 3月, 2020 3 次提交
-
-
由 Christoph Hellwig 提交于
We know the version is 3 if on a v5 file system. For earlier file systems formats we always upgrade the remaining v1 inodes to v2 and thus only use v2 inodes. Use the xfs_sb_version_has_large_dinode helper to check if we deal with small or large dinodes, and thus remove the need for the di_version field in struct icdinode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
The size of the dinode structure is only dependent on the file system version, so instead of checking the individual inode version just use the newly added xfs_sb_version_has_large_dinode helper, and simplify various calling conventions. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Add a new wrapper to check if a file system supports the v3 inode format with a larger dinode core. Previously we used xfs_sb_version_hascrc for that, which is technically correct but a little confusing to read. Also move xfs_dinode_good_version next to xfs_sb_version_has_v3inode so that we have one place that documents the superblock version to inode version relationship. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChandan Rajendra <chandanrlinux@gmail.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 03 3月, 2020 3 次提交
-
-
由 Christoph Hellwig 提交于
Remove the XFS wrappers for converting from and to the kuid/kgid types. Mostly this means switching to VFS i_{u,g}id_{read,write} helpers, but in a few spots the calls to the conversion functions is open coded. To match the use of sb->s_user_ns in the helpers and other file systems, sb->s_user_ns is also used in the quota code. The ACL code already does the conversion in a grotty layering violation in the VFS xattr code, so it keeps using init_user_ns for the identity mapping. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> -
由 Christoph Hellwig 提交于
Use the Linux inode i_uid/i_gid members everywhere and just convert from/to the scalar value when reading or writing the on-disk inode. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
Instead of only synchronizing the uid/gid values in xfs_setup_inode, ensure that they always match to prepare for removing the icdinode fields. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 14 11月, 2019 3 次提交
-
-
由 Christoph Hellwig 提交于
We have the exact same memset in xfs_inode_alloc, which is always called just before xfs_iread. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
There is no point in splitting the fields like this in an purely in-memory structure. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
struct xfs_icdinode is purely an in-memory data structure, so don't use a log on-disk structure for it. This simplifies the code a bit, and also reduces our include hell slightly. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> [darrick: fix a minor indenting problem in xfs_trans_ichgtime] Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 29 6月, 2019 2 次提交
-
-
由 Eric Sandeen 提交于
There are many, many xfs header files which are included but unneeded (or included twice) in the xfs code, so remove them. nb: xfs_linux.h includes about 9 headers for everyone, so those explicit includes get removed by this. I'm not sure what the preference is, but if we wanted explicit includes everywhere, a followup patch could remove those xfs_*.h includes from xfs_linux.h and move them into the files that need them. Or it could be left as-is. Signed-off-by: NEric Sandeen <sandeen@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Christoph Hellwig 提交于
We need to derive the mount pointer from a buffer in a lot of place. Add a direct pointer to short cut the pointer chasing. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
- 12 6月, 2019 2 次提交
-
-
由 Darrick J. Wong 提交于
Finish converting all the old inode_cluster_size >> inopblog users to inodes_per_cluster. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
由 Darrick J. Wong 提交于
Separate the inode geometry information into a distinct structure. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NDave Chinner <dchinner@redhat.com>
-
- 19 2月, 2019 1 次提交
-
-
由 Darrick J. Wong 提交于
Create a separate magic16 check function so that we don't run afoul of static checkers. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com>
-
- 12 2月, 2019 3 次提交
-
-
由 Darrick J. Wong 提交于
Use xfs_verify_magic to check the magic numbers of inodes. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com>
-
由 Brian Foster 提交于
Most verifiers that check on-disk magic values convert the CPU endian magic value constant to disk endian to facilitate compile time optimization of the byte swap and reduce the need for runtime byte swaps in buffer verifiers. Several buffer verifiers do not follow this pattern. Update those verifiers for consistency. Also fix up a random typo in the inode readahead verifier name. Signed-off-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NDarrick J. Wong <darrick.wong@oracle.com> Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com>
-
由 Darrick J. Wong 提交于
Add a new helper to check that a per-AG inode pointer is either null or points somewhere valid within that AG. Signed-off-by: NDarrick J. Wong <darrick.wong@oracle.com> Reviewed-by: NBrian Foster <bfoster@redhat.com> Reviewed-by: NChristoph Hellwig <hch@lst.de>
-