1. 23 4月, 2012 1 次提交
  2. 18 4月, 2012 2 次提交
  3. 13 4月, 2012 2 次提交
  4. 06 4月, 2012 2 次提交
    • S
      ASoC: tegra: fix i2s compilation when !CONFIG_DEBUG_FS · 8abe05c6
      Stephen Warren 提交于
      Commit d4a2eca7 "ASoC: Tegra I2S: Remove dependency on pdev->id" changed
      the prototype of tegra_i2s_debug_add, but didn't update the dummy inline
      used when !CONFIG_DEBUG_FS. Fix that.
      Signed-off-by: NStephen Warren <swarren@nvidia.com>
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      Cc: <stable@vger.kernel.org> # 3.3
      8abe05c6
    • S
      ASoC: set idle_bias_off=1 for all platform DAPM contexts · 3fec6b6d
      Stephen Warren 提交于
      The ASoC core currently defaults to using STANDBY rather than OFF for
      idle ASoC platform devices, which causes a permanent pm_runtime_get() on
      them. This keeps the device active unnecessarily. This can be especially
      problematic when the ASoC platform device and DAI device are the same
      device.
      
      The distinction between OFF and STANDBY is likely not relevant for ASoC
      platform drivers, since they aren't analog devices. So, solve this issue
      by hard-coding idle_bias_off = 1 for all ASoC platform devices. If this
      turns out to be a problem, this value could be sourced from the
      snd_soc_platform_driver, similarly to soc_probe_codec().
      
      Note: Prior to this change, this caused a large (10) runtime_active count
      for the Tegra I2S controller even when not in use, and a leak in that
      value as streams were started and stopped. This change probably hides a
      bug.
      Signed-off-by: NStephen Warren <swarren@nvidia.com>
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      3fec6b6d
  5. 05 4月, 2012 3 次提交
    • F
      ASoC: imx-audmux: Check for NULL pointer · 66bb2a7f
      Fabio Estevam 提交于
      Check for NULL pointer before accessing it.
      Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      66bb2a7f
    • F
      ASoC: imx-audmux: Fix ssi port numbers in sysfs · 00792ac4
      Fabio Estevam 提交于
      Doing a 'cat /sys/kernel/debug/audmux/ssi7' causes the following oops to be printed by the kernel:
      
      Uhandled fault: external abort on non-linefetch (0x008) at 0xf53b003c
      Internal error: : 8 [#1] PREEMPT
      Modules linked in:
      CPU: 0    Not tainted  (3.3.0-00033-gecc726e-dirty #307)
      PC is at audmux_read_file+0x68/0x2f4
      LR is at clk_enable+0x3c/0x48
      pc : [<c001b8c8>]   lr : [<c00190a0>]    psr: a0000013
      sp : c3ad3f38  ip : c30a4000  fp : 00000003
      r10: 00001000  r9 : be83fb00  r8 : c3ad3f80
      r7 : c3ad3f80  r6 : 00000007  r5 : 00031010  r4 : c30a5000
      r3 : f53b0000  r2 : 0000003c  r1 : 380fa100  r0 : c068dda0
      Flags: NzCv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment user
      Control: 0005317f  Table: 83034000  DAC: 00000015
      Process cat (pid: 1042, stack limit = 0xc3ad2270)
      Stack: (0xc3ad3f38 to 0xc3ad4000)
      3f20:                                                      c3139180 00000000
      3f40: c3bc6500 00001000 be83fb00 c3ad3f80 00001000 c3ad2000 00000000 c0095f3c
      3f60: 00000003 c3bc6508 c3bc6500 be83fb00 00000000 00000000 00001000 c0096010
      3f80: 00000000 00000000 b6fe2050 00000000 00001000 be83fb00 00000003 00000003
      3fa0: c000eb88 c000e9e0 00001000 be83fb00 00000003 be83fb00 00001000 00000000
      3fc0: 00001000 be83fb00 00000003 00000003 00000001 00000001 00000000 00000003
      3fe0: 000bec8c be83fae0 0000f808 b6ea8d5c 60000010 00000003 7dff7ede 749bedf1
      [<c001b8c8>] (audmux_read_file+0x68/0x2f4) from [<c0095f3c>] (vfs_read+0xb0/0x144)
      [<c0095f3c>] (vfs_read+0xb0/0x144) from [<c0096010>] (sys_read+0x40/0x70)
      [<c0096010>] (sys_read+0x40/0x70) from [<c000e9e0>] (ret_fast_syscall+0x0/0x2c)
      Code: e1a02186 e2822004 e3500000 e7935186 (e7937002)
      ---[ end trace 4d046e31309023de ]---
      
      Fix the ssi port numbers in sysfs to fix this problem.
      Reported-by: NJoan Carles <joancarles@fqingenieria.es>
      Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com>
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      00792ac4
    • K
      ASoC: ak4642: fixup: mute needs +1 step · 1f99e44c
      Kuninori Morimoto 提交于
      ak4642 out_tlv is +12.0dB to -115.0 dB, and it supports mute.
      But current settings didn't care +1 step for mute.
      This patch adds it
      Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
      Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
      Cc: stable@vger.kernel.org
      1f99e44c
  6. 04 4月, 2012 1 次提交
  7. 03 4月, 2012 4 次提交
  8. 01 4月, 2012 25 次提交
    • L
      Linux 3.4-rc1 · dd775ae2
      Linus Torvalds 提交于
      dd775ae2
    • L
      Merge branch 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console · b7ffff4b
      Linus Torvalds 提交于
      Pull virtio S3 support patches from Amit Shah:
       "Turns out S3 is not different from S4 for virtio devices: the device
        is assumed to be reset, so the host and guest state are to be assumed
        to be out of sync upon resume.  We handle the S4 case with exactly the
        same scenario, so just point the suspend/resume routines to the
        freeze/restore ones.
      
        Once that is done, we also use the PM API's macro to initialise the
        sleep functions.
      
        A couple of cleanups are included: there's no need for special thaw
        processing in the balloon driver, so that's addressed in patches 1 and
        2.
      
        Testing: both S3 and S4 support have been tested using these patches
        using a similar method used earlier during S4 patch development: a
        guest is started with virtio-blk as the only disk, a virtio network
        card, a virtio-serial port and a virtio balloon device.  Ping from
        guest to host, dd /dev/zero to a file on the disk, and IO from the
        host on the virtio-serial port, all at once, while exercising S4 and
        S3 (separately) were tested.  They all continue to work fine after
        resume.  virtio balloon values too were tested by inflating and
        deflating the balloon."
      
      Pulling from Amit, since Rusty is off getting married (and presumably
      shaving people).
      
      * 's3-for-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/amit/virtio-console:
        virtio-pci: switch to PM ops macro to initialise PM functions
        virtio-pci: S3 support
        virtio-pci: drop restore_common()
        virtio: drop thaw PM operation
        virtio: balloon: Allow stats update after restore from S4
      b7ffff4b
    • L
      Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs · 8bb1f229
      Linus Torvalds 提交于
      Pull second try at vfs part d#2 from Al Viro:
       "Miklos' first series (with do_lookup() rewrite split into edible
        chunks) + assorted bits and pieces.
      
        The 'untangling of do_lookup()' series is is a splitup of what used to
        be a monolithic patch from Miklos, so this series is basically "how do
        I convince myself that his patch is correct (or find a hole in it)".
        No holes found and I like the resulting cleanup, so in it went..."
      
      Changes from try 1: Fix a boot problem with selinux, and commit messages
      prettied up a bit.
      
      * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (24 commits)
        vfs: fix out-of-date dentry_unhash() comment
        vfs: split __lookup_hash
        untangling do_lookup() - take __lookup_hash()-calling case out of line.
        untangling do_lookup() - switch to calling __lookup_hash()
        untangling do_lookup() - merge d_alloc_and_lookup() callers
        untangling do_lookup() - merge failure exits in !dentry case
        untangling do_lookup() - massage !dentry case towards __lookup_hash()
        untangling do_lookup() - get rid of need_reval in !dentry case
        untangling do_lookup() - eliminate a loop.
        untangling do_lookup() - expand the area under ->i_mutex
        untangling do_lookup() - isolate !dentry stuff from the rest of it.
        vfs: move MAY_EXEC check from __lookup_hash()
        vfs: don't revalidate just looked up dentry
        vfs: fix d_need_lookup/d_revalidate order in do_lookup
        ext3: move headers to fs/ext3/
        migrate ext2_fs.h guts to fs/ext2/ext2.h
        new helper: ext2_image_size()
        get rid of pointless includes of ext2_fs.h
        ext2: No longer export ext2_fs.h to user space
        mtdchar: kill persistently held vfsmount
        ...
      8bb1f229
    • L
      Merge branch 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · f22e08a7
      Linus Torvalds 提交于
      Pull scheduler fixes from Ingo Molnar.
      
      * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
        sched: Fix incorrect usage of for_each_cpu_mask() in select_fallback_rq()
        sched: Fix __schedule_bug() output when called from an interrupt
        sched/arch: Introduce the finish_arch_post_lock_switch() scheduler callback
      f22e08a7
    • L
      Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip · f187e9fd
      Linus Torvalds 提交于
      Pull perf updates and fixes from Ingo Molnar:
       "It's mostly fixes, but there's also two late items:
      
         - preliminary GTK GUI support for perf report
         - PMU raw event format descriptors in sysfs, to be parsed by tooling
      
        The raw event format in sysfs is a new ABI.  For example for the 'CPU'
        PMU we have:
      
          aldebaran:~> ll /sys/bus/event_source/devices/cpu/format/*
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/any
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/cmask
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/edge
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/event
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/inv
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/offcore_rsp
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/pc
          -r--r--r--. 1 root root 4096 Mar 31 10:29 /sys/bus/event_source/devices/cpu/format/umask
      
        those lists of fields contain a specific format:
      
          aldebaran:~> cat /sys/bus/event_source/devices/cpu/format/offcore_rsp
          config1:0-63
      
        So, those who wish to specify raw events can now use the following
        event format:
      
          -e cpu/cmask=1,event=2,umask=3
      
        Most people will not want to specify any events (let alone raw
        events), they'll just use whatever default event the tools use.
      
        But for more obscure PMU events that have no cross-architecture
        generic events the above syntax is more usable and a bit more
        structured than specifying hex numbers."
      
      * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (41 commits)
        perf tools: Remove auto-generated bison/flex files
        perf annotate: Fix off by one symbol hist size allocation and hit accounting
        perf tools: Add missing ref-cycles event back to event parser
        perf annotate: addr2line wants addresses in same format as objdump
        perf probe: Finder fails to resolve function name to address
        tracing: Fix ent_size in trace output
        perf symbols: Handle NULL dso in dso__name_len
        perf symbols: Do not include libgen.h
        perf tools: Fix bug in raw sample parsing
        perf tools: Fix display of first level of callchains
        perf tools: Switch module.h into export.h
        perf: Move mmap page data_head offset assertion out of header
        perf: Fix mmap_page capabilities and docs
        perf diff: Fix to work with new hists design
        perf tools: Fix modifier to be applied on correct events
        perf tools: Fix various casting issues for 32 bits
        perf tools: Simplify event_read_id exit path
        tracing: Fix ftrace stack trace entries
        tracing: Move the tracing_on/off() declarations into CONFIG_TRACING
        perf report: Add a simple GTK2-based 'perf report' browser
        ...
      f187e9fd
    • L
      Merge tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6 · adb3b1f3
      Linus Torvalds 提交于
      Pull PARISC misc updates from James Bottomley:
       "This is a couple of minor updates (fixing lws futex locking and
        removing some obsolete cpu_*_map calls)."
      
      * tag 'parisc-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
        [PARISC] remove references to cpu_*_map.
        [PARISC] futex: Use same lock set as lws calls
      adb3b1f3
    • L
      Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 · a75ee6ec
      Linus Torvalds 提交于
      Pull SCSI updates from James Bottomley:
       "This is primarily another round of driver updates (lpfc, bfa, fcoe,
        ipr) plus a new ufshcd driver.  There shouldn't be anything
        controversial in here (The final deletion of scsi proc_ops which
        caused some build breakage has been held over until the next merge
        window to give us more time to stabilise it).
      
        I'm afraid, with me moving continents at exactly the wrong time,
        anything submitted after the merge window opened has been held over to
        the next merge window."
      
      * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (63 commits)
        [SCSI] ipr: Driver version 2.5.3
        [SCSI] ipr: Increase alignment boundary of command blocks
        [SCSI] ipr: Increase max concurrent oustanding commands
        [SCSI] ipr: Remove unnecessary memory barriers
        [SCSI] ipr: Remove unnecessary interrupt clearing on new adapters
        [SCSI] ipr: Fix target id allocation re-use problem
        [SCSI] atp870u, mpt2sas, qla4xxx use pci_dev->revision
        [SCSI] fcoe: Drop the rtnl_mutex before calling fcoe_ctlr_link_up
        [SCSI] bfa: Update the driver version to 3.0.23.0
        [SCSI] bfa: BSG and User interface fixes.
        [SCSI] bfa: Fix to avoid vport delete hang on request queue full scenario.
        [SCSI] bfa: Move service parameter programming logic into firmware.
        [SCSI] bfa: Revised Fabric Assigned Address(FAA) feature implementation.
        [SCSI] bfa: Flash controller IOC pll init fixes.
        [SCSI] bfa: Serialize the IOC hw semaphore unlock logic.
        [SCSI] bfa: Modify ISR to process pending completions
        [SCSI] bfa: Add fc host issue lip support
        [SCSI] mpt2sas: remove extraneous sas_log_info messages
        [SCSI] libfc: fcoe_transport_create fails in single-CPU environment
        [SCSI] fcoe: reduce contention for fcoe_rx_list lock [v2]
        ...
      a75ee6ec
    • J
      vfs: fix out-of-date dentry_unhash() comment · c0d02594
      J. Bruce Fields 提交于
      64252c75 "vfs: remove dget() from
      dentry_unhash()" changed the implementation but not the comment.
      
      Cc: Sage Weil <sage@newdream.net>
      Signed-off-by: NJ. Bruce Fields <bfields@redhat.com>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      c0d02594
    • M
      vfs: split __lookup_hash · bad61189
      Miklos Szeredi 提交于
      Split __lookup_hash into two component functions:
      
       lookup_dcache - tries cached lookup, returns whether real lookup is needed
       lookup_real - calls i_op->lookup
      
      This eliminates code duplication between d_alloc_and_lookup() and
      d_inode_lookup().
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      bad61189
    • A
    • A
      untangling do_lookup() - switch to calling __lookup_hash() · a3255546
      Al Viro 提交于
      now we have __lookup_hash() open-coded if !dentry case;
      just call the damn thing instead...
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      a3255546
    • A
      a6ecdfcf
    • A
      ec335e91
    • A
      untangling do_lookup() - massage !dentry case towards __lookup_hash() · d774a058
      Al Viro 提交于
      Reorder if-else cases for starters...
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      d774a058
    • A
      untangling do_lookup() - get rid of need_reval in !dentry case · 08b0ab7c
      Al Viro 提交于
      Everything arriving into if (!dentry) will have need_reval = 1.
      Indeed, the only way to get there with need_reval reset to 0 would
      be via
      	if (unlikely(d_need_lookup(dentry)))
      		goto unlazy;
      	if (unlikely(dentry->d_flags & DCACHE_OP_REVALIDATE)) {
      		status = d_revalidate(dentry, nd);
      	if (unlikely(status <= 0)) {
      		if (status != -ECHILD)
      			need_reval = 0;
      		goto unlazy;
      ...
      unlazy:
      	/* no assignments to dentry */
      	if (dentry && unlikely(d_need_lookup(dentry))) {
      		dput(dentry);
      		dentry = NULL;
      	}
      and if d_need_lookup() had already been false the first time around, it
      will remain false on the second call as well.
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      08b0ab7c
    • A
      untangling do_lookup() - eliminate a loop. · acc9cb3c
      Al Viro 提交于
      d_lookup() *will* fail after successful d_invalidate(), if we are
      holding i_mutex all along.  IOW, we don't need to jump back to
      l: - we know what path will be taken there and can do that (i.e.
      d_alloc_and_lookup()) directly.
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      acc9cb3c
    • A
      untangling do_lookup() - expand the area under ->i_mutex · 37c17e1f
      Al Viro 提交于
      keep holding ->i_mutex over revalidation parts
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      37c17e1f
    • A
      untangling do_lookup() - isolate !dentry stuff from the rest of it. · 3f6c7c71
      Al Viro 提交于
      Duplicate the revalidation-related parts into if (!dentry) branch.
      Next step will be to pull them under i_mutex.
      
      This and the next 8 commits are more or less a splitup of patch
      by Miklos; folks, when you are working with something that convoluted,
      carve your patches up into easily reviewed steps, especially when
      a lot of codepaths involved are rarely hit...
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      3f6c7c71
    • M
      vfs: move MAY_EXEC check from __lookup_hash() · cda309de
      Miklos Szeredi 提交于
      The only caller of __lookup_hash() that needs the exec permission check on
      parent is lookup_one_len().
      
      All lookup_hash() callers already checked permission in LOOKUP_PARENT walk.
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      cda309de
    • M
      vfs: don't revalidate just looked up dentry · 3637c05d
      Miklos Szeredi 提交于
      __lookup_hash() calls ->lookup() if the dentry needs lookup and on success
      revalidates the dentry (all under dir->i_mutex).
      
      While this is harmless it doesn't make a lot of sense.
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      3637c05d
    • M
      vfs: fix d_need_lookup/d_revalidate order in do_lookup · fa4ee159
      Miklos Szeredi 提交于
      Doing revalidate on a dentry which has not yet been looked up makes no sense.
      
      Move the d_need_lookup() check before d_revalidate().
      Signed-off-by: NMiklos Szeredi <mszeredi@suse.cz>
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      fa4ee159
    • A
      ext3: move headers to fs/ext3/ · 4613ad18
      Al Viro 提交于
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      4613ad18
    • A
      migrate ext2_fs.h guts to fs/ext2/ext2.h · f7699f2b
      Al Viro 提交于
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      f7699f2b
    • A
      new helper: ext2_image_size() · 39429c5e
      Al Viro 提交于
      ... implemented that way since the next commit will leave it
      almost alone in ext2_fs.h - most of the file (including
      struct ext2_super_block) is going to move to fs/ext2/ext2.h.
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      39429c5e
    • A
      get rid of pointless includes of ext2_fs.h · 2f99c369
      Al Viro 提交于
      Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
      2f99c369