Mr. Spock would certainly raise an eyebrow to see us using bitwise
operators, when we should clearly be relying on logic. Fascinating.

Change-ID: Ie338010c016f93e9faa2002c07c90b15134b7477
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Refactor the packet split Rx code to properly use half-pages for
receives. The previous code was doing way more mapping and unmapping
than it needed to, and wasn't properly using half-pages.

Increment the page use count each time we give a half-page to an skb,
knowing that the stack will probably process and release the page before
we need it again. Only free and reallocate pages if the count shows that
both half-pages are in use. Add counters to track reallocations and page
reuse.

Change-ID: I534b299196036b64be82b4861a0a4036310a8f22
Signed-off-by: NMitch Williams <mitch.a.williams@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The i40e and i40evf drivers now cleanly handle allocation
failures and can avoid kernel log spew from the memory allocator
when allocations fail, so set __GFP_NOWARN on Rx buffer alloc.

Change-ID: Ic9e1b83c495e2a3ef6b069ba7fb6e52ce134cd23
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The debugging helpers for showing descriptor rings were
dumping the indexes in decimal and the offsets in hex.

Put everything in hex and at least be consistent.

Also update copyright year in file header.

Change-ID: Ia35a21411a2ddb713772dffb4e8718889fcfc895
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

This is the "Don't Give Up" patch.  Previously the
driver could fail an allocation, and then possibly stall
a queue forever, by never coming back to continue receiving
or allocating buffers.

With this patch, the driver will keep polling trying to allocate
receive buffers until it succeeds.  This should keep all receive
queues running even in the face of memory pressure.

Also update copyright year in file header.

Change-ID: I2b103d1ce95b9831288a7222c3343ffa1988b81b
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

While re-enabling interrupts the driver would clear all pending
causes. This meant that if an interrupt was generated while the driver
was cleaning or polling with interrupts disabled, then that interrupt
was lost.  This could cause a queue to become dead, especially for
receive.  Refactored the enable_icr0 function in order to allow
it to be decided by the caller whether the CLEARPBA (clear pending
events) bit will be set while re-enabling the interrupt.

Also update copyright year in file headers.

Change-ID: Ic1db100a05e13c98919057696db147a258ca365a
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Change the driver string to 40-10 Gigabit instead of XL710/X710 for X722
and all future products.

Also update copyright year in file header.

Change-ID: I57fae656b36dc4eb682b2b7a054f8f48f3589149
Signed-off-by: NCatherine Sullivan <catherine.sullivan@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Now that the Force-WriteBack functionality in X710/XL710 devices
has been moved out of the clean routine and into the service task,
we need to make sure WriteBack-On-ITR is separated out since it
is still called from clean.

In the X722 devices, Force-WriteBack implies WriteBack-On-ITR but
without the interrupt, which put the driver into a missed
interrupt scenario and a potential tx-timeout report.

With this patch, we break the two functions out, and call the
appropriate ones at the right place. This will avoid creating missed
interrupt like scenarios for X722 devices.

Also update copyright year in file headers.

Change-ID: Iacbde39f95f332f82be8736864675052c3583a40
Signed-off-by: NAnjali Singhai Jain <anjali.singhai@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The new parameters for add_veb allow us to enable and disable VEB stats,
so let's use them.

Update copyright year.

Change-ID: Ie6e68c68e2d1d459e42168eda661051b56bf0a65
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

With the latest firmware, statistics gathering can now be enabled and
disabled in the HW switch, so we need to add a parameter to allow the
driver to set it as desired.  At the same time, the L2 cloud filtering
parameter has been removed as it was never used.

Older drivers working with the newer firmware and newer drivers working
with older firmware will not run into problems with these bits as the
defaults are reasonable and there is no overlap in the bit definitions.
Also, newer drivers will be forced to update because of the change in
function call parameters, a reminder that the functionality exists.

Also update copyright year.

Change-ID: I9acb9160b892ca3146f2f11a88fdcd86be3cadcc
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Add the use of the new Shared MAC filter bit for multicast and broadcast
filters in order to make better use of the filters available from the
device.  The FW folks have assured me that setting this bit on older FW
will have no affect, so we don't need a version check.

Also fixed a stray indent problem nearby.

Also update copyright year.

Change-ID: I4c5826a32594382a7937a592a24d228588cee7aa
Signed-off-by: NShannon Nelson <shannon.nelson@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Make the DCB firmware version related checks specific to
X710 and XL710 only. These checks are not required for
X722 family of devices.

Introduced an inline routine to help determine if the
MAC type is X710/XL710 or not.

Moved the firmware version related checks in i40e_sw_init()
and defined flags for different cases

Fix the version check to allow using "Set LLDP MIB" AQ
for beyond FVL4 FW releases.

Change-ID: Ib78288343de983aa0354fc28aa36e99b073662c0
Signed-off-by: NNeerav Parikh <neerav.parikh@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

The sync_vsi_filters function is moved up in the service_task because
it may need to request a reset, and we don't want to wait another round
of service task time.

NOTE: Filters will be replayed by sync_vsi_filters including broadcast
and promiscuous settings.

Also, added some error handling in this space in case any of these
fail the driver will retry correctly.

Also update copyright year.

Change-ID: I23f3d552100baecea69466339f738f27614efd47
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>

Ben Hutchings says:

====================
Remove the inet_lro library

The old inet_lro library has been deprecated ever since GRO was
introduced, but there are still a few drivers using it.  Convert
them to GRO and remove it.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are no longer any in-tree drivers that use it.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GRO is simpler to use than the old inet_lro library, and is compatible
with forwarding and bridging configurations.

Compile-tested only.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

GRO is simpler to use than the old inet_lro library, and is compatible
with forwarding and bridging configurations.

Compile-tested only.
Signed-off-by: NBen Hutchings <ben@decadent.org.uk>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The timeout is a long, we return it truncated if it is huge. Basically
harmless as the only caller does a boolean check, but tidy it up anyway.

(64bit build tested this time. Thank you 0day)
Signed-off-by: NAlan Cox <alan@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch moves the qed* driver into utilizing the 8.7.3.0 FW.
This new FW is required for a lot of new SW features, including:
  - Vlan filtering offload
  - Encapsulation offload support
  - HW ingress aggregations
As well as paving the way for the possibility of adding storage protocols
in the future.

V2:
 - Fix kbuild test robot error/warnings.
Signed-off-by: NYuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: NSudarsana Reddy Kalluru <Sudarsana.Kalluru@qlogic.com>
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Xin Long says:

====================
sctp: some cleanups for sctp

There are some unused function and redundant rcu locks should be
removed.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit 8b570dc9 ("sctp: only drop the reference on the datamsg
after sending a msg") used sctp_datamsg_put in sctp_sendmsg, instead of
sctp_datamsg_free, this function has no use in sctp.

So we will remove it.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

sctp_seq_dump_remote_addrs is only called by sctp_assocs_seq_show()
and it has been protected by rcu_read_lock that is from
rhashtable_walk_start().

So we will remove this one.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

__sctp_lookup_association() is only invoked by sctp_v4_err() and
sctp_rcv(), both which run on the rx BH, and it has been protected
by rcu_read_lock [see ip_local_deliver_finish() / ipv6_rcv()].

So we can move it to sctp_lookup_association, only let
sctp_lookup_association use rcu_read_lock.
Signed-off-by: NXin Long <lucien.xin@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

commit 3ed80a62 (cgroup: drop module support) made including
module.h redundant in the net cgroup controllers,
netclassid_cgroup.c and netprio_cgroup.c. This patch
removes them.
Signed-off-by: NRami Rosen <rami.rosen@intel.com>
Acked-by: NTejun Heo <tj@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Sergei Shtylyov says:

====================
Kill useless *switch* defaults in the Renesas Ethernet drivers

   Here's a set of 2 patches against DaveM's 'net-next.git' repo removing
often used *default* cases doing nothing.

[1/2] ravb: kill useless *switch* defaults
[2/2] sh_eth: kill useless *switch* defaults
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver often has the *default* cases doing nothing in the *switch*
statements with  the integer expressions -- remove them.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The  driver has the *default* case doing nothing in the *switch* statement
with an integer expression -- remove it.
Signed-off-by: NSergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Reviewed-by: NSimon Horman <horms+renesas@verge.net.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jeff Kirsher says:

====================
40GbE Intel Wired LAN Driver Updates 2016-02-17

This series contains updates to i40e/i40evf only.

Jesse cleans up a duplicate declaration in probe.  Then fixes a bug where the
driver was using a offset based off a DMA handle while mapping and unmapping
using sync_single_range_for_[cpu|device], when it should be using DMA handle
(returned from alloc_coherent) and the offset of the memory to be sync'd.
Fixed an issue where sync_vsi_filter() was allocating memory in a way that
could sleep (GFP_KERNEL) which was causing a problem when called by the
team driver under rcu_read_lock().

Shannon adds a check to ensure we do not attempt to do TSO when
skb->ip_summed is not set to CHECKSUM_PARTIAL.

Kiran add functions related to port mirroring features such as add/delete
mirror rule.

Jacob assigns the i40e_pf structure directly instead of using a large
memcpy, to avoid a sparse warning and lets the compiler optimize the copy
since it know the size of the structure in advance.

Anjali enables GENEVE capability for XL710/X710 devices with firmware API
version higher than 1.4.  Added flag for automatic rule eviction feature
for X722, which is disabled by default.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tom Lendacky says:

====================
amd-xgbe: AMD XGBE driver updates 2016-02-12

The following updates and fixes are included in this driver update series:

- Disable VLAN filtering in promiscuous mode
- Change from using napi_complete to napi_complete_done
- Use __napi_schedule_irqoff when running in interrupt context
- Verify ethtool speed setting is valid for the selected speedset
- Enable PFC based on the pfc_en setting
- Fix the mapping of priorities to traffic classes
- Do traffic class setup when DCB nl callbacks are invoked
- Check Rx queue fifos before stopping Rx queue DMA
- Switch from disable_irq to masking interrupts for auto-negotiation

This patch series is based on net-next.

Changes from v1:
- Removed #ifndef and #define of CRCPOLY_LE as part of the patch to
  disable VLAN filtering in promiscuous mode
- Reworked changes to xgbe_setup_tc to resolve conflicts with commit
  16e5cc64 (net: rework setup_tc ndo op to consume general tc operand)
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the auto-negotiation interrupt handling disables the irq
instead of masking off the interrupts. This was done because the phy
library was originally used to read and write the PCS registers, which
could not be performed in interrupt context. Now that the phy library is
no longer used to read and write the PCS registers the interrupts can be
masked off in the interrupt service routine eliminating the need to call
disable_irq/enable_irq. This also requires changing the protection mutex
to a spinlock.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Check to be sure that the Rx queue fifos are empty before stopping the
Rx DMA channels.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the netdev traffic class setup is only performed when invoked
through the ndo_setup_tc interface. However, the same setup should be
performed when the dcbnl interface (ieee_setets) is invoked. Rework the
netdev traffic class setup to be invokable through either interface and
also provide the priority to traffic class mapping if available.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The driver is checking the pfc_en field of the ieee_pfc structure to
determine whether to associate a priority with a traffic class. This is
incorrect since the pfc_en field is for determining if PFC is enabled
for a traffic class.

The association of priority to traffic class does not depend on whether
the traffic class is enabled for PFC, so remove that check. Also, the
mapping of priorities to traffic classes should be done when configuring
the traffic classes and not the PFC support so move the priority to traffic
class association from xgbe_config_dcb_pfc to xgbe_config_dcb_tc.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently the PFC flow control is enabled on all traffic classes if
one or more traffic classes request it. The PFC enable setting of the
traffic class should be used to determine whether to enable or disable
flow control for the traffic class.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using ethtool to set the speed for the device, verify that the
specified speed is valid within the active speedset.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change from calling __napi_schedule to __napi_schedule_irqoff when running
in interrupt context or when called by netpoll with interrupts already
disabled. The Tx timer function will continue to use __napi_schedule.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Change from using napi_complete to napi_complete_done to allow for the
use of gro_flush_timeout in tuning network processing.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When the hardware is placed in promiscuous mode it will still perform
VLAN filtering and therefore may not pass all packets to the driver.

Disable all VLAN filtering when entering promiscuous mode and restore
VLAN filtering upon exit from promiscuous mode. In order to avoid adding
forward declarations, move the VLAN related functions earlier in the
file.
Signed-off-by: NTom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use IFF_NO_QUEUE to indicate that a device can run without a qdisc.
Signed-off-by: NZhang Shengju <zhangshengju@cmss.chinamobile.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This commit converts commit b499ffb0 ("i40e: Look up MAC address in
Open Firmware or IDPROM") to use eth_platform_get_mac_address()
added by commit c7f5d105 ("net: Add eth_platform_get_mac_address()
helper.")
Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com>
Tested-by: NAndrew Bowers <andrewx.bowers@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>