Skip to content

K
Kernel

openeuler / Kernel
接近 2 年 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 30 3月, 2021 1 次提交
    • R
      ACPI: tables: x86: Reserve memory occupied by ACPI tables · 1a1c130a
      由 Rafael J. Wysocki 提交于 
      The following problem has been reported by George Kennedy:

 Since commit 7fef431b ("mm/page_alloc: place pages to tail
 in __free_pages_core()") the following use after free occurs
 intermittently when ACPI tables are accessed.

 BUG: KASAN: use-after-free in ibft_init+0x134/0xc49
 Read of size 4 at addr ffff8880be453004 by task swapper/0/1
 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0de #1
 Call Trace:
  dump_stack+0xf6/0x158
  print_address_description.constprop.9+0x41/0x60
  kasan_report.cold.14+0x7b/0xd4
  __asan_report_load_n_noabort+0xf/0x20
  ibft_init+0x134/0xc49
  do_one_initcall+0xc4/0x3e0
  kernel_init_freeable+0x5af/0x66b
  kernel_init+0x16/0x1d0
  ret_from_fork+0x22/0x30

 ACPI tables mapped via kmap() do not have their mapped pages
 reserved and the pages can be "stolen" by the buddy allocator.

Apparently, on the affected system, the ACPI table in question is
not located in "reserved" memory, like ACPI NVS or ACPI Data, that
will not be used by the buddy allocator, so the memory occupied by
that table has to be explicitly reserved to prevent the buddy
allocator from using it.

In order to address this problem, rearrange the initialization of the
ACPI tables on x86 to locate the initial tables earlier and reserve
the memory occupied by them.

The other architectures using ACPI should not be affected by this
change.

Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/Reported-by: NGeorge Kennedy <george.kennedy@oracle.com>
Tested-by: NGeorge Kennedy <george.kennedy@oracle.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMike Rapoport <rppt@linux.ibm.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
      1a1c130a
  3. 08 3月, 2021 1 次提交
  5. 04 3月, 2021 1 次提交
  7. 12 2月, 2021 2 次提交
  9. 04 2月, 2021 1 次提交
    • M
      ACPI: Add support for native USB4 control _OSC · 5a6a2c0f
      由 Mika Westerberg 提交于 
      ACPI 6.4 introduced a new _OSC capability that is used negotiate native
connection manager support. Connection manager is the entity that is
responsible for tunneling over the USB4 fabric. If the platform rejects
the native access then firmware based connection manager is used.

The new _OSC also includes a set of bits that can be used to disable
certain tunnel types such as PCIe for security reasons for instance.

This implements the new USB4 _OSC so that we try to negotiate native
USB4 support if the Thunderbolt/USB4 (CONFIG_USB4) driver is enabled.
Drivers can determine what was negotiated by checking two new variables
exposed in this patch.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      5a6a2c0f
  11. 27 1月, 2021 1 次提交
  13. 08 1月, 2021 1 次提交
  15. 12 12月, 2020 1 次提交
  17. 26 10月, 2020 1 次提交
  19. 14 10月, 2020 1 次提交
    • D
      x86/numa: add 'nohmat' option · 3b0d3101
      由 Dan Williams 提交于 
      Disable parsing of the HMAT for debug, to workaround broken platform
instances, or cases where it is otherwise not wanted.

[rdunlap@infradead.org: fix build when CONFIG_ACPI is not set]
  Link: https://lkml.kernel.org/r/70e5ee34-9809-a997-7b49-499e4be61307@infradead.orgSigned-off-by: NDan Williams <dan.j.williams@intel.com>
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Brice Goglin <Brice.Goglin@inria.fr>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Dave Jiang <dave.jiang@intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: David Hildenbrand <david@redhat.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jason Gunthorpe <jgg@mellanox.com>
Cc: Jeff Moyer <jmoyer@redhat.com>
Cc: Jia He <justin.he@arm.com>
Cc: Joao Martins <joao.m.martins@oracle.com>
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Mike Rapoport <rppt@linux.ibm.com>
Cc: Paul Mackerras <paulus@ozlabs.org>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Vishal Verma <vishal.l.verma@intel.com>
Cc: Wei Yang <richard.weiyang@linux.alibaba.com>
Cc: Will Deacon <will@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Hulk Robot <hulkci@huawei.com>
Cc: Jason Yan <yanaijie@huawei.com>
Cc: "Jérôme Glisse" <jglisse@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Link: https://lkml.kernel.org/r/159643095540.4062302.732962081968036212.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      3b0d3101
  21. 03 10月, 2020 2 次提交
  23. 01 10月, 2020 1 次提交
  25. 25 9月, 2020 1 次提交
  27. 24 9月, 2020 2 次提交
  29. 28 7月, 2020 1 次提交
    • L
      ACPI/IORT: Add an input ID to acpi_dma_configure() · b8e069a2
      由 Lorenzo Pieralisi 提交于 
      Some HW devices are created as child devices of proprietary busses,
that have a bus specific policy defining how the child devices
wires representing the devices ID are translated into IOMMU and
IRQ controllers device IDs.

Current IORT code provides translations for:

- PCI devices, where the device ID is well identified at bus level
  as the requester ID (RID)
- Platform devices that are endpoint devices where the device ID is
  retrieved from the ACPI object IORT mappings (Named components single
  mappings). A platform device is represented in IORT as a named
  component node

For devices that are child devices of proprietary busses the IORT
firmware represents the bus node as a named component node in IORT
and it is up to that named component node to define in/out bus
specific ID translations for the bus child devices that are
allocated and created in a bus specific manner.

In order to make IORT ID translations available for proprietary
bus child devices, the current ACPI (and IORT) code must be
augmented to provide an additional ID parameter to acpi_dma_configure()
representing the child devices input ID. This ID is bus specific
and it is retrieved in bus specific code.

By adding an ID parameter to acpi_dma_configure(), the IORT
code can map the child device ID to an IOMMU stream ID through
the IORT named component representing the bus in/out ID mappings.
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: Robin Murphy <robin.murphy@arm.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Link: https://lore.kernel.org/r/20200619082013.13661-6-lorenzo.pieralisi@arm.comSigned-off-by: NCatalin Marinas <catalin.marinas@arm.com>
      b8e069a2
  31. 27 6月, 2020 2 次提交
  33. 05 4月, 2020 1 次提交
    • H
      ACPI: PM: Add acpi_[un]register_wakeup_handler() · ddfd9dcf
      由 Hans de Goede 提交于 
      Since commit fdde0ff8 ("ACPI: PM: s2idle: Prevent spurious SCIs from
waking up the system") the SCI triggering without there being a wakeup
cause recognized by the ACPI sleep code will no longer wakeup the system.

This works as intended, but this is a problem for devices where the SCI
is shared with another device which is also a wakeup source.

In the past these, from the pov of the ACPI sleep code, spurious SCIs
would still cause a wakeup so the wakeup from the device sharing the
interrupt would actually wakeup the system. This now no longer works.

This is a problem on e.g. Bay Trail-T and Cherry Trail devices where
some peripherals (typically the XHCI controller) can signal a
Power Management Event (PME) to the Power Management Controller (PMC)
to wakeup the system, this uses the same interrupt as the SCI.
These wakeups are handled through a special INT0002 ACPI device which
checks for events in the GPE0a_STS for this and takes care of acking
the PME so that the shared interrupt stops triggering.

The change to the ACPI sleep code to ignore the spurious SCI, causes
the system to no longer wakeup on these PME events. To make things
worse this means that the INT0002 device driver interrupt handler will
no longer run, causing the PME to not get cleared and resulting in the
system hanging. Trying to wakeup the system after such a PME through e.g.
the power button no longer works.

Add an acpi_register_wakeup_handler() function which registers
a handler to be called from acpi_s2idle_wake() and when the handler
returns true, return true from acpi_s2idle_wake().

The INT0002 driver will use this mechanism to check the GPE0a_STS
register from acpi_s2idle_wake() and to tell the system to wakeup
if a PME is signaled in the register.

Fixes: fdde0ff8 ("ACPI: PM: s2idle: Prevent spurious SCIs from waking up the system")
Cc: 5.4+ <stable@vger.kernel.org> # 5.4+
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      ddfd9dcf
  35. 29 3月, 2020 1 次提交
    • K
      PCI/DPC: Add Error Disconnect Recover (EDR) support · ac1c8e35
      由 Kuppuswamy Sathyanarayanan 提交于 
      Error Disconnect Recover (EDR) is a feature that allows ACPI firmware to
notify OSPM that a device has been disconnected due to an error condition
(ACPI v6.3, sec 5.6.6).  OSPM advertises its support for EDR on PCI devices
via _OSC (see [1], sec 4.5.1, table 4-4).  The OSPM EDR notify handler
should invalidate software state associated with disconnected devices and
may attempt to recover them.  OSPM communicates the status of recovery to
the firmware via _OST (sec 6.3.5.2).

For PCIe, firmware may use Downstream Port Containment (DPC) to support
EDR.  Per [1], sec 4.5.1, table 4-6, even if firmware has retained control
of DPC, OSPM may read/write DPC control and status registers during the EDR
notification processing window, i.e., from the time it receives an EDR
notification until it clears the DPC Trigger Status.

Note that per [1], sec 4.5.1 and 4.5.2.4,

  1. If the OS supports EDR, it should advertise that to firmware by
     setting OSC_PCI_EDR_SUPPORT in _OSC Support.

  2. If the OS sets OSC_PCI_EXPRESS_DPC_CONTROL in _OSC Control to request
     control of the DPC capability, it must also set OSC_PCI_EDR_SUPPORT in
     _OSC Support.

Add an EDR notify handler to attempt recovery.

[1] Downstream Port Containment Related Enhancements ECN, Jan 28, 2019,
    affecting PCI Firmware Specification, Rev. 3.2
    https://members.pcisig.com/wg/PCI-SIG/document/12888

[bhelgaas: squash add/enable patches into one]
Link: https://lore.kernel.org/r/90f91fe6d25c13f9d2255d2ce97ca15be307e1bb.1585000084.git.sathyanarayanan.kuppuswamy@linux.intel.comSigned-off-by: NKuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Len Brown <lenb@kernel.org>
      ac1c8e35
  37. 18 2月, 2020 1 次提交
  39. 27 12月, 2019 1 次提交
  41. 16 12月, 2019 1 次提交
    • R
      ACPI: processor: Export function to claim _CST control · bc946388
      由 Rafael J. Wysocki 提交于 
      The intel_idle driver will be modified to use ACPI _CST subsequently
and it will need to notify the platform firmware of that if
acpi_gbl_FADT.cst_control is set, so add a routine for this purpose,
acpi_processor_claim_cst_control(), to acpi_processor.c (so that it
is always present which is required by intel_idle) and export it
to allow the ACPI processor driver (which is modular) to call it.

No intentional functional impact.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      bc946388
  43. 15 10月, 2019 1 次提交
  45. 20 8月, 2019 1 次提交
    • J
      acpi: Ignore acpi_rsdp kernel param when the kernel has been locked down · 41fa1ee9
      由 Josh Boyer 提交于 
      This option allows userspace to pass the RSDP address to the kernel, which
makes it possible for a user to modify the workings of hardware. Reject
the option when the kernel is locked down. This requires some reworking
of the existing RSDP command line logic, since the early boot code also
makes use of a command-line passed RSDP when locating the SRAT table
before the lockdown code has been initialised. This is achieved by
separating the command line RSDP path in the early boot code from the
generic RSDP path, and then copying the command line RSDP into boot
params in the kernel proper if lockdown is not enabled. If lockdown is
enabled and an RSDP is provided on the command line, this will only be
used when parsing SRAT (which shouldn't permit kernel code execution)
and will be ignored in the rest of the kernel.

(Modified by Matthew Garrett in order to handle the early boot RSDP
environment)
Signed-off-by: NJosh Boyer <jwboyer@redhat.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
Signed-off-by: NMatthew Garrett <mjg59@google.com>
Reviewed-by: NKees Cook <keescook@chromium.org>
cc: Dave Young <dyoung@redhat.com>
cc: linux-acpi@vger.kernel.org
Signed-off-by: NJames Morris <jmorris@namei.org>
      41fa1ee9
  47. 12 8月, 2019 1 次提交
  49. 31 7月, 2019 1 次提交
  51. 30 7月, 2019 1 次提交
    • R
      ACPI: PM: Set up EC GPE for system wakeup from drivers that need it · 10a08fd6
      由 Rafael J. Wysocki 提交于 
      The EC GPE needs to be set up for system wakeup only if there is a
driver depending on it, either intel-hid or intel-vbtn, bound to a
button device that is expected to wake up the system from sleep (such
as the power button on some Dell systems, like the XPS13 9360).  It
doesn't need to be set up for waking up the system from sleep in any
other cases and whether or not it is expected to wake up the system
from sleep doesn't depend on whether or not the LPS0 device is
present in the ACPI namespace.

For this reason, rearrange the ACPI suspend-to-idle code to make the
drivers depending on the EC GPE wakeup take care of setting it up and
decouple that from the LPS0 device handling.

While at it, make intel-hid and intel-vbtn prepare for system wakeup
only if they are allowed to wake up the system from sleep by user
space (via sysfs).

[Note that acpi_ec_mark_gpe_for_wake() and acpi_ec_set_gpe_wake_mask()
 are there to prevent the EC GPE from being disabled by the
 acpi_enable_all_wakeup_gpes() call in acpi_s2idle_prepare(), so on
 systems with either intel-hid or intel-vbtn this change doesn't
 affect any interactions with the hardware or platform firmware.]
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NAndy Shevchenko <andy.shevchenko@gmail.com>
      10a08fd6
  53. 15 7月, 2019 1 次提交
    • A
      ACPI: fix false-positive -Wuninitialized warning · dfd6f9ad
      由 Arnd Bergmann 提交于 
      clang gets confused by an uninitialized variable in what looks
to it like a never executed code path:

arch/x86/kernel/acpi/boot.c:618:13: error: variable 'polarity' is uninitialized when used here [-Werror,-Wuninitialized]
        polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
                   ^~~~~~~~
arch/x86/kernel/acpi/boot.c:606:32: note: initialize the variable 'polarity' to silence this warning
        int rc, irq, trigger, polarity;
                                      ^
                                       = 0
arch/x86/kernel/acpi/boot.c:617:12: error: variable 'trigger' is uninitialized when used here [-Werror,-Wuninitialized]
        trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
                  ^~~~~~~
arch/x86/kernel/acpi/boot.c:606:22: note: initialize the variable 'trigger' to silence this warning
        int rc, irq, trigger, polarity;
                            ^
                             = 0

This is unfortunately a design decision in clang and won't be fixed.

Changing the acpi_get_override_irq() macro to an inline function
reliably avoids the issue.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Reviewed-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NNathan Chancellor <natechancellor@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      dfd6f9ad
  55. 03 7月, 2019 3 次提交
  57. 27 6月, 2019 1 次提交
  59. 17 6月, 2019 1 次提交
    • Y
      platform/x86: wmi: Add function to get _UID of WMI device · e7488e58
      由 Yurii Pavlovskyi 提交于 
      Add a new function to acpi.h / wmi.c that returns _UID of the ACPI WMI
device. For example, it returns "ATK" for the following declaration in
DSDT:
Device (ATKD)
{
    Name (_HID, "PNP0C14" /* Windows Management Instrumentation Device */)
      // _HID: Hardware ID
    Name (_UID, "ATK")  // _UID: Unique ID
    ..

Generally, it is possible that multiple PNP0C14 ACPI devices are present in
the system as mentioned in the commit message of commit bff431e4
("ACPI: WMI: Add ACPI-WMI mapping driver").

Therefore the _UID is returned for a specific ACPI device that declares the
given GUID, to which it is also mapped by other methods of wmi module.
Signed-off-by: NYurii Pavlovskyi <yurii.pavlovskyi@gmail.com>
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      e7488e58
  61. 31 5月, 2019 1 次提交
    • T
      treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 · c942fddf
      由 Thomas Gleixner 提交于 
      Based on 3 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version this program is distributed in the
  hope that it will be useful but without any warranty without even
  the implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [kishon] [vijay] [abraham]
  [i] [kishon]@[ti] [com] this program is distributed in the hope that
  it will be useful but without any warranty without even the implied
  warranty of merchantability or fitness for a particular purpose see
  the gnu general public license for more details

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license as published by
  the free software foundation either version 2 of the license or at
  your option any later version [author] [graeme] [gregory]
  [gg]@[slimlogic] [co] [uk] [author] [kishon] [vijay] [abraham] [i]
  [kishon]@[ti] [com] [based] [on] [twl6030]_[usb] [c] [author] [hema]
  [hk] [hemahk]@[ti] [com] this program is distributed in the hope
  that it will be useful but without any warranty without even the
  implied warranty of merchantability or fitness for a particular
  purpose see the gnu general public license for more details

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-or-later

has been chosen to replace the boilerplate/reference in 1105 file(s).
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Reviewed-by: NAllison Randal <allison@lohutok.net>
Reviewed-by: NRichard Fontana <rfontana@redhat.com>
Reviewed-by: NKate Stewart <kstewart@linuxfoundation.org>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190527070033.202006027@linutronix.deSigned-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c942fddf
  63. 28 5月, 2019 1 次提交
    • A
      acpi/irq: Implement helper to create hierachical domains · 621dc2fd
      由 Ard Biesheuvel 提交于 
      ACPI permits arbitrary producer->consumer interrupt links to be
described in AML, which means a topology such as the following
is perfectly legal:

  Device (EXIU) {
    Name (_HID, "SCX0008")
    Name (_UID, Zero)
    Name (_CRS, ResourceTemplate () {
      ...
    })
  }

  Device (GPIO) {
    Name (_HID, "SCX0007")
    Name (_UID, Zero)
    Name (_CRS, ResourceTemplate () {
      Memory32Fixed (ReadWrite, SYNQUACER_GPIO_BASE, SYNQUACER_GPIO_SIZE)
      Interrupt (ResourceConsumer, Edge, ActiveHigh, ExclusiveAndWake, 0, "\\_SB.EXIU") {
        7,
      }
    })
    ...
  }

The EXIU in this example is the external interrupt unit as can be found
on Socionext SynQuacer based platforms, which converts a block of 32 SPIs
from arbitrary polarity/trigger into level-high, with a separate set
of config/mask/unmask/clear controls.

The existing DT based driver in drivers/irqchip/irq-sni-exiu.c models
this as a hierarchical domain stacked on top of the GIC's irqdomain.
Since the GIC is modeled as a DT node as well, obtaining a reference
to this irqdomain is easily done by going through the parent link.

On ACPI systems, however, the GIC is not modeled as an object in the
namespace, and so device objects cannot refer to it directly. So in
order to obtain the irqdomain reference when driving the EXIU in ACPI
mode, we need a helper that implicitly grabs the default domain as the
parent of the hierarchy for interrupts allocated out of the global GSI
pool.
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NArd Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
      621dc2fd
  65. 24 4月, 2019 1 次提交
  67. 23 4月, 2019 1 次提交