This patch is an attempt to limit HDMI 2.0 SCDC setup when :
- the SoC embeds an HDMI 1.4 only controller
- the EDID supports SCDC but not scrambling
- the EDID supports SCDC scrambling but not for low TMDS bit rates,
  while only supporting low TMDS bit rates

This to avoid communicating with the SCDC DDC slave uncessary, and
setting the DW-HDMI TMDS Scrambler setup when not supported by the
underlying hardware.
Reported-by: NRob Herring <robh@kernel.org>
Fixes: 264fce6c ("drm/bridge: dw-hdmi: Add SCDC and TMDS Scrambling support")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NRob Herring <robh@kernel.org>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190315095414.28520-1-narmstrong@baylibre.com

In order to support the HDMI2.0 YUV420 display modes, this patch
adds support for the YUV420 TMDS Clock divided by 2 and the controller
passthrough mode.

YUV420 Synopsys PHY support will need some specific configuration table
to support theses modes.

This patch is based on work from Zheng Yang <zhengyang@rock-chips.com> in
the Rockchip Linux 4.4 BSP at [1]

[1] https://github.com/rockchip-linux/kernel/tree/release-4.4

Cc: Zheng Yang <zhengyang@rock-chips.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-5-git-send-email-narmstrong@baylibre.com

Add support for SCDC Setup for TMDS Clock > 3.4GHz and enable TMDS
Scrambling when supported or mandatory.

This patch also adds an helper to setup the control bit to support
the high TMDS Bit Period/TMDS Clock-Period Ratio as required with
TMDS Clock > 3.4GHz for HDMI2.0 3840x2160@60/50 modes.

These changes were based on work done by Huicong Xu <xhc@rock-chips.com>
and Nickey Yang <nickey.yang@rock-chips.com> to support HDMI2.0 modes
on the Rockchip 4.4 BSP kernel at [1]

[1] https://github.com/rockchip-linux/kernel/tree/release-4.4

Cc: Nickey Yang <nickey.yang@rock-chips.com>
Cc: Huicong Xu <xhc@rock-chips.com>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1549022873-40549-2-git-send-email-narmstrong@baylibre.com

Having the probe helper stuff (which pretty much everyone needs) in
the drm_crtc_helper.h file (which atomic drivers should never need) is
confusing. Split them out.

To make sure I actually achieved the goal here I went through all
drivers. And indeed, all atomic drivers are now free of
drm_crtc_helper.h includes.

v2: Make it compile. There was so much compile fail on arm drivers
that I figured I'll better not include any of the acks on v1.

v3: Massive rebase because i915 has lost a lot of drmP.h includes, but
not all: Through drm_crtc_helper.h > drm_modeset_helper.h -> drmP.h
there was still one, which this patch largely removes. Which means
rolling out lots more includes all over.

This will also conflict with ongoing drmP.h cleanup by others I
expect.

v3: Rebase on top of atomic bochs.

v4: Review from Laurent for bridge/rcar/omap/shmob/core bits:
- (re)move some of the added includes, use the better include files in
  other places (all suggested from Laurent adopted unchanged).
- sort alphabetically

v5: Actually try to sort them, and while at it, sort all the ones I
touch.

v6: Rebase onto i915 changes.

v7: Rebase once more.
Acked-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NRodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: NBenjamin Gaignard <benjamin.gaignard@linaro.org>
Acked-by: NJani Nikula <jani.nikula@intel.com>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Acked-by: NOleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: NCK Hu <ck.hu@mediatek.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NLiviu Dudau <liviu.dudau@arm.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: virtualization@lists.linux-foundation.org
Cc: etnaviv@lists.freedesktop.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: intel-gfx@lists.freedesktop.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-amlogic@lists.infradead.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: spice-devel@lists.freedesktop.org
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-tegra@vger.kernel.org
Cc: xen-devel@lists.xen.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190117210334.13234-1-daniel.vetter@ffwll.ch

The call of snd_pcm_suspend_all() & co became superfluous since we
call it in the PCM PM ops.  Let's remove them.
Reviewed-by: NJaroslav Kysela <perex@perex.cz>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

The mode and ajusted_mode passed to the bridge .mode_set() operation
should never be modified by the bridge (and are not in any of the
existing bridge drivers). Make them const to make this clear.
Signed-off-by: NLaurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>

Make life easier for drivers by simply passing the connector
to drm_hdmi_avi_infoframe_from_display_mode() and
drm_hdmi_avi_infoframe_quant_range(). That way drivers don't
need to worry about is_hdmi2_sink mess.

v2: Make is_hdmi2_sink() return true for sil-sii8620
    Adapt to omap/vc4 changes

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Sandy Huang <hjc@rock-chips.com>
Cc: "Heiko Stübner" <heiko@sntech.de>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Shawn Guo <shawnguo@kernel.org>
Cc: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: amd-gfx@lists.freedesktop.org
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: nouveau@lists.freedesktop.org
Cc: linux-tegra@vger.kernel.org
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Acked-by: NRussell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108172828.15184-1-ville.syrjala@linux.intel.com

drmP.h is an relic from the days when there was a single header file.
To enable the removal of drmP.h from all users drop include
of drmP.h from bridge/dw_hdmi.h.

A few files relied on the file included in drmP.h - add explicit
include statements or forward declarations to these files.
Build tested with arm and x86.

v2:
- prefer forward declarations when possible (Laurent Pinchart)
- sort include files (Laurent Pinchart)
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190108192939.15255-7-sam@ravnborg.org

This patch updates license to use SPDX-License-Identifier
instead of verbose license text.
Signed-off-by: NKuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87lg4n1izg.wl-kuninori.morimoto.gx@renesas.com

It turns out that even new DW HDMI controllers exhibits same magenta
line issues as older versions.

Enable workaround for v2.12a.
Reviewed-by: NChen-Yu Tsai <wens@csie.org>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181104182705.18047-15-jernej.skrabec@siol.net

Allow to also drive a slave dw-mipi-dsi controller in a dual-dsi
setup. This will require additional implementation-specific
code to look up the slave instance and do specific setup.
Also will probably need code in the specific crtcs as dual-dsi
does not equal two separate dsi outputs.

To activate, the implementation-specific code should set the slave
using dw_mipi_dsi_set_slave() before calling __dw_mipi_dsi_bind().

v2:
- expect real interface number of lanes
- keep links to both master and slave
v3:
- remove unneeded separate variables
- remove unneeded second slave settings
- disable slave before master
- lane-sum calculation comments
Signed-off-by: NNickey Yang <nickey.yang@rock-chips.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-7-heiko@sntech.de

With the regular means of adding the dsi-component in probe it creates
a race condition with the panel probing, as the panel device only gets
created after the dsi-bus got created.

When the panel-driver is build as a module it currently fails hard as the
panel cannot be probed directly:

dw_mipi_dsi_bind()
  __dw_mipi_dsi_probe()
    creates dsi bus
    creates panel device
    triggers panel module load
    panel not probed (module not loaded or panel probe slow)
  drm_bridge_attach
    fails with -EINVAL due to empty panel_bridge

Additionally the panel probing can run concurrently with dsi bringup
making it possible that the panel can already be found but dsi-attach
hasn't finished running.

To solve that cleanly we may want to only create the component after
the panel has finished probing, by calling component_add from the
host-attach dsi callback.

As that is specific to glue drivers, add a new struct for host_ops
so that glue drivers can tell the bridge to call specific functions
after the common host-attach and before the common host-detach run.
Suggested-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-4-heiko@sntech.de

__dw_mipi_dsi_probe() does all the grabbing of resources and does it using
devm-helpers. So this is happening on each try of master bringup possibly
slowing down things a lot.

Drivers using the component framework may instead want to call
dw_mipi_dsi_probe separately in their probe function to setup resources
early. That way the dsi bus also gets created earlier and also not
recreated on each bind-try, so that attached panels can load their modules
and be probed way before the bridge-attach in the bind call.

So drop the call to __dw_mipi_dsi_probe and modify the function to take
a struct dw_mipi_dsi instead of the platform-device.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-3-heiko@sntech.de

Right now the host is only unregistered when the driver is used via the
bridge api and not via the component api, leading to the host staying
registered in cases like probe deferral.

So move the host unregister to the general remove function, so that it
gets cleaned up in all cases.
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181001123845.11818-2-heiko@sntech.de

It's the default. The exported version was kinda a transition state,
before we made this the default.

To stop new atomic drivers from using it (instead of just relying on
the default) let's unexport it.

v2: rename the default implementation to a more fitting name and add a
comment (Laurent)
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Gustavo Padovan <gustavo@padovan.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: David Airlie <airlied@linux.ie>
Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Sinclair Yeh <syeh@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Neil Armstrong <narmstrong@baylibre.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Hans Verkuil <hverkuil@xs4all.nl>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Pierre-Hugues Husson <phh@phh.me>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181004202446.22905-3-daniel.vetter@ffwll.ch

In some IP implementations the reading of the phy-type may be broken.
One example are the Rockchip rk3228 and rk3328 socs that use a separate
vendor-type phy from Innosilicon but still report the HDMI20_TX type.

So allow the glue driver to force the vendor-phy for these cases.
In the future it may be necessary to allow forcing other types, but
for now we'll keep it simply to the case actually seen in the wild.

changes in v3:
- only allow forcing vendor type, as suggested by Laurent
Signed-off-by: NHeiko Stuebner <heiko@sntech.de>
Tested-by: NRobin Murphy <robin.murphy@arm.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NZheng Yang <zhengyang@rock-chips.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-2-heiko@sntech.de
Link: https://patchwork.freedesktop.org/patch/msgid/20180912124740.20343-3-heiko@sntech.de

Please do not comment out unneeded code.  Remove.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1532496348-11589-1-git-send-email-yamada.masahiro@socionext.com

Again to align with the usual prefix of just drm_connector_. Again
done with sed + manual fixup for indent issues.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch

Just makes it longer, and for most things in drm_connector.[hc] we
just use the drm_connector_ prefix. Done with sed + a bit of manual
fixup for the indenting.
Reviewed-by: NSean Paul <seanpaul@chromium.org>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch

The dw_hdmi_setup_rx_sense exported function should not use struct device
to recover the dw-hdmi context using drvdata, but take struct dw_hdmi
directly like other exported functions.

This caused a regression using Meson DRM on S905X since v4.17-rc1 :

Internal error: Oops: 96000007 [#1] PREEMPT SMP
[...]
CPU: 0 PID: 124 Comm: irq/32-dw_hdmi_ Not tainted 4.17.0-rc7 #2
Hardware name: Libre Technology CC (DT)
[...]
pc : osq_lock+0x54/0x188
lr : __mutex_lock.isra.0+0x74/0x530
[...]
Process irq/32-dw_hdmi_ (pid: 124, stack limit = 0x00000000adf418cb)
Call trace:
  osq_lock+0x54/0x188
  __mutex_lock_slowpath+0x10/0x18
  mutex_lock+0x30/0x38
  __dw_hdmi_setup_rx_sense+0x28/0x98
  dw_hdmi_setup_rx_sense+0x10/0x18
  dw_hdmi_top_thread_irq+0x2c/0x50
  irq_thread_fn+0x28/0x68
  irq_thread+0x10c/0x1a0
  kthread+0x128/0x130
  ret_from_fork+0x10/0x18
 Code: 34000964 d00050a2 51000484 9135c042 (f864d844)
 ---[ end trace 945641e1fbbc07da ]---
 note: irq/32-dw_hdmi_[124] exited with preempt_count 1
 genirq: exiting task "irq/32-dw_hdmi_" (124) is an active IRQ thread (irq 32)

Fixes: eea034af ("drm/bridge/synopsys: dw-hdmi: don't clobber drvdata")
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Tested-by: NKoen Kooi <koen@dominion.thruhere.net>
Signed-off-by: NSean Paul <seanpaul@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1527673438-20643-1-git-send-email-narmstrong@baylibre.com

The "adjusted_mode" clock value (ie the real pixel clock) is more
accurate than "mode" clock value (ie the panel/bridge requested
clock value). It offers a better preciseness for timing
computations and allows to reduce the extra dsi bandwidth in
burst mode (from ~20% to ~10-12%, hw platform dependent).
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NYannick Fertré <yannick.fertre@st.com>
Tested-by: NYannick Fertré <yannick.fertre@st.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125155504.8611-1-philippe.cornu@st.com

platform_driver does not need to set the owner field, as this will
be populated by the driver core.

Generated by scripts/coccinelle/api/platform_no_drv_owner.cocci.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1521137057-14773-1-git-send-email-festevam@gmail.com

Add SPDX identifiers to the Synopsys DesignWare MIPI DSI
host controller driver.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Acked-by: NPhilippe Ombredanne <pombredanne@nexB.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180208145805.24762-1-philippe.cornu@st.com

The cable_plugin member never receives an assignment, so it is always
false, which causes hdmi_enable_overflow_interrupts() to never
be called as per the logic below:

	if (hdmi->cable_plugin && hdmi->sink_is_hdmi)
		hdmi_enable_overflow_interrupts(hdmi);

This has been the case since the driver was originally introduced
in commit 9aaf880e ("imx-drm: Add mx6 hdmi transmitter support").

Remove the cable_plugin element and the hdmi_enable_overflow_interrupts()
function that is never called.
Signed-off-by: NFabio Estevam <fabio.estevam@nxp.com>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # On R-Car H3
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1518812170-22687-1-git-send-email-festevam@gmail.com

The Amlogic Meson GX SoCs, embedded the v2.01a controller, has been also
identified needing this workaround.
This patch adds the corresponding version to enable a single iteration for
this specific version.

Fixes: be41fc55 ("drm: bridge: dw-hdmi: Handle overflow workaround based on device version")
Acked-by: NArchit Taneja <architt@codeaurora.org>
[narmstrong: s/identifies/identified and rebased against Jernej's change]
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1519386277-25902-1-git-send-email-narmstrong@baylibre.com

The readl_poll_timeout() return value is 0 in case of success
so it is better to detect errors without taking care of the
return value sign.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180204213624.18288-1-philippe.cornu@st.com

dw_hdmi shouldn't set drvdata since some drivers might need to store
it's own data there. Rework dw_hdmi in a way to return struct dw_hdmi
instead to store it in drvdata. This way drivers are responsible to
store and pass structure when needed.

Idea was taken from the following commit:
8242ecbd ("drm/bridge/synopsys: stop clobbering drvdata")

Cc: p.zabel@pengutronix.de
Cc: Laurent.pinchart@ideasonboard.com
Cc: hjc@rock-chips.com
Acked-by: NHeiko Stuebner <heiko@sntech.de>
Acked-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
Tested-by: NHeiko Stuebner <heiko@sntech.de>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-6-jernej.skrabec@siol.net

Parts of PHY code could be useful also for custom PHYs. For example,
Allwinner A83T has custom PHY which is probably Synopsys gen2 PHY
with few additional memory mapped registers, so most of the Synopsys PHY
related code could be reused.

Functions exported here are actually not specific to Synopsys PHYs but
to DWC HDMI controller PHY interface. This means that even if the PHY is
completely custom, i.e. not designed by Synopsys, exported functions can
be useful.
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
Reviewed-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-5-jernej.skrabec@siol.net

Allwinner SoCs have dw hdmi controller v1.32a which exhibits same
magenta line issue as i.MX6Q and i.MX6DL. Enable workaround for it.

Tests show that one iteration is enough.
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
Signed-off-by: NJernej Skrabec <jernej.skrabec@siol.net>
Signed-off-by: NMaxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180214200906.31509-4-jernej.skrabec@siol.net

Add support for the Synopsys DesignWare MIPI DSI version 1.31
Two registers need to be updated/added for supporting 1.31:
* PHY_TMR_CFG 0x9c (updated)
  1.30 [31:24] phy_hs2lp_time
       [23:16] phy_lp2hs_time
       [14: 0] max_rd_time

  1.31 [25:16] phy_hs2lp_time
       [ 9: 0] phy_lp2hs_time

* PHY_TMR_RD_CFG 0xf4 (new)
  1.31 [14: 0] max_rd_time
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180206084251.303-1-philippe.cornu@st.com

This patch adds the DCS/GENERIC DSI read feature.
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180204213104.17834-1-philippe.cornu@st.com

The dw_mipi_dsi_host_transfer() must return the number of
bytes transmitted/received on success instead of 0.
Note: As the read feature is not implemented, only the
transmitted number of bytes is returned for the moment.
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-3-philippe.cornu@st.com

The dcs/generic dsi read feature is not yet implemented so it
is important to warn the host_transfer() caller in case of
read operation requests.
Reviewed-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180125103800.1999-2-philippe.cornu@st.com

We're filling the "remainder" word with little-endian data, then writing
it out to IO registers with endian-correcting writel(). That probably
won't work on big-endian systems.

Let's mark the "remainder" variable as LE32 (since we fill it with
memcpy()) and do the swapping explicitly.

Some of this function could be done more easily without memcpy(), but
the unaligned "remainder" case is a little hard to do without
potentially overrunning 'tx_buf', so I just applied the same solution in
all cases (memcpy() + le32_to_cpu()).

Tested only on a little-endian system.
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NAndrzej Hajda <a.hajda@samsung.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-2-briannorris@chromium.org

This takes care of 2 TODOs in this driver, by using the common DSI
packet-marshalling code instead of our custom short/long write code.
This both saves us some duplicated code and gets us free support for
command types that weren't already part of our switch block (e.g.,
MIPI_DSI_GENERIC_LONG_WRITE).

The code logic stays mostly intact, except that it becomes unnecessary
to split the short/long write functions, and we have to copy data a bit
more.

Along the way, I noticed that loop bounds were a little odd:

	while (DIV_ROUND_UP(len, pld_data_bytes))

This really was just supposed to be 'len != 0', so I made that more
clear.

Tested on RK3399 with some pending refactoring patches by Nickey Yang,
to make the Rockchip DSI driver wrap this common driver.
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NPhilippe Cornu <philippe.cornu@st.com>
Tested-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203248.139249-1-briannorris@chromium.org

sparse complains:

drivers/gpu/drm/bridge/synopsys/dw-mipi-dsi.c:703:6: warning: symbol
'dw_mipi_dsi_bridge_mode_set' was not declared. Should it be static?
Reviewed-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180109203319.139520-1-briannorris@chromium.org

Bridge drivers/helpers shouldn't be clobbering the drvdata, since a
parent driver might need to own this. Instead, let's return our
'dw_mipi_dsi' object and have callers pass that back to us for removal.
Signed-off-by: NBrian Norris <briannorris@chromium.org>
Reviewed-by: NMatthias Kaehlcke <mka@chromium.org>
Reviewed-by: NArchit Taneja <architt@codeaurora.org>
Acked-by: NPhilippe Cornu <philippe.cornu@st.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171128010538.119114-1-briannorris@chromium.org

Support the "cec" optional clock. The documentation already mentions "cec"
optional clock and it is used by several boards, but currently the driver
doesn't enable it, thus preventing cec from working on those boards.

And even worse: a /dev/cecX device will appear for those boards, but it
won't be functioning without configuring this clock.

Changes:
v4:
- Change commit message to stress the importance of this patch

v3:
- Drop useless braces

v2:
- Separate ENOENT errors from others
- Propagate other errors (especially -EPROBE_DEFER)
Signed-off-by: NPierre-Hugues Husson <phh@phh.me>
Signed-off-by: NArchit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20171125201844.11353-1-phh@phh.me

Appedix F of HDMI 2.0 says that some HDMI sink may fail to switch from
3D to 2D mode in a timely fashion if the source simply stops sending the
HDMI infoframe. The suggested workaround is to keep sending the
infoframe even when strictly not necessary (ie. no VIC and no S3D).
HDMI 1.4 does allow for this behaviour, stating that sending the
infoframe is optional in this case.

The infoframe was first specified in HDMI 1.4, so in theory sinks
predating that may not appreciate us sending an uknown infoframe
their way. To avoid regressions let's try to determine if the sink
supports the infoframe or not. Unfortunately there's no direct way
to do that, so instead we'll just check if we managed to parse any
HDMI 1.4 4k or stereo modes from the EDID, and if so we assume the
sink will accept the infoframe. Also if the EDID contains the HDMI
2.0 HDMI Forum VSDB we can assume the sink is prepared to receive
the infoframe.

v2: Fix getting has_hdmi_infoframe from display_info
    Always fail constructing the infoframe if the display
    possibly can't handle it

Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NShashank Sharma <shashank.sharma@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171113170427.4150-3-ville.syrjala@linux.intel.com

drm_add_edid_modes() now fills in the ELD automatically, so the calls to
drm_edid_to_eld() are redundant. Remove them.

All the other places are obvious, but nv50 has detached
drm_edid_to_eld() from the drm_add_edid_modes() call.

Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: CK Hu <ck.hu@mediatek.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Mark Yao <mark.yao@rock-chips.com>
Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Cc: Vincent Abriou <vincent.abriou@st.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Eric Anholt <eric@anholt.net>
Acked-by: NEric Anholt <eric@anholt.net>
Acked-by: NArchit Taneja <architt@codeaurora.org>
Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0959ca02b983afc9e74dd9acd190ba6e25f21678.1509545641.git.jani.nikula@intel.com