- 27 11月, 2007 7 次提交
-
-
由 Chuck Lever 提交于
Add helpers that iterate over multi-segment iovecs. These will be used to support multi-segment scatter/gather direct I/O in a later patch. Signed-off-by: NChuck Lever <cel@netapp.com> Signed-off-by: NChuck Lever <chuck.lever@oracle.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Joe Perches 提交于
Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Adrian Bunk 提交于
xs_setup_{udp,tcp}() can now become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Adrian Bunk 提交于
Every file should include the headers containing the prototypes for its global functions (in this case nfs_access_cache_shrinker()). Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Adrian Bunk 提交于
nfs_wb_page_priority() can now become static. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: Trond Myklebust <trond.myklebust@fys.uio.no> Cc: "J. Bruce Fields" <bfields@fieldses.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Russell King 提交于
While testing a kernel based upon ecd744ee (with wrong boot arguments), I got the following bad page state entry while NFS was trying to mount it's rootfs: IP-Config: Complete: device=eth0, addr=192.168.1.101, mask=255.255.255.0, gw=255.255.255.255, host=192.168.1.101, domain=, nis-domain=(none), bootserver=192.168.1.100, rootserver=192.168.1.100, rootpath= Looking up port of RPC 100003/2 on 192.168.1.100 rpcbind: server 192.168.1.100 not responding, timed out Root-NFS: Unable to get nfsd port number from server, using default Looking up port of RPC 100005/1 on 192.168.1.100 rpcbind: server 192.168.1.100 not responding, timed out Root-NFS: Unable to get mountd port number from server, using default mount: server 192.168.1.100 not responding, timed out Root-NFS: Server returned error -5 while mounting /nfs/rootfs/ VFS: Unable to mount root fs via NFS, trying floppy. Bad page state in process 'swapper' page:c02b1260 flags:0x00000400 mapping:00000000 mapcount:0 count:0 Trying to fix it up, but a reboot is needed Backtrace: [<c0023e34>] (dump_stack+0x0/0x14) from [<c0062570>] (bad_page+0x70/0xac) [<c0062500>] (bad_page+0x0/0xac) from [<c0064914>] (free_hot_cold_page+0x80/0x178) [<c0064894>] (free_hot_cold_page+0x0/0x178) from [<c0064a74>] (free_hot_page+0x14/0x18) [<c0064a60>] (free_hot_page+0x0/0x18) from [<c0067078>] (put_page+0xf8/0x154) [<c0066f80>] (put_page+0x0/0x154) from [<c007dbc8>] (kfree+0xc8/0xd0) [<c007db00>] (kfree+0x0/0xd0) from [<c00cbb54>] (nfs_get_sb+0x230/0x710) [<c00cb924>] (nfs_get_sb+0x0/0x710) from [<c0084334>] (vfs_kern_mount+0x58/0xac)[<c00842dc>] (vfs_kern_mount+0x0/0xac) from [<c00843c0>] (do_kern_mount+0x38/0xf4) [<c0084388>] (do_kern_mount+0x0/0xf4) from [<c0099c7c>] (do_mount+0x1e8/0x614) ... This seems to be caused by use of an uninitialised structure due to NULL options being passed to nfs_validate_mount_data(). Ensure that the parsed mount data is always initialised. Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk> (Trond: added fix for the same bug in nfs4_validate_mount_data()). Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 James Lentini 提交于
Support for binary sysctls is being deprecated in 2.6.24. Since there are no applications using the NFS/RDMA client's binary sysctls, it makes sense to remove them. The patch below does this while leaving the /proc/sys interface unchanged. Please consider this for 2.6.24. Signed-off-by: NJames Lentini <jlentini@netapp.com> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
- 18 11月, 2007 8 次提交
-
-
由 Neil Brown 提交于
Hi Trond, I have discovered that the BUG_ON in nfs_follow_mountpoint: BUG_ON(IS_ROOT(dentry)); can be triggered by a misbehaving server. What happens is the client does a lookup and discoveres that the named directory has a different fsid, so it initiates a mount. It then performs a GETATTR on the mounted directory and gets a different fsid again (due to a bug in the NFS server). This causes nfs_follow_mountpoint to be called on the newly mounted root, which triggers the BUG_ON. To duplicate this, have a directory which contains some mountpoints, and export that directory with the "crossmnt" flag using nfs-utils 1.1.1 (or 1.1.0 I think) The GETATTR on the root of the mounted filesystem will return the information for the top exportpoint, while a lookup will return the correct information. This difference causes the NFS client to BUG. I think the best way to fix this is to trap this possibility early, so just before completing the mount in the NFS client, check that it isn't going to use nfs_mountpoint_inode_operations. As long as i_op will never change once set (is that true?), this should be adequately safe. The following patch shows a possible approach, and it works for me. i.e. when the NFS server is misbehaving, I get ESTALE on those mountpoints, while when the NFS server is working correctly, I get correct behaviour on the client. NeilBrown Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 J. Bruce Fields 提交于
Pipe messages start out life on a queue on the inode, but when first read they're moved to the filp's private pointer. So it's possible for a poll here to return null even though there's a partially read message available. Signed-off-by: NJ. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Kevin Coffman 提交于
Return an error from gss_import_sec_context_kerberos if the negotiated context contains encryption or checksum types not supported by the kernel code. This fixes an Oops because success was assumed and later code found no internal_ctx_id. Signed-off-by: NKevin Coffman <kwc@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Kevin Coffman 提交于
Instead of mapping all errors except EACCES to EAGAIN, map all errors except EAGAIN to EACCES. An example is user-land negotiating a Kerberos context with an encryption type that is not supported by the kernel code. (This can happen due to mis-configuration or a bug in the Kerberos code that does not honor our request to limit the encryption types negotiated.) This failure is not transient, and returning EAGAIN causes mount to continuously retry rather than giving up. Signed-off-by: NKevin Coffman <kwc@citi.umich.edu> Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
由 Trond Myklebust 提交于
Since 2.6.18, the superblock sb->s_root has been a dummy dentry with a dummy inode. This breaks ustat(), which actually uses sb->s_root in a vfstat() call. Fix this by making the s_root a dummy alias to the directory inode that was used when creating the superblock. Signed-off-by: NTrond Myklebust <Trond.Myklebust@netapp.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86由 Linus Torvalds 提交于
* 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86: x86: simplify "make ARCH=x86" and fix kconfig all.config x86: reboot fixup for wrap2c board x86: check boundary in count setup resource x86: fix reboot with no keyboard attached x86: add hpet sanity checks x86: on x86_64, correct reading of PC RTC when update in progress in time_64.c x86: fix freeze in x86_64 RTC update code in time_64.c ntp: fix typo that makes sync_cmos_clock erratic Remove x86 merge artifact from top Makefile x86: fixup cpu_info array conversion x86: show cpuinfo only for online CPUs x86: fix cpu-hotplug regression x86: ignore the sys_getcpu() tcache parameter x86: voyager use correct header file name x86: fix smp init sections x86: fix voyager_cat_init section x86: fix bogus memcpy in es7000_check_dsdt()
-
由 Sam Ravnborg 提交于
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: - 0f855aa6 ("kconfig: add helper to set config symbol from environment variable") - 2a113281 ("kconfig: use $K64BIT to set 64BIT with all*config targets") Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Sam Ravnborg 提交于
Simplify "make ARCH=x86" and fix kconfig so we again can set 64BIT in all.config. For a fix the diffstat is nice: 6 files changed, 3 insertions(+), 36 deletions(-) The patch reverts these commits: 0f855aa6 -> kconfig: add helper to set config symbol from environment variable 2a113281 -> kconfig: use $K64BIT to set 64BIT with all*config targets Roman Zippel pointed out that kconfig supported string compares so the additional complexity introduced by the above two patches were not needed. With this patch we have following behaviour: # make {allno,allyes,allmod,rand}config [ARCH=...] option \ host arch | 32bit | 64bit ===================================================== ./. | 32bit | 64bit ARCH=x86 | 32bit | 32bit ARCH=i386 | 32bit | 32bit ARCH=x86_64 | 64bit | 64bit The general rule are that ARCH= and native architecture takes precedence over the configuration. So make ARCH=i386 [whatever] will always build a 32-bit kernel no matter what the configuration says. The configuration will be updated to 32-bit if it was configured to 64-bit and the other way around. This behaviour is consistent with previous behaviour so no suprises here. make ARCH=x86 will per default result in a 32-bit kernel but as the only ARCH= value x86 allow the user to select between 32-bit and 64-bit using menuconfig. Signed-off-by: NSam Ravnborg <sam@ravnborg.org> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Andreas Herrmann <aherrman@arcor.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com>
-
- 17 11月, 2007 22 次提交
-
-
由 Denys 提交于
Needed to make the wireless board, WRAP2C reboot. Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Yinghai Lu 提交于
need to check info->res_num less than PCI_BUS_NUM_RESOURCES, so info->bus->resource[info->res_num] = res will not beyond of bus resource array when acpi returns too many resource entries. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Gary Hade <gary.hade@us.ibm.com> Cc: Len Brown <lenb@kernel.org> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Truxton Fulton 提交于
Attempt to fix http://bugzilla.kernel.org/show_bug.cgi?id=8378 Hiroto Shibuya wrote to tell me that he has a VIA EPIA-EK10000 which suffers from the reboot problem when no keyboard is attached. My first patch works for him: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=59f4e7d572980a521b7bdba74ab71b21f5995538 But the latest patch does not work for him : http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=8b93789808756bcc1e5c90c99f1b1ef52f839a51 We found that it was necessary to also set the "disable keyboard" flag in the command byte, as the first patch was doing. The second patch tries to minimally modify the command byte, but it is not enough. Please consider this simple one-line patch to help people with low end VIA motherboards reboot when no keyboard is attached. Hiroto Shibuya has verified that this works for him (as I no longer have an afflicted machine). Additional discussion: Note that original patch from Truxton DOES disable keyboard and this has been in main tree since 2.6.14, thus it must have quite a bit of air time already. http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.14.y.git;a=commit;h=59f4e7d572980a521b7bdba74ab71b21f5995538 Note that he only mention "System flag" in the description and comment, but in the code, "disable keyboard" flag is set. outb(0x14, 0x60); /* set "System flag" */ In 2.6.23, he made a change to read the current byte and then mask the flags, but along this change, he only set the "System flag" and dropped the setting of "disable keyboard" flag. http://git.kernel.org/?p=linux/kernel/git/stable/linux-2.6.23.y.git;a=commit;h=8b93789808756bcc1e5c90c99f1b1ef52f839a51 outb(cmd | 0x04, 0x60); /* set "System flag" */ So my request is to restore the setting of disable keyboard flag which has been there since 2.6.14 but disappeared in 2.6.23. Cc: Lee Garrett <lee-in-berlin@web.de> Cc: "Hiroto Shibuya" <hiroto.shibuya@gmail.com> Cc: Natalie Protasevich <protasnb@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Aristeu Rozanski <aris@ruivo.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
Some BIOSes advertise HPET at 0x0. We really do no want to allocate a resource there. Check for it and leave early. Other BIOSes tell us the HPET is at 0xfed0000000000000 instead of 0xfed00000. Add a check and fix it up with a warning on user request. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David P. Reed 提交于
Correct potentially unstable PC RTC time register reading in time_64.c Stop the use of an incorrect technique for reading the standard PC RTC timer, which is documented to "disconnect" time registers from the bus while updates are in progress. The use of UIP flag while interrupts are disabled to protect a 244 microsecond window is one of the Motorola spec sheet's documented ways to read the RTC time registers reliably. tglx: removed locking changes from original patch, as they gain nothing (read_persistent_clock is only called during boot, suspend, resume - so no hot path affected) and conflict with the paravirt locking scheme (see 32bit code), which we do not want to complicate for no benefit. Signed-off-by: NDavid P. Reed <dpreed@reed.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David P. Reed 提交于
Fix hard freeze on x86_64 when the ntpd service calls update_persistent_clock() A repeatable but randomly timed freeze has been happening in Fedora 6 and 7 for the last year, whenever I run the ntpd service on my AMD64x2 HP Pavilion dv9000z laptop. This freeze is due to the use of spin_lock(&rtc_lock) under the assumption (per a bad comment) that set_rtc_mmss is called only with interrupts disabled. The call from ntp.c to update_persistent_clock is made with interrupts enabled. Signed-off-by: NDavid P. Reed <dpreed@reed.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 David P. Reed 提交于
Fix a typo in ntp.c that has caused updating of the persistent (RTC) clock when synced to NTP to behave erratically. When debugging a freeze that arises on my AMD64 machines when I run the ntpd service, I added a number of printk's to monitor the sync_cmos_clock procedure. I discovered that it was not syncing to cmos RTC every 11 minutes as documented, but instead would keep trying every second for hours at a time. The reason turned out to be a typo in sync_cmos_clock, where it attempts to ensure that update_persistent_clock is called very close to 500 msec. after a 1 second boundary (required by the PC RTC's spec). That typo referred to "xtime" in one spot, rather than "now", which is derived from "xtime" but not equal to it. This makes the test erratic, creating a "coin-flip" that decides when update_persistent_clock is called - when it is called, which is rarely, it may be at any time during the one second period, rather than close to 500 msec, so the value written is needlessly incorrect, too. Signed-off-by: David P. Reed Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
The x86 merge modified the tags target to handle the two separate source directories. Remove it now that i386/x86_64 are gone completely. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
92cb7612 sets cpu_info->cpu_index to zero for no reason. Referencing cpu_info->cpu_index now points always to CPU#0, which is apparently not what we want. Remove it. Spotted-by: NZou Nan hai <nanhai.zou@intel.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andreas Herrmann 提交于
Fix regressions introduced with 92cb7612. It can happen that cpuinfo is displayed for CPUs that are not online or even worse for CPUs not present at all. As an example, following was shown for a "second" CPU of a single core K8 variant: processor : 0 vendor_id : unknown cpu family : 0 model : 0 model name : unknown stepping : 0 cache size : 0 KB fpu : yes fpu_exception : yes cpuid level : 0 wp : yes flags : bogomips : 0.00 clflush size : 0 cache_alignment : 0 address sizes : 0 bits physical, 0 bits virtual power management: Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Andreas Herrmann 提交于
Commit d435d862 ("cpu hotplug: mce: fix cpu hotplug error handling") changed the error handling in mce_cpu_callback. In cases where not all CPUs are brought up during boot (e.g. using maxcpus and additional_cpus parameters) mce_cpu_callback now returns NOTFIY_BAD because for such CPUs cpu_data is not completely filled when the notifier is called. Thus mce_create_device fails right at its beginning: if (!mce_available(&cpu_data[cpu])) return -EIO; As a quick fix I suggest to check boot_cpu_data for MCE. To reproduce this regression: (1) boot with maxcpus=2 addtional_cpus=2 on a 4 CPU x86-64 system (2) # echo 1 >/sys/devices/system/cpu/cpu2/online -bash: echo: write error: Invalid argument dmesg shows: _cpu_up: attempt to bring up CPU 2 failed Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
dont use the vgetcpu tcache - it's causing problems with tasks migrating, they'll see the old cache up to a jiffy after the migration, further increasing the costs of the migration. In the worst case they see a complete bogus information from the tcache, when a sys_getcpu() call "invalidated" the cache info by incrementing the jiffies _and_ the cpuid info in the cache and the following vdso_getcpu() call happens after vdso_jiffies have been incremented. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NUlrich Drepper <drepper@redhat.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Randy Dunlap 提交于
Fix header file name for Voyager build. In file included from arch/x86/kernel/setup_32.c:61: include/asm-x86/mach-voyager/setup_arch.h:2:26: error: asm/setup_32.h: No such file or directory make[1]: *** [arch/x86/kernel/setup_32.o] Error 1 Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Randy Dunlap 提交于
Fix Voyager section mismatch due to using __devinit instead of __cpuinit. WARNING: vmlinux.o(.text+0xd943): Section mismatch: reference to .init.text:init_gdt (between 'voyager_smp_prepare_boot_cpu' and 'smp_vic_cmn_interrupt') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Randy Dunlap 提交于
Fix Voyager section mismatches: voyager_cat_init() should be __init. WARNING: vmlinux.o(.text+0xee83): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeea6): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeeac): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xeeb2): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xef4c): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xef56): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf10f): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf13b): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf14b): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf159): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1b1): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1bb): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1c1): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1c7): Section mismatch: reference to .init.data:eprom_buf (between 'voyager_cat_init' and 'aes_enc_blk') WARNING: vmlinux.o(.text+0xf1e6): Section mismatch: reference to .init.data: (between 'voyager_cat_init' and 'aes_enc_blk') Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
es7000_check_dst() contains a memcpy from 0, which probably should have been a memset. Remove it and check the retunr value from acpi_get_table_header. Noticed by: Joe Perches <joe@perches.com> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Linus Torvalds 提交于
-
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: return EOPNOTSUPP not ENOTSUPP
-
由 Linus Torvalds 提交于
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4638/1: pxa: use PXA3xx specific macros to define clks [ARM] remove useless setting of VM_RESERVED
-
由 Linus Torvalds 提交于
* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix up whitespace in conservative governor. [CPUFREQ] Make cpufreq_conservative handle out-of-sync events properly [CPUFREQ] architectural pstate driver for powernow-k8
-
由 Eric Paris 提交于
ENOTSUPP is not a valid error code in the kernel (it is defined in some NFS internal error codes and has been improperly used other places). In the !CONFIG_SECURITY_SELINUX case though it is possible that we could return this from selinux_audit_rule_init(). This patch just returns the userspace valid EOPNOTSUPP. Signed-off-by: NEric Paris <eparis@redhat.com> Signed-off-by: NJames Morris <jmorris@namei.org>
-
由 eric miao 提交于
PXA3xx uses its own clk_pxa3xx_cken_ops, modify the code to use the PXA3xx specific macros to define its clocks Signed-off-by: Neric miao <eric.miao@marvell.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
- 16 11月, 2007 3 次提交
-
-
由 Linus Torvalds 提交于
This code harks back to the days when we didn't count dirty mapped pages, which led us to try to balance the number of dirty unmapped pages by how much unmapped memory there was in the system. That makes no sense any more, since now the dirty counts include the mapped pages. Not to mention that the math doesn't work with HIGHMEM machines anyway, and causes the unmapped_ratio to potentially turn negative (which we do catch thanks to clamping it at a minimum value, but I mention that as an indication of how broken the code is). The code also was written at a time when the default dirty ratio was much larger, and the unmapped_ratio logic effectively capped that large dirty ratio a bit. Again, we've since lowered the dirty ratio rather aggressively, further lessening the point of that code. Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NETFILTER]: Fix NULL pointer dereference in nf_nat_move_storage() [SUNHME]: VLAN support for sunhme [CHELSIO]: Fix skb->dev setting. [NETFILTER]: fix compat_nf_sockopt typo [INET]: Fix potential kfree on vmalloc-ed area of request_sock_queue [VIA_VELOCITY]: Don't oops on MTU change. iwl4965: fix not correctly dealing with hotunplug rt2x00: Fix chipset revision validation iwl3945: place CCK rates in front of OFDM for supported rates mac80211: Fix queuing of scan containing a SSID
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: [MIPS] N32 needs to use the compat version of sys_nfsservctl. [MIPS] irq_cpu: use handle_percpu_irq handler to avoid dropping interrupts. [MIPS] Sibyte: Fix name of clocksource. [MIPS] SNI: s/achknowledge/acknowledge/ [MIPS] Makefile: Fix canonical system names [MIPS] vpe: handle halting TCs in an errata safe way. [MIPS] Sibyte: Stop timers before programming next even. [MIPS] Sibyte: Increase minimum oneshot timer interval to two ticks. [MIPS] Lasat: Fix overlap of interrupt number ranges. [MIPS] SNI PCIT CPLUS: workaround for b0rked irq wiring of onboard PCI bus 1 [MIPS] Fix shadow register support. [MIPS] Change get_cycles to always return 0. [MIPS] Fix typo in R3000 TRACE_IRQFLAGS code [MIPS] Sibyte: Replace use of removed IO_SPACE_BASE with IOADDR. [MIPS] iounmap if in vr41xx_pciu_init() pci clock is over 33MHz [MIPS] BCM1480: Remove duplicate acknowledge of timer interrupt. [MIPS] Sibyte: pin timer interrupt to their cores. [MIPS] Qemu: Add early printk, your friend in a cold night. [MIPS] Convert reference to mem_map to pfn_to_page(). [MIPS] Sibyte: resurrect old cache hack.
-