This needs same quirk as applied to other YOGA sensor hubs.  Refer to commit
21589ebd ("HID: sensor-hub: Add in quirk for Lenovo Yogas with ITE")
Signed-off-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

There seems to be a new version of the Microchip Pick16F1454 with a
different PID (0xf2f7). This device should also be ignored by the HID
driver. The PID was observed with the second version of the Yepkit Ykush
USB hub.
Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

All ELAN hid devices seem to require the ALWAYS_POLL quirk. Let's use
this quirk for all devices from this vendor, rather than maintaining a
list of all its known product IDs.
Tested-by: NAdrien Vergé <adrienverge@gmail.com>
Signed-off-by: NAdrien Vergé <adrienverge@gmail.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Reviewed-by: NJiri Kosina <jkosina@suse.cz>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch adds basic support for the Logitech G920 wheel when in HID
mode. This wheel 'speaks' the HID++ protocol, and therefor is driven
with hid-logitech-hidpp.

At this stage the driver only shows that it can communicate with the
wheel by outputting the name discovered over HID++.

The normal HID functions work to give input functionality using
joystick/event interface.

Note: in 'hidpp_probe()' we have to start the hardware to get packets
flowing, the same might apply in future for other devices which don't
use the unifying protocol.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Without quirk keyboard repeats '6' until volume control is used since it
indicates the key is pressed without ever releasing.
Signed-off-by: NJimmy Berry <jimmy@boombatower.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch is a follow-up to 47eeca8a48 (" HID: sensor-hub: Add in quirk
for Lenovo Yogas with ITE")

The Lenovo Yoga 2 13 seems to be sold in multiple variants with minor
difference3s. IN my case, the USB ID for ITE chip is different than the
Yoga 2 11 and Yoga 3 14.

Without the quirk, no data is received from the accelerometer. I have
verified the patch, testing this on 4.3-rc4 (and 4.2 stable). With this
patch, proper orientation data is received.

rrs@learner:~/Community/UpstreamSources/linux-upstream_GIT (stable-42)$
monitor-sensor
** Message: Accelerometer orientation changed: bottom-up
** Message: Light changed: 0.000000 (lux)
±** Message: Accelerometer orientation changed: left-up
** Message: Accelerometer orientation changed: bottom-up
** Message: Accelerometer orientation changed: left-up
** Message: Accelerometer orientation changed: normal
** Message: Light changed: 29.999999 (lux)

monitor-sensor can be found in the iio-sensor-proxy tool.
Signed-off-by: NRitesh Raj Sarraf <rrs@debian.org>
Acked-by: NSrinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The WiiU adapter from Mayflash (see
http://www.mayflash.com/Products/NINTENDOWiiU/W009.html) is not
working correctly.

The "XInput" mode works fine, the controller is recognized as a xbox
controller. But it is only possible to connect one controller with this method.

In "DInput" mode the device is recognized as some kind of mouse input but no
joystick is created. This commit will change this behavior with
HID_QUIRK_MULTI_INPUT to split the device into 4 input devices so that it will
also create joysticks in /dev/input/js*.
Signed-off-by: NOliver Schmitt <voltumna@gmx.net>
Reviewed-by: NFelipe Balbi <balbi@ti.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch implements a HID driver for the Corsair Vengeance K90 keyboard.

It fixes the behaviour of the keys using incorrect HID usage codes and exposes
the macro playback mode and current profile to the user space through sysfs
attributes. It also adds two LED class devices controlling the "record" LED and
the backlight.
Signed-off-by: NClément Vuchener <clement.vuchener@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds support for Microsoft Type Cover 3 with 0x07e2 product ID.
Signed-off-by: NDonavan Lance <shvr@fedoraproject.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This patch enables the Saitek HID quirk for the mode button of the Mad Catz
R.A.T.5 gaming mouse by adding the same quirk that's been neeeded for
preivous versions.

[jikos@kernel.org: update changelog a little bit]
Signed-off-by: NHarald Brinkmann <hbrinkmann@braincalibration.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Looks like 0x8882 needs the same quirk than 0x8883.
Given that both devices claim they are "TPV OpticalTouchScreen" rename
the 0x8883 to add its PID in the #define.
Reported-by: NBlaine Lee <blaine.j.lee@medtronic.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This gamepad advertise 5 absolute axis while 4 are actually used.
The second Z axis shows some garbage, so it has to be ignored by HID.
The first Z axis and the Rz one are actually Rx and Ry. Remap them.

We could also just remap and ignore the axis in .input_mapping(). I
went ahead with .report_fixup() first, so here it is.
Reported-by: NOrivej Desh <orivej@gmx.fr>
Tested-by: NOrivej Desh <orivej@gmx.fr>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Acer Aspire Switch 12 keyboard Chicony's controller reports too big usage
index on the 1st interface. The patch fixes the report. The work based on
solution from drivers/hid/hid-holtek-mouse.c

Bug report: https://bugzilla.kernel.org/show_bug.cgi?id=101721Signed-off-by: NNicholas Kudriavtsev <nkudriavtsev@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

Since this wheel is now available, and the USBID is listed on their website,
this patch adds it to allow the hid-lg4ff force feedback driver to find it.

I do not have this wheel to test with, but this should at least get it working
in emulation mode.

Note: There is probably more work required for adjust HID descriptor and handle
switching between emulation and native modes.
Signed-off-by: NSimon Wood <simon@mungewell.org>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

This patch adds keyboard support for MacbookPro12,1 as WELLSPRING9
(0x0272, 0x0273, 0x0274). The touchpad is handled in a separate
bcm5974 patch, as usual.
Tested-by: NJohn Horan <knasher@gmail.com>
Tested-by: NJochen Radmacher <jradmacher@gmx.de>
Tested-by: NYang Hongyang <burnef@gmail.com>
Tested-by: NYen-Chin, Lee <coldnew.tw@gmail.com>
Tested-by: NGeorge Hilios <ghilios@gmail.com>
Tested-by: NJanez Urevc <janez@janezurevc.name>
Signed-off-by: NHenrik Rydberg <rydberg@bitmath.org>
Acked-by: NJiri Kosina <jkosina@suse.com>
Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>

Add device IDs for CJTouch 0020 and 0040 panels.
Signed-off-by: NYang Bo <linuxsea@163.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

Adding support for the Microsoft Surface 3 (non-pro) Type Cover.

The existing definitions and quirks are actually for the Surface
Pro 3 type covers. I've renamed the old constants to reflect that
they belong to the Surface Pro 3, and added a new constant and
matching code for the Surface 3.
Signed-off-by: NStephen Just <stephenjust@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.com>

Like yogas with TEXAS_INSTRUMENTS, yogas with ITE chips needs
to be initialized with enumeration quirks.
Signed-off-by: NJiri Kosina <jkosina@suse.com>

Adding support for the Microsoft Surface Pro Power Cover.
Signed-off-by: NRaimund Roth <raimundmroth@gmail.gom>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Removes Vernier Software & Technology devices from the ldusb
driver and the hid_ignore_list table of the usbhid driver in the
Linux tree.  These devices will now be supported via the hidraw
driver.

A user space driver for these devices will be found in the
Go! Software Development Kit from Vernier at
http://www.vernier.com/downloads/software-development-kits/go-sdk/.
These devices are also be supported by the LabQuest2 standalone
interface shown at http://www.vernier.com/products/interfaces/labq2/
and the LoggerPro for Linux software shown at
http://www.vernier.com/downloads/logger-pro-linux/.
Signed-off-by: NDennis O'Brien <dennis.obrien@eqware.net>
Acked-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

I received a report from an user of following mouse which needs this quirk:

usb 1-1.6: USB disconnect, device number 58
usb 1-1.6: new low speed USB device number 59 using ehci_hcd
usb 1-1.6: New USB device found, idVendor=04f2, idProduct=1053
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Optical Mouse
usb 1-1.6: Manufacturer: PixArt
usb 1-1.6: configuration #1 chosen from 1 choice
input: PixArt USB Optical Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input5887
generic-usb 0003:04F2:1053.16FE: input,hidraw2: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-0000:00:1a.0-1.6/input0

The quirk was tested by the reporter and it fixed the frequent disconnections etc.

[jkosina@suse.cz: reorder the position in hid-ids.h]
Signed-off-by: NHerton R. Krzesinski <herton@redhat.com>
Reviewed-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Like other KVM switches, the Aten DVI KVM switch needs a quirk to avoid spewing
errors:

[791759.606542] usb 1-5.4: input irq status -75 received
[791759.614537] usb 1-5.4: input irq status -75 received
[791759.622542] usb 1-5.4: input irq status -75 received

Add it.
Signed-off-by: NLaura Abbott <labbott@fedoraproject.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Once there were kernel drivers for some of the phidgets devices, and for
those kernel drivers to work the hid system needed exceptions. Now the
kernel drivers are long gone in favour of the user-space drivers.

The user-space drivers support many more phidget devices and uses libusb.
The udev rules set up permissions so that the kernel hid driver can be
unbound from libusb, as it does for many devices not in hid_ignore_list.

http://www.phidgets.com/docs/OS_-_LinuxSigned-off-by: NSean Young <sean@mess.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds the PID for the Sony motion controller to the hardware ID list.
Signed-off-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NFrank Praznik <frank.praznik@oh.rr.com>
Acked-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This dock is used with the Thinkpad Helix 2 but suffers from an error
in the report descriptor where an usage max is 65535.

Add a report fixup for it and make the keyboard working.
Tested-by: NJonathan Oppenheim <lejono@gmail.com>
Tested-by: NJohn Reid <owlman.lists@gmail.com>
Signed-off-by: NBenjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The raphnet.net 4nes4snes and 2nes2snes multi-joystick adapters use a single
HID report descriptor with one report ID per controller. This has the effect
that the inputs of otherwise independent game controllers get packed in one
large joystick device.

With this patch each controller gets its own /dev/input/jsX device, which is
more natural and less confusing than having all inputs going to the same place.
Signed-off-by: NRaphael Assenat <raph@raphnet.net>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The device exists with two device IDs instead of one as previously
believed.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

During a stress test these mice kept dropping and reappearing
in runlevel 1 as opposed to 5.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This mouse is also known under other IDs. It needs the quirk or will disconnect
in runlevel 1 or 3.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This mouse needs QUIRK_ALWAYS_POLL.
Signed-off-by: NOliver Neukum <oneukum@suse.de>
CC: stable@vger.kernel.org
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The linux kernel has supported the TiVo Slide remote control for some time, but
does not recognize the USB ID of the newer Slide Pro. This patch adds the
missing data structures so the newer remote will be recognized by the driver,
thereby allowing the TiVo, LiveTV, and Thumbs Up/Down buttons to be
mapped with a hwdb file.
Signed-off-by: NForest Wilkinson <web11.forest@tibit.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

This device disconnects every 60s without X
Signed-off-by: NOliver Neukum <oliver@neukum.org>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Microsoft Natural Wireless Ergonomic Keyboard 7000 has special My
Favorites 1..5 keys which are handled through a vendor-defined usage
page (0xff05).

Apply MS_ERGONOMY quirks handling to USB PID 0x071d (Microsoft Microsoft
2.4GHz Transceiver V1.0) so that the My Favorites 1..5 keys are reported
as KEY_F14..18 events.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=52841Signed-off-by: NJakub Sitnicki <jsitnicki@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Signed-off-by: NDarren Salt <devspam@moreofthesa.me.uk>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Genius PenSketch M912 digitizer tablet sends incorrect report descriptor by
default. This patch replaces it with a corrected one.
Signed-off-by: NMilan Plzik <milan.plzik@gmail.com>
Reviewed-by: NNikolai Kondrashov <spbnick@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

The Microchip Pick16F1454 is exported as a HID device and is used by for
example the Yepkit YKUSH three-port switchable USB hub. However, it is not an
actual HID-device. On the Yepkit, it is used to power up/down the ports on the
hub. The HID driver should ignore this device.
Signed-off-by: NKristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Have hid-rmi handle all of the Razer Blade HID devices that are part of the
composite USB device. This will allow hid-rmi to operate the touchpad in rmi
mode while passing events from the other devices to hid-input.
Signed-off-by: NAndrew Duggan <aduggan@synaptics.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Based on code for the US Surface Type Cover 3
from commit be3b1634
("HID: add support for MS Surface Pro 3 Type Cover"):
Signed-off-by: NAlan Wu <alan.c.wu@gmail.com>
Tested-by: NKarlis Dreizis <karlisdreizis@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

New Genius MousePen i608X devices have a new id 0x501a instead of the
old 0x5011 so add a new #define with "_2" appended and change required
places.

The remaining two checkpatch warnings about line length
being over 80 characters are present in the original files too and this
patch was made in the same style (no line break).

Just adding a new id and changing the required places should make the
new device work without any issues according to the bug report in the
following url.

This patch was made according to and fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=67111Signed-off-by: NGiedrius Statkevičius <giedrius.statkevicius@gmail.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>

Adds force feedback support for BETOP USB game controllers.
These devices are mass produced in China.
Signed-off-by: NHuang Bo <huangbobupt@163.com>
Signed-off-by: NJiri Kosina <jkosina@suse.cz>