As in sil4726, SRST can't be trusted on sil3726 causing detection
problems under certain configuraitons.  I thought it was from the
Config Disk device but apparently not.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fix libata-scsi kernel-doc notation:

Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd'
Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf'
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock).
Signed-off-by: NPradeep Singh <rautelap@gmail.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

ICH8M on macbooks are peculiar in that some of them lock up when the
second port is enabled, some return bogus values on SIDPR access while
yet others hang on SIDPR access.  Also, the ich8m_apple_sata entry was
wrongly added below generic ich8m entry making it virtually useless.

This patch works around macbook ich8m problems by

* moving ich8m_apple_sata entry above generic ich8m entry
* dropping PIIX_FLAG_SIDPR from ich8m_apple_sata
* adding subsystem 106b:00a1 as ich8m_apple_sata

Reported and tested by MATSUBAYASHI.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Cc: MATSUBAYASHI 'Shaolin' Kohji <shaolin@rhythmaning.org>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The 5182 System-On-Chip (SOC) variant wants certain lower
bits to be cleared on any write to the PHY_MODE3 register.

If/when support is added for other SOC variants, we'll need
some way to uniquely identify the 5182, and not perform this
workaround for the others.

But for now, it is the only SOC variant we support here.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The "B2" variant of the 6041/6081 (genII) chips requires
that the PHY_MODE3 register be rewritten after any write
to PHY_MODE4.

This fixes a regression introduced by an earlier patch.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

The only public release of the 6042/7042 chips was/is revision "B0".
Remove code that attempted to deal with earlier, non-released revs.
This matches the logic of the current Marvell "proprietary" driver.

Also, bump up the sata_mv version number, to reflect this batch of erratas.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Fix and update the errata handling for the PHY_MODEx registers.
This improves receiver noise tolerance, among other things.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

Convert the System-on-Chip flag from a host flag to an hpriv flag,
for better consistency with other chip-rev flags, and for easier use
in errata fixes etc.

Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency
of naming/use (everything else SOC-related already uses "SOC").

There are no functionality changes in this patch.
Signed-off-by: NMark Lord <mlord@pobox.com>
Signed-off-by: NJeff Garzik <jgarzik@redhat.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits)
  llc: Fix double accounting of received packets
  netfilter: nf_conntrack_expect: fix error path unwind in nf_conntrack_expect_init()
  bluetooth: fix locking bug in the rfcomm socket cleanup handling
  mac80211: fix alignment issue with compare_ether_addr()
  mac80211: Fix for NULL pointer dereference in sta_info_get()
  mac80211: fix a typo in ieee80211_handle_filtered_frame comment
  rndis_wlan: add missing range check for power_output modparam
  iwlwifi: fix rate scale TLC column selection bug
  iwlwifi: fix exit from stay_in_table state
  rndis_wlan: Make connections to TKIP PSK networks work
  mac80211 : Fixes the status message for iwconfig
  rt2x00: Use atomic interface iteration in irq context
  rt2x00: Reset antenna RSSI after switch
  rt2x00: Don't count retries as failure
  rt2x00: Fix memleak in tx() path
  mac80211: reorder channel and freq reporting in wext scan report
  b43: Fix controller restart crash
  mac80211: fix ieee80211_rx_bss_put/get imbalance
  net/mac80211: always true conditionals
  b43: Upload both beacon templates on initial load
  ...

* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6:
  [S390] Update default configuration.
  [S390] disassembler: fix idte instruction format.
  [S390] tape: fix race with stack local wait_queue_head_t.
  [S390] 3270: fix race with stack local wait_queue_head_t.
  [S390] dasd: use a generic wait_queue for sleep_on
  [S390] sclp_vt220: fix scheduling while atomic bug.
  [S390] showmem: Only walk spanned pages.
  [S390] appldata: prevent cpu hotplug when walking cpu_online_map.
  [S390] Fix section mismatch warnings.
  [S390] s390 types: make dma_addr_t 64 bit capable
  [S390] tape: Fix race condition in tape block device driver
  [S390] fix sparsemem related compile error with allnoconfig on s390

In this case we want a constant pointer to constant chars:

drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be?

Like the error says.

drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be?
drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be?
drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be?
drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be?
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

llc_sap_rcv was being preceded by skb_set_owner_r, then calling
llc_state_process that calls sock_queue_rcv_skb, that in turn calls
skb_set_owner_r again making the space allowed to be used by the socket to be
leaked, making the socket to get stuck.

Fix it by setting skb->sk at llc_sap_rcv and leave the accounting to be done
only at sock_queue_rcv_skb.
Reported-by: NDmitry Petukhov <dmgenp@gmail.com>
Tested-by: NDmitry Petukhov <dmgenp@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The correct instruction format of idte is "idte r1,r3,r2" with
r1 at bit 24, r3 at bit 16 and r2 at bit 28.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

A wait_event call with a stack local wait_queue_head_t structure that is
used to do the wake up for the wait_event is inherently racy. After the
wait_event finished the wake_up call might not have completed yet.
Replace the stack local wait_queue_head_t in tape_do_io and
tape_do_io_interruptible with a per device wait queue.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

A wait_event call with a stack local wait_queue_head_t structure that is
used to do the wake up for the wait_event is inherently racy. After the
wait_event finished the wake_up call might not have completed yet.
Remove the stack local wait_queue_head_t from raw3270_start_init and
use the global raw3270_wait_queue instead.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_
functions from being referenced by callback_data while it does not
exist any more.
Signed-off-by: NStefan Haberland  <stefan.haberland@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The driver incorrectly assumed that putchar will only be called from
schedulable process context and therefore blocked and waited if no
free output buffers where available.
Since putchar may also be called from BH context this may lead to
deadlocks.
To fix this just return the number of characters accepted and let the
upper layer handle the rest.

The console write function will busy wait (sclp_sync_wait) until a
buffer is available again.

Cc: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Convert show_mem() so its nearly the same as on x86/powerpc.
Gives us proper locking and we get also rid of the only use of max_mapnr.
Also the number of pages was contained in an int which might not be
sufficient not too far in the future.

Cc: Johannes Weiner <hannes@saeurebad.de>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use get_online_cpus() to prevent cpu hotplug in situations where
for_each_online_cpu() is called.
Signed-off-by: NGerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This fixes the last remaining section mismatch warnings in s390
architecture code. It reveals also a real bug introduced by... me
with git commit 2069e978
("[S390] sparsemem vmemmap: initialize memmap.")

Calling the generic vmemmap_alloc_block() function to get initialized
memory is a nice idea, however that function is __meminit annotated
and therefore the function might be gone if we try to call it later.
This can happen if a DCSS segment gets added.

So basically revert the patch and clear the memmap explicitly to fix
the original bug.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

virtio tests with guests larger than 4 GB revealed that the dma_addr_t
definition for s390 did not make it into the 64bit world.
This patch changes the definition on s390 to have an u64 on 64bit and
u32 on 32bit systems.
Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Due to incorrect function call sequence it can happen that a tape block
request is finished before the request is taken from the block request queue.

The following sequence leads to that condition:
 * tapeblock_start_request() -> start CCW program
 * Request finishes -> IO interrupt
 * tapeblock_end_request()
 * end_that_request_last()

If blkdev_dequeue_request() has not been called before end_that_request_last(),
a kernel bug is triggered in end_that_request_last() because the request is
still queued. To solve that problem blkdev_dequeue_request() has to be called
before starting the CCW program.
Signed-off-by: NMichael Holzheu <holzheu@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

On s390 make allnoconfig fails with the following build error:

arch/s390/mm/init.c: In function 'show_mem':
arch/s390/mm/init.c:55: error: implicit declaration of function 'pfn_valid'
make[1]: *** [arch/s390/mm/init.o] Error 1
make: *** [arch/s390/mm] Error 2

This problem can by fixed ensuring that ARCH_SELECT_MEMORY_MODEL
is always turned on.
Signed-off-by: NHans-Joachim Picht <hans@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-2.6:
  driver-core: prepare for 2.6.27 api change by adding dev_set_name

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: EHCI: fix performance regression"
  USB: fsl_usb2_udc: fix recursive lock
  USB: usb-serial: option: Don't match Huawei driver CD images
  USB: pl2303: another product ID
  USB: add another scanner quirk
  USB: Add support for ROKR W5 in unusual_devs.h
  USB: Fix M600i unusual_devs entry
  USB: usb-storage: unusual_devs update for Cypress ATACB
  USB: EHCI: fix performance regression
  USB: EHCI: fix bug in Iso scheduling
  USB: EHCI: fix remote-wakeup regression
  USB: EHCI: suppress unwanted error messages
  USB: EHCI: fix up root-hub TT mess
  USB: add all configs to the "descriptors" attribute
  USB: fix possible deadlock involving sysfs attributes
  USB: Firmware loader driver for USB Apple iSight camera
  USB: FTDI_SIO : Add support for Matrix Orbital PID Range

Create the dev_set_name function now so that various subsystems can
start changing over to it before other changes in 2.6.27 will make it
compulsory.

Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This reverts commit fa38dfcc.

It wasn't really a regression and David and Alan are still working
through the issues reported.
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

UDC needs to release lock before calling out to gadget driver, since
it may need to reenter.  The change fixes kernel BUG observed on rt
kernel.

> kernel BUG at kernel/rtmutex.c:683!
> stopped custom tracer.
> Oops: Exception in kernel mode, sig: 5 [#1]
> PREEMPT MPC834x ITX
> NIP: c021629c LR: c0216270 CTR: 00000000
> REGS: df761d70 TRAP: 0700   Not tainted  (2.6.23.9-rt13)
> MSR: 00021032 <ME,IR,DR>  CR: 28000022  XER: 00000000
> TASK = df632080[241] 'IRQ-38' THREAD: df760000
> GPR00: 00000001 df761e20 df632080 00000000 11111111 00000000 df761e6c
> 00000000
> GPR08: df761e48 00000000 df761e50 00000000 80000000 ede5cdde 1fffd000
> 00800000
> GPR16: ffffffff 00000000 007fff00 00000040 00000000 007ffeb0 00000000
> 1fff8b08
> GPR24: 00000000 00000026 00000000 df79a320 c026b2e8 c02240bc 00009032
> df79a320
> NIP [c021629c] rt_spin_lock_slowlock+0x9c/0x200
> LR [c0216270] rt_spin_lock_slowlock+0x70/0x200
> Call Trace:
> [df761e20] [c0216270] rt_spin_lock_slowlock+0x70/0x200 (unreliable)
> [df761e90] [c0182828] fsl_ep_disable+0xcc/0x154
> [df761eb0] [c0184d30] eth_reset_config+0x88/0x1d0
> [df761ed0] [c0184ec0] eth_disconnect+0x48/0x64
> [df761ef0] [c01831a4] reset_queues+0x60/0x78
> [df761f00] [c0183b74] fsl_udc_irq+0x9b8/0xa58
> [df761f50] [c003ef30] handle_IRQ_event+0x64/0x100
> [df761f80] [c003f758] thread_simple_irq+0x6c/0xc8
> [df761fa0] [c003f888] do_irqd+0xd4/0x2e4
> [df761fd0] [c0032284] kthread+0x50/0x8c
> [df761ff0] [c000f9b4] kernel_thread+0x44/0x60
Signed-off-by: NLi Yang <leoli@freescale.com>
Cc: Eugene T. Bordenkircher <Eugene_Bordenkircher@selinc.com>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Add the interface info matching to all Huawei cards, as they all also
contain a Mass Storage Device interface (usually containing Windows
drivers) which should not get bound by this driver.

See also drivers/usb/storage/unusual_devs.h
Signed-off-by: NMichael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

I've just got a USB GPRS/EDGE modem branded Manufacturer Micromax Model
MMX610U (see http://www.airtel.in/level2_t3data.aspx?path=1/106/179)
working by adding another product ID to pl2303.  Modem info reports same
module as  Max Arnold's i.e.SIMCOM SIM600  but  with product ID 0x0612
(cf Ox0611).

From: Steve Murphy <steve@gnusis.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Like the HP53{00,70} scanner other devices of the OEM Avision require
the USB_QUIRK_STRING_FETCH_255 to correct set a configuration with
"recent" Linux kernels.
Signed-off-by: NRené Rebe <rene@exactcode.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch adds support for rev 2 of an existing unusual_devs entry
enabling ROKR W5s to work. Greg, please apply.

From: Javier Smaldone <javier@smaldone.com.ar>
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

It turns out that the unusual_devs entry for the Motorola M600i needs
another flag. This patch adds it. Thanks to Atte André Jensen
<atte@ballbreaker.dk>.
Signed-off-by: NPhil Dibowitz <phil@ipom.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1101) updates the unusual_devs entry for the Cypress
ATACB pass-through.  The protocol field is changed from US_PR_BULK to
US_PR_DEVICE, since the Cypress devices already set bInterfaceProtocol
to Bulk-only.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1099) fixes a performance regression in ehci-hcd.  The
fundamental problem is that queue headers get removed from the
schedule too quickly, since the code checks for a counter advancing
rather than making an actual time-based check.  The latency involved
in removing the queue header and then relinking it can severely
degrade certain kinds of workloads.

The patch replaces a simple counter with a timestamp derived from the
controller's uframe value.  In addition, the delay for unlinking an
idle queue header is increased from 5 ms to 10 ms; since some
controllers (nVidia) have a latency of up to 1 ms for unlinking, this
reduces the relative impact from 20% to 10%.

Finally, a logical error left over from the IAA watchdog-timer
conversion is corrected.  Now the driver will always either unlink an
idle queue header or set up a timer to unlink it later.  The old code
would sometimes fail to do either.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Cc: David Brownell <david-b@pacbell.net>
Cc: Leonid <leonidv11@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1098) changes the way ehci-hcd schedules its periodic
Iso transfers.  That the current scheduling code is wrong is clear on
the face of it: Sometimes it returns -EL2NSYNC (meaning that an URB
couldn't be scheduled because it was submitted too late), but it does
this even when the URB_ISO_ASAP flag is set (meaning the URB should be
scheduled as soon as possible).

The new code properly implements as-soon-as-possible scheduling,
assigning the next unexpired slot as the URB's starting point.  It
also is more careful about checking for Iso URB completion: It doesn't
bother to check for activity during frames that are already over,
and it allows for the possibility that some of the URB's packets may
have raced the hardware when they were submitted and so never got used
(the packet status is set to -EXDEV).

This fixes problems several people have experienced with USB video
applications.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1097) fixes a bug in the remote-wakeup handling in
ehci-hcd.  The driver currently does not keep track of whether the
change-suspend feature is enabled for each port; the feature is
automatically reset the first time it is read.  But recent changes to
the hub driver require that the feature be read at least twice in
order to work properly.

A bit-vector is added for storing the change-suspend feature values.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Acked-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as1096) fixes an annoying problem: When a full-speed or
low-speed device is plugged into an EHCI controller, it fails to
enumerate at high speed and then is handed over to the companion
controller.  But usbcore logs a misleading and unwanted error message
when the high-speed enumeration fails.

The patch adds a new HCD method, port_handed_over, which asks whether
a port has been handed over to a companion controller.  If it has, the
error message is suppressed.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
CC: David Brownell <david-b@pacbell.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>