Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Userspace should set the first 4 bits of drm_radeon_cs_reloc::flags to
a number from 0 to 15. The higher the number, the higher the priority,
which means a buffer with a higher number will be validated sooner.

The old behavior is preserved: Buffers used for write are prioritized over
read-only buffers if the userspace doesn't set the number.

v2: add buffers to buckets directly, then concatenate them
v3: use a stable sort
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

The statistics are:
- VRAM usage in bytes
- GTT usage in bytes
- number of bytes moved by TTM

The last one is actually a counter, so you need to sample it before and after
command submission and take the difference.

This is useful for finding performance bottlenecks. Userspace queries are
also added.

v2: use atomic64_t
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

When passing buffers between processes, the receiving process needs to know
the original buffer domain, so that it doesn't accidentally move the buffer.

v2: reserve the buffer
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Now that Christian fixed the performance problems with
the feedback buffer in mesa, we can enable variable UVD
clocks.  There are multiple UVD power states associated
with different types and numbers of streams.  This uses
the appropriate state based on that information rather
than always using the fastest UVD clocks which saves some
power.  One possible downside is that this may adversely
affect decode benchmarks since these power states target
specific playback requirements rather than maximum
performance.  If that becomes an issue, we can add a
sysfs attribute to force the max UVD state.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

We no longer need to take the ring lock while checking for
a gpu lockup, so just cleanup the code.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Use atomics and jiffies_64, so that we don't need to have the
ring mutex locked any more and avoid wrap arounds.

v2: fix some checkpatch warnings
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Implements an I2C-over-AUX I2C adapter on top of the generic drm_dp_aux
infrastructure. It extracts the retry logic from existing drivers, which
should help in porting those drivers to this new helper.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
---
Changes in v5:
- move comments partially to to header file
- keep MOT set between I2C messages
- return -EPROTO on short reads

Changes in v4:
- fix typo "bitrate" -> "bit rate"

Changes in v3:
- add back DRM_DEBUG_KMS and DRM_ERROR messages
- embed i2c_adapter within struct drm_dp_aux
- fix typo in comment

Add a helper to probe a DP link (read out the supported DPCD revision,
maximum rate, link count and capabilities) as well as power up the DP
link and configure it accordingly.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
---
Changes in v5:
- export helpers

Changes in v4:
- fix a couple of typos in comments as pointed out by Alex Deucher

Changes in v3:
- split into drm_dp_link_power_up() and drm_dp_link_configure()
- do not change sink state for DPCD versions earlier than 1.1
- sleep for 1-2 ms after setting local sink to D0 state
- read and write consecutive registers where possible
- read DPCD revision when link is probed
- remove duplicate kerneldoc

The function reads the link status (6 bytes starting at offset 0x202)
from the DPCD so that it can be conveniently passed to other DPCD
helpers.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>

This is a superset of the current i2c_dp_aux bus functionality and can
be used to transfer native AUX in addition to I2C-over-AUX messages.

Helpers are provided to read and write the DPCD, either blockwise or
byte-wise. Many of the existing helpers for DisplayPort take a copy of a
portion of the DPCD and operate on that, without a way to write data
back to the DPCD (e.g. for configuration of the link).

Subsequent patches will build upon this infrastructure to provide common
functionality in a generic way.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NJani Nikula <jani.nikula@intel.com>
Signed-off-by: NThierry Reding <treding@nvidia.com>
---
Changes in v5:
- move comments partially to struct drm_dp_aux_msg in header file
- return -EPROTO on short reads in DPCD helpers

Changes in v4:
- fix a typo in a comment

Changes in v3:
- reorder drm_dp_dpcd_writeb() arguments to be more intuitive
- return number of bytes transferred in drm_dp_dpcd_write()
- factor out drm_dp_dpcd_access()
- describe error codes

This reverts commit d8a5dc30.

This breaks plymouth installs, either because plymouth is using the file
"incorrectly" or because the patch is incorrect.  Either way, this needs
to be reverted until it is all figured out.
Reported-by: NJosh Boyer <jwboyer@fedoraproject.org>
Reported-by: NRay Strode <halfline@gmail.com>
Cc: Lennart Poettering <lennart@poettering.net>
Cc: Kay Sievers <kay@vrfy.org>
Cc: Jiri Slaby <jslaby@suse.cz>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Werner Fink <werner@suse.de>
Cc: Hannes Reinecke <hare@suse.de>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This fixes bug introduced in 667a6b7a (regulator: max14577: Add missing
of_node_put). The DTS parsing function returned number of matched
regulators as success status which then was compared against 0 in probe.

Result was a probe fail after successful parsing the DTS:
max14577-regulator: probe of max14577-regulator failed with error 2
Signed-off-by: NKrzysztof Kozlowski <k.kozlowski@samsung.com>
Reviwed-by: NSachin Kamat <sachin.kamat@linaro.org>
Signed-off-by: NMark Brown <broonie@linaro.org>

Enabling SPARSE_IRQ shows up a bug in the irq-orion bridge interrupt
handler. The bridge interrupt is implemented using a single generic
chip. Thus the parameter passed to irq_get_domain_generic_chip()
should always be zero.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Acked-by: NSebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Fixes: 9dbd90f1 ("irqchip: Add support for Marvell Orion SoCs")
Cc: <stable@vger.kernel.org> # v3.11+
Signed-off-by: NJason Cooper <jason@lakedaemon.net>

ENDPTFLUSH and ENDPTPRIME registers are set by software and clear
by hardware. There is a bit for each endpoint. When we are setting
a bit for an endpoint we should make sure we do not touch other
endpoint bit. There is a race condition if the hardware clear the
bit between the read and the write in hw_write.

Cc: stable <stable@vger.kernel.org> # 3.11+
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NMatthieu CASTET <matthieu.castet@parrot.com>
Tested-by: NMichael Grzeschik <mgrzeschik@pengutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The change (008fa749) that moved the
node release code to a separate function broke death notifications in
some cases. When it encountered a reference without a death
notification request, it would skip looking at the remaining
references, and therefore fail to send death notifications for them.

Cc: Colin Cross <ccross@android.com>
Cc: Android Kernel Team <kernel-team@android.com>
Cc: stable <stable@vger.kernel.org> # 3.10
Signed-off-by: NArve Hjønnevåg <arve@android.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Signed-off-by: NJeremy Compostella <jeremy.compostella@intel.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Most WDT driver modules return ENODEV during modprobe if
no valid device was found, but w83697hf_wdt returns EIO.

Let w83697hf_wdt return ENODEV.
Signed-off-by: NStanislav Kholmanskikh <stanislav.kholmanskikh@oracle.com>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NWim Van Sebroeck <wim@iguana.be>

A documentation update exposed the existance of the turbo ratio
register. Update baytrail support to use the turbo range.
Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

LFM (max efficiency ratio) is the max frequency at minimum voltage
supported by the processor.  Using LFM as the minimum P state
increases performmance without affecting power. By not using P states
below LFM we avoid using P states that are less power efficient.
Signed-off-by: NDirk Brandewie <dirk.j.brandewie@intel.com>
Cc: 3.13+ <stable@vger.kernel.org> # 3.13+
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Change "dummy supplies not allowed" error message to warning instead, as this
is a just warning message with no change to the behavior.

[Added a CC to stable since some other bug fixes cause this to come up
more frequently on PCs which is how it was noticed -- broonie]
Signed-off-by: NShuah Khan <shuah.kh@samsung.com>
Signed-off-by: NMark Brown <broonie@linaro.org>
Cc: stable@vger.kernel.org

Fix regression caused by commit b072e53b, which breaks loading nouveau
driver on optimus laptops.

On some platforms, ACPI _DSM method (nouveau_op_dsm_muid, function 0)
has special requirements on the fourth parameter, which is different
from ACPI specifications. So revert to the private implementation
to check availability of _DSM functions instead of using common
acpi_check_dsm() interface.

Fixes: b072e53b (ACPI / nouveau: replace open-coded _DSM code with helper functions)
Reported-and-tested-by: NMaarten Lankhorst <maarten.lankhorst@canonical.com>
[rjw: Subject]
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

sparc_cpu_model isn't in asm/system.h any more, so remove a comment
about it.
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: sparclinux@vger.kernel.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

schedule_delayed_work() takes the delay in jiffies, not msecs.

This bug slipped in with the recent reset logic cleanup
(8ed1fb79: "usb: musb: finish suspend/reset work independently from
musb_hub_control()").
Signed-off-by: NDaniel Mack <daniel@zonque.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Both the PM_RUNTIME and PM_SLEEP callbacks call into the common
msm_otg_{suspend,resume} routines, however these routines are only being
built when CONFIG_PM_SLEEP.  In addition, msm_otg_{suspend,resume} also
depends on msm_hsusb_config_vddcx(), which is only built when
CONFIG_PM_SLEEP.

Fix the CONFIG_PM_RUNTIME, !CONFIG_PM_SLEEP case by changing the
preprocessor conditional, and moving msm_hsusb_config_vddcx().

While we're here, eliminate the CONFIG_PM conditional for setting
up the dev_pm_ops.

This address the following errors Russell King has hit doing randconfig
builds:

drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_suspend':
drivers/usb/phy/phy-msm-usb.c:1691:2: error: implicit declaration of function 'msm_otg_suspend'
drivers/usb/phy/phy-msm-usb.c: In function 'msm_otg_runtime_resume':
drivers/usb/phy/phy-msm-usb.c:1699:2: error: implicit declaration of function 'msm_otg_resume'

Cc: Ivan T. Ivanov <iivanov@mm-sol.com>
Reported-by: NRussell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: NJosh Cartwright <joshc@codeaurora.org>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

Fix possible NULL pointer dereference introduced in
commit 219580e6 (usb: f_fs: check quirk to pad epout
buf size when not aligned to maxpacketsize)

In cases we do wait with:

wait_event_interruptible(epfile->wait, (ep = epfile->ep));

for endpoint to be enabled, functionfs_bind() has not been called yet
and epfile->ffs->gadget is still NULL and the automatic variable 'gadget'
has been initialized with NULL at the point of its definition.
Later on it is used as a parameter to:

usb_ep_align_maybe(gadget, ep->ep, len)

which in turn dereferences it.

This patch fixes it by moving the actual assignment to the local 'gadget'
variable after the potential waiting has completed.
Signed-off-by: NAndrzej Pietrasiewicz <andrzej.p@samsung.com>
Acked-by: NMichal Nazarewicz <mina86@mina86.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

We need to use gadget_is_otg to check if the gadget is really
otg support at runtime, other composite gadget drivers have already
followed this method.
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NFelipe Balbi <balbi@ti.com>

As the lock might be used through DMA-API which is allowed
in interrupt context.
Signed-off-by: NJoerg Roedel <joro@8bytes.org>
Acked-by: NWill Deacon <will.deacon@arm.com>

Adds a selftest function for the of_match_node function. of_match_node
is supposed to handle precedence for the compatible property as well as
the name and device_type values. This patch adds some test case data and
a function that makes sure each test node matches against the correct
entry of an of_device_id table.

This code was written to verify the new of_match_node() implementation
that is an earlier part of this series.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Cc: Kevin Hao <haokexin@gmail.com>

The testcase data is usable by any platform. This patch moves it into
the drivers/of directory so it can be included by any architecture.

Using the test cases requires manually adding #include <testcases.dtsi>
to the end of the boards .dtsi file and enabling CONFIG_OF_SELFTEST. Not
pretty though. A useful project would be to make the testcase code
easier to execute.
Signed-off-by: NGrant Likely <grant.likely@linaro.org>

In the current implementation of __of_match_node(), it will compare
each given match entry against all the node's compatible strings
with of_device_is_compatible().

To achieve multiple compatible strings per node with ordering from
specific to generic, this requires given matches to be ordered from
specific to generic. For most of the drivers this is not true and
also an alphabetical ordering is more sane there.

Therefore, we define a following priority order for the match, and
then scan all the entries to find the best match.
  1. specific compatible && type && name
  2. specific compatible && type
  3. specific compatible && name
  4. specific compatible
  5. general compatible && type && name
  6. general compatible && type
  7. general compatible && name
  8. general compatible
  9. type && name
  10. type
  11. name

v5: Fix nested locking bug
v4: Short-circuit failure cases instead of mucking with score, and
    remove extra __of_device_is_compatible() wrapper stub.
    Move scoring logic directly into __of_device_is_compatible()
v3: Also need to bail out when there does have a compatible member in match
    entry, but it doesn't match with the device node's compatible.
v2: Fix the bug such as we get the same score for the following two match
    entries with the empty node 'name2 { };'
	struct of_device_id matches[] = {
		{.name = "name2", },
		{.name = "name2", .type = "type1", },
		{}
	};
Signed-off-by: NKevin Hao <haokexin@gmail.com>
[grant.likely: added v4 changes]
Signed-off-by: NGrant Likely <grant.likely@linaro.org>
Tested-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: NStephen Chivers <schivers@csc.com>
Tested-by: NSachin Kamat <sachin.kamat@linaro.org>

This reverts commit 2d4054d8 (ACPI: Blacklist Win8 OSI for some HP
laptop 2013 models) that is not necessary any more after previous
commit 1811fcb029fa (ACPI / video: Add systems that should favour native
backlight interface).
Requested-by: NTakashi Iwai <tiwai@suse.de>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Some system's ACPI video backlight control interface is broken and the
native backlight control interface should be used by default. This patch
sets the use_native_backlight parameter to true for those systems so
that video backlight control interface will not be created. For detailed
models that are added here, reference the following list.

Note that the user specified kernel cmdline option will always have the
highest priority, i.e. if use_native_backlight=0 is specified and the
system is in the DMI table, the video module will not skip registering
backlight interface for it.

Thinkpad T430s:
Reported-by: NTheodore Tso <tytso@mit.edu>
Reported-and-tested-by: NPeter Weber <bugs@ttyhoney.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
Thinkpad X230:
Reported-and-tested-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=51231
ThinkPad X1 Carbon:
Reported-and-tested-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com>
Lenovo Yoga 13:
Reported-by: NLennart Poettering <lennart@poettering.net>
Reported-and-tested-by: NKevin Smith <thirdwiggin@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=63811
Dell Inspiron 7520:
Reported-by: NRinat Ibragimov <ibragimovrinat@mail.ru>
Acer Aspire 5733Z:
Reported-by: <sov.info@mail.ru>
References: https://bugzilla.kernel.org/show_bug.cgi?id=62941
Acer Aspire V5-431:
Reported-by: NThomas Christensen <christensenthomas@gmail.com>
References: https://bugzilla.kernel.org/show_bug.cgi?id=68751
HP ProBook 4340s:
Reported-and-tested-by: NVladimir Sherenkov <a_12300@mail.ru>
References: http://redmine.russianfedora.pro/issues/1258
HP EliteBook/ProBook 2013 models, ZBook and some others:
Provided-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Some devices have duplicate entries in there brightness levels table, ie
on my Dell Latitude E6430 the table looks like this:

[    3.686060] acpi backlight index   0, val 80
[    3.686095] acpi backlight index   1, val 50
[    3.686122] acpi backlight index   2, val 5
[    3.686147] acpi backlight index   3, val 5
[    3.686172] acpi backlight index   4, val 5
[    3.686197] acpi backlight index   5, val 5
[    3.686223] acpi backlight index   6, val 5
[    3.686248] acpi backlight index   7, val 5
[    3.686273] acpi backlight index   8, val 6
[    3.686332] acpi backlight index   9, val 7
[    3.686356] acpi backlight index  10, val 8
[    3.686380] acpi backlight index  11, val 9
etc.

Notice that brightness values 0-5 are all mapped to 5. This means that
if userspace writes any value between 0 and 5 to the brightness sysfs attribute
and then reads it, it will always return 0, which is somewhat unexpected.

This is a problem for ie gnome-settings-daemon, which uses read-modify-write
logic when the users presses the brightness up or down keys. This is done
this way to take brightness changes from other sources into account.

On this specific laptop what happens once the brightness has been set to 0,
is that gsd reads 0, adds 5, writes 5, and on the next brightness up key press
again reads 0, so things get stuck at the lowest brightness setting.

Filtering out the duplicate table entries, makes any write to brightness
read back as the written value as one would expect, fixing this.
Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Reviewed-by: NAaron Lu <aaron.lu@intel.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If CONFIG_PM_SLEEP=n:

drivers/mfd/sec-core.c:349: warning: ‘sec_pmic_suspend’ defined but not used
drivers/mfd/sec-core.c:371: warning: ‘sec_pmic_resume’ defined but not used
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If CONFIG_PM_SLEEP=n:

drivers/mfd/max14577.c:177: warning: ‘max14577_suspend’ defined but not used
drivers/mfd/max14577.c:200: warning: ‘max14577_resume’ defined but not used
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we compile the TPS65217 for a 64bit architecture we receive the following
warnings:

drivers/mfd/tps65217.c: In function ‘tps65217_probe’:
drivers/mfd/tps65217.c:173:13:
  warning: cast from pointer to integer of different size
   chip_id = (unsigned int)match->data;
             ^
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we compile the WM8994 for a 64bit architecture we receive the following
warnings:

drivers/mfd/wm8994-core.c: In function ‘wm8994_i2c_probe’:
drivers/mfd/wm8994-core.c:639:19:
  warning: cast from pointer to integer of different size
    wm8994->type = (int)of_id->data;
                   ^
Signed-off-by: NLee Jones <lee.jones@linaro.org>

If we compile the MAX8998 for a 64bit architecture we receive the following
warnings:

  drivers/mfd/max8998.c: In function ‘max8998_i2c_get_driver_data’:
  drivers/mfd/max8998.c:178:10:
    warning: cast from pointer to integer of different size
     return (int)match->data;
            ^
Signed-off-by: NLee Jones <lee.jones@linaro.org>