Previously we masked PCIe Link Control 2 register values with "7 << 9",
which was apparently intended to be the Transmit Margin field, but instead
was the high order bit of Transmit Margin, the Enter Modified Compliance
bit, and the Compliance SOS bit.

Correct the mask to "7 << 7", which is the Transmit Margin field.

Link: https://lore.kernel.org/r/20191112173503.176611-3-helgaas@kernel.orgSigned-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

CIK always uses the legacy pci based reset.
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

With this commit drm/amd/ has no longer any uses of
the deprecated drmP.h header file.
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "David (ChunMing) Zhou" <David1.Zhou@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190609220757.10862-11-sam@ravnborg.org

Add a sysfs file for reporting the number of PCIe replays (NAKs). This
returns the sum of NAKs received and NAKs generated
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The power smu7 powerplay code is much more robust and has
been the default for a while now.  Remove the old code.
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

CIK chips require a reset if the driver was previously loaded
because the SMU can only be loaded once between each reset.

v2: rebase
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Add a sysfs file that reports the number of bytes transmitted and
received in the last second. This can be used to approximate the PCIe
bandwidth usage over the last second.

v2: Clarify use of mps as estimation of bandwidth
v3: Don't make the file on APUs
v4: Early exit for APUs in the read function, change output to
    display "packets-received packets-sent mps"
v5: fix missing header for si (Alex)
Signed-off-by: NKent Russell <kent.russell@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initialize doorbell index for asics vi and cik

v2: Use enum definition instead of hardcoded number
Signed-off-by: NOak Zeng <ozeng@amd.com>
Suggested-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Suggested-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

initialize gfx/sdma before dpm features enabled.
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is
never called in atomic context.
cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not
necessary.
mdelay() can be replaced with msleep().

This is found by a static analysis tool named DCNS written by myself.
Signed-off-by: NJia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Switch hawaii and bonaire to use powerplay rather than the old
dpm implementation.  Powerplay supports more features and is
better maintained.  Ultimately, we can drop the older dpm
implementation like we did for other older asics.
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NRex Zhu <rezhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Used to check on a per SoC basis whether the SoC needs
a full reset of a per IP soft reset.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NHuang Rui <ray.huang@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1. delete amdgpu_powerplay.c used for wrapping smu ip functions
2. delete struct pp_instance,
3. make struct hwmgr as the smu hw handle.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NEvan Quan <evan.quan@amd.com>
Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to replicate it in several places.
Reviewed-by: NRex Zhu <rezhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

No need to replicate it in several places.
Reviewed-by: NRex Zhu <rezhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds an optional ring to the invalidate_hdp and flush_hdp
callbacks. If the ring isn't specified or the emit_wreg function not
available the HDP operation will be done with the CPU otherwise by
writing on the ring.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Acked-by: NChunming Zhou <david1.zhou@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Needed to flush and invalidate the HDP block using the CPU.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NSamuel Li <Samuel.Li@amd.com>

add device to the name for consistency.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add device to the name for consistency.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add device for consistency with other functions in this file.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

add device for consistency with other functions in this file.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Not sure what that should originally been good for, but it doesn't seem
to make any sense any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Using the cached values has less latency for bare metal and
prevents reading back bogus values if the engine is powergated.

This was implemented for VI and SI, but somehow CIK got missed.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Enable DC for DCE8 APUs.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Supported DCE versions: 8.0, 10.0, 11.0, 11.2

v2: rebase against 4.11
Signed-off-by: NHarry Wentland <harry.wentland@amd.com>
Acked-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NYong Zhao <yong.zhao@amd.com>
Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: NOded Gabbay <oded.gabbay@gmail.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

I couldn't figure out what this was original good for, but we
don't use it any more.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Include <drm/*.h> instead of relative path from include/drm, then
remove the -Iinclude/drm compiler flag.
Signed-off-by: NMasahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1493009447-31524-4-git-send-email-yamada.masahiro@socionext.com

This patch introduces a new flag named "amdgpu_firmware_load_type" to
handle different firmware loading method. Since Vega10, there are
three ways to load firmware. It would be better to use a flag and a
fw_load_type kernel parameter to configure it.
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NHuang Rui <ray.huang@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Newer asics use different registers so abstract it.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Check whether we need to post rather than whether the asic is
posted.  There are some cases (e.g., GPU reset or resume from
hibernate) where we need to force post even if the asic has
been posted.
Signed-off-by: NJim Qu <Jim.Qu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NRex Zhu <Rex.Zhu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Call detection function driectly, so remove the interface.

V2: ci and si also need to call the detect function.
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMonk Liu <monk.liu@amd.com>
Acked-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Use acronym to rename fields to make easy to spell out.
Signed-off-by: NXiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Move from asic specific code to common atom code.
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This makes it easier to replace specific IP blocks on
asics for handling virtual_dce, DAL, etc. and for building
IP lists for hw or tables.  This also stored the status
information in the same structure.

v2: split out spelling fix into a separate patch
    add a function to add IPs to the list
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

1,Changes on virtualization detections
2,Don't load smu & mc firmware if using sr-iov bios
3,skip vPost for sriov & force vPost if dev pass-through

v2: agd: squash in Rays's fix for the missed SI case
v3: agd: squash in additional fixes for CIK, SI, cleanup
Signed-off-by: NMonk Liu <Monk.Liu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For virtual display feature, as there may be multiple GPUs,
for user could choose whiche GPU need to enable this feature, change
the type of virtual_display from int to char*. The variable will be set
like this virtual_display="xxxx:xx:xx.x;xxxx:xx:xx.x;".
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Put it in one place.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

For virtual display feature, if user set the option "amdgpu.virtual_display=1"
when load amdgpu.ko. Then need to set the ip_blocks with virtual display ip
blocks. And when enable virtual display, the amdgpu_dal need to be set to zero.
Signed-off-by: NEmily Deng <Emily.Deng@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>