Skip to content

K
Kernel

openeuler / Kernel
1 年多 前同步成功

通知 8
Star 0
Fork 0
K
Kernel
切换分支/标签
  1. 20 4月, 2021 2 次提交
  3. 24 3月, 2021 2 次提交
  5. 18 3月, 2021 1 次提交
  7. 16 3月, 2021 1 次提交
  9. 09 3月, 2021 1 次提交
  11. 04 3月, 2021 1 次提交
    • M
      net: l2tp: reduce log level of messages in receive path, add counter instead · 3e59e885
      由 Matthias Schiffer 提交于 
      Commit 5ee759cd ("l2tp: use standard API for warning log messages")
changed a number of warnings about invalid packets in the receive path
so that they are always shown, instead of only when a special L2TP debug
flag is set. Even with rate limiting these warnings can easily cause
significant log spam - potentially triggered by a malicious party
sending invalid packets on purpose.

In addition these warnings were noticed by projects like Tunneldigger [1],
which uses L2TP for its data path, but implements its own control
protocol (which is sufficiently different from L2TP data packets that it
would always be passed up to userspace even with future extensions of
L2TP).

Some of the warnings were already redundant, as l2tp_stats has a counter
for these packets. This commit adds one additional counter for invalid
packets that are passed up to userspace. Packets with unknown session are
not counted as invalid, as there is nothing wrong with the format of
these packets.

With the additional counter, all of these messages are either redundant
or benign, so we reduce them to pr_debug_ratelimited().

[1] https://github.com/wlanslovenija/tunneldigger/issues/160

Fixes: 5ee759cd ("l2tp: use standard API for warning log messages")
Signed-off-by: NMatthias Schiffer <mschiffer@universe-factory.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      3e59e885
  13. 03 3月, 2021 2 次提交
  15. 28 2月, 2021 1 次提交
  17. 27 2月, 2021 2 次提交
  19. 25 2月, 2021 2 次提交
    • H
      numa balancing: migrate on fault among multiple bound nodes · bda420b9
      由 Huang Ying 提交于 
      Now, NUMA balancing can only optimize the page placement among the NUMA
nodes if the default memory policy is used.  Because the memory policy
specified explicitly should take precedence.  But this seems too strict in
some situations.  For example, on a system with 4 NUMA nodes, if the
memory of an application is bound to the node 0 and 1, NUMA balancing can
potentially migrate the pages between the node 0 and 1 to reduce
cross-node accessing without breaking the explicit memory binding policy.

So in this patch, we add MPOL_F_NUMA_BALANCING mode flag to
set_mempolicy() when mode is MPOL_BIND.  With the flag specified, NUMA
balancing will be enabled within the thread to optimize the page placement
within the constrains of the specified memory binding policy.  With the
newly added flag, the NUMA balancing control mechanism becomes,

 - sysctl knob numa_balancing can enable/disable the NUMA balancing
   globally.

 - even if sysctl numa_balancing is enabled, the NUMA balancing will be
   disabled for the memory areas or applications with the explicit
   memory policy by default.

 - MPOL_F_NUMA_BALANCING can be used to enable the NUMA balancing for
   the applications when specifying the explicit memory policy
   (MPOL_BIND).

Various page placement optimization based on the NUMA balancing can be
done with these flags.  As the first step, in this patch, if the memory of
the application is bound to multiple nodes (MPOL_BIND), and in the hint
page fault handler the accessing node are in the policy nodemask, the page
will be tried to be migrated to the accessing node to reduce the
cross-node accessing.

If the newly added MPOL_F_NUMA_BALANCING flag is specified by an
application on an old kernel version without its support, set_mempolicy()
will return -1 and errno will be set to EINVAL.  The application can use
this behavior to run on both old and new kernel versions.

And if the MPOL_F_NUMA_BALANCING flag is specified for the mode other than
MPOL_BIND, set_mempolicy() will return -1 and errno will be set to EINVAL
as before.  Because we don't support optimization based on the NUMA
balancing for these modes.

In the previous version of the patch, we tried to reuse MPOL_MF_LAZY for
mbind().  But that flag is tied to MPOL_MF_MOVE.*, so it seems not a good
API/ABI for the purpose of the patch.

And because it's not clear whether it's necessary to enable NUMA balancing
for a specific memory area inside an application, so we only add the flag
at the thread level (set_mempolicy()) instead of the memory area level
(mbind()).  We can do that when it become necessary.

To test the patch, we run a test case as follows on a 4-node machine with
192 GB memory (48 GB per node).

1. Change pmbench memory accessing benchmark to call set_mempolicy()
   to bind its memory to node 1 and 3 and enable NUMA balancing.  Some
   related code snippets are as follows,

     #include <numaif.h>
     #include <numa.h>

	struct bitmask *bmp;
	int ret;

	bmp = numa_parse_nodestring("1,3");
	ret = set_mempolicy(MPOL_BIND | MPOL_F_NUMA_BALANCING,
			    bmp->maskp, bmp->size + 1);
	/* If MPOL_F_NUMA_BALANCING isn't supported, fall back to MPOL_BIND */
	if (ret < 0 && errno == EINVAL)
		ret = set_mempolicy(MPOL_BIND, bmp->maskp, bmp->size + 1);
	if (ret < 0) {
		perror("Failed to call set_mempolicy");
		exit(-1);
	}

2. Run a memory eater on node 3 to use 40 GB memory before running pmbench.

3. Run pmbench with 64 processes, the working-set size of each process
   is 640 MB, so the total working-set size is 64 * 640 MB = 40 GB.  The
   CPU and the memory (as in step 1.) of all pmbench processes is bound
   to node 1 and 3. So, after CPU usage is balanced, some pmbench
   processes run on the CPUs of the node 3 will access the memory of
   the node 1.

4. After the pmbench processes run for 100 seconds, kill the memory
   eater.  Now it's possible for some pmbench processes to migrate
   their pages from node 1 to node 3 to reduce cross-node accessing.

Test results show that, with the patch, the pages can be migrated from
node 1 to node 3 after killing the memory eater, and the pmbench score
can increase about 17.5%.

Link: https://lkml.kernel.org/r/20210120061235.148637-2-ying.huang@intel.comSigned-off-by: N"Huang, Ying" <ying.huang@intel.com>
Acked-by: NMel Gorman <mgorman@suse.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      bda420b9
    • H
      bpf: Remove blank line in bpf helper description comment · a7c9c25a
      由 Hangbin Liu 提交于 
      Commit 34b2021c ("bpf: Add BPF-helper for MTU checking") added an extra
blank line in bpf helper description. This will make bpf_helpers_doc.py stop
building bpf_helper_defs.h immediately after bpf_check_mtu(), which will
affect future added functions.

Fixes: 34b2021c ("bpf: Add BPF-helper for MTU checking")
Signed-off-by: NHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: NDaniel Borkmann <daniel@iogearbox.net>
Acked-by: NJesper Dangaard Brouer <brouer@redhat.com>
Link: https://lore.kernel.org/bpf/20210223131457.1378978-1-liuhangbin@gmail.com
      a7c9c25a
  21. 24 2月, 2021 1 次提交
    • J
      io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS · 1c0aa1fa
      由 Jens Axboe 提交于 
      A few reasons to do this:

- The naming of the manager and worker have changed. That's a user visible
  change, so makes sense to flag it.

- Opening certain files that use ->signal (like /proc/self or /dev/tty)
  now works, and the flag tells the application upfront that this is the
  case.

- Related to the above, using signalfd will now work as well.
Signed-off-by: NJens Axboe <axboe@kernel.dk>
      1c0aa1fa
  23. 23 2月, 2021 3 次提交
  25. 17 2月, 2021 4 次提交
    • B
      cxl/mem: Add set of informational commands · 57ee605b
      由 Ben Widawsky 提交于 
      Add initial set of formal commands beyond basic identify and command
enumeration.
Signed-off-by: NBen Widawsky <ben.widawsky@intel.com>
Reviewed-by: NDan Williams <dan.j.williams@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v2)
Link: https://lore.kernel.org/r/20210217040958.1354670-8-ben.widawsky@intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
      57ee605b
    • B
      cxl/mem: Enable commands via CEL · 472b1ce6
      由 Ben Widawsky 提交于 
      CXL devices identified by the memory-device class code must implement
the Device Command Interface (described in 8.2.9 of the CXL 2.0 spec).
While the driver already maintains a list of commands it supports, there
is still a need to be able to distinguish between commands that the
driver knows about from commands that are optionally supported by the
hardware.

The Command Effects Log (CEL) is specified in the CXL 2.0 specification.
The CEL is one of two types of logs, the other being vendor specific.
They are distinguished in hardware/spec via UUID. The CEL is useful for
2 things:
1. Determine which optional commands are supported by the CXL device.
2. Enumerate any vendor specific commands

The CEL is used by the driver to determine which commands are available
in the hardware and therefore which commands userspace is allowed to
execute. The set of enabled commands might be a subset of commands which
are advertised in UAPI via CXL_MEM_SEND_COMMAND IOCTL.

With the CEL enabling comes a internal flag to indicate a base set of
commands that are enabled regardless of CEL. Such commands are required
for basic interaction with the hardware and thus can be useful in debug
cases, for example if the CEL is corrupted.

The implementation leaves the statically defined table of commands and
supplements it with a bitmap to determine commands that are enabled.
This organization was chosen for the following reasons:
- Smaller memory footprint. Doesn't need a table per device.
- Reduce memory allocation complexity.
- Fixed command IDs to opcode mapping for all devices makes development
  and debugging easier.
- Certain helpers are easily achievable, like cxl_for_each_cmd().
Signed-off-by: NBen Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> (v3)
Link: https://lore.kernel.org/r/20210217040958.1354670-7-ben.widawsky@intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
      472b1ce6
    • B
      cxl/mem: Add a "RAW" send command · 13237183
      由 Ben Widawsky 提交于 
      The CXL memory device send interface will have a number of supported
commands. The raw command is not such a command. Raw commands allow
userspace to send a specified opcode to the underlying hardware and
bypass all driver checks on the command. The primary use for this
command is to [begrudgingly] allow undocumented vendor specific hardware
commands.

While not the main motivation, it also allows prototyping new hardware
commands without a driver patch and rebuild.

While this all sounds very powerful it comes with a couple of caveats:
1. Bug reports using raw commands will not get the same level of
   attention as bug reports using supported commands (via taint).
2. Supported commands will be rejected by the RAW command.

With this comes new debugfs knob to allow full access to your toes with
your weapon of choice.
Signed-off-by: NBen Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Reviewed-by: NJonathan Cameron <Jonathan.Cameron@huawei.com>
Cc: Ariel Sibley <Ariel.Sibley@microchip.com>
Link: https://lore.kernel.org/r/20210217040958.1354670-6-ben.widawsky@intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
      13237183
    • B
      cxl/mem: Add basic IOCTL interface · 583fa5e7
      由 Ben Widawsky 提交于 
      Add a straightforward IOCTL that provides a mechanism for userspace to
query the supported memory device commands. CXL commands as they appear
to userspace are described as part of the UAPI kerneldoc. The command
list returned via this IOCTL will contain the full set of commands that
the driver supports, however, some of those commands may not be
available for use by userspace.

Memory device commands first appear in the CXL 2.0 specification. They
are submitted through a mailbox mechanism specified in the CXL 2.0
specification.

The send command allows userspace to issue mailbox commands directly to
the hardware. The list of available commands to send are the output of
the query command. The driver verifies basic properties of the command
and possibly inspect the input (or output) payload to determine whether
or not the command is allowed (or might taint the kernel).

Reported-by: kernel test robot <lkp@intel.com> # bug in earlier revision
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBen Widawsky <ben.widawsky@intel.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com> (v2)
Cc: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/r/20210217040958.1354670-5-ben.widawsky@intel.comSigned-off-by: NDan Williams <dan.j.williams@intel.com>
      583fa5e7
  27. 16 2月, 2021 3 次提交
    • G
      mptcp: add local addr info in mptcp_info · 0caf3ada
      由 Geliang Tang 提交于 
      Add mptcpi_local_addr_used and mptcpi_local_addr_max in struct mptcp_info.
Signed-off-by: NGeliang Tang <geliangtang@gmail.com>
Signed-off-by: NMat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
      0caf3ada
    • L
      binfmt_misc: pass binfmt_misc flags to the interpreter · 2347961b
      由 Laurent Vivier 提交于 
      It can be useful to the interpreter to know which flags are in use.

For instance, knowing if the preserve-argv[0] is in use would
allow to skip the pathname argument.

This patch uses an unused auxiliary vector, AT_FLAGS, to add a
flag to inform interpreter if the preserve-argv[0] is enabled.

Note by Helge Deller:
The real-world user of this patch is qemu-user, which needs to know
if it has to preserve the argv[0]. See Debian bug #970460.
Signed-off-by: NLaurent Vivier <laurent@vivier.eu>
Reviewed-by: NYunQiang Su <ysu@wavecomp.com>
URL: http://bugs.debian.org/970460Signed-off-by: NHelge Deller <deller@gmx.de>
      2347961b
    • P
      netfilter: nftables: introduce table ownership · 6001a930
      由 Pablo Neira Ayuso 提交于 
      A userspace daemon like firewalld might need to monitor for netlink
updates to detect its ruleset removal by the (global) flush ruleset
command to ensure ruleset persistency. This adds extra complexity from
userspace and, for some little time, the firewall policy is not in
place.

This patch adds the NFT_TABLE_F_OWNER flag which allows a userspace
program to own the table that creates in exclusivity.

Tables that are owned...

- can only be updated and removed by the owner, non-owners hit EPERM if
  they try to update it or remove it.
- are destroyed when the owner closes the netlink socket or the process
  is gone (implicit netlink socket closure).
- are skipped by the global flush ruleset command.
- are listed in the global ruleset.

The userspace process that sets on the NFT_TABLE_F_OWNER flag need to
leave open the netlink socket.

A new NFTA_TABLE_OWNER netlink attribute specifies the netlink port ID
to identify the owner from userspace.

This patch also updates error reporting when an unknown table flag is
specified to change it from EINVAL to EOPNOTSUPP given that EINVAL is
usually reserved to report for malformed netlink messages to userspace.
Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
      6001a930
  29. 15 2月, 2021 2 次提交
  31. 13 2月, 2021 3 次提交
  33. 12 2月, 2021 5 次提交
  35. 11 2月, 2021 3 次提交
  37. 10 2月, 2021 1 次提交