The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.

Reconcile the omapdrm and omapdss drivers with the DRM bridge and panel
model by reversing the direction of the DSS device .enable() and
.disable() operations. This completes the move to the DRM bridge model,
with the notable exception of the DSI pipelines that will require more
work.

We also adapt the omapdss shutdown handler dss_shutdown() to shut down
all active pipelines starting from the pipeline output device instead of
the display device.

As a consequence the for_each_dss_display() macro isn't used and can be
removed, and the omapdss_device_get_next() function underlying the macro
can be simplified to search for output devices only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The internal encoders return an error from their .enable() handler when
their are not connected to a dss manager. As the flag used is set and
cleared in the connect and disconnect handlers, this effectively checks
whether the omap_dss_device is connected.

The .enable() handler is called from code paths that access the dss
devices chain from the display device, which is set to NULL when the
device isn't connected, making it impossible to access the device in
that case.

The safety check is thus not needed, remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Tested-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Since commit b4935e3a ("drm/omap: Store bus flags in the
omap_dss_device structure") video mode flags are managed by the omapdss
(and later omapdrm) core based on bus flags stored in omap_dss_device.
This works fine for all devices whose video modes are set by the omapdss
and omapdrm core, but breaks DSI operation as the DSI still uses legacy
code paths and sets the DISPC timings manually.

To fix the problem properly we should move the DSI encoder to the new
encoder model. This will however require a considerable amount of work.
Restore DSI operation by adding back video mode flags handling in the
DSI encoder driver as a hack in the meantime.

Fixes: b4935e3a ("drm/omap: Store bus flags in the omap_dss_device structure")
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-5-laurent.pinchart@ideasonboard.com

Commit edb715df ("drm/omap: dss: dsi: Move initialization code from
bind to probe") moved the of_platform_populate() call from dsi_bind() to
dsi_probe(), but failed to move the corresponding
of_platform_depopulate() from dsi_unbind() to dsi_remove(). This results
in OF child devices being potentially removed multiple times. Fix it by
placing the of_platform_depopulate() call where it belongs.

Fixes: edb715df ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-4-laurent.pinchart@ideasonboard.com

Reading any of the DSI debugfs files results in a crash, as wrong
pointer is passed to the dump functions, and the dump functions use a
wrong pointer. This patch fixes DSI debug dumps.

Fixes: f3ed97f9 ("drm/omap: dsi: Simplify debugfs implementation")
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190111035120.20668-3-laurent.pinchart@ideasonboard.com

After the changes from 4.20 the DSI encoder tries to find the
attached panel before populating the DSI bus. If the panel is
not found -EPROBE_DEFER is returned, so the DSI bus is never
populated and the panel never added.

Fix this by populating the DSI bus before searching for the
video sink in dsi_init_output().

Fixes: 27d62452 ("drm/omap: dss: Acquire next dssdev at probe time")
Acked-by: NPavel Machek <pavel@ucw.cz>
Tested-by: NTony Lindgren <tony@atomide.com>
Tested-by: NPavel Machek <pavel@ucw.cz>
Signed-off-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181121160916.22017-3-sebastian.reichel@collabora.com

We're missing a call to of_platform_depopulate() on errors for dsi.
Looks like dss is already doing this.
Signed-off-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106152802.38599-1-tony@atomide.com

The internal encoders (DSI, HDMI4, HDMI5 and VENC) runtime PM handlers
attempt to manage the runtime PM state of the connected DISPC, based on
the rationale that the DISPC providing data to the encoders requires
ensuring that the display is active whenever the encoders are active.

While the DISPC provides data to the encoders, it doesn't as such
constitute a resource that encoders require in order to be taken out
of suspend, contrary to for instance a functional clock or a power
supply. Encoders registers can be accessed without the DISPC being
active, and while the encoders will not output any video stream without
being fed by the DISPC, the DISPC PM state doesn't influence the
encoders PM state.

For this reason the DISPC PM state is better managed from the omapdrm
driver, in the CRTC enable and disable operations. This allows the
encoders PM state to be handled separately from the DISPC, and in
particular at times when the DISPC may not be available (for instance at
probe due to the DSS probe being deferred, or at remove time du to the
DISPC being already removed).

Fixes: edb715df ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-5-laurent.pinchart@ideasonboard.com

The probe function performs hardware access to read the number of
supported data lanes from a configuration register and thus requires the
device to be active. Ensure this by surrounding the access with
dsi_runtime_get() and dsi_runtime_put() calls.

Fixes: edb715df ("drm/omap: dss: dsi: Move initialization code from bind to probe")
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NTony Lindgren <tony@atomide.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181110111654.4387-4-laurent.pinchart@ideasonboard.com

The video timings are stored in the CRTC structure by the
omap_crtc_dss_set_timings() function, called by dss_mgr_set_timings()
from the .enable() operation of the internal encoders. This instead
belongs to the .set_timings() code paths. Move the
omap_crtc_dss_set_timings() calls accordingly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DSI encoder modifies the passed videomode to take the requirements
of the internal DISPC-DSI bus into account in the .enable_video_output()
operation. This should be performed in the .check_timings() operation
instead. There is however no .check_timings() operation as the DSI
encoder uses a custom API, so move it to the closest match which is the
.set_config() operation.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Source components in the display pipeline need to configure their output
signals polarities and clock driving edge based on the requirements of
the sink component.

Those requirements are currently shared across the whole pipeline in the
flags of a videomode structure, instead of being local to each bus. This
both prevents multiple buses from having different configurations (when
the hardware supports it), and makes it difficult to move from videomode
to drm_display_mode as the latter doesn't contain bus polarities and
clock edge flags.

Add a bus_flags field to the omap_dss_device structure and move the
DISPLAY_FLAGS_DE_(LOW|HIGH), DISPLAY_FLAGS_PIXDATA_(POS|NEG)EDGE and
DISPLAY_FLAGS_SYNC_(POS|NEG)EDGE videomode flags to bus_flags in all
external encoders, connectors and panels. The videomode flags are still
used internally for internal encoders, this will be addressed in a
second step.

The related videomode flags in the default mode of the DVI connector can
simply be dropped, as they are always overridden by the TFP410 driver.
Note that this results in both the DISPLAY_FLAGS_SYNC_POSEDGE and
DISPLAY_FLAGS_SYNC_NEGEDGE flags being set, which is invalid, but only
the former is tested for when programming the DISPC, so the DVI
connector flags are effectively overridden by the TFP410 flags.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The dss_mgr .connect() and .disconnect() are implemented as no-op in
omapdrm. The operations are unneeded, remove them.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_dss_device.dispc_channel_connect field is used by DSS outputs
to fail the .enable() operation if they're not connected. Set the field
directly from the (dis)connect handlers of the DSS outputs instead of
going through the CRTC dss_mgr operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

To simplify the pipeline disconnection handling merge the
omapdss_device_disconnect() and omapdss_output_unset_device() functions.
The device state check is now called for every device in the pipeline,
extending this sanity check coverage.

There is no need to return an error from omapdss_device_disconnect()
when the check fails, as omapdss_output_unset_device() used to do, given
that we can't prevent disconnection due to device unbinding (the return
value of omapdss_output_unset_device() is never checked in the current
code for that reason).
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The display type is validated when the display is connected to the DSS
output. We already have all the information we need for validation when
initializing the outputs. Move validation to output initialization to
simplify pipeline connection handling.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omapdrm and omapdss drivers are architectured based on display
pipelines made of multiple components handled from sink (display) to
source (DSS output). This is incompatible with the DRM bridge and panel
APIs that handle components from source to sink.

To reconcile the omapdrm and omapdss drivers with the DRM bridge and
panel model, we need to reverse the direction of the DSS device
operations. Start with the connect and disconnect operations.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Regulators for the DPI, DSI, HDMI, SDI and VENC outputs are all looked
up when connecting the output omap_dss_device. There's no need to delay
regulator handling to that time, get the regulators at probe time.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The dss_mgr_connect() and dss_mgr_disconnect() functions take two
omap_dss_device pointers as parameters, which are always set to the same
value by all callers. Remove the duplicated pointer.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Look up the next dssdev at probe time based on device tree links for all
DSS outputs and encoders. This will be used to reverse the order of the
dssdev connect and disconnect call chains.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

There's no reason to delay initialization of most of the driver (such as
mapping memory I/O or enabling runtime PM) to the component bind
handler. Perform as much of the initialization as possible at probe
time, initializing at bind time only the parts that depends on the DSS.
The cleanup code is moved from unbind to remove in a similar way.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Rename the jump labels according to the cleanup they perform, not the
location they're accessed from, and move functions from error checks to
cleanup paths, and move reference handling to simplify cleanup.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The omap_dss_device port_num field stores the DT port number associated
with the device. The field is used in different ways depending on the
device type:

- For DPI outputs, the port number is used as an identifier of the DPI
instance

- For sources, the port number is used to look up the omap_dss_device by
DT port node

As omap_dss_device instances are only looked up as sources by sinks,
setting the field to the number of the source port works for both use
cases.

However, to enable looking up sinks, we need to record all the ports
associated with an omap_dss_device. Do so by turning the port_num field
into an of_ports bitmask. For DPI outputs the port number is
additionally stored in the dpi_data structure as the output ID.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The output devices list isn't used anymore, all output devices are
accessed through the global devices list. Remove it.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DSI clocks are dumped in the DSS-level debugfs clocks file. This
complicates the implementation as the DSI private data has to be looked
up through the outputs list. Simplify it by creating two debugfs files,
dsi1_clks and dsi2_clks, to dump the DSI clocks.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The DSI debugfs regs and irqs show handlers received a pointer to the
DSI private data. There's no need to look it up from the list of DSS
outputs. Use the pointer directly, this allows simplifying the
implementation of the handlers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The encoders duplicate the same omap_dss_device src and dst fields set
and checks in their connect and disconnect handlers. Move the code to
the connect and disconnect wrappers.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

The various types of omapdss_*_ops structures define multiple operations
that are not specific to a bus type. To simplify the code and remove
dependencies on specific bus types move those operations to a common
structure. Operations that are specific to a bus type are kept in the
specialized ops structures.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

Change tomi.valkeinen@nokia.com to tomi.valkeinen@ti.com.
Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com>

This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

This removes the need to access the global DISPC private data in those
functions (both for the current accesses and the future ones that will
be introduced when allocating the DISPC private data dynamically).

In order to allow the omapdrm side to call the dispc_ops with a DISPC
pointer, we also introduce a new function dss_get_dispc() to retrieve
the DISPC corresponding to the DSS.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

The dss_mgr_*() functions take a channel argument to identify the
channel they operate on. This prevents the functions from accessing
driver data structures without resorting to global variables. In an
effort to remove global variables, pass the omap_dss_device pointer
associated with the channel instead. This will be used to look up the
omap_drm_private data structure to pass to the dss_mgr_ops.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

The dsi_display_init_dispc() and dsi_display_uninit_dispc() functions
take a channel argument that is reduntant as it is always identical to
the dsi->output.dispc_channel. Remove the argument and use the field
directly in the functions to avoid misuse.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

The dsi_data structure stores a pointer to a struct platform_device. The
driver only uses the dev member of the platform device structure. Store
the struct device pointer instead and use it directly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

The dsi_bind() function receives a pointer to a struct device that it
casts to a struct platform_device, only to use the platform device's dev
field through the code. Use the dev pointer directly.

While at it rename the struct platform_device pointer dsidev to pdev to
make it more explicit.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

The dsi_get_dsidrv_data() and dsi_get_dsidev_from_dssdev() inline
functions convert a struct omap_dss_device pointer to the corresponding
struct platform_device, and a struct platform_device pointer to the
corresponding struct dsi_data. They are nearly always called together
without any use of the intermediate platform_device, so combine them
into a single function.

In the three locations where only dsi_get_dsidrv_data() is used, call
dev_get_drvdata() directly.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

Internal dsi functions take a pointer to the DSI platform_device and
then cast it to a dsi_data pointer. That's pointless as the caller
already has the dsi_data pointer. Pass it directly instead of the
platform_device pointer.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

As part of an effort to remove the usage of global variables in the
driver, store the debugfs root directory in the dss_device structure
instead of a global variable.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

As part of an effort to remove the usage of global variables in the
driver, store the registered plls array in the dss_device structure
instead of a global variable.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>

To simplify implementation of debugfs seq_file show handlers, the driver
passes the pointer to the show function through the debugfs_create_file
data pointer. This prevents using the pointer to pass driver private
data to the show handler, and requires all handlers to use global
variables to access private data.

To prepare for the removal of global private data in the driver, rework
the debugfs infrastructure to allow passing a private data pointer to
show handlers.

The price to pay is explicit removal of debugfs files to free the
internally allocated memory. This is desirable anyway as debugfs entries
should be removed when a component driver is unbound, otherwise crashes
will occur due to access to freed memory when the components will be
dynamically allocated instead of stored in global variables.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: NSebastian Reichel <sebastian.reichel@collabora.co.uk>