- 26 7月, 2019 4 次提交
-
-
由 Pascal van Leeuwen 提交于
Fixed issues with the skcipher and AEAD scatter/gather list to engine descriptor conversion code which caused either too much or too little buffer space to be provided to the hardware. This caused errors with the testmgr extra tests, either kernel panics (on x86-EIP197-FPGA) or engine descriptor errors 0x1, 0x8 or 0x9 (on Macchiatobin e.g. Marvell A8K). With this patch in place, all skcipher and AEAD (extra) tests pass. Signed-off-by: NPascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Pascal van Leeuwen 提交于
This patch fixes corruption issues with the skcipher output IV witnessed on x86+EIP197-FPGA (devboard). The original fix, commit 57660b11 ("crypto: inside-secure - implement IV retrieval"), attempted to write out the result IV through the context record. However, this is not a reliable mechanism as there is no way of knowing the hardware context update actually arrived in memory, so it is possible to read the old contents instead of the updated IV. (and indeed, this failed for the x86/FPGA case) The alternative approach used here recognises the fact that the result IV for CBC is actually the last cipher block, which is the last input block in case of decryption and the last output block in case of encryption. So the result IV is taken from the input data buffer respectively the output data buffer instead, which *is* reliable. Signed-off-by: NPascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Pascal van Leeuwen 提交于
Driver was printing an error message for certain input error cases that should just return -EINVAL, which caused the related testmgr extra tests to flood the kernel message log. Ensured those cases remain silent while making some other device-specific errors a bit more verbose. Signed-off-by: NPascal van Leeuwen <pvanleeuwen@verimatrix.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Pascal van Leeuwen 提交于
The driver incorrectly advertised the IV size for DES and 3DES ECB mode as being the DES blocksize of 8. This is incorrect as ECB mode does not need any IV. Signed-off-by: NPascal van Leeuwen <pvanleeuwen@verimatrix.com> Acked-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 06 6月, 2019 14 次提交
-
-
由 Antoine Tenart 提交于
When performing a transformation the hardware is given result descriptors to save the result data. Those result descriptors are batched using a 'first' and a 'last' bit. There are cases were more descriptors than needed are given to the engine, leading to the engine only using some of them, and not setting the last bit on the last descriptor we gave. This causes issues were the driver and the hardware aren't in sync anymore about the number of result descriptors given (as the driver do not give a pool of descriptor to use for any transformation, but a pool of descriptors to use *per* transformation). This patch fixes it by attaching the number of given result descriptors to the requests, and by using this number instead of the 'last' bit found on the descriptors to process them. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
Replace sg_nents_for_len by sg_nents when DMA mapping/unmapping buffers and when looping over the SG entries. This fix cases where the SG entries aren't used fully, which would in such cases led to using fewer SG entries than needed (and thus the engine wouldn't have access to the full input data and the result would be wrong). Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds support for HMAC updates in the Inside Secure SafeXcel crypto engine driver. Updates were supported for hash algorithms, but were never enabled for HMAC ones. This fixes boot time test issues. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds support for retrieving intermediate IV from the crypto engine when using the CBC block mode with AES and (3)DES. The retrieved IV is copied to the request IV buffer, as requested by the kernel crypto API. This fix boot tests added by commit 8efd972e ("crypto: testmgr - support checking skcipher output IV"). Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch fixes the queued len computation, which could theoretically be wrong if req->len[1] - req->processed[1] > 1. Be future-proof here, and fix it. Fixes: b460edb6 ("crypto: inside-secure - sha512 support") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
A request is zeroed in safexcel_ahash_exit_inv(). This request total size is EIP197_AHASH_REQ_SIZE while the memset zeroing it uses sizeof(struct ahash_request), which happens to be less than EIP197_AHASH_REQ_SIZE. This patch fixes it. Fixes: f6beaea3 ("crypto: inside-secure - authenc(hmac(sha256), cbc(aes)) support") Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch unify the way the cache related data is zeroed when the cache buffer is DMA unmapped. It should not change the driver behaviour, but improves the code safety and readability. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
The context given to the crypto engine can be reused over time. While the driver was designed to allow this, the feature wasn't enabled in the hardware engine. This patch enables it. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch changes the error reported by the Inside Secure SafeXcel driver when a result descriptor reports an error, from -EIO to -EINVAL, as this is what the crypto framework expects. This was found while running the crypto extra tests. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
The result descriptors contain errors, which are represented as a bitmap. This patch updates the error message to not treat the error as a decimal value, but as an hexadecimal one. This helps in knowing the value does not have a direct meaning (the set bits themselves have). Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
When sending an ahash request, the code checks for the extra variable not to be 0. This check is useless as the extra variable can't be 0 at this point (it is checked on the line just before). This patch does not modify the driver behaviour in any way. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This cosmetic patch fixes a cosmetic issue with if brackets. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This cosmetic patch moves a comment before the condition it is related to. The patch does not change the driver behaviour in any way. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
Cosmetic patch removing an empty line in the skcipher token creation routine. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 21 5月, 2019 1 次提交
-
-
由 Thomas Gleixner 提交于
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 18 4月, 2019 1 次提交
-
-
由 Herbert Xu 提交于
This patch forbids the use of 2-key 3DES (K1 == K3) in FIPS mode. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 25 1月, 2019 1 次提交
-
-
由 Eric Biggers 提交于
CRYPTO_TFM_REQ_WEAK_KEY confuses newcomers to the crypto API because it sounds like it is requesting a weak key. Actually, it is requesting that weak keys be forbidden (for algorithms that have the notion of "weak keys"; currently only DES and XTS do). Also it is only one letter away from CRYPTO_TFM_RES_WEAK_KEY, with which it can be easily confused. (This in fact happened in the UX500 driver, though just in some debugging messages.) Therefore, make the intent clear by renaming it to CRYPTO_TFM_REQ_FORBID_WEAK_KEYS. Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 20 11月, 2018 1 次提交
-
-
由 Eric Biggers 提交于
Remove the unnecessary setting of CRYPTO_ALG_TYPE_SKCIPHER. Commit 2c95e6d9 ("crypto: skcipher - remove useless setting of type flags") took care of this everywhere else, but a few more instances made it into the tree at about the same time. Squash them before they get copy+pasted around again. This patch shouldn't change any actual behavior. Signed-off-by: NEric Biggers <ebiggers@google.com> Acked-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 06 10月, 2018 1 次提交
-
-
由 Kees Cook 提交于
As done treewide earlier, this catches several more open-coded allocation size calculations that were added to the kernel during the merge window. This performs the following mechanical transformations using Coccinelle: kvmalloc(a * b, ...) -> kvmalloc_array(a, b, ...) kvzalloc(a * b, ...) -> kvcalloc(a, b, ...) devm_kzalloc(..., a * b, ...) -> devm_kcalloc(..., a, b, ...) Signed-off-by: NKees Cook <keescook@chromium.org>
-
- 20 7月, 2018 2 次提交
-
-
由 Antoine Tenart 提交于
In the cipher safexcel_send_req function, GCC warns that first_rdesc may be used uninitialized. While this should never happen, this patch removes the warning by initializing this variable to NULL to make GCC happy. This was reported by the kbuild test robot. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
Use the appropriate SPDX license identifiers and drop the license text. This patch is only cosmetic. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
- 09 7月, 2018 15 次提交
-
-
由 Eric Biggers 提交于
Some crypto API users allocating a tfm with crypto_alloc_$FOO() are also specifying the type flags for $FOO, e.g. crypto_alloc_shash() with CRYPTO_ALG_TYPE_SHASH. But, that's redundant since the crypto API will override any specified type flag/mask with the correct ones. So, remove the unneeded flags. This patch shouldn't change any actual behavior. Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Eric Biggers 提交于
Some skcipher algorithms set .cra_flags = CRYPTO_ALG_TYPE_SKCIPHER. But this is redundant with the C structure type ('struct skcipher_alg'), and crypto_register_skcipher() already sets the type flag automatically, clearing any type flag that was already there. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the skcipher algorithms. This patch shouldn't change any actual behavior. Signed-off-by: NEric Biggers <ebiggers@google.com> Acked-by: NGilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Eric Biggers 提交于
Some aead algorithms set .cra_flags = CRYPTO_ALG_TYPE_AEAD. But this is redundant with the C structure type ('struct aead_alg'), and crypto_register_aead() already sets the type flag automatically, clearing any type flag that was already there. Apparently the useless assignment has just been copy+pasted around. So, remove the useless assignment from all the aead algorithms. This patch shouldn't change any actual behavior. Signed-off-by: NEric Biggers <ebiggers@google.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch main goal is to improve driver performance by moving the crypto request from a list to a RDR ring shadow. This is possible since there is one producer and one consume for this RDR request shadow and one ring descriptor is left unused. Doing this change eliminates the use of spinlock when accessing the descriptor ring and the need to dynamicaly allocate memory per crypto request. The crypto request is placed in the first RDR shadow descriptor only if there are enough descriptors, when the result handler is invoked, it fetches the first result descriptor from RDR shadow. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch adds support for two new algorithms in the Inside Secure SafeXcel cryptographic engine driver: ecb(des3_ede) and cbc(des3_ede). Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch adds support for two algorithms in the Inside Secure SafeXcel cryptographic engine driver: ecb(des) and cbc(des). Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch adds support for the hmac(md5) algorithm in the Inside Secure SafeXcel cryptographic engine driver. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch adds the MD5 algorithm support to the Inside Secure SafeXcel cryptographic engine driver. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
The ORO bridge (connected to the EIP197 write channel) does not generate back pressure towards the EIP197 when its internal FIFO is full. It assumes that the EIP will not drive more write transactions than the maximal supported outstanding (32). Hence tx_max_cmd_queue must be configured to 5 (or less). Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch adds extra steps in the module removal path, to reset the command and result rings. The corresponding interrupts are cleared, and the ring address configuration is reset. Signed-off-by: NOfer Heifetz <oferh@marvell.com> [Antoine: small reworks, commit message] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
This patch updates the TRC configuration so that the version of the EIP197 engine being used is taken into account, as the configuration differs between the EIP197B and the EIP197D. Signed-off-by: NOfer Heifetz <oferh@marvell.com> [Antoine: commit message] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
This patch adds support for the eip197d engine to the Inside Secure SafeXcel cryptographic driver. This new engine is similar to the eip197b and reuse most of its code. Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
So far a single processing engine (PE) was configured and used in the Inside Secure SafeXcel cryptographic engine driver. Some versions have more than a single PE. This patch rework the driver's initialization to take this into account and to allow configuring more than one PE. Signed-off-by: NOfer Heifetz <oferh@marvell.com> [Antoine: some reworks and commit message.] Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Ofer Heifetz 提交于
The Inside Secure SafeXcel driver currently uses 4 rings, but the eip197d engines has 8 of them. This patch updates the driver so that rings are allocated dynamically based on the number of available rings supported by a given engine. Signed-off-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-
由 Antoine Tenart 提交于
Add a flags field in the private structure, and a first flag for engines needing context invalidation (currently only the eip197b). The invalidation is needed when the engine includes a TRC cache, which will also be true for the upcoming addition of the eip197d engine. Suggested-by: NOfer Heifetz <oferh@marvell.com> Signed-off-by: NAntoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
-