Otherwise we might not have a sensible clocking setup ready.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Make sure we update for any changes in cases where we reconfigure while
live (eg, for analogue bypass).
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Show the id we read when the id mismatch is detected.
This is useful for debugging.
Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NAxel Lin <axel.lin@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Improves performance on power up.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The main role of the WM9081 is as a class D speaker amplifier so there
is no concern about pops. There are also very few registers and a fast
power up time so we can happily mark the driver as idle_bias_off.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Better style and better supports idle_bias_off which we're going to
implement.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Ensure we're in a known state when we restart.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Raise the ramp time to 50ms to cover corner cases, use the startup bias
generator, explicitly reset the ramp circuit when complete and reorder
things all of which should improve performance somewhat for systems that
are sensitive to noise from VMID.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Reduces the amount of time taken to stabilise them.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The enable of the single ended line outputs on wm_hubs devices performs
better if the output is enabled prior to starting VMID. Since inactive
outputs are held at VMID anyway there is little cost to doing this for
unused outputs. Add callbacks into wm_hubs and keep track of which outputs
are really active so we can disable them once we're active.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

According to the mixer path diagram input sources' attenuators logically
belong to the playback path and DMIC boost only affects capture.
Signed-off-by: NPaul Fertser <fercerpav@gmail.com>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This brings the TLVs in sync with the documentation and allows to properly
manipulate mic boost controls with alsamixer.
Signed-off-by: NPaul Fertser <fercerpav@gmail.com>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This patch should fix output through speakers using HP mixer.
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fix I2S digital interface power for recording.
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Add DMIC switches and controls to ALC5632 codec.
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Refactored DAPM routes to add voice support.

- Added undocumented register
- Used AIF in/out
- Added missed voice items and routes
- Added DMIC input
- Romoved unrelevant items
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

There is no Phone Mix<->Mono Mix route in datasheet.
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Rename capture switches to common scheme XXX2REC.
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Add voice DAC playback switch.
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Remove extra zero from volume step in DECLARE_TLV_DB_SCALE macro.
Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NAndrey Danin <danindrey@mail.ru>
Signed-off-by: NLeon Romanovsky <leon@leon.nu>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Correct spelling "memroy" to "memory" in
sound/soc/codecs/twl4030.c
Signed-off-by: NMasanari Iida <standby24x7@gmail.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The device is generally not succeptible to the issues that cause this to
be an issue.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

It's set unconditionally.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NLiam Girdwood <lrg@ti.com>
Acked-by: NPeter Ujfalusi <peter.ujfalusi@ti.com>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

The VMID ramp rate is supposed to be 0x3, not 11b. Fix that.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org

Make sure we generate enough BCLKs for I2S style modes by always having
a minimum of two channels worth of clocks for the BCLK.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

No practical impact but now we have the control type we may as well use
it for the slightly nicer sequencing.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Now that we're not implementing GPIO or microphone detection support
there's no users for the read() function any more.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: NJarkko Nikula <jarkko.nikula@bitmer.com>

Make the mechanism used for WM8994 more like that for WM1811 and WM8958:
provide the logic to distinguish between headphone and headset and hard
code the reporting of sensible SND_JACK values. Should integration with
other detection mechanisms be required we can add appropriate callbacks
(though some integrations should be able to use the subsystem ones).
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Otherwise we might get an error if the GPIO is configured as an input
since that makes the register volatile and a suspended device can't be
read from.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

This is the default state that the runtime PM infrastructure expects so
instead just kick the runtime PM core to suspend us if we're not doing
anything (as is default).
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>

Fix build breakage by using the correct API call to add kcontrols.
Signed-off-by: NLiam Girdwood <lrg@ti.com>
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>