- 03 8月, 2021 9 次提交
-
-
由 Yifan Zhang 提交于
If GC has entered CGPG, ringing doorbell > first page doesn't wakeup GC. Enlarge CP_MEC_DOORBELL_RANGE_UPPER to workaround this issue. Signed-off-by: NYifan Zhang <yifan1.zhang@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
It is to workaround HW bug on other Asics and based on reverting two commits back: drm/amdkfd: Add heavy-weight TLB flush after unmapping drm/amdkfd: Add memory sync before TLB flush on unmap Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Reviewed-by: NFelix Kuehling <Felix.Kuehling@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 53d05330. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 4bba567c. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 4e7b93ca. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 7ed9876c. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 024d8811. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 430f8e6e. Revert reason: Issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 xinhui pan 提交于
If one GTT BO has been evicted/swapped out, it should sit in CPU domain. TTM only alloc struct ttm_resource instead of struct ttm_range_mgr_node for sysMem. Now when we update mapping for such invalidated BOs, we might walk out of bounds of struct ttm_resource. Three possible fix: 1) Let sysMem manager alloc struct ttm_range_mgr_node, like ttm_range_manager does. 2) Pass pages_addr to update_mapping function too, but need memset pages_addr[] to zero when unpopulate. 3) Init amdgpu_res_cursor directly. bug is detected by kfence. ================================================================== BUG: KFENCE: out-of-bounds read in amdgpu_vm_bo_update_mapping+0x564/0x6e0 Out-of-bounds read at 0x000000008ea93fe9 (64B right of kfence-#167): amdgpu_vm_bo_update_mapping+0x564/0x6e0 [amdgpu] amdgpu_vm_bo_update+0x282/0xa40 [amdgpu] amdgpu_vm_handle_moved+0x19e/0x1f0 [amdgpu] amdgpu_cs_vm_handling+0x4e4/0x640 [amdgpu] amdgpu_cs_ioctl+0x19e7/0x23c0 [amdgpu] drm_ioctl_kernel+0xf3/0x180 [drm] drm_ioctl+0x2cb/0x550 [drm] amdgpu_drm_ioctl+0x5e/0xb0 [amdgpu] kfence-#167 [0x000000008e11c055-0x000000001f676b3e ttm_sys_man_alloc+0x35/0x80 [ttm] ttm_resource_alloc+0x39/0x50 [ttm] ttm_bo_swapout+0x252/0x5a0 [ttm] ttm_device_swapout+0x107/0x180 [ttm] ttm_global_swapout+0x6f/0x130 [ttm] ttm_tt_populate+0xb1/0x2a0 [ttm] ttm_bo_handle_move_mem+0x17e/0x1d0 [ttm] ttm_mem_evict_first+0x59d/0x9c0 [ttm] ttm_bo_mem_space+0x39f/0x400 [ttm] ttm_bo_validate+0x13c/0x340 [ttm] ttm_bo_init_reserved+0x269/0x540 [ttm] amdgpu_bo_create+0x1d1/0xa30 [amdgpu] amdgpu_bo_create_user+0x40/0x80 [amdgpu] amdgpu_gem_object_create+0x71/0xc0 [amdgpu] amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x2f2/0xcd0 [amdgpu] kfd_ioctl_alloc_memory_of_gpu+0xe2/0x330 [amdgpu] kfd_ioctl+0x461/0x690 [amdgpu] Signed-off-by: Nxinhui pan <xinhui.pan@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
- 30 7月, 2021 4 次提交
-
-
由 Dave Airlie 提交于
Merge tag 'amd-drm-next-5.15-2021-07-29' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by: NDave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
-
https://gitlab.freedesktop.org/drm/msm由 Dave Airlie 提交于
An early pull for v5.15 (there'll be more coming in a week or two), consisting of the drm/scheduler conversion and a couple other small series that one was based one. Mostly sending this now because IIUC danvet wanted it in drm-next so he could rebase on it. (Daniel, if you disagree then speak up, and I'll instead include this in the main pull request once that is ready.) This also has a core patch to drop drm_gem_object_put_locked() now that the last use of it is removed. [airlied: add NULL to drm_sched_init] Signed-off-by: NDave Airlie <airlied@redhat.com> From: Rob Clark <robdclark@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGumRk7H88bqV=H9Fb1SM0zPBo5B7NsCU3jFFKBYxf5k+Q@mail.gmail.com
-
git://anongit.freedesktop.org/drm/drm-misc由 Dave Airlie 提交于
drm-misc-next for v5.15: UAPI Changes: - Add modifiers for arm fixed rate compression. Cross-subsystem Changes: - Assorted dt binding fixes. - Convert ssd1307fb to json-schema. - Update a lot of irc channels to point to OFTC, as everyone moved there. - Fix the same divide by zero for asilantfb, kyro, rivafb. Core Changes: - Document requirements for new atomic properties. - Add drm_gem_fb_(begin/end)_cpu_access helpers, and use them in some drivers. - Document drm_property_enum.value for bitfields. - Add explicit _NO_ for MIPI_DSI flags that disable features. - Assorted documentation fixes. - Update fb_damage handling, and move drm_plane_enable_fb_damage_clips to core. - Add logging and docs to RMFB ioctl. - Assorted small fixes to dp_mst, master handling. - Clarify drm lease usage. Driver Changes: - Assorted small fixes to panfrost, hibmc, bridge/nwl-dsi, rockchip, vc4. - More drm -> linux irq conversions. - Add support for some Logic Technologies and Multi-Inno panels. - Expose phy-functionality for drm/rockchip, to allow controlling from the media subsystem. - Add support for 2 AUO panels. - Add damage handling to ssd1307fb. - Improve FIFO handling on mxsfb. - Assorted small fixes to vmwgfx, and bump version to 2.19 for the new ioctls. - Improve sony acx424akp backlight handling. Signed-off-by: NDave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/a753221a-e23e-0dc4-7ca6-8c1b179738d0@linux.intel.com
-
git://linuxtv.org/pinchartl/media由 Dave Airlie 提交于
- R-Car DU shutdown fixes - R-Car DU conversion to bridge connector helper - Misc small fixes Signed-off-by: NDave Airlie <airlied@redhat.com> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.freedesktop.org/patch/msgid/YQGHjOSOw2G4+A3x@pendragon.ideasonboard.com
-
- 29 7月, 2021 27 次提交
-
-
由 Maxime Ripard 提交于
Commit 91e99e11 ("drm/vc4: hdmi: Register HDMI codec") removed the references to the vc4_hdmi_audio_component_drv structure, but not the structure itself resulting in a warning. Remove it. Fixes: 91e99e11 ("drm/vc4: hdmi: Register HDMI codec") Reported-by: Nkernel test robot <lkp@intel.com> Signed-off-by: NMaxime Ripard <maxime@cerno.tech> Reviewed-by: NDave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-2-maxime@cerno.tech
-
由 Maxime Ripard 提交于
The vc4_hdmi_audio_prepare function and the functions it's calling have in several occurences multiple dereferences of either the sample rate or the number of channels. It turns out that these variables are also passed through the hdmi codec parameters structure. Convert all the users to use this structure, and if it's used multiple times use a variable to store it instead of dereferencing it every time. Reviewed-by: NNicolas Saenz Julienne <nsaenz@kernel.org> Signed-off-by: NMaxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210707093632.1468127-1-maxime@cerno.tech
-
由 Desmond Cheong Zhi Xi 提交于
We make the following changes to the documentation of drm leases to make it easier to reason about their usage. In particular, we clarify the lifetime and locking rules of lease fields in drm_master: 1. Make it clear that &drm_device.mode_config.idr_mutex protects the lease idr and list structures for drm_master. The lessor field itself doesn't need to be protected as it doesn't change after it's set in drm_lease_create. 2. Add descriptions for the lifetime of lessors and leases. 3. Add an overview DOC: section in drm-uapi.rst that defines the terminology for drm leasing, and explains how leases work and why they're used. Signed-off-by: NDesmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210728102739.441543-1-desmondcheongzx@gmail.com
-
由 Luben Tuikov 提交于
Fix a bug in smu_cmn_send_msg_without_waiting() in that this function does not need to take the smu->message_lock mutex in order to send a message down to the SMU. The mutex is acquired by the caller of this function instead. Cc: Alex Deucher <Alexander.Deucher@amd.com> Cc: Changfeng Zhu <Changfeng.Zhu@amd.com> Cc: Huang Rui <ray.huang@amd.com> Fixes: 5810323b ("drm/amd/pm: Fix a bug communicating with the SMU (v5)") Signed-off-by: NLuben Tuikov <luben.tuikov@amd.com> Reviewed-by: NAlex Deucher <Alexander.Deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Huang Rui 提交于
The function is ready on psp firmware, and enable it by default. Signed-off-by: NHuang Rui <ray.huang@amd.com> Reviewed-by: NTao Zhou <tao.zhou1@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Likun Gao 提交于
Fence driver was enabled per ring when sw init on per IP block before. Change to enable all the fence driver at the same time after amdgpu_device_ip_init finished. Rename some function related to fence to make it reasonable for read. Signed-off-by: NLikun Gao <Likun.Gao@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
Added BL loading support for soc/intf/dbg drivers Signed-off-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
Remove duplicate code Signed-off-by: NJohn Clements <john.clements@amd.com> Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
Detect psp driver binaries packed into FW and try to load the FW Signed-off-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 John Clements 提交于
Improved handling for scalling PSP FW binaries Signed-off-by: NJohn Clements <john.clements@amd.com> Reviewed-by: NHawking Zhang <Hawking.Zhang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Huang Rui 提交于
It won't need to clear the xxx_PSP_DEBUG registers, because firmware will handle this change. Signed-off-by: NHuang Rui <ray.huang@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
On platforms that support multiple backlights, register each one separately. This lets us manage them independently rather than registering a single backlight and applying the same settings to both. v2: fix typo: Reported-by: Nkernel test robot <lkp@intel.com> Reviewed-by: NRoman Li <Roman.Li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Linus Walleij 提交于
This converts the internal backlight in the Sony ACX424AKP driver to do it the canonical way: - Assign the panel->backlight during probe. - Let the panel framework handle the backlight. - Make the backlight .set_brightness() turn the backlight off completely if blank. - Fix some dev_err_probe() use cases along the way. Tested on the U8500 HREF520 reference design. Signed-off-by: NLinus Walleij <linus.walleij@linaro.org> Reviewed-by: NSam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210715092808.1100106-1-linus.walleij@linaro.org
-
由 Desmond Cheong Zhi Xi 提交于
Inside drm_is_current_master, using the outer drm_device.master_mutex to protect reads of drm_file.master makes the function prone to creating lock hierarchy inversions. Instead, we can use the drm_file.master_lookup_lock that sits at the bottom of the lock hierarchy. Reported-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDesmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210724111824.59266-2-desmondcheongzx@gmail.com
-
由 Simon Ser 提交于
Add links to the issue tracker and the IRC channel for the amdgpu driver. Signed-off-by: NSimon Ser <contact@emersion.fr> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Pan Xinhui <Xinhui.Pan@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Alex Deucher 提交于
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: NKrunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: NRodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: NCamille Cho <Camille.Cho@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715Reviewed-by: NRoman Li <Roman.Li@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
Properly restore those committed and non-committed user customized OD settings. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Evan Quan 提交于
The customized OD settings can be divided into two parts: those committed ones and non-committed ones. - For those changes which had been fed to SMU before S3/S4/Runpm suspend kicked, they are committed changes. They should be properly restored and fed to SMU on S3/S4/Runpm resume. - For those non-committed changes, they are restored only without feeding to SMU. Signed-off-by: NEvan Quan <evan.quan@amd.com> Reviewed-by: NLijo Lazar <lijo.lazar@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 4bba567c. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 4e7b93ca. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 7ed9876c. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 024d8811. Revert reason: The issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Huang 提交于
This reverts commit 430f8e6e. Revert reason: Issue has been resolved. Signed-off-by: NEric Huang <jinhuieric.huang@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Aric Cyr 提交于
This version brings along following fixed: - Guard DST_Y_PREFETCH register overflow in DCN21 - Add missing DCN21 IP parameter - Fix PSR command version - Add ETW logging for AUX failures - Add ETW log to dmub_psr_get_state - Fixed EdidUtility build errors - Fix missing reg offset for the dmcub test debug registers - Adding update authentication interface - Remove unused functions of opm state query support - Always wait for update lock status - Refactor riommu invalidation wa - Ensure dentist display clock update finished in DCN20 Reviewed-by: NHsieh Mike <Mike.Hsieh@amd.com> Acked-by: NSolomon Chiu <solomon.chiu@amd.com> Signed-off-by: NAric Cyr <aric.cyr@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Anthony Koo 提交于
Reviewed-by: NCyr Aric <aric.cyr@amd.com> Acked-by: NSolomon Chiu <solomon.chiu@amd.com> Signed-off-by: NAnthony Koo <Anthony.Koo@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Dale Zhao 提交于
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: NCyr Aric <aric.cyr@amd.com> Acked-by: NSolomon Chiu <solomon.chiu@amd.com> Signed-off-by: NDale Zhao <dale.zhao@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-
由 Eric Yang 提交于
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: NKazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: NSolomon Chiu <solomon.chiu@amd.com> Signed-off-by: NEric Yang <Eric.Yang2@amd.com> Tested-by: NDaniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
-