- 04 6月, 2009 3 次提交
-
-
由 Josh Boyer 提交于
This cleans up the makalu board port to use the ppc40x_simple platform support. Tested-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Stefan Roese 提交于
Now that the 4xx NAND driver is available again in arch/powerpc, let's enable it on Sequoia. This patch also disables the early debug messages (CONFIG_PPC_EARLY_DEBUG) in the Sequoia defconfig. Signed-off-by: NStefan Roese <sr@denx.de> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
The single board defconfig files were missed during the cleanup of CONFIG_PCI_LEGACY in the multi-board config files. This disables the option for the single board configs, as it isn't used by anything for these boards. Reported-by: NCheng Renquan <crquan@gmail.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
- 02 6月, 2009 7 次提交
-
-
由 Stephen Rothwell 提交于
It was __devinit, but it is also within a CONFIG_HOTPLUG guarded section of code, so the __devinit does nothing but cause the following warning: WARNING: vmlinux.o(.text+0x107a8): Section mismatch in reference from the function pcibios_finish_adding_to_bus() to the function .devinit.text:pcibios_claim_one_bus() The function pcibios_finish_adding_to_bus() references the function __devinit pcibios_claim_one_bus(). This is often because pcibios_finish_adding_to_bus lacks a __devinit annotation or the annotation of pcibios_claim_one_bus is wrong. It is also only (externally) used in arch/powerpc/kernel/of_platform.c which cannot be built as a module so don't export it. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
There's no need to wrap PPC_INST_NOP in a static inline. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
These macros were used in the original port, but since commit e4486fe3 (ftrace, use probe_kernel API to modify code) they are unused. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
Use ppc_function_entry() from code-patching.h. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Nathan Fontenot 提交于
This patch updates the output from /proc/ppc64/lparcfg to display the processor virtualization resource allocations for a shared processor partition. This information is already gathered via the h_get_ppp call, we just have to make sure that the ibm,partition-performance-parameters-level property is >= 1 to ensure that the information is valid. Signed-off-by: NNathan Fontenot <nfont@austin.ibm.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
RTAS event scan has to run across all cpus. Right now we use a kernel thread and set_cpus_allowed but in doing so we wake up the previous cpu unnecessarily. Some ftrace output shows this: previous cpu (2): [002] 7.022331: sched_switch: task swapper:0 [140] ==> rtasd:194 [120] [002] 7.022338: sched_switch: task rtasd:194 [120] ==> migration/2:9 [0] [002] 7.022344: sched_switch: task migration/2:9 [0] ==> swapper:0 [140] next cpu (3): [003] 7.022345: sched_switch: task swapper:0 [140] ==> rtasd:194 [120] [003] 7.022371: sched_switch: task rtasd:194 [120] ==> swapper:0 [140] We can use schedule_delayed_work_on and avoid the unnecessary wakeup. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
We can compile and boot with NR_CPUS=8192, so make this the max. 1024 was an arbitrary decision anyway. Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 27 5月, 2009 4 次提交
-
-
由 Benjamin Herrenschmidt 提交于
The implementation we just revived has issues, such as using a Kconfig-defined virtual address area in kernel space that nothing actually carves out (and thus will overlap whatever is there), or having some dependencies on being self contained in a single PTE page which adds unnecessary constraints on the kernel virtual address space. This fixes it by using more classic PTE accessors and automatically locating the area for consistent memory, carving an appropriate hole in the kernel virtual address space, leaving only the size of that area as a Kconfig option. It also brings some dma-mask related fixes from the ARM implementation which was almost identical initially but grew its own fixes. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
Make FIXADDR_TOP a compile time constant and cleanup a couple of definitions relative to the layout of the kernel address space on ppc32. We also print out that layout at boot time for debugging purposes. This is a pre-requisite for properly fixing non-coherent DMA allocactions. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
(pre-requisite to make the next patches more palatable) Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Benjamin Herrenschmidt 提交于
This reverts commit 33f00dce. While it was a good idea to try to use the mm/vmalloc.c allocator instead of our own (in fact, ours is itself a dup on an old variant of the vmalloc one), unfortunately, the approach is terminally busted since dma_alloc_coherent() can be called at interrupt time or in atomic contexts and there's little chances we'll make the code in mm/vmalloc.c cope with\ that :-( Until we can get the generic code to forbid that idiocy and fix all drivers abusing it, we pretty much have no choice but revert to our custom virtual space allocator. There's also a problem with SMP safety since freeing such mapping would require an IPI which cannot be done at interrupt time. However, right now, I don't think we support any platform that is both SMP and has non-coherent DMA (don't laugh, I know such things do exist !) so we can sort that out later. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 26 5月, 2009 1 次提交
-
-
由 Hideo Saito 提交于
The recent rework of the MMU PID handling for non-hash CPUs has a subtle bug in the !SMP "optimized" variant of the PID stealing function. It clears the PID in the mm context before it calls local_flush_tlb_mm(). However, the later will not flush anything if the PID in the context is clear... Signed-off-by: NHideo Saito <hsaito.ppc@gmail.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 22 5月, 2009 1 次提交
-
-
由 Michael Ellerman 提交于
Something in the HW or FW setup is busted and MSIs aren't working with IPR on Bimini, so until we figure out exaxtly what's up, we quirk them out Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
- 21 5月, 2009 24 次提交
-
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the device node. We should be calling pci_device_to_OF_node(). Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Tested-by: NStephen Rothwell <sfr@canb.auug.org.au> Acked-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Geert Uytterhoeven 提交于
If CONFIG_PPC_EMULATED_STATS is enabled, make available counters for the various classes of emulated instructions under /sys/kernel/debug/powerpc/emulated_instructions/ (assumed debugfs is mounted on /sys/kernel/debug). Optionally (controlled by /sys/kernel/debug/powerpc/emulated_instructions/do_warn), rate-limited warnings can be printed to the console when instructions are emulated. Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Vinay Sridhar 提交于
Hello All, Quite a while back Michael Ellerman had posted a patch to add support to xmon to print the contents of the console log pointed to by __log_buf. Here's the link to that patch - http://ozlabs.org/pipermail/linuxppc64-dev/2005-March/003657.html I've ported the patch in the above link to 2.6.30-rc5 and have tested it. Thanks & regards, Vinay Signed-off-by: Michael Ellerman <michael at ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Becky Bruce 提交于
Currently, the 32-bit code uses sg->length instead of sg->dma_lentgh to report sg_dma_len. However, since the default dma code for 32-bit (the dma_direct case) sets dma_length and length to the same thing, we should be able to use dma_length there as well. This gets rid of some 32-vs-64-bit ifdefs, and is needed by the swiotlb code which actually distinguishes between dma_length and length. Signed-off-by: NBecky Bruce <beckyb@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Jan Blunck 提交于
This patch removes an unnecessary double check if the dentry returned by lookup_create() is actually non-negative. Since lookup_create() itself returns an error in this case just remove the check. Signed-off-by: NJan Blunck <jblunck@suse.de> Signed-off-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Anton Blanchard 提交于
I have been looking at sources of OS jitter and notice that after a long NO_HZ idle period we wakeup too early: relative time (us) event timer irq exit 999946.405 timer irq entry 4.835 timer irq exit 21.685 timer irq entry 3.540 timer (tick_sched_timer) entry Here we slept for just under a second then took a timer interrupt that did nothing. 21.685 us later we wake up again and do the work. We set a rather low shift value of 16 for the decrementer clockevent, which I think is causing this issue. On this box we have a 207MHz decrementer and see: clockevent: decrementer mult[3501] shift[16] cpu[0] For calculations of large intervals this mult/shift combination could be off by a significant amount. I notice the sparc code has a loop that iterates to find a mult/shift combination that maximises the shift value while keeping mult under 32bit. With the patch below we get: clockevent: decrementer mult[35015c20] shift[32] cpu[15] And we no longer see the spurious wakeups. Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
The pcnet32 driver has had in its device id table for some time a match against the "broken" vendor ID. No need to fake out the vendor ID with an explicit fixup. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
* Removed building setup-irq on ppc32, we don't use it anymore * Remove duplicate prototype for setup_grackle() code that needs it gets it from <asm/grackle.h> * Removed gratuitous pci_io_size type differences between ppc32/ppc64 Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
There doesn't appear to be any specific reason that we need to setup the pseries specific notifier in generic arch pci code. Move it into pseries land. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the device node to just go get the pci_controller. We can call pci_bus_to_host() for this purpose. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the device node but call pci_bus_to_OF_node() for this purpose. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the device node but call pci_bus_to_OF_node() for this purpose. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We shouldn't directly access sysdata to get the pci_controller. Instead use pci_bus_to_host() for this purpose. In the future we might have sysdata be a device_node to match ppc64 and unify the code between ppc32 & ppc64. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
This adds the PowerPC 2.06 tlbie mnemonics and keeps backwards compatibilty for CPUs before 2.06. Only useful for bare metal systems. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Milton Miller 提交于
powerpc: Enable MMU feature sections for inline asm This adds the ability to do MMU feature sections for inline asm. Signed-off-by: NMilton Miller <miltonm@bga.com> Signed-off-by: NMichael Neuling <mikey@neuling.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Cleans up the VSX load/store instructions by moving them into ppc-opcode.h. Signed-off-by: NMichael Neuling <mikey@neuling.org> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Neuling 提交于
Make macros more braces happy. Signed-off-by: NMichael Neuling <mikey@neuling.org> Acked-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Kumar Gala 提交于
We believe if a toolchain supports PT_GNU_STACK that it sets the proper PHDR permissions. Therefor elf_read_implies_exec() should only be true if we don't see PT_GNU_STACK set. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-
由 Michael Ellerman 提交于
So select GENERIC_HARDIRQS_NO__DO_IRQ to disable it. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org>
-