- 03 1月, 2017 15 次提交
-
-
由 Venkat Venkatsubra 提交于
Tracks the receive side memory added to scokets and removed from sockets. Signed-off-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Shutdown code reaping loop takes care of emptying the CQ's before they being destroyed. And once tasklets are killed, the hanlders are not expected to run. But because of core tasklet code issues, tasklet handler could still run even after tasklet_kill, RDS IB shutdown code already reaps the CQs before freeing cq/qp resources so as such the handlers have nothing left to do post shutdown. On other hand any handler running after teardown and trying to access already freed qp/cq resources causes issues Patch fixes this race by makes sure that handlers returns without any action post teardown. Reviewed-by: NWengang <wen.gang.wang@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
When application sends an RDS RDMA composite message consist of RDMA transfer to be followed up by non RDMA payload, it expect to be notified *only* when the full message gets delivered. RDS RDMA notification doesn't behave this way though. Thanks to Venkat for debug and root casuing the issue where only first part of the message(RDMA) was successfully delivered but remainder payload delivery failed. In that case, application should not be notified with a false positive of message delivery success. Fix this case by making sure the user gets notified only after the full message delivery. Reviewed-by: NVenkat Venkatsubra <venkat.x.venkatsubra@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Based on available device vectors, allocate cqs accordingly to get better spread of completion vectors which helps performace great deal.. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Tracks the ib receive cache total, incoming and frag allocations. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Useful to know the active and passive end points in a RDS IB connection. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
In absence of extension headers, message log will keep flooding the console. As such even without use_once we can clean up the MRs so its not really an error case message so make it debug message Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
MR invalidation in RDS is done in background thread and not in data path like registration. So break the dependency between them which helps to remove the performance bottleneck. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
The first message to a remote node should prompt a new connection even if it is RDMA operation. For RDMA operation the MR mapping can fail because connections is not yet up. Since the connection establishment is asynchronous, we make sure the map failure because of unavailable connection reach to the user by appropriate error code. Before returning to the user, lets trigger the connection so that its ready for the next retry. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Qing Huang 提交于
This prevents RDS from handling incoming rdma packets before RDS completes initializing its recv/send components. Signed-off-by: NQing Huang <qing.huang@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Fixes warning: Using plain integer as NULL pointer Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Transport retry is not much useful since it indicate packet loss in fabric so its better to failover fast rather than longer retry. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Also use pr_* for it. Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
Fixes below warnings: warning: symbol 'rds_send_probe' was not declared. Should it be static? warning: symbol 'rds_send_ping' was not declared. Should it be static? warning: symbol 'rds_tcp_accept_one_path' was not declared. Should it be static? warning: symbol 'rds_walk_conn_path_info' was not declared. Should it be static? Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
由 Santosh Shilimkar 提交于
It's useful to know the IP address when RDS fails to bind a connection. Thus, adding it to the error message. Orabug: 21894138 Reviewed-by: NWei Lin Guay <wei.lin.guay@oracle.com> Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com>
-
- 21 12月, 2016 1 次提交
-
-
由 Geliang Tang 提交于
To make the code clearer, use rb_entry() instead of container_of() to deal with rbtree. Signed-off-by: NGeliang Tang <geliangtang@gmail.com> Reviewed-by: NLeon Romanovsky <leonro@mellanox.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 12月, 2016 1 次提交
-
-
由 Steve Wise 提交于
Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 03 12月, 2016 1 次提交
-
-
由 Sowmini Varadhan 提交于
If some error is encountered in rds_tcp_init_net, make sure to unregister_netdevice_notifier(), else we could trigger a panic later on, when the modprobe from a netns fails. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 11月, 2016 4 次提交
-
-
由 Alexey Dobriyan 提交于
Make struct pernet_operations::id unsigned. There are 2 reasons to do so: 1) This field is really an index into an zero based array and thus is unsigned entity. Using negative value is out-of-bound access by definition. 2) On x86_64 unsigned 32-bit data which are mixed with pointers via array indexing or offsets added or subtracted to pointers are preffered to signed 32-bit data. "int" being used as an array index needs to be sign-extended to 64-bit before being used. void f(long *p, int i) { g(p[i]); } roughly translates to movsx rsi, esi mov rdi, [rsi+...] call g MOVSX is 3 byte instruction which isn't necessary if the variable is unsigned because x86_64 is zero extending by default. Now, there is net_generic() function which, you guessed it right, uses "int" as an array index: static inline void *net_generic(const struct net *net, int id) { ... ptr = ng->ptr[id - 1]; ... } And this function is used a lot, so those sign extensions add up. Patch snipes ~1730 bytes on allyesconfig kernel (without all junk messing with code generation): add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) Unfortunately some functions actually grow bigger. This is a semmingly random artefact of code generation with register allocator being used differently. gcc decides that some variable needs to live in new r8+ registers and every access now requires REX prefix. Or it is shifted into r12, so [r12+0] addressing mode has to be used which is longer than [r8] However, overall balance is in negative direction: add/remove: 0/0 grow/shrink: 70/598 up/down: 396/-2126 (-1730) function old new delta nfsd4_lock 3886 3959 +73 tipc_link_build_proto_msg 1096 1140 +44 mac80211_hwsim_new_radio 2776 2808 +32 tipc_mon_rcv 1032 1058 +26 svcauth_gss_legacy_init 1413 1429 +16 tipc_bcbase_select_primary 379 392 +13 nfsd4_exchange_id 1247 1260 +13 nfsd4_setclientid_confirm 782 793 +11 ... put_client_renew_locked 494 480 -14 ip_set_sockfn_get 730 716 -14 geneve_sock_add 829 813 -16 nfsd4_sequence_done 721 703 -18 nlmclnt_lookup_host 708 686 -22 nfsd4_lockt 1085 1063 -22 nfs_get_client 1077 1050 -27 tcf_bpf_init 1106 1076 -30 nfsd4_encode_fattr 5997 5930 -67 Total: Before=154856051, After=154854321, chg -0.00% Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
When 2 RDS peers initiate an RDS-TCP connection simultaneously, there is a potential for "duelling syns" on either/both sides. See commit 241b2719 ("RDS-TCP: Reset tcp callbacks if re-using an outgoing socket in rds_tcp_accept_one()") for a description of this condition, and the arbitration logic which ensures that the numerically large IP address in the TCP connection is bound to the RDS_TCP_PORT ("canonical ordering"). The rds_connection should not be marked as RDS_CONN_UP until the arbitration logic has converged for the following reason. The sender may start transmitting RDS datagrams as soon as RDS_CONN_UP is set, and since the sender removes all datagrams from the rds_connection's cp_retrans queue based on TCP acks. If the TCP ack was sent from a tcp socket that got reset as part of duel aribitration (but before data was delivered to the receivers RDS socket layer), the sender may end up prematurely freeing the datagram, and the datagram is no longer reliably deliverable. This patch remedies that condition by making sure that, upon receipt of 3WH completion state change notification of TCP_ESTABLISHED in rds_tcp_state_change, we mark the rds_connection as RDS_CONN_UP if, and only if, the IP addresses and ports for the connection are canonically ordered. In all other cases, rds_tcp_state_change will force an rds_conn_path_drop(), and rds_queue_reconnect() on both peers will restart the connection to ensure canonical ordering. A side-effect of enforcing this condition in rds_tcp_state_change() is that rds_tcp_accept_one_path() can now be refactored for simplicity. It is also no longer possible to encounter an RDS_CONN_UP connection in the arbitration logic in rds_tcp_accept_one(). Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The RDS transport has to be able to distinguish between two types of failure events: (a) when the transport fails (e.g., TCP connection reset) but the RDS socket/connection layer on both sides stays the same (b) when the peer's RDS layer itself resets (e.g., due to module reload or machine reboot at the peer) In case (a) both sides must reconnect and continue the RDS messaging without any message loss or disruption to the message sequence numbers, and this is achieved by rds_send_path_reset(). In case (b) we should reset all rds_connection state to the new incarnation of the peer. Examples of state that needs to be reset are next expected rx sequence number from, or messages to be retransmitted to, the new incarnation of the peer. To achieve this, the RDS handshake probe added as part of commit 5916e2c1 ("RDS: TCP: Enable multipath RDS for TCP") is enhanced so that sender and receiver of the RDS ping-probe will add a generation number as part of the RDS_EXTHDR_GEN_NUM extension header. Each peer stores local and remote generation numbers as part of each rds_connection. Changes in generation number will be detected via incoming handshake probe ping request or response and will allow the receiver to reset rds_connection state. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
As noted in rds_recv_incoming() sequence numbers on data packets can decreas for the failover case, and the Rx path is equipped to recover from this, if the RDS_FLAG_RETRANSMITTED is set on the rds header of an incoming message with a suspect sequence number. The RDS_FLAG_RETRANSMITTED is predicated on the RDS_FLAG_RETRANSMITTED flag in the rds_message, so make sure the flag is set on messages queued for retransmission. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 11月, 2016 2 次提交
-
-
由 Sowmini Varadhan 提交于
The for() loop in rds_tcp_accept_one() assumes that the 0'th rds_tcp_conn_path is UP and starts multipath accepts at index 1. But this assumption may not always be true: if the 0'th path has failed (ERROR or DOWN state) an incoming connection request should be used to resurrect this path. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The socket argument passed to rds_tcp_tc_info() is a PF_RDS socket, so it is incorrect to report the address port info based on rds_getname() as part of TCP state report. Invoke inet_getname() for the t_sock associated with the rds_tcp_connection instead. Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 10月, 2016 1 次提交
-
-
由 shamir rabinovitch 提交于
rds use Kconfig option called "RDS_DEBUG" to enable rds debug messages. This option cause the rds Makefile to add -DDEBUG to the rds gcc command line. When CONFIG_DYNAMIC_DEBUG is enabled, the "DEBUG" macro is used by include/linux/dynamic_debug.h to decide if dynamic debug prints should be sent by default to the kernel log. rds should not enable this macro for production builds. rds dynamic debug work as expected follow this fix. Signed-off-by: NShamir Rabinovitch <shamir.rabinovitch@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Reviewed-by: NWengang Wang <wen.gang.wang@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 10月, 2016 2 次提交
-
-
由 Joe Perches 提交于
rds_conn_path_error already prefixes "RDS:" to the output. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
This macro's last use was removed in commit d769ef81 ("RDS: Update rds_conn_shutdown to work with rds_conn_path") so make the macro and the __rds_conn_error function definition and declaration disappear. Signed-off-by: NJoe Perches <joe@perches.com> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 24 9月, 2016 1 次提交
-
-
由 Christoph Hellwig 提交于
Instead of exposing ib_get_dma_mr to ULPs and letting them use it more or less unchecked, this moves the capability of creating a global rkey into the RDMA core, where it can be easily audited. It also prints a warning everytime this feature is used as well. Signed-off-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NSagi Grimberg <sagi@grimberg.me> Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: NSteve Wise <swise@opengridcomputing.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 09 8月, 2016 1 次提交
-
-
由 Nicolas Iooss 提交于
This is helpful to detect at compile-time errors related to format strings. Signed-off-by: NNicolas Iooss <nicolas.iooss_linux@m4x.org> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 7月, 2016 3 次提交
-
-
由 Sowmini Varadhan 提交于
Use RDS probe-ping to compute how many paths may be used with the peer, and to synchronously start the multiple paths. If mprds is supported, hash outgoing traffic to one of multiple paths in rds_sendmsg() when multipath RDS is supported by the transport. CC: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
Some code duplication in rds_tcp_reset_callbacks() can be avoided by having the function call rds_tcp_restore_callbacks() and rds_tcp_set_callbacks(). Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
As the existing comments in rds_tcp_listen_data_ready() indicate, it is possible under some race-windows to get to this function with the accept() socket. If that happens, we could run into a sequence whereby thread 1 thread 2 rds_tcp_accept_one() thread sets up new_sock via ->accept(). The sk_user_data is now sock_def_readable data comes in for new_sock, ->sk_data_ready is called, and we land in rds_tcp_listen_data_ready rds_tcp_set_callbacks() takes the sk_callback_lock and sets up sk_user_data to be the cp read_lock sk_callback_lock ready = cp unlock sk_callback_lock page fault on ready In the above sequence, we end up with a panic on a bad page reference when trying to execute (*ready)(). Instead we need to call sock_def_readable() safely, which is what this patch achieves. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 7月, 2016 1 次提交
-
-
由 Vegard Nossum 提交于
If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa153 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: stable@vger.kernel.org Cc: Sowmini Varadhan <sowmini.varadhan@oracle.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com> Acked-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 7月, 2016 7 次提交
-
-
由 Sowmini Varadhan 提交于
RDS ping messages are sent with a non-zero src port to a zero dst port, so that the rds pong messages can be sent back to the originators src port. However if a confused/malicious sender sends a ping with a 0 src port, we'd have an infinite ping-pong loop. To avoid this, the receiver should ignore ping messages with a 0 src port. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
When reconnecting, the peer with the smaller IP address will initiate the reconnect, to avoid needless duelling SYN issues. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
This patch adds ->conn_path_connect callbacks in the rds_transport that are used to set up a single connection path. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The ->sk_user_data contains a pointer to the rds_conn_path for the socket. Use this consistently in the rds_tcp_data_ready callbacks to get the rds_conn_path for rds_recv_incoming. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The socket callbacks should all operate on a struct rds_conn_path, in preparation for a MP capable RDS-TCP. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
A single rds_connection may have multiple rds_conn_paths that have to be carefully and correctly destroyed, for both rmmod and netns-delete cases. For both cases, we extract a single rds_tcp_connection for each conn into a temporary list, and then invoke rds_conn_destroy() which iteratively dismantles every path in the rds_connection. For the netns deletion case, we additionally have to make sure that we do not leave a socket in TIME_WAIT state, as this will hold up the netns deletion. Thus we call rds_tcp_conn_paths_destroy() to reset state quickly. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sowmini Varadhan 提交于
The struct rds_tcp_connection is the transport-specific private data structure that tracks TCP information per rds_conn_path. Modify this structure to have a back-pointer to the rds_conn_path for which it is the ->cp_transport_data. Acked-by: NSantosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: NSowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-