- 23 9月, 2016 3 次提交
-
-
由 Oren Givon 提交于
Add two new PCI IDs for the 9560 series. Signed-off-by: NOren Givon <oren.givon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Move the init_dbg check to earlier in the function to simplify the code. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
This is never really used anymore. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 19 9月, 2016 25 次提交
-
-
由 Johannes Berg 提交于
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
There's no need to declare a list and then init it manually, just use the LIST_HEAD() macro. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Currently it is logged as UNKNOWN. Also, 0x6c seems to be the permanent ID for this command, remove incorrect comment and uncomment the command from the commands list. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Ido Yariv 提交于
In order to access cached/paged memory, there are a couple of firmware commands (one for UMAC and one for LMAC) that let the host access memory and registers indirectly. Since this is done by the firmware on behalf of the host, even if memory is paged out or cached, the host will retrieve the memory as the firmware sees it (paged out memory will get paged in). Export this mechanism via a debugfs entry for both read and write access. WARNING: This mechanism has no protections at all. Invalid addresses may crash or hang the firmware. Writing to arbitrary memory also comes with no guarantees. Signed-off-by: NIdo Yariv <idox.yariv@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
There's no need for the common MAC context function to have an if on AP mode, the values can be overridden in the AP-specific function later. Clean that up by adding the full command as a new parameter to the AP-specific function, and doing it there. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Oren Givon 提交于
Add a new PCI ID for the 8265 series. Signed-off-by: NOren Givon <oren.givon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Roee Zamir 提交于
New function, reveals the diff between gp2 and host time. Signed-off-by: NRoee Zamir <roee.zamir@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sharon Dvir 提交于
Change PCIE and trans resource allocations to managed resources. Signed-off-by: NSharon Dvir <sharon.dvir@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
AP queue is properly released, but P2P queue isn't. Fixes: commit 4c965139 ("iwlwifi: mvm: support p2p device frames tx on dqa queue #2") Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Emmanuel Grumbach 提交于
This can save a few bytes Signed-off-by: NEmmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
When we get an unexpected Block Ack Request frame, the BAID from the hardware will be invalid, and we'll pass it to mac80211 for further handling (sending a delBA action frame.) Add a comment explaining that, in case anyone looks in the future. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Due to firmware design considerations, move to wide ID for all commands. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
There's no point in making this an out-of-line function since it just calls a single other function with a few changed parameters. Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Log group as well. Remove 0x prefix to match TX logging. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Arik Nemtsov 提交于
This will be used by more than MVM, so move it to iwlwifi While at it, rename WRD_METHOD to the more appropriate WRDD_METHOD and add some documentation. Signed-off-by: NArik Nemtsov <arikx.nemtsov@intel.com> Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
For automatic testing packet injection can be useful. Support injection through debugfs. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Avrahams Stern 提交于
Implement support for RRM by adding an option to configure the scan dwell time and reporting scan start time and BSS detection time, and Advertise support for these features. Signed-off-by: NDavid Spinadel <david.spinadel@intel.com> Signed-off-by: NAvraham Stern <avraham.stern@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
On default queue we will not receive frame release notification, but the BAR itself. Upon receiving the BAR driver should look at the NSSN and adjust window accordingly. Fixes: b915c101 ("iwlwifi: mvm: add reorder buffer per queue") Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
There was recently a Full AP mode feature added where hostap adds the station at auth stage, and not assoc. However, when running with legacy hostapd, we get the auth response before station was added, and tx_skb_non_sta fails to allocate a queue, resulting in a complete failure of association. Take care of this situation as well. Add a warning when no valid queue is returned at all and make mvm drop the packet instead of passing it on. Refactor the function a bit while at it. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Haim Dreyfuss 提交于
In 9000 family products we added an option to let the OEM fuse the mac address via registers. If these registers are zeroed we use the OTP address instead. Make sure that the address provided by the OEM is valid and, if not, fall back to the OTP address as well. Fixes: commit 17c867bf ("iwlwifi: add support for getting HW address from CSR") Signed-off-by: NHaim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Aviya Erenfeld 提交于
enable MU-MIMO air sniffer if it's supported by the NIC Signed-off-by: NAviya Erenfeld <aviya.erenfeld@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Johannes Berg 提交于
When comparing command IDs, the group should be taken into account so the same command/notification from a different group doesn't trigger anything unexpected. Fix this by comparing to the wide ID. Fixes: commit 1738d60b ("iwlwifi: mvm: handle RX MPDUs separately") Signed-off-by: NJohannes Berg <johannes.berg@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
Use skb_queue_empty() and not skb_peek_tail() to check for empty list. Avoid a redundant check as well - loop will take care of it. Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Sara Sharon 提交于
commit 3cd1980b ("iwlwifi: pcie: introduce new tfd and tb formats") Signed-off-by: NSara Sharon <sara.sharon@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
由 Liad Kaufman 提交于
Variable "ac" defined twice. Fix that. Fixes: commit 93f436e2 ("iwlwifi: mvm: set sta_id in SCD_QUEUE_CONFIG cmd") Signed-off-by: NLiad Kaufman <liad.kaufman@intel.com> Signed-off-by: NLuca Coelho <luciano.coelho@intel.com>
-
- 17 9月, 2016 9 次提交
-
-
由 Colin Ian King 提交于
If adapter is null the error exit path in mwifiex_shutdown_sw is to down the semaphore sem and print some debug via mwifiex_dbg. However, passing a NULL adapter to mwifiex_dbg causes a null pointer deference when accessing adapter->dev. This fix checks for a null adapter at the start of the function and to exit without the need to up the semaphore and we also skip the debug to avoid the null pointer dereference. Signed-off-by: NColin Ian King <colin.king@canonical.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Bob Copeland 提交于
smatch reports: sta_cmdresp.c:1053 mwifiex_create_custom_regdomain() warn: possible memory leak of 'regd' Indeed, mwifiex_create_custom_regdomain() returns NULL in the case that channel is missing in the TLV without freeing regd. Moreover, some other error paths in this function return ERR_PTR values which are assigned without checking to the regd field in the mwifiex_adapter struct. The latter is only null-checked where used. Fix by freeing regd in the error path, and only update priv->adapter->regd if the returned pointer is valid. Cc: Amitkumar Karwar <akarwar@marvell.com> Cc: Nishant Sarmukadam <nishants@marvell.com> Signed-off-by: NBob Copeland <me@bobcopeland.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Jes Sorensen 提交于
This powers down the 8192e correctly, or at least to the point where the firmware will load again, when reloading the driver module. Signed-off-by: NJes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: NKalle Valo <kvalo@codeaurora.org>
-
由 Julia Lawall 提交于
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 21623 1316 40 22979 59c3 drivers/net/ethernet/synopsys/dwc_eth_qos.o and after the change it is: text data bss dec hex filename 22199 724 40 22963 59b3 drivers/net/ethernet/synopsys/dwc_eth_qos.o Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Julia Lawall 提交于
Check for net_device_ops structures that are only stored in the netdev_ops field of a net_device structure. This field is declared const, so net_device_ops structures that have this property can be declared as const also. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct net_device_ops i@p = { ... }; @ok@ identifier r.i; struct net_device e; position p; @@ e.netdev_ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct net_device_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct net_device_ops i = { ... }; // </smpl> The result of size on this file before the change is: text data bss dec hex filename 7995 848 8 8851 2293 drivers/net/ethernet/hisilicon/hip04_eth.o and after the change it is: text data bss dec hex filename 8571 256 8 8835 2283 drivers/net/ethernet/hisilicon/hip04_eth.o Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Ahern 提交于
No longer used after d66f6c0a ("net: ipv4: Remove l3mdev_get_saddr") Signed-off-by: NDavid Ahern <dsa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
Instead of reallocating and mapping pages for RX data-path, recycle already used pages in a per ring cache. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - order0 no cache * 4,786,899 - order0 with cache 1% gain Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - order0 no cache * 4,127,852 - order0 with cache 3.7% gain Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - order0 no cache * 3,931,708 - order0 with cache 5.4% gain Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
Manage the allocation and deallocation of mapped RX pages only through dedicated API functions. Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Tariq Toukan 提交于
To improve the memory consumption scheme, we omit the flow that demands and splits high-order pages in Striding RQ, and stay with a single Striding RQ flow that uses order-0 pages. Moving to fragmented memory allows the use of larger MPWQEs, which reduces the number of UMR posts and filler CQEs. Moving to a single flow allows several optimizations that improve performance, especially in production servers where we would anyway fallback to order-0 allocations: - inline functions that were called via function pointers. - improve the UMR post process. This patch alone is expected to give a slight performance reduction. However, the new memory scheme gives the possibility to use a page-cache of a fair size, that doesn't inflate the memory footprint, which will dramatically fix the reduction and even give a performance gain. Performance tests: The following results were measured on a freshly booted system, giving optimal baseline performance, as high-order pages are yet to be fragmented and depleted. We ran pktgen single-stream benchmarks, with iptables-raw-drop: Single stride, 64 bytes: * 4,739,057 - baseline * 4,749,550 - this patch no reduction Larger packets, no page cross, 1024 bytes: * 3,982,361 - baseline * 3,845,682 - this patch 3.5% reduction Larger packets, every 3rd packet crosses a page, 1500 bytes: * 3,731,189 - baseline * 3,579,414 - this patch 4% reduction Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Fixes: bc77b240 ("net/mlx5e: Add fragmented memory support for RX multi packet WQE") Signed-off-by: NTariq Toukan <tariqt@mellanox.com> Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2016 3 次提交
-
-
由 John Crispin 提交于
This patch contains initial support for the QCA8337 switch. It will detect a QCA8337 switch, if present and declared in the DT. Each port will be represented through a standalone net_device interface, as for other DSA switches. CPU can communicate with any of the ports by setting an IP@ on ethN interface. Most of the extra callbacks of the DSA subsystem are already supported, such as bridge offloading, stp, fdb. Signed-off-by: NJohn Crispin <john@phrozen.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
Remove .owner field if calls are used which set it automatically. Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Wei Yongjun 提交于
The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: NWei Yongjun <weiyongjun1@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-