The issue we have is that the crc worker might fall behind. We've
tried to handle this by tracking both the earliest frame for which it
still needs to compute a crc, and the last one. Plus when the
crtc_state changes, we have a new work item, which are all run in
order due to the ordered workqueue we allocate for each vkms crtc.

Trouble is there's been a few small issues in the current code:
- we need to capture frame_end in the vblank hrtimer, not in the
  worker. The worker might run much later, and then we generate a lot
  of crc for which there's already a different worker queued up.
- frame number might be 0, so create a new crc_pending boolean to
  track this without confusion.
- we need to atomically grab frame_start/end and clear it, so do that
  all in one go. This is not going to create a new race, because if we
  race with the hrtimer then our work will be re-run.
- only race that can happen is the following:
  1. worker starts
  2. hrtimer runs and updates frame_end
  3. worker grabs frame_start/end, already reading the new frame_end,
  and clears crc_pending
  4. hrtimer calls queue_work()
  5. worker completes
  6. worker gets  re-run, crc_pending is false
  Explain this case a bit better by rewording the comment.

v2: Demote warning level output to debug when we fail to requeue, this
is expected under high load when the crc worker can't quite keep up.

Cc: Shayenne Moura <shayenneluzmoura@gmail.com>
Cc: Rodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Tested-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Signed-off-by: NRodrigo Siqueira <rodrigosiqueiramelo@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606222751.32567-2-daniel.vetter@ffwll.ch

We gracefully handle the caller specifying a zero range, so don't force
them to special case that condition if it naturally falls out of their
setup. What we don't check is if the end < start, so keep that as an
assert for an illegal call.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: NDaniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190626094330.3556-1-chris@chris-wilson.co.uk

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: virtualization@lists.linux-foundation.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NGerd Hoffmann <kraxel@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-12-emil.l.velikov@gmail.com

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-11-emil.l.velikov@gmail.com

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Note: the outstanding DRM_AUTH instance is:
 - (badly coped) legacy DRI1 ioctl, which is a noop

Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NTomi Valkeinen <tomi.valkeinen@ti.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-9-emil.l.velikov@gmail.com

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Note: the outstanding DRM_AUTH instance is:
 - legacy DRI1 ioctl, which is already neutered

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NBen Skeggs <bskeggs@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-8-emil.l.velikov@gmail.com

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: freedreno@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-7-emil.l.velikov@gmail.com

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Cc: Qiang Yu <yuq825@gmail.com>
Cc: lima@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NQiang Yu <yuq825@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-6-emil.l.velikov@gmail.com

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Cc: Inki Dae <inki.dae@samsung.com>
Cc: Joonyoung Shim <jy0922.shim@samsung.com>
Cc: Seung-Woo Kim <sw0312.kim@samsung.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Cc: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NInki Dae <inki.dae@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-4-emil.l.velikov@gmail.com

The authentication can be circumvented, by design, by using the render
node.

From the driver POV there is no distinction between primary and render
nodes, thus we can drop the token.

Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NChristian Gmeiner <christian.gmeiner@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190527081741.14235-3-emil.l.velikov@gmail.com

Currently vmw_execbuf_ioctl() open-codes the permission checking, size
extending and copying that is already done in core drm.

Kill all the duplication, adding a few comments for clarity.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Tested-by: NThomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522164119.24139-3-emil.l.velikov@gmail.com

According to the docs - prevents firstopen/lastclose races. Yet never
used in practise.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522164119.24139-2-emil.l.velikov@gmail.com

Core DRM is safe when the callback is NULL.

Cc: VMware Graphics <linux-graphics-maintainer@vmware.com>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NThomas Hellstrom <thellstrom@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522164119.24139-1-emil.l.velikov@gmail.com

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: nouveau@lists.freedesktop.org
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522150219.13913-2-emil.l.velikov@gmail.com

DRM_UNLOCKED doesn't do anything for non-legacy drivers. Remove it.

Cc: intel-gfx@lists.freedesktop.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522154702.16269-3-emil.l.velikov@gmail.com

DRM_UNLOCKED doesn't do anything for non-legacy drivers. Remove it.

Cc: Thierry Reding <treding@nvidia.com>
Cc: linux-tegra@vger.kernel.org
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NThierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190522154702.16269-1-emil.l.velikov@gmail.com

The Boe Himax8279d is a 8.0" panel with a 1200x1920 resolution and
connected to DSI using four lanes.

V8:
- Modify communication address

V7:
- Add the information of the reviewer

V6:
- Add the information of the reviewer

V5:
- Added changelog

V4:
- None

V3:
- None

V2:
- Add compatible device "boe,himax8279d10p" (Sam)
- Add the necessary property descriptions (Sam)
Signed-off-by: NJerry Han <jerry.han.hq@gmail.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NDerek Basehore <dbasehore@chromium.org>
Cc: Jitao Shi <jitao.shi@mediatek.com>
Cc: Rock wang <rock_wang@himax.com.cn>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190425031842.17202-1-jerry.han.hq@gmail.com

The ETM0700G0DH6 is currently documented as using edt,etm070080dh6
compatible string, however the Linux kernel driver as well as a
couple of DTs use edt,etm0700g0dh6 compatible string. Add it into
the documentation.
Signed-off-by: NMarek Vasut <marex@denx.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Jan Tuerk <jan.tuerk@emtrion.com>
Cc: Thierry Reding <treding@nvidia.com>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190503154749.5630-1-marex@denx.de

Allow to specify regulators for vcc and iovcc. According to the data
sheet the panel wants vcc (2.8V) and iovcc (1.8V) and there's no startup
dependency between the two.
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/f78611fb26329e50ec1533810fbb76562f2f4e48.1561542477.git.agx@sigxcpu.org

Document the vcc-supply and iovcc-supply properties of the Rocktech
jh057n00900 panel.
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ec5ee11786036dc8826a3f8555cbb1dce4dbca25.1561542477.git.agx@sigxcpu.org

0xBF isn't in any ST7703 data sheet so mark it as unknown. This avoids
confusion on whether there is a missing command in that
dsi_generic_write_seq() call.
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/7f50fa6de2ae029111f158f8ea7fd69a0903eb97.1561542477.git.agx@sigxcpu.org

Add a mail alias as reviewer for the rocktech jh057n00900 panel driver.
Signed-off-by: NGuido Günther <agx@sigxcpu.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a392758c914d436ec5e449980f619bc906c3054a.1561542477.git.agx@sigxcpu.org

This patch adds Raydium RM67191 TFT LCD panel driver (MIPI-DSI
protocol).
Signed-off-by: NRobert Chiras <robert.chiras@nxp.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1561550907-9733-3-git-send-email-robert.chiras@nxp.com

Add dt-bindings documentation for Raydium RM67191 DSI panel.
Signed-off-by: NRobert Chiras <robert.chiras@nxp.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Reviewed-by: NFabio Estevam <festevam@gmail.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1561550907-9733-2-git-send-email-robert.chiras@nxp.com

The Sharp LS020B1DD01D is a simple 2.0" 240x160 16-bit TFT panel.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Tested-by: NArtur Rojek <contact@artur-rojek.eu>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603153120.23947-3-paul@crapouillou.net

Add the DRM_BUS_FLAG_SHARP_SIGNALS to the drm_bus_flags enum.

This flags can be used when the display must be driven with the
Sharp-specific signals SPL, CLS, REV, PS.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603153120.23947-2-paul@crapouillou.net

The LS020B1DD01D is a 2.0" 240x160 16-bit TFT LCD panel.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Reviewed-by: NRob Herring <robh@kernel.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603153120.23947-1-paul@crapouillou.net

Add support for display panels built around the Novatek NT39016 display
controller, as found on e.g. the King Display KD035G6-54NT 24-bit
320x240 3.5" LCD panel which equips the GCW Zero open-source handheld
gaming console.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Signed-off-by: NMaarten ter Huurne <maarten@treewalker.org>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152555.23527-2-paul@crapouillou.net

The KD035G6-54NT is a 3.5" 320x240 24-bit TFT LCD panel.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603152555.23527-1-paul@crapouillou.net

Add myself as co-maintainer of DRM Bridge Drivers then add Jonas Karlman
and Jernej Škrabec as Reviewers of DRM Bridge Drivers.

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Andrzej Hajda <a.hajda@samsung.com>
Cc: Jernej Škrabec <jernej.skrabec@siol.net>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: NNeil Armstrong <narmstrong@baylibre.com>
Reviewed-by: NJernej Skrabec <jernej.skrabec@siol.net>
Reviewed-by: NJonas Karlman <jonas@kwiboo.se>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NAndrzej Hajda <a.hajda@samsung.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190624090851.17859-1-narmstrong@baylibre.com

The change adds support for the Ortustech COM37H3M05DTC/99DTC 3.7" TFT LCD panel.

Tested on Letux3704.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/43b47034b618cff26cea0484591c6deafb7f0685.1559905870.git.hns@goldelico.com

The change adds support for the Sharp LQ070Y3DG3B 7.0" TFT LCD panel.

Tested on Letux7004.
Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d16aaa1ac93e4f15c13cd7d621de95836257676a.1559905870.git.hns@goldelico.com

Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ee90ed56d2c294ce8ac3b44bf2229c5ab9f85e91.1559905870.git.hns@goldelico.com

Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/3e0720fbddfd7b35ad8551440544411485d8ad9f.1559905870.git.hns@goldelico.com

Signed-off-by: NH. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/a650cb8df1bdf58ec3c8a182532692db16b77f70.1559905870.git.hns@goldelico.com

The GiantPlus GPM940B0 is a simple 3.0" 320x240 24-bit TFT panel.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Tested-by: NArtur Rojek <contact@artur-rojek.eu>
Reviewed-by: NSam Ravnborg <sam@ravnborg.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605222247.25657-3-paul@crapouillou.net

This patch adds MEDIA_BUS_FMT_RGB888_3X8, used for the GiantPlus
GPM940B0 24-bit TFT panel, where the RGB components are transferred
sequentially on a 8-bit bus.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Acked-by: NMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: NSakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605222247.25657-2-paul@crapouillou.net

The GPM940B0 is a 3.0" 320x240 24-bit TFT LCD panel.
Signed-off-by: NPaul Cercueil <paul@crapouillou.net>
Reviewed-by: NRob Herring <robh@kernel.org>
Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605222247.25657-1-paul@crapouillou.net

Only user was the prime import, and drm_prime.c takes care of that
now.
Reviewed-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Acked-by: NRob Clark <robdclark@gmail.com>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Sean Paul <sean@poorly.run>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-46-daniel.vetter@ffwll.ch

Only user was the prime import, and drm_prime.c takes care of that
now.
Reviewed-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NEmil Velikov <emil.velikov@collabora.com>
Reviewed-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NDaniel Vetter <daniel.vetter@intel.com>
Cc: Lucas Stach <l.stach@pengutronix.de>
Cc: Russell King <linux+etnaviv@armlinux.org.uk>
Cc: Christian Gmeiner <christian.gmeiner@gmail.com>
Cc: etnaviv@lists.freedesktop.org
Link: https://patchwork.freedesktop.org/patch/msgid/20190614203615.12639-43-daniel.vetter@ffwll.ch