There is no need to package buf and mtt into hns_roce_cq_buf, which will
make code more complex, just delete this struct and move buf and mtt into
hns_roce_cq. Furthermore, we add size member for hns_roce_buf to avoid
repeatly calculating where needed it.

Link: https://lore.kernel.org/r/1574044493-46984-3-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Some interfaces defined with unnecessary input parameters, such as "nent"
and "vector". This patch redefined these interfaces to make the code more
readable and simple.

Link: https://lore.kernel.org/r/1574044493-46984-2-git-send-email-liweihang@hisilicon.comSigned-off-by: NYixian Liu <liuyixian@huawei.com>
Signed-off-by: NWeihang Li <liweihang@hisilicon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Query the device attributes for RDMA operations, including maximum
transfer size and maximum number of SGEs per RDMA WR, and report them
back to the userspace library.

Link: https://lore.kernel.org/r/20191121141509.59297-4-galpress@amazon.comSigned-off-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Enable remote read access for memory regions in order to support RDMA
operations.

Link: https://lore.kernel.org/r/20191121141509.59297-3-galpress@amazon.comSigned-off-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There's no reason to separate the network attributes from all other
device attributes. Embed the fields inside the device attributes and
query them all in one function.

Link: https://lore.kernel.org/r/20191121141509.59297-2-galpress@amazon.comReviewed-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NYossi Leybovich <sleybo@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The variable ret is being initialized with a value that is never
read and it is being updated later with a new value. The
initialization is redundant and can be removed.

Link: https://lore.kernel.org/r/20191122154814.87257-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Acked-by: NDennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

From sparse:

drivers/infiniband/hw/bnxt_re/main.c:1274:18: warning: cast from restricted __le16
drivers/infiniband/hw/bnxt_re/main.c:1275:18: warning: cast from restricted __le16
drivers/infiniband/hw/bnxt_re/main.c:1276:18: warning: cast from restricted __le16
drivers/infiniband/hw/bnxt_re/main.c:1277:21: warning: restricted __le16 degrades to integer

Fixes: 2b827ea1 ("RDMA/bnxt_re: Query HWRM Interface version from FW")
Link: https://lore.kernel.org/r/1574317343-23300-4-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Due to recent advances in the firmware for Broadcom's gen p5 series of
adaptors the driver code to report hardware counters has been broken
w.r.t. roce devices.

The new firmware command expects dma length to be specified during stat
dma buffer allocation.

Fixes: 2792b5b9 ("bnxt_en: Update firmware interface spec. to 1.10.0.89.")
Link: https://lore.kernel.org/r/1574317343-23300-3-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

In the first version of Gen P5 ASIC, chip-id was always set to 0x1750 for
all adaptor port configurations. This has been fixed in the new chip rev.

Due to this missing fix users are not able to use adaptors based on latest
chip rev of Broadcom's Gen P5 adaptors.

Fixes: ae8637e1 ("RDMA/bnxt_re: Add chip context to identify 57500 series")
Link: https://lore.kernel.org/r/1574317343-23300-2-git-send-email-devesh.sharma@broadcom.comSigned-off-by: NNaresh Kumar PBS <nareshkumar.pbs@broadcom.com>
Signed-off-by: NSelvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: NLuke Starrett <luke.starrett@broadcom.com>
Signed-off-by: NDevesh Sharma <devesh.sharma@broadcom.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Adjust indentation from spaces to tab (+optional two spaces) as in coding
style with command like:
	$ sed -e 's/^        /\t/' -i */Kconfig

Link: https://lore.kernel.org/r/20191120134138.15245-1-krzk@kernel.orgSigned-off-by: NKrzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Danit Goldberg says:

====================
This series extends RTNETLINK to provide IB port and node GUIDs, which
were configured for Infiniband VFs.

The functionality to set VF GUIDs already existed for a long time, and
here we are adding the missing "get" so that netlink will be symmetric and
various cloud orchestration tools will be able to manage such VFs more
naturally.

The iproute2 was extended too to present those GUIDs.

- ip link show <device>

For example:
- ip link set ib4 vf 0 node_guid 22:44:33:00:33:11:00:33
- ip link set ib4 vf 0 port_guid 10:21:33:12:00:11:22:10
- ip link show ib4
    ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256
    link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
    vf 0     link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
    spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off
====================

Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies

* branch 'ib-guids': (35 commits)
  IB/mlx5: Implement callbacks for getting VFs GUID attributes
  IB/ipoib: Add ndo operation for getting VFs GUID attributes
  IB/core: Add interfaces to get VF node and port GUIDs
  net/core: Add support for getting VF GUIDs

  net/mlx5: Add new chain for netfilter flow table offload
  net/mlx5: Refactor creating fast path prio chains
  net/mlx5: Accumulate levels for chains prio namespaces
  net/mlx5: Define fdb tc levels per prio
  net/mlx5: Rename FDB_* tc related defines to FDB_TC_* defines
  net/mlx5: Simplify fdb chain and prio eswitch defines
  IB/mlx5: Load profile according to RoCE enablement state
  IB/mlx5: Rename profile and init methods
  net/mlx5: Handle "enable_roce" devlink param
  net/mlx5: Document flow_steering_mode devlink param
  devlink: Add new "enable_roce" generic device param
  net/mlx5: fix spelling mistake "metdata" -> "metadata"
  net/mlx5: fix kvfree of uninitialized pointer spec
  IB/mlx5: Introduce and use mlx5_core_is_vf()
  net/mlx5: E-switch, Enable metadata on own vport
  net/mlx5: Refactor ingress acl configuration
  ...
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Implement the IB defined callback mlx5_ib_get_vf_guid used to query FW
for VFs attributes and return node and port GUIDs.
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Add ndo operation to the network driver that enables configuring
ipoib_get_vf_guid operation. The operation allows to get a VF port
and node GUIDs.
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Provide ability to get node and port GUIDs of VFs to be symmetrical
to already existing set option.
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

Introduce a new ndo: ndo_get_vf_guid, to get from the net
device the port and node GUID.

New applications can choose to use this interface to show
GUIDs with iproute2 with commands such as:

- ip link show ib4
ib4: <BROADCAST,MULTICAST> mtu 4092 qdisc noop state DOWN mode DEFAULT group default qlen 256
link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff
vf 0     link/infiniband 00:00:0a:2d:fe:80:00:00:00:00:00:00:ec:0d:9a:03:00:44:36:8d brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff,
spoof checking off, NODE_GUID 22:44:33:00:33:11:00:33, PORT_GUID 10:21:33:12:00:11:22:10, link-state disable, trust off, query_rss off
Signed-off-by: NDanit Goldberg <danitg@mellanox.com>
Acked-by: NDavid Ahern <dsahern@gmail.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>

When running against rdma-core that doesn't support doorbell recovery, the
rdma_user_mmap_entry won't be allocated for doorbell recovery related
mappings.

We have a flag indicating whether rdma-core supports doorbell recovery or
not which was used during initialization, however some cases didn't check
that the rdma_user_mmap_entry exists before attempting to acquire it's
offset.

Fixes: 97f61250 ("RDMA/qedr: Add doorbell overflow recovery support")
Link: https://lore.kernel.org/r/20191118150645.26602-1-michal.kalderon@marvell.comSigned-off-by: NAriel Elior <ariel.elior@marvell.com>
Signed-off-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This atomic in struct cm_id_private is being used as a refcount, change it
to refcount_t for better clarity and to get the refcount protections.

Link: https://lore.kernel.org/r/1573997601-4502-1-git-send-email-danitg@mellanox.comSigned-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Extends the minimum single WQE strides from 64 to 8, which is exposed
by the "min_single_wqe_log_num_of_strides" field of striding_rq_caps.
Choose right number of strides based on FW capability.

Link: https://lore.kernel.org/r/20191115154555.247856-1-leon@kernel.orgSigned-off-by: NMark Zhang <markz@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

When adding a new GID compare the vlan along with the GID and type. This
allows vlan's to have GIDs that alias each other, such as the default
GID. Otherwise they the GID cache view can become inconsistent with the HW
view.

Link: https://lore.kernel.org/r/20191115154457.247763-1-leon@kernel.orgSigned-off-by: NDanit Goldberg <danitg@mellanox.com>
Reviewed-by: NParav Pandit <parav@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

We should jump to fail3 in order to undo the 'xa_insert_irq()' call.

Link: https://lore.kernel.org/r/20190923190746.10964-1-christophe.jaillet@wanadoo.frSigned-off-by: NChristophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The cma is currently using a hard-coded value, CMA_IBOE_PACKET_LIFETIME,
for the PacketLifeTime, as it can not be determined from the network.
This value might not be optimal for all networks.

The cma module supports the function rdma_set_ack_timeout to set the ACK
timeout for a QP associated with a connection. As per IBTA 12.7.34 local
ACK timeout = (2 * PacketLifeTime + Local CA’s ACK delay).  Assuming a
negligible local ACK delay, we can use PacketLifeTime = local ACK
timeout/2 as a reasonable approximation for RoCE networks.

Link: https://lore.kernel.org/r/1572439440-17416-1-git-send-email-dag.moxnes@oracle.comSigned-off-by: NDag Moxnes <dag.moxnes@oracle.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The argument is always ignored, so remove it.

Link: https://lore.kernel.org/r/20191113073214.9514-3-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Acked-by: NMichal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

This flag is not implemented by any backend and only set by the ib_umem
module in a single instance.

Link: https://lore.kernel.org/r/20191113073214.9514-2-hch@lst.deSigned-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

We cannot rely on the entry memcpy as we only copy the actual size of the
command, the rest of the bytes must be memset to zero.

Currently providing non-zero memory will not have any user visible impact.
However, since admin commands are extendable (in a backwards compatible
way) everything beyond the size of the command must be cleared to prevent
issues in the future.

Fixes: 0420e542 ("RDMA/efa: Implement functions that submit and complete admin commands")
Link: https://lore.kernel.org/r/20191112092608.46964-1-galpress@amazon.comReviewed-by: NDaniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: NFiras JahJah <firasj@amazon.com>
Signed-off-by: NGal Pressman <galpress@amazon.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Removes obsolete driver specific mmap information after
generalization of RDMA driver mmap service. Also removes
useless forward declaration of struct siw_mr.

Fixes: 11f1a755 ("RDMA/siw: Use the common mmap_xa helpers")
Link: https://lore.kernel.org/r/20191113153404.7402-1-bmt@zurich.ibm.comSigned-off-by: NBernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The function qedr_iw_load_qp() is only used in qedr_iw_cm.c

Fixes: 82af6d19 ("RDMA/qedr: Fix synchronization methods and memory leaks in qedr")
Link: https://lore.kernel.org/r/20191110113645.20058-1-kamalheib1@gmail.comSigned-off-by: NKamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

There is a spelling mistake in the variable nak_invalid_requst_errors,
rename it to nak_invalid_request_errors.

Link: https://lore.kernel.org/r/20191107224855.417647-1-colin.king@canonical.comSigned-off-by: NColin Ian King <colin.king@canonical.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

The permissions of the read-only or write-only sysfs files can be
changed (as root) and the user can then try to read a write-only file or
write to a read-only file which will lead to kernel crash here.

Protect against that by always validating the show/store callbacks.

Link: https://lore.kernel.org/r/d45cc26361a174ae12dbb86c994ef334d257924b.1573096807.git.viresh.kumar@linaro.orgSigned-off-by: NViresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Release variable dst after logging dst->error to avoid possible use after
free.

Link: https://lore.kernel.org/r/1573022651-37171-1-git-send-email-bianpan2016@163.comSigned-off-by: NPan Bian <bianpan2016@163.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Move the release operation after error log to avoid possible use after
free.

Link: https://lore.kernel.org/r/1573021434-18768-1-git-send-email-bianpan2016@163.comSigned-off-by: NPan Bian <bianpan2016@163.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Reviewed-by: NJason Gunthorpe <jgg@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Netfilter tables (nftables) implements a software datapath that
comes after tc ingress datapath. The datapath supports offloading
such rules via the flow table offload API.

This API is currently only used by NFT and it doesn't provide the
global priority in regards to tc offload, so we assume offloading such
rules must come after tc. It does provide a flow table priority
parameter, so we need to provide some supported priority range.

For that, split fastpath prio to two, flow table offload and tc offload,
with one dedicated priority chain for flow table offload.

Next patch will re-use the multi chain API to access this chain by
allowing access to this chain by the fdb_sub_namespace.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Next patch will re-use this to add a new chain but in a
different prio.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Tc chains are implemented by creating a chained prio steering type, and
inside it there is a namespace for each chain (FDB_TC_MAX_CHAINS). Each
of those has a list of priorities.

Currently, all namespaces in a prio start at the parent prio level.
But since we can jump from chain (namespace) to another chain in the
same prio, we need the levels for higher chains to be higher as well.
So we created unused prios to account for levels in previous namespaces.

Fix that by accumulating the namespaces levels if we are inside a chained
type prio, and removing the unused prios.

Fixes: 328edb49 ('net/mlx5: Split FDB fast path prio to multiple namespaces')
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Define FDB_TC_LEVELS_PER_PRIO instead of magic number 2.
This is the number of levels used by each tc prio table in the fdb.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

Rename it to prepare for next patch that will add a
different type of offload to the FDB.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

FDB_MAX_CHAIN and FDB_MAX_PRIO were defined differently depending
on if CONFIG_MLX5_ESWITCH is enabled to save space on allocations.

This is a minor space saving, and there is no real need for it.
Simplify things instead, and define them the same in both cases.
Signed-off-by: NPaul Blakey <paulb@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Acked-by: NPablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>

The code added by this patch is similar to the code that already exists in
ibmvscsis_determine_resid(). This patch has been tested by running the
following command:

strace sg_raw -r 1k /dev/sdb 12 00 00 00 60 00 -o inquiry.bin |&
    grep resid=

Link: https://lore.kernel.org/r/20191105214632.183302-1-bvanassche@acm.org
Fixes: a42d985b ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: NBart Van Assche <bvanassche@acm.org>
Acked-by: NHonggang Li <honli@redhat.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

Add support for flow steering counters action with a non-base counter
ID (offset) for bulk counters.

When creating a flow counter object, save the bulk value.  This value is
used when a flow action with a non-base counter ID is requested - to
validate that the required offset is in the range of the allocated bulk.

Link: https://lore.kernel.org/r/20191103140723.77411-1-leon@kernel.orgSigned-off-by: NYevgeny Kliteynik <kliteyn@mellanox.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NMark Bloch <markb@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

All users of process_mad() converts input pointers from ib_mad_hdr to be
ib_mad, update the function declaration to use ib_mad directly.

Also remove not used input MAD size parameter.

Link: https://lore.kernel.org/r/20191029062745.7932-17-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Tested-By: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>

All callers allocate MAD structures with proper sizes, there is no need to
recheck it.

Link: https://lore.kernel.org/r/20191029062745.7932-8-leon@kernel.orgSigned-off-by: NLeon Romanovsky <leonro@mellanox.com>
Signed-off-by: NJason Gunthorpe <jgg@mellanox.com>