ASoC: Updates for v4.5

This is quite a busy release on the driver front with a lot of new
drivers being added but comparatively quiet on the core side with only
one big change going in and that a fairly straightforward refactoring.

 - Conversion of the array of DAI links to a list by Mengdong Lin,
   supporting dynamically adding and removing DAI links.
 - Some more fixes for the topology code, though it is still not final
   and ready for enabling in production.  We really need to get to the
   point where that can be done.
 - A pile of changes for Intel SkyLake drivers which hopefully deliver
   some useful initial functionality for systems with this chipset,
   though there is more work still to come.
 - New drivers for a number of Imagination Technologies IPs.
 - Lots of new features and cleanups for the Renesas drivers.
 - ANC support for WM5110.
 - New driver for Atmel class D speaker drivers.
 - New drivers for Cirrus CS47L24 and WM1831.
 - New driver for Dialog DA7128.
 - New drivers for Realtek RT5659 and RT56156.
 - New driver for Rockchip RK3036.
 - New driver for TI PC3168A

# gpg: Signature made Wed 23 Dec 2015 00:42:40 GMT using RSA key ID 5D5487D0
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3F25 68AA C269 98F9 E813  A1C5 C3F4 36CA 30F5 D8EB
#      Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2  9FEA 24D6 8B72 5D54 87D0

ASoC: Last minute fixes for v4.4

A few final fixes for v4.4, the main one being the two patches to the
new Sky Lake drivers which fix a previous incorrect fix that went in
during an earlier -rc.

# gpg: Signature made Wed 06 Jan 2016 17:12:57 GMT using RSA key ID 5D5487D0
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg:          There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 3F25 68AA C269 98F9 E813  A1C5 C3F4 36CA 30F5 D8EB
#      Subkey fingerprint: ADE6 68AA 6757 18B5 9FE2  9FEA 24D6 8B72 5D54 87D0

A recent rework removed the only user of the hdac_hdmi_query_pin_connlist
function, so we now get a warning when building the hdac_hdmi driver:

hdac_hdmi.c:313:12: warning: 'hdac_hdmi_query_pin_connlist' defined but not used [-Wunused-function]

This removes the function, which makes the file build cleanly again.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Fixes: 15b91447 ("ASoC: hdac_hdmi: Use list to add pins and converters")
Signed-off-by: NMark Brown <broonie@kernel.org>

arm:allmodconfig, s390:allmodconfig, sparc64:allmodconfig, and probably
other builds fail with

sound/soc/amd/acp-pcm-dma.c:83:2: error:
	implicit declaration of function ‘readl’
sound/soc/amd/acp-pcm-dma.c:88:2: error:
	implicit declaration of function ‘writel’

Include linux/io.h explicitly to fix the problem.

Fixes: 7c31335a ("ASoC: AMD: add AMD ASoC ACP 2.x DMA driver")
Cc: Maruthi Srinivas Bayyavarapu <Maruthi.Bayyavarapu@amd.com>
Signed-off-by: NGuenter Roeck <linux@roeck-us.net>
Signed-off-by: NMark Brown <broonie@kernel.org>

aux_dev is mainly used by the machine driver to specify analog devices,
which are registered as codecs. Making it more like a generic component
can help the machine driver to use it to specify any component with
topology info by name.

Details:
- Remove the stub 'rtd_aux' array from the soc card.
- Add a list 'aux_comp_list' to store the components of aux_devs.
  And add a list head 'list_aux' to struct snd_soc_component, for adding
  such components to the above list.
- Add a 'init' ops to a component for machine specific init.
  soc_bind_aux_dev() will set it to be aux_dev's init. And it will be
  called when probing the component.
- soc_bind_aux_dev() will also search components by name of an aux_dev,
  since it may not be a codec.
- Move probing of aux_devs before checking new DAI links brought by
  topology.
- Move removal of aux_devs later than removal of links. Because topology
  of aux components may register DAIs and the DAI drivers will go with
  removal of the aux components, we want soc_remove_link_dais() to remove
  the DAIs at first.
Signed-off-by: NMengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

ACP SRAM banks gets turned on when ACP is powered on.
Not all banks are used for playback/capture. So, power on
required banks during audio device open and power off during
audio device close.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

genpd will power off/on ACP to manage runtime ACP PM. ACP runtime PM
hooks are added to get it deinitialized and initialized respectively,
after it is powered off/on.

When system goes to suspend when audio usecase is active, ACP will
be powered off through genpd. When it resumes, ACP needs to be
initialized and reconfigured.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

ACP IP has internal DMA controller with multiple channels which
can be programmed in cyclic/non cyclic manner. ACP can generate
interrupt upon completion of DMA transfer, if required.
The PCM driver provides the platform DMA component to ALSA core.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NMurali Krishna Vemuri <murali-krishna.vemuri@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

These are register headers for the ACP (Audio CoProcessor) v2.2
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

This patch adds pcm capability to support Resume.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

On suspend the link register are lost so we need to reconfigure
them in resume. This patch adds the reconfiguration of the link
register in trigger resume.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Use the DMA resume capability to resume the DMA position when
stream is suspended/resumed.

In suspend we save the position and when stream is resumed the stream needs
to be started from the position when the stream was suspended using the new
DMA resume capabilities
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

In active suspend, any HDA interrupt should wake the system. When device
enters active suspend, we need to enable HDA controller interrupt as wake
source. Similarly disable HDA controller interrupt as wake source when
exiting active suspend.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

When device enters active suspend, we should turn off the links
as they are not in use. Similarly we need to bring back links
when we exit active suspend.
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Per HW recommendation, SW shall clear the CGCTL.MISCBDCGE and set
it back once data is transferred. So clear this when we get the
IPC and track using a driver flag, and set back on closure
Signed-off-by: NDharageswari.R <dharageswari.r@intel.com>
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

MISCBDCGE is a new register for Misc Backbone clock gate control
which is useful to control while resetting the link and ensuring
controller is in required state so add API to control it

HW recommends that we reset with CGCTL.MISCBDCGE disabled, so add
that while doing init chip and reset sequence.
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Merge branch 'topic/hdac' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel

DWC for capture in ACP 2.x IP reports playback and capture capabilities
though it supports only capture. Added a quirk to override default value
to represent capture capability only.
Signed-off-by: NMaruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Define API snd_soc_register_dai() to add a DAI dynamically and
create the DAI widgets. Topology can use this API to register DAIs
when probing a component with topology info. These DAIs's playback
& capture widgets will be freed when the sound card is unregistered
and the DAIs will be freed when cleaning up the component.

And a dobj is embedded into the struct snd_soc_dai_driver. Topology
can use the dobj to find the DAI drivers created by it and free them
when the topology component is removed.
Signed-off-by: NMengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Define soc_add_dai() as a wrapper to add a single DAI to a component.
It can be reused to register a DAI dynamically by topology.
Signed-off-by: NMengdong Lin <mengdong.lin@linux.intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

We have an API for powering down all links, we need a similar one
for powering up links, so add for power up as well
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

HW recommends 180us for worst case values for link power up
delay, so change the current delay value from 50 (150us) to 150
(450us)
Signed-off-by: NJayachandran B <jayachandran.b@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

A stream is by default in coupled mode, in DSP operation we move
it to decoupled mode. On cleanup HW expects that we leave it back
to default state so couple the DMA on cleanup.
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

Skylake sports new capability of DMA resume, DRSM where we can
resume the DMA. This capability is defined by presence of
AZX_DRSM_CAP_ID.

If this capability is present, we use this capability.
So we add:

snd_hdac_ext_stream_drsm_enable() - DMA resume caps
snd_hdac_ext_stream_set_dpibr() - set the DMA position
snd_hdac_ext_stream_set_lpib() - set the lpib
Signed-off-by: NJeeja KP <jeeja.kp@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Reviewed-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NMark Brown <broonie@kernel.org>

pcm1792a is compatible with pcm1795 and pcm1796 so it's
better to have them under the common name pcm179x
Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Signed-off-by: NMichael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

The detection of direction for compress was only taking into account codec
capabilities and not CPU ones. Fix this by checking the CPU side capabilities
as well

Cc: <stable@vger.kernel.org>
Tested-by: NAshish Panwar <ashish.panwar@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Future platforms may have a different set of pins/converters.
So use lists to add pins and converters based on enumeration.

Also it may be required to connect any converter to any pin
dynamically as per different use cases (for example DP is
connected to pin 6 on skylake board). So this will help in
dynamically select and route.

Fix the dai map as well to use the pin/cvt from list. Not
enabling all dai maps for now.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

It is possible that some pin widget may return with no converter
connected. So don't throw error if none are found to be connected.
Instead print a warning and continue.
Signed-off-by: NSubhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: NVinod Koul <vinod.koul@intel.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Data is read in blocks of up to one fragment is size from the circular
buffer on the DSP and is re-packed to remove the padding byte that
exists in the DSP memory map.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>

Here support is added for responding to DSP IRQs that are used to
indicate data being available on the DSP. The idea is that we check the
amount of data available upon receipt of an IRQ and on subsequent calls
to the pointer callback we recheck once less than one fragment is
available (to avoid excessive SPI traffic), if there is truely less than
one fragment available we ack the last IRQ and wait for a new one.
Signed-off-by: NCharles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: NMark Brown <broonie@kernel.org>