[Why]
The aux_engine struct is needlessly complex and
is defined multiple times.  It contains function pointers
that each have only one version and are called only from
inside dce_aux.

[How]
Replace aux_engine with a new struct called dce_aux.
Remove all function pointers and call functions directly.
Remove unused functions
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The old aux interface goes through i2caux and the aux_engine
and engine function pointers.  The multiple layers of indirection
make it hard to tell waht is happening.  The aux algorithm
does not need to be this complicated: attempt to submit the
request.  If you get an ack (reply = 0), stop.  Otherwise,
retry, up to 7 times.

[How]
Add a new helper function in dce_aux that performs aux retries

Move the plumbing of the aux calling code into dce_aux

Add functions in ddc that redirect directly to dce_aux

Make all aux calls use these functions
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
aux_payload should be the struct used inside dc to start
aux transactions.  This will allow the old aux interface
to be seamlessly replaced.

[How]
Add three fields to aux_payload: reply, mot, defer_delay
This will mean that aux_payload has all data required
to submit a request.  Shift dc_link to use this struct
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NSteven Chiu <steven.chiu@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The cursor vanishes when touching the top of edge of the screen for
Raven on Linux.

This occurs because the cursor height is not taken into account when
deciding to disable the cursor.

[How]
Factor in the cursor height into the cursor calculations - and mimic
the existing x position calculations.

Fixes: 94a4ffd1 ("drm/amd/display: fix PIP bugs on Dal3")
Signed-off-by: NNicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
If eDP ver >= 1.4,
the Source device must use LINK_RATE_SET.

[How]
Get LINK_RATE_SET by reading DPCD 10h-1fh,
then write DPCD 00115h before link training.
Signed-off-by: NDerek Lai <Derek.Lai@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
To resume system before entering S0i3 completely will cause PSP not
reload DMCU FW since there is not HW power state change.
In this case, driver cannot get correct DMCU version from IRAM
since driver override it and DMCU didn't reload to update it.
It makes driver return false in dcn10_dmcu_init().

[how]
1.To redefine DMCU_SCRATCH to identify different DMCU state.
2.To reserve IRAM 0xF0~0xFF write by DMCU only.
3.To remove dcn10_get_dmcu_state
Signed-off-by: NMartin Tsai <martin.tsai@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PPLIB not receive the PME when unplug.
Signed-off-by: NCharlene Liu <charlene.liu@amd.com>
Reviewed-by: NChris Park <Chris.Park@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
separate register access from logic to allow us abstract register sequences

[how]
consolidate mask and value first then apply to register.
Signed-off-by: NTony Cheng <tony.cheng@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
1-Test equipment does not reset test automation flag after completing
current test causing the next test to fail.
2.When test request is empty, we shouldn't ack the test.

[How]
1-Driver should always clear test equipment automation test request
when request is completed.
2-Driver should clear test equipement test automation if driver does
not complete the request.
Signed-off-by: Nabdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: NWenjing Liu <Wenjing.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The driver will crash on dce hardware due to a null function pointer.

[How]
- bring back "program_csc_matrix" functionality as "program_output_csc" for
dce110
- dce110 doesn't use the "opp_id" parameter, so use 0 when there's no hubp
Signed-off-by: NJoshua Aberback <joshua.aberback@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NJun Lei <Jun.Lei@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NSteven Chiu <steven.chiu@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fix boolean expression by using logical AND operator '&&'
instead of bitwise operator '&'.

This issue was detected with the help of Coccinelle.

Fixes: 6d04ee9d ("drm/amd/display: Restructuring and cleaning up DML")
Signed-off-by: NGustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: NHarry Wentland <harry.wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
32-bit builds break when doing 64-bit division directly.

[How]
Use the div_u64() function instead to perform the division.

Fixes: https://lists.freedesktop.org/archives/dri-devel/2018-December/201008.htmlSigned-off-by: NKen Chalmers <ken.chalmers@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Initializing structures with { } is known to be problematic since
it doesn't necessararily initialize all bytes, in case of padding,
causing random failures when structures are memcmp().

This patch fixes the structure initialisation related compiler
error by memset.
Signed-off-by: NShirish S <shirish.s@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
For more informative debugging.

[How]
Add timing generator and PLL ids to output, to make it clear which pixel
clock is being set.
Signed-off-by: NKen Chalmers <ken.chalmers@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove reg_helper.h which is included more than once
Signed-off-by: NBrajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove custom_float.h which is included more than once
Signed-off-by: NBrajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Remove custom_float.h which is included more than once
Acked-by: NSouptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: NBrajeswar Ghosh <brajeswar.linux@gmail.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

There are several variables that are defined and never used and hence can
be removed. Remove them. Cleans up clang -Wunused-const-variable warnings:

warning: ‘dvi_hdmi_dongle_signature_str’ defined but not used
warning: ‘dce11_one_lpt_channel_max_resolution’ defined but not used
warning: ‘ddc_hw_status_addr’ defined but not used
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
The function dc_commit_updates_for_stream had a parameter called
plane_states.  It was never used.  It was getting in the way
of some cleanup work

[How]
Remove it
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow us to program dscclk to required value
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
PPLib has impelemented the new pp_smu interface

[How]
Use the new functions if available instead of the old interface
'set_display_requirement' and 'dcn1_pplib_apply_display_requirements'.
Signed-off-by: NFatemeh Darbehani <fatemeh.darbehani@amd.com>
Reviewed-by: NFatemeh Darbehani <Fatemeh.Darbehani@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Acked-by: NSu Chung <Su.Chung@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NSteven Chiu <steven.chiu@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
When XGMI is enabled, we need to adjust the dprefclk according to the
WAFL link's spread spectrum info. This is for VG20 (DCE121) only.

[How]
dce_clk_mgr already stores SS info, currently being used by audio clock.
Therefore, patch the clk_mgr's SS info with the xGMI SS info, if xGMI
is enabled. For display clock, adjust it during dce12_update_clocks()
before calling set_clock().

Since we rely on a mmhub register to reliably determine if xGMI is
enabled, the patching step needs to happen after resource_construct()
has initialized the hardware sequencer.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NHersen Wu <hersenxs.wu@amd.com>
Acked-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
This fixes an regression introduced by:
    drm/amd/display: add stream ID and otg instance in dc_stream_state

During driver initialization, a null pointer deref is raised. This is
caused by searching for a stream status in the dc->current_state before
the dc_state swap happens at the end of dc_commit_state_no_check().
Since the swap has not happened, the dc_state to be swapped in should
be searched, and not dc->current_state.

[How]
Add a function that searches for the stream status within the given
dc_state, instead of dc->current_state. Use that before the state swap
happens in dc_commit_state_no_check().

Also remove duplicate occurrences of this function in amdgpu_dm.c.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NNicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
context->bw.dce.dispclk_khz is being cached into unpatched_clock, then
restored at end of function call. This is needlessly complex

[How]
Instead, use a local patched_clock variable. Leave
context->bw.dce.dispclk_khz alone.

No functional change is intended.
Signed-off-by: NDavid Francis <david.francis@amd.com>
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
There are different reasons for Validation failure error during
atomic_check

[How]
Add better logging of the reason for validation failure
Signed-off-by: NEric Bernstein <eric.bernstein@amd.com>
Reviewed-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Users would like more accurate pixel clocks, especially for fractional
"TV" frame rates like 59.94 Hz.

[How]
Store and communicate pixel clocks with 100 Hz accuracy from
dc_crtc_timing through to BIOS command table setpixelclock call.
Signed-off-by: NKen Chalmers <ken.chalmers@amd.com>
Reviewed-by: NCharlene Liu <Charlene.Liu@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
It's not being used anywhere.

[How]
Remove it.
Signed-off-by: NLeo Li <sunpeng.li@amd.com>
Reviewed-by: NDavid Francis <David.Francis@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NSteven Chiu <steven.chiu@amd.com>
Reviewed-by: NYongqiang Sun <yongqiang.sun@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
ABM enablement testing can be automated if a way of reading
target and current hardware backlight is available

[How]
Expand debugfs interface with two new entries.
Hook directly into dc interface.  Units are as
a fraction of 0x1000 = 100%

Use the built-in amdgpu function for creating
read-only debugfs files
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
stream ID allows DMs to avoid memory address comparisons to compare
stream equality.
otg_instance allows DC to more rigorously define when otg_instance
can change.  specifically, it is now defined to be only mutable when dc_stream_state
changes.  This is better than a "get status" function which prevents efficient
caching of otherwise very stable information.

[how]
stream ID follows similar pattern to sink ID, which is already implemented

otg_instance is an output which occurs on all dc_stream modification functions
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

DV have made updates to DCN dml which we need to pull in
Signed-off-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: NEric Bernstein <Eric.Bernstein@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
Backlight is conceptually a property of links, not streams.
All backlight programming is done on links, but there is a
stream property bl_pwm_level that is used to restore backlight
on dpms on and s3 resume.  This is unnecessary, as backlight
is already restored by hardware with no driver intervention.

[How]
Remove bl_pwm_level, and the stream argument to set_backlight
Signed-off-by: NDavid Francis <David.Francis@amd.com>
Reviewed-by: NHarry Wentland <Harry.Wentland@amd.com>
Acked-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

They're not being used, so remove them.
Signed-off-by: NImad Syed <imad.syed@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
dc_stream_state containing a pointer to sink is poor design.
Sink describes the display, and the specifications or capabilities
it has.  That information is irrelevant for dc_stream_state, which describes
hardware state, and is generally used for hardware programming.  It
could further be argued that dc_sink itself is just a convenience dc
provides, and DC should be perfectly capable of programming hardware
without any dc_sinks (for example, emulated sinks).

[how]
Phase 1:
Deprecate use of dc_sink pointer in dc_stream.  Most references are trivial
to remove, but some call sites are risky (such as is_timing_changed) with
no obvious logical replacement.  These will be removed in follow up change.

Add dc_link pointer to dc_stream.  This is the typical reason DC really needed
sink pointer, and most call sites are replaced with this.

DMs also need minor updates, as all 3 DMs leverage stream->sink for
some functionality.  this is replaced instead by a pointer to private data
inside dc_stream_state, which is used by DMs as a quality of life improvment
for some key functionality.  it allows DMs to set pointers have to their own objects
which associate OS objects to dc_stream_states (such as DisplayTarget
and amdgpu_dm_connector).  Without the private pointer, DMs would be
forced to perform a lookup for callbacks.
Signed-off-by: NJun Lei <Jun.Lei@amd.com>
Reviewed-by: NAric Cyr <Aric.Cyr@amd.com>
Acked-by: NDavid Francis <David.Francis@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
So that we can adjust fclk for debugging purposes.

[How]
Add option to force adjust fclk request to pplib.
Signed-off-by: NHugo Hu <hugo.hu@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[why]
There was a recent fix in the BW spreadsheet to allow timing with very
large vblank. Need to be ported into driver.
Signed-off-by: NEric Yang <Eric.Yang2@amd.com>
Reviewed-by: NTony Cheng <Tony.Cheng@amd.com>
Acked-by: NDmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

[Why]
We are not correctly handling the wrap around case.
VLine interrupt is relative to position of VUpdate interrupt.

Both VUpdate interrupt and VLine interrupt could possibly
be in front porch or back porch.

[How]
Fix wraparound case by checking for line number that is
greater than the VTOTAL of the OTG timing. In this case,
the interrupt should occur on the next frame.

Also fix some variable naming and remove some dead code.
Signed-off-by: NKrunoslav Kovac <Krunoslav.Kovac@amd.com>
Reviewed-by: NAnthony Koo <Anthony.Koo@amd.com>
Acked-by: NLeo Li <sunpeng.li@amd.com>
Acked-by: NTony Cheng <Tony.Cheng@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>