- 14 2月, 2015 5 次提交
-
-
由 Gregory CLEMENT 提交于
The Marvell Armada 38x SoCs contains an RTC which differs from the RTC used in the other mvebu SoCs until now. This forth version of the patch set adds support for this new IP and enable it in the Device Tree of the Armada 38x SoC. This patch (of 5): The Armada 38x SoCs come with a new RTC which differs from the one used in the other mvebu SoCs until now. This patch describes the binding of this RTC. Signed-off-by: NGregory CLEMENT <gregory.clement@free-electrons.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: Arnaud Ebalard <arno@natisbad.org> Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Boris BREZILLON <boris.brezillon@free-electrons.com> Cc: Lior Amsalem <alior@marvell.com> Cc: Tawfik Bayouk <tawfik@marvell.com> Cc: Nadav Haklai <nadavh@marvell.com> Cc: Mark Rutland <mark.rutland@arm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnaud Ebalard 提交于
This patch adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 RTC/Calendar module w/ I2C interface. This support includes RTC time reading and setting, Alarm (1 minute accuracy) reading and setting, and battery low detection. The device also supports frequency adjustment and two timers but those features are currently not implemented in this driver. Due to alarm accuracy limitation (and current lack of timer support in the driver), UIE mode is not supported. Signed-off-by: NArnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnaud Ebalard 提交于
This series adds support for Abracon AB-RTCMC-32.768kHz-B5ZE-S3 I2C RTC chip. Unlike many RTC chips, it includes an internal oscillator which spares room on the PCB. It also has some interesting features, like battery low detection (which the driver in this series supports). The only small "limitation" (mainly due to what RTC subsystem expects from RTC chips) is the fact that its alarm is accurate to the second. This series provides a solution (described below) for that limitation using another mechanism of the chip. I decided to split support between three different patches for this v0: - Patch 1/3: it simply references Abracon Corporation in vendor-prefixes documentation file. As Abracon has no NASDAQ ticker symbol; I have decided to use "abcn" (I initially started my work w/ "ab" but later changed for "abcn" which looked more meaningful) - Patch 2/3: it adds initial support for the chip and provides the ability to read/write time and also read/write alarm. As the alarm the chip provides is accurate to the minute, the support provided by this patch also has this limitation (e.g. UIE mode is not supported). - Patch 3/3: the chip supports a watchdog timer which can be used to extend the alarm mechanism in patch 2/3 in order to provide support for alarms under one minute (e.g. support UIE mode). In practice, the logic I implemented is to use the watchdog timer for alarms which are at most 4 minutes in the future and use the common alarm mechanism for alarms which are set to larger values. With that additional patch the device fully passes the rtctest.c program. I decided to split the driver between two patches (2 and 3 of 3) in order to ease review: patch 2 should be pretty straightforward to read for someone familiar w/ RTC subsystem. Patch 3 only extends what is in patch 2 regarding alarms. This patch (of 3): Documentation/devicetree/bindings/vendor-prefixes.txt: add vendor prefix for Abracon Corporation Signed-off-by: NArnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Rob Herring <robherring2@gmail.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnaud Ebalard 提交于
Current in-tree users of ISL12057 RTC chip (NETGEAR ReadyNAS 102, 104 and 2120) do not have the IRQ#2 pin of the chip (associated w/ the Alarm1 mechanism) connected to their SoC, but to a PMIC (TPS65251 FWIW). This specific hardware configuration allows the NAS to wake up when the alarms rings. Recently introduced alarm support for ISL12057 relies on the provision of an "interrupts" property in system .dts file, which previous three users will never get. For that reason, alarm support on those devices is not function. To support this use case, this patch adds a new DT property for ISL12057 (isil,irq2-can-wakeup-machine) to indicate that the chip is capable of waking up the device using its IRQ#2 pin (even though it does not have its IRQ#2 pin connected directly to the SoC). This specific configuration was tested on a ReadyNAS 102 by setting an alarm, powering off the device and see it reboot as expected when the alarm rang w/: # echo `date '+%s' -d '+ 1 minutes'` > /sys/class/rtc/rtc0/wakealarm # shutdown -h now As a side note, the ISL12057 remains in the list of trivial devices, because the property is not per se required by the device to work but can help handle system w/ specific requirements. In exchange, the new feature is described in details in a specific documentation file. Signed-off-by: NArnaud Ebalard <arno@natisbad.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Peter Huewe <peter.huewe@infineon.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Thierry Reding <treding@nvidia.com> Cc: Mark Brown <broonie@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Darshana Padmadas <darshanapadmadas@gmail.com> Cc: Rob Herring <rob.herring@calxeda.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Grant Likely <grant.likely@linaro.org> Cc: Rob Landley <rob@landley.net> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Cc: Kumar Gala <galak@codeaurora.org> Cc: Uwe Kleine-König <uwe@kleine-koenig.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joshua Clayton 提交于
Add compatible string "nxp,rtc-pcf2123" Document the binding Signed-off-by: NJoshua Clayton <stillcompiling@gmail.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 11 2月, 2015 1 次提交
-
-
由 Ajay Kumar 提交于
This patch is based on exynos-drm-next branch of Inki Dae's tree at: git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos.git DECON(Display and Enhancement Controller) is the new IP in exynos7 SOC for generating video signals using pixel data. DECON driver can be used to drive 2 different interfaces on Exynos7: DECON-INT(video controller) and DECON-EXT(Mixer for HDMI) The existing FIMD driver code was used as a template to create DECON driver. Only DECON-INT is supported as of now, and DECON-EXT support will be added later. The current version of the driver supports video mode displays. Changelog v2: - Change config name, DRM_EXYNOS_DECON to DRM_EXYNOS7_DECON. Signed-off-by: NAkshu Agrawal <akshua@gmail.com> Signed-off-by: NAjay Kumar <ajaykumar.rs@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
- 07 2月, 2015 2 次提交
-
-
由 Marek Szyprowski 提交于
Mixed need to have hdmi clock enabled to properly perform power on/off sequences, so add handling of this clock directly to the mixer driver. Dependency between hdmi clock and mixer module has been observed on Exynos4 based boards. Suggested-by: NAndrzej Hajda <a.hajda@samsung.com> Reviewed-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Tested-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NInki Dae <inki.dae@samsung.com>
-
由 Kenneth Westfield 提交于
Add documentation to the sound directory of the device-tree bindings for the Maxim MAX98357A audio DAC. Signed-off-by: NKenneth Westfield <kwestfie@codeaurora.org> Acked-by: NBanajit Goswami <bgoswami@codeaurora.org> Signed-off-by: NMark Brown <broonie@kernel.org>
-
- 06 2月, 2015 1 次提交
-
-
由 Ley Foon Tan 提交于
The Altera mailbox allows for interprocessor communication. It supports only one channel and work as either sender or receiver. Signed-off-by: NLey Foon Tan <lftan@altera.com>
-
- 05 2月, 2015 7 次提交
-
-
This patch adds binding for the jz4740-i2s driver. Signed-off-by: NZubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Acked-by: NLars-Peter Clausen <lars@metafoo.de> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Kaixu Xia 提交于
Now we use the device name to identify replicator instead of a unique number, so just remove it. Signed-off-by: NKaixu Xia <xiakaixu@huawei.com> Signed-off-by: NMathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Fabio Estevam 提交于
OmniVision Technologies is a manufacturer of CMOS Image Sensors. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Fabio Estevam 提交于
The correct symbol for OmniVision Technologies is 'ovti', so let's convert it. Signed-off-by: NFabio Estevam <fabio.estevam@freescale.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Liu Ying 提交于
Signed-off-by: NLiu Ying <Ying.Liu@freescale.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Liu Ying 提交于
Signed-off-by: NLiu Ying <Ying.Liu@freescale.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Pantelis Antoniou 提交于
Introduce I2C device tree overlay tests. Tests insertion and removal of i2c adapters, i2c devices, and muxes. Signed-off-by: NPantelis Antoniou <pantelis.antoniou@konsulko.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
- 04 2月, 2015 7 次提交
-
-
由 Tomi Valkeinen 提交于
Add device tree binding documentation for DRA7xx display subsystem. Signed-off-by: NTomi Valkeinen <tomi.valkeinen@ti.com> Cc: devicetree@vger.kernel.org
-
由 Marek Szyprowski 提交于
This patch provides a simple mmc-pwrseq-emmc driver, which controls single gpio line. It perform standard eMMC hw reset procedure, as descibed by Jedec 4.4 specification. This procedure is performed just after MMC core enabled power to the given mmc host (to fix possible issues if bootloader has left eMMC card in initialized or unknown state), and before performing complete system reboot (also in case of emergency reboot call). The latter is needed on boards, which doesn't have hardware reset logic connected to emmc card and (limited or broken) ROM bootloaders are unable to read second stage from the emmc card if the card is left in unknown or already initialized state. Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Paul Walmsley 提交于
DT maintainers require all compatible strings used in chip or board DTS file to be previously documented somewhere in Documentation/devicetree/bindings, per: http://marc.info/?l=linux-tegra&m=142201349727836&w=2 Document this requirement in the DT patch submission requirements text file. This second version updates the documentation to align with Rob's comments here: http://marc.info/?l=devicetree&m=142255654213019&w=2Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: linux-kernel@vger.kernel.org Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Paul Walmsley 提交于
Add a compatible string for the NVIDIA Denver CPU to the ARM CPU DT binding documentation file. The primary objective here is to keep checkpatch.pl from warning when the compatible string is used in an SoC DT file, per: http://marc.info/?l=linux-tegra&m=142201349727836&w=2 This second version changes the string from "nvidia,denver" to "nvidia,tegra132-denver" to more precisely describe the revision of the Denver CPU complex that is present in the Tegra132 SoC. Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Olof Johansson <olof@lixom.net> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Rohit Vaswani <rvaswani@codeaurora.org> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Marc Carino <marc.ceeeee@gmail.com> Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Paul Walmsley 提交于
Align compatible strings for several IP blocks present on Tegra chips with the latest doctrine from the DT maintainers: http://marc.info/?l=devicetree&m=142255654213019&w=2 The primary objective here is to avoid checkpatch warnings, per: http://marc.info/?l=linux-tegra&m=142201349727836&w=2 DT binding text files have been updated for the following IP blocks: - PCIe - SOR - SoC timers - AHB "gizmo" - APB_MISC - pinmux control - UART - PWM - I2C - SPI - RTC - PMC - eFuse - AHCI - HDA - XUSB_PADCTRL - SDHCI - SOC_THERM - AHUB - I2S - EHCI - USB PHY N.B. The nvidia,tegra20-timer compatible string is removed from the nvidia,tegra30-timer.txt documentation file because it's already mentioned in the nvidia,tegra20-timer.txt documentation file. This second version takes into account the following requests from Rob Herring <robherring2@gmail.com>: - Per-IP block patches have been combined into a single patch - Explicit documentation about which compatible strings are actually matched by the driver has been removed. In its place is implicit documentation that loosely follows Rob's prescribed format: "Must contain '"nvidia,<chip>-pcie", "nvidia,tegra20-pcie"' where <chip> is tegra30, tegra132, ..." [...] "You should attempt to document known values of <chip> if you use it" Signed-off-by: NPaul Walmsley <paul@pwsan.com> Cc: Alexandre Courbot <gnurou@gmail.com> Cc: Dylan Reid <dgreid@chromium.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Jingchang Lu <jingchang.lu@freescale.com> Cc: John Crispin <blogic@openwrt.org> Cc: Kumar Gala <galak@codeaurora.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mikko Perttunen <mperttunen@nvidia.com> Cc: Murali Karicheri <m-karicheri2@ti.com> Cc: Paul Walmsley <pwalmsley@nvidia.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter De Schrijver <pdeschrijver@nvidia.com> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: Stephen Warren <swarren@wwwdotorg.org> Cc: Takashi Iwai <tiwai@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: "Terje Bergström" <tbergstrom@nvidia.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Tuomas Tynkkynen <ttynkkynen@nvidia.com> Cc: Wolfram Sang <wsa@the-dreams.de> Cc: Zhang Rui <rui.zhang@intel.com> Cc: dri-devel@lists.freedesktop.org Cc: linux-i2c@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-pci@vger.kernel.org Cc: linux-pm@vger.kernel.org Cc: linux-pwm@vger.kernel.org Cc: linux-tegra@vger.kernel.org Acked-by: NEduardo Valentin <edubezval@gmail.com> Signed-off-by: NRob Herring <robh@kernel.org>
-
由 Shruti Kanetkar 提交于
The device tree binding(s) document has fallen out of sync with the driver code. Update the list of supported devices to reflect current driver capabilities Change-Id: I440d8de2ee2d9c3b7b23e69b3da851cab18a4c9a Signed-off-by: NShruti Kanetkar <Kanetkar.Shruti@gmail.com> Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vignesh R 提交于
This patch reads charge delay from tsc DT node and writes to REG_CHARGEDELAY register. If the charge delay is not specified in DT then default value of 0x400(CHARGEDLY_OPENDLY) is used. Signed-off-by: NVignesh R <vigneshr@ti.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
- 03 2月, 2015 3 次提交
-
-
由 Rob Herring 提交于
Add a new compatible string for PXA1928 GPIO controller. The IP block is same as prior chips with a 6th bank added. Signed-off-by: NRob Herring <robh@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Jyri Sarha 提交于
Disables GPIO support and LINE2 input and renames Mic3 input to Mic2, if tlv320aic3104 mode is seleced. Devicetree binding document is updated accordingly. Signed-off-by: NJyri Sarha <jsarha@ti.com> Signed-off-by: NMark Brown <broonie@kernel.org>
-
由 Chunyan Zhang 提交于
Adds Spreadtrum's prefix "sprd" to vendor-prefixes file. Adds the devicetree binding documentations for Spreadtrum's sc9836-uart and SC9836 SoC based on the Sharkl64 Platform which is a 64-bit SoC Platform of Spreadtrum. Signed-off-by: NChunyan Zhang <chunyan.zhang@spreadtrum.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 02 2月, 2015 2 次提交
-
-
由 Stephane Viau 提交于
In the same idea mdp5_cfg was added, this change allows us to quickly add new instances, such as apq8084's HDMI in this case. Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
由 Stephane Viau 提交于
This change add the regulator/clock configuration for MDP5 v1.3. This config is close to the one already existing for 8x74, except that one more regulator is needed (hpd-5v-en). Signed-off-by: NStephane Viau <sviau@codeaurora.org> Signed-off-by: NRob Clark <robdclark@gmail.com>
-
- 30 1月, 2015 12 次提交
-
-
由 Stanimir Varbanov 提交于
Adds devicetree binding documentation. Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com> Reviewed-by: NBjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Peter Griffin 提交于
Based on Arnds review comments here https://lkml.org/lkml/2014/11/13/161, update the miphy365 phy driver to access sysconfig register offsets via syscfg dt property. This is because the reg property should not be mixing address spaces like it does currently for miphy365. This change then also aligns us to how other platforms such as keystone and bcm7445 pass there syscon offsets via DT. This patch breaks DT compatibility, but this platform is considered WIP, and is only used by a few developers who are upstreaming support for it. This change has been done as a single atomic commit to ensure it is bisectable. Signed-off-by: NPeter Griffin <peter.griffin@linaro.org> Reviewed-by: NArnd Bergmann <arnd@arndb.de> Acked-by: NMaxime Coquelin <maxime.coquelin@st.com> Tested-by: NMaxime Coquelin <maxime.coquelin@st.com>
-
由 Javier Martinez Canillas 提交于
Some WLAN chips attached to a SDIO interface, need an external clock to be operational. Since this is very common, extend the simple MMC power sequence DT binding to support an optional clock. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Javier Martinez Canillas 提交于
Many SDIO/MMC attached WLAN chips need more than one ping for their reset sequence. Extend the pwrseq_simple binding to support more than one pin. Signed-off-by: NJavier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Sylwester Nawrocki 提交于
After the Exynos Power Management Unit (PMU) driver was converted to the platform device driver in commit 14fc8b93 ("ARM: EXYNOS: Add platform driver support for Exynos PMU") and then PMU device nodes added to Exynos4 DTs in commit 7b9613ac ("ARM: dts: add PMU syscon node for exynos4") the mipi video phy driver started failing probing, due to overlapping memory mapped register region resources. Now all the Exynos peripheral devices which have registers in the PMU region are supposed to use the regmap provided by the syscon driver. So support for regmap is added in this patch, this unfortunately creates yet another indirection into that supposedly trivial driver. The additional mutex is required because single register is used by PHY pairs (they share bit in a register). An improvement here could be to allow a PHY instance be created with a driver custom mutex, which would then be common for each PHY pair. This would eliminate one of 3 mutexes which need to be taken in the phy_power_on/ phy_power_off code path. However, I tried to keep this bug fix patch possibly simple. This change is needed to make MIPI DSI displays and MIPI CSI-2 camera sensors working again on Exynos4 boards. Cc: Pankaj Dubey <pankaj.dubey@samsung.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Yunzhi Li 提交于
This patch adds a binding that describes the Rockchip usb PHYs found on Rockchip SoCs usb interface. Signed-off-by: NYunzhi Li <lyz@rock-chips.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Chanwoo Choi 提交于
This patch adds the documentation for Exynos PPMU (Platform Performance Monitoring Unit) devfreq-event driver. Cc: MyungJoo Ham <myungjoo.ham@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com> Signed-off-by: NMyungJoo Ham <myungjoo.ham@samsung.com>
-
由 Emil Medve 提交于
This supports SoC(s) with multiple B/QMan instances Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Emil Medve 提交于
'ranges' are specified as <base size> not as <start end> Signed-off-by: NEmil Medve <Emilian.Medve@Freescale.com> Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Shaohui Xie 提交于
This binding is for FMan MDIO, it covers FMan v2 & FMan v3. Signed-off-by: NShaohui Xie <Shaohui.Xie@freescale.com> [scottwood@freescale.com: mark interrupts required only for external] Signed-off-by: NScott Wood <scottwood@freescale.com>
-
由 Jacek Anaszewski 提交于
Add a property for defining device outputs the LED represented by the DT child node is connected to. Signed-off-by: NJacek Anaszewski <j.anaszewski@samsung.com> Acked-by: NKyungmin Park <kyungmin.park@samsung.com> Cc: Bryan Wu <cooloney@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: devicetree@vger.kernel.org Acked-by: NPavel Machek <pavel@ucw.cz> Acked-by: NRob Herring <robh@kernel.org> Signed-off-by: NBryan Wu <cooloney@gmail.com>
-
由 Hans de Goede 提交于
Add support for the larger fifo found on sun5i and sun6i, having a separate compatible for the ir found on sun5i & sun6i also is useful if we ever want to add ir transmit support, because the sun5i & sun6i version do not have transmit support. Note this commits also adds checking for the end-of-packet interrupt flag (which was already enabled), as the fifo-data-available interrupt flag only gets set when the trigger-level is exceeded. So far we've been getting away with not doing this because of the low trigger-level, but this is something which we should have done since day one. Signed-off-by: NHans de Goede <hdegoede@redhat.com> Acked-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com> Acked-by: NMaxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@osg.samsung.com>
-