- 25 3月, 2015 1 次提交
-
-
由 Heiko Carstens 提交于
After a suspend/resume cycle we missed to enable smt again, which leads to all sorts of bugs, since the kernel assumes smt is enabled, while the hardware thinks it is not. Reported-and-tested-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Reported-by: NStefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 13 3月, 2015 4 次提交
-
-
由 Martin Schwidefsky 提交于
For compat tasks the mmap randomization does not use the maximum randomization value from mmap_rnd_mask but the fixed value of 0x7ff. This needs to be respected in the definition of STACK_RND_MASK as well. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Heiko Carstens 提交于
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Hendrik Brueckner 提交于
The SF_CYCLES_BASIC_DIAG is always registered even if it is turned of in the current hardware configuration. Because diagnostic-sampling is typically not turned on in the hardware configuration, do not register this perf event by default. Enable it only if the diagnostic-sampling function is authorized. Signed-off-by: NHendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Chen Gang 提交于
When !MMU, asm-generic will not define default pgprot_writecombine, so c6x needs to define it by itself. The related error: CC [M] fs/pstore/ram_core.o fs/pstore/ram_core.c: In function 'persistent_ram_vmap': fs/pstore/ram_core.c:399:10: error: implicit declaration of function 'pgprot_writecombine' [-Werror=implicit-function-declaration] prot = pgprot_writecombine(PAGE_KERNEL); ^ fs/pstore/ram_core.c:399:8: error: incompatible types when assigning to type 'pgprot_t {aka struct <anonymous>}' from type 'int' prot = pgprot_writecombine(PAGE_KERNEL); ^ Signed-off-by: NChen Gang <gang.chen.5i5j@gmail.com> Cc: Mark Salter <msalter@redhat.com> Cc: Aurelien Jacquiot <a-jacquiot@ti.com> Cc: "Kirill A. Shutemov" <kirill@shutemov.name> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 3月, 2015 1 次提交
-
-
由 Chung-Ling Tang 提交于
Remove struct pt_regs from user header and use generic ucontext.h. Signed-off-by: NChung-Ling Tang <cltang@codesourcery.com> Acked-by: NLey Foon Tan <lftan@altera.com>
-
- 06 3月, 2015 3 次提交
-
-
由 Laura Abbott 提交于
The set_memory_* functions currently only support module addresses. The addresses are validated using is_module_addr. That function is special though and relies on internal state in the module subsystem to work properly. At the time of module initialization and calling set_memory_*, it's too early for is_module_addr to work properly so it always returns false. Rather than be subject to the whims of the module state, just bounds check against the module virtual address range. Signed-off-by: NLaura Abbott <lauraa@codeaurora.org> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Quentin Casasnovas 提交于
Commit: f31a9f7c ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area") introduced alternative instructions for XSAVES/XRSTORS and commit: adb9d526 ("x86/xsaves: Add xsaves and xrstors support for booting time") added support for the XSAVES/XRSTORS instructions at boot time. Unfortunately both failed to properly protect them against faulting: The 'xstate_fault' macro will use the closest label named '1' backward and that ends up in the .altinstr_replacement section rather than in .text. This means that the kernel will never find in the __ex_table the .text address where this instruction might fault, leading to serious problems if userspace manages to trigger the fault. Signed-off-by: NQuentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by: NJamie Iles <jamie.iles@oracle.com> [ Improved the changelog, fixed some whitespace noise. ] Acked-by: NBorislav Petkov <bp@alien8.de> Acked-by: NLinus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Cc: Allan Xavier <mr.a.xavier@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: adb9d526 ("x86/xsaves: Add xsaves and xrstors support for booting time") Fixes: f31a9f7c ("x86/xsaves: Use xsaves/xrstors to save and restore xsave area") Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Andy Shevchenko 提交于
The commit 8bbc2a13 ("x86/intel/quark: Add Intel Quark platform support") introduced a minimal support of Intel Quark SoC. That allows to use core parts of the SoC. However, the SPI, I2C, and GPIO drivers can't be selected by kernel configuration because they depend on COMMON_CLK. The patch adds a COMMON_CLK selection to the platfrom definition to allow user choose the drivers. Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: NOng, Boon Leong <boon.leong.ong@intel.com> Cc: Bryan O'Donoghue <pure.logic@nexus-software.ie> Cc: Darren Hart <dvhart@linux.intel.com> Fixes: 8bbc2a13 ("x86/intel/quark: Add Intel Quark platform support") Link: http://lkml.kernel.org/r/1425569044-2867-1-git-send-email-andriy.shevchenko@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 05 3月, 2015 3 次提交
-
-
由 Arnd Bergmann 提交于
I recently did a rework of the smc91x driver and did some build-testing by compiling hundreds of randconfig kernels. Unfortunately, my script was wrong and did not actually test the configurations that mattered, so I introduced stupid typos in almost every file I touched. I fixed my script now, built all configurations that actually matter and fixed all the typos, this is the result. Signed-off-by: NArnd Bergmann <arnd@arndb.de> Fixes: b70661c7 ("net: smc91x: use run-time configuration on all ARM machines") Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Andy Lutomirski 提交于
'ret_from_fork' checks TIF_IA32 to determine whether 'pt_regs' and the related state make sense for 'ret_from_sys_call'. This is entirely the wrong check. TS_COMPAT would make a little more sense, but there's really no point in keeping this optimization at all. This fixes a return to the wrong user CS if we came from int 0x80 in a 64-bit task. Signed-off-by: NAndy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/4710be56d76ef994ddf59087aad98c000fbab9a4.1424989793.git.luto@amacapital.net [ Backported from tip:x86/asm. ] Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Iyappan Subramanian 提交于
This patch fixes the backward compatibility of the older driver with the newer firmware by making the binding unique so that the older driver won't recognize the non-supported interfaces. The new bindings are in sync with the newer firmware. Signed-off-by: NIyappan Subramanian <isubramanian@apm.com> Signed-off-by: NKeyur Chudgar <kchudgar@apm.com> Tested-by: NMark Langsdorf <mlangsdo@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 3月, 2015 9 次提交
-
-
由 Jamie Garside 提交于
This patch fixes two bugs in the Microblaze syscall trap handler when an invalid syscall ID is used. First, the range check on line 351 only checks for syscall IDs greater than __NR_syscalls. A negative syscall ID (either passed to `syscall()` or as returned by `do_syscall_trace_enter()` on error) will still satisfy this test and cause the Linux kernel to access an invalid memory location and cause a kernel oops. This has been fixed by also checking for r12 < 0. Secondly, the current error recovery at line 378 returns using the wrong register (r15 instead of r14) and does not restore the previous stack state. This has been fixed by invoking `ret_from_trap` on error, setting r3 to `-ENOSYS`, similar to what would happen when calling a valid syscall. Signed-off-by: NJamie Garside <jamie.garside@york.ac.uk> Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Michal Simek 提交于
No function change. Signed-off-by: NMichal Simek <michal.simek@xilinx.com>
-
由 Jiang Liu 提交于
When parsing resources for PCI host bridge, we should ignore resources consumed by host bridge itself and only report window resources available to child PCI busses. Fixes: 593669c2 (x86/PCI/ACPI: Use common ACPI resource interfaces ...) Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com> Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
-
由 Michael Mueller 提交于
With patch "include guest facilities in kvm facility test" it is no longer necessary to have special handling for the non-LPAR case. Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Michael Mueller 提交于
Most facility related decisions in KVM have to take into account: - the facilities offered by the underlying run container (LPAR/VM) - the facilities supported by the KVM code itself - the facilities requested by a guest VM This patch adds the KVM driver requested facilities to the test routine. It additionally renames struct s390_model_fac to kvm_s390_fac and its field names to be more meaningful. The semantics of the facilities stored in the KVM architecture structure is changed. The address arch.model.fac->list now points to the guest facility list and arch.model.fac->mask points to the KVM facility mask. This patch fixes the behaviour of KVM for some facilities for guests that ignore the guest visible facility bits, e.g. guests could use transactional memory intructions on hosts supporting them even if the chosen cpu model would not offer them. The userspace interface is not affected by this change. Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Michael Mueller 提交于
The facility lists were not fully copied. Signed-off-by: NMichael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Christian Borntraeger 提交于
Under z/VM PQAP might trigger an operation exception if no crypto cards are defined via APVIRTUAL or APDEDICATED. [ 386.098666] Kernel BUG at 0000000000135c56 [verbose debug info unavailable] [ 386.098693] illegal operation: 0001 ilc:2 [#1] SMP [...] [ 386.098751] Krnl PSW : 0704c00180000000 0000000000135c56 (kvm_s390_apxa_installed+0x46/0x98) [...] [ 386.098804] [<000000000013627c>] kvm_arch_init_vm+0x29c/0x358 [ 386.098806] [<000000000012d008>] kvm_dev_ioctl+0xc0/0x460 [ 386.098809] [<00000000002c639a>] do_vfs_ioctl+0x332/0x508 [ 386.098811] [<00000000002c660e>] SyS_ioctl+0x9e/0xb0 [ 386.098814] [<000000000070476a>] system_call+0xd6/0x258 [ 386.098815] [<000003fffc7400a2>] 0x3fffc7400a2 Lets add an extable entry and provide a zeroed config in that case. Reported-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: NThomas Huth <thuth@linux.vnet.ibm.com> Tested-by: NStefan Zimmermann <stzi@linux.vnet.ibm.com>
-
由 Nishanth Aravamudan 提交于
After d905c5df ("PPC: POWERNV: move iommu_add_device earlier"), the refcnt on the kobject backing the IOMMU group for a PCI device is elevated by each call to pci_dma_dev_setup_pSeriesLP() (via set_iommu_table_base_and_group). When we go to dlpar a multi-function PCI device out: iommu_reconfig_notifier -> iommu_free_table -> iommu_group_put BUG_ON(tbl->it_group) We trip this BUG_ON, because there are still references on the table, so it is not freed. Fix this by moving the powernv bus notifier to common code and calling it for both powernv and pseries. Fixes: d905c5df ("PPC: POWERNV: move iommu_add_device earlier") Signed-off-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Tested-by: NNishanth Aravamudan <nacc@linux.vnet.ibm.com> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
由 Michael Ellerman 提交于
Anton has a busy ppc64le KVM box where guests sometimes hit the infamous "kernel BUG at kernel/smpboot.c:134!" issue during boot: BUG_ON(td->cpu != smp_processor_id()); Basically a per CPU hotplug thread scheduled on the wrong CPU. The oops output confirms it: CPU: 0 Comm: watchdog/130 The problem is that we aren't ensuring the CPU active bit is set for the secondary before allowing the master to continue on. The master unparks the secondary CPU's kthreads and the scheduler looks for a CPU to run on. It calls select_task_rq() and realises the suggested CPU is not in the cpus_allowed mask. It then ends up in select_fallback_rq(), and since the active bit isnt't set we choose some other CPU to run on. This seems to have been introduced by 6acbfb96 "sched: Fix hotplug vs. set_cpus_allowed_ptr()", which changed from setting active before online to setting active after online. However that was in turn fixing a bug where other code assumed an active CPU was also online, so we can't just revert that fix. The simplest fix is just to spin waiting for both active & online to be set. We already have a barrier prior to set_cpu_online() (which also sets active), to ensure all other setup is completed before online & active are set. Fixes: 6acbfb96 ("sched: Fix hotplug vs. set_cpus_allowed_ptr()") Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au> Signed-off-by: NAnton Blanchard <anton@samba.org> Signed-off-by: NMichael Ellerman <mpe@ellerman.id.au>
-
- 03 3月, 2015 6 次提交
-
-
由 Tony Krowiak 提交于
z/VM and LPAR enable key wrapping by default, lets do the same on KVM. Signed-off-by: NTony Krowiak <akrowiak@linux.vnet.ibm.com> Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com>
-
由 Tapasweni Pathak 提交于
Enable disabled interrupt, on unsuccessful operation. Found by Coccinelle. Signed-off-by: NTapasweni Pathak <tapaswenipathak@gmail.com> Acked-by: NJulia Lawall <julia.lawall@lip6.fr> Reviewed-by: NJames Hogan <james.hogan@imgtec.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 James Hogan 提交于
Currently the guest exit trace event saves the VCPU pointer to the structure, and the guest PC is retrieved by dereferencing it when the event is printed rather than directly from the trace record. This isn't safe as the printing may occur long afterwards, after the PC has changed and potentially after the VCPU has been freed. Usually this results in the same (wrong) PC being printed for multiple trace events. It also isn't portable as userland has no way to access the VCPU data structure when interpreting the trace record itself. Lets save the actual PC in the structure so that the correct value is accessible later. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by: NJames Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Cc: <stable@vger.kernel.org> # v3.10+ Acked-by: NSteven Rostedt <rostedt@goodmis.org> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Radim Krčmář 提交于
In commit b4eef9b3, we started to use hwapic_isr_update() != NULL instead of kvm_apic_vid_enabled(vcpu->kvm). This didn't work because SVM had it defined and "apicv" path in apic_{set,clear}_isr() does not change apic->isr_count, because it should always be 1. The initial value of apic->isr_count was based on kvm_apic_vid_enabled(vcpu->kvm), which is always 0 for SVM, so KVM could have injected interrupts when it shouldn't. Fix it by implicitly setting SVM's hwapic_isr_update to NULL and make the initial isr_count depend on hwapic_isr_update() for good measure. Fixes: b4eef9b3 ("kvm: x86: vmx: NULL out hwapic_isr_update() in case of !enable_apicv") Reported-and-tested-by: NBorislav Petkov <bp@suse.de> Signed-off-by: NRadim Krčmář <rkrcmar@redhat.com> Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>
-
由 Martin Schwidefsky 提交于
The switch_mm function does nothing in case the prev and next mm are the same. It can happen that a crst_table_downgrade has changed the top-level pgd in the meantime on a different CPU. Always store the new ASCE to be picked up in entry.S. [heiko.carstens@de.ibm.com]: Bug was introduced with git commit 53e857f3 ("s390/mm,tlb: race of lazy TLB flush vs. recreation of TLB entries") and causes random crashes due to broken page tables being used. Reported-by: NDominik Vogt <vogt@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
-
由 Heiko Carstens 提交于
With git commit 4d92f502 ("s390: reintroduce diag 44 calls for cpu_relax()") I reintroduced a non-trivial cpu_relax() variant on s390. The difference to the previous variant however is that the new version is an out-of-line function, which will be traced if function tracing is enabled. Switching to different tracers includes instruction patching. Therefore this is done within stop_machine() "context" to prevent that any function tracing is going on while instructions are being patched. With the new out-of-line variant of cpu_relax() this is not true anymore, since cpu_relax() gets called in a busy loop by all waiting cpus within stop_machine() until function patching is finished. Therefore cpu_relax() must be marked notrace. This fixes kernel crashes when frequently switching between "function" and "function_graph" tracers. Moving cpu_relax() to a header file again, doesn't work because of header include order dependencies. Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 01 3月, 2015 2 次提交
-
-
由 Kirill A. Shutemov 提交于
Core mm expects __PAGETABLE_{PUD,PMD}_FOLDED to be defined if these page table levels folded. Usually, these defines are provided by <asm-generic/pgtable-nopmd.h> and <asm-generic/pgtable-nopud.h>. But some architectures fold page table levels in a custom way. They need to define these macros themself. This patch adds missing defines. The patch fixes mm->nr_pmds underflow and eliminates dead __pmd_alloc() and __pud_alloc() on architectures without these page table levels. Signed-off-by: NKirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: David Howells <dhowells@redhat.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <jejb@parisc-linux.org> Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Arnd Bergmann 提交于
The smc91x driver traditionally gets configured at compile-time for whichever hardware it runs on. This no longer works on ARM as we continue to move to building all-in-one kernels. Most ARM configurations with this driver already use run-time configuration through DT or through platform_data, but a few have not been converted yet. I've checked all ARM boards that use this driver in their legacy board files, and converted the ones that were using compile-time configuration in smc91x.h to behave like the other ones and provide the interrupt polarity along with the MMIO configuration (width, stride) at platform device creation time. In particular, these combinations were previously selectable in Kconfig but in fact broken: - sa1100 assabet plus pleb - msm combined with any other armv6/v7 platform - pxa-idp combined with any non-DMA pxa variant - LogicPD PXA270 combined with any other pxa - nomadik combined with any other armv4/v5 platform, e.g. versatile. None of these seem critical enough to warrant a backport to stable, but it would be nice to clean this up for good. Signed-off-by: NArnd Bergmann <arnd@arndb.de> ---- I would like the patch to get merged through netdev, after Robert and/or Linus have verified it on at least some hardware. There are a few other non-ARM platforms using this driver, I could do the same patch for those if we want to take it further. arch/arm/mach-msm/board-halibut.c | 8 ++++- arch/arm/mach-msm/board-qsd8x50.c | 8 ++++- arch/arm/mach-pxa/idp.c | 5 +++ arch/arm/mach-pxa/lpd270.c | 8 ++++- arch/arm/mach-realview/core.c | 7 ++++ arch/arm/mach-realview/realview_eb.c | 2 +- arch/arm/mach-sa1100/neponset.c | 6 ++++ arch/arm/mach-sa1100/pleb.c | 7 ++++ drivers/net/ethernet/smsc/smc91x.c | 9 +++-- drivers/net/ethernet/smsc/smc91x.h | 114 ++---------------------------------------------------------- 10 files changed, 57 insertions(+), 117 deletions(-) Tested-by: NRobert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 28 2月, 2015 6 次提交
-
-
由 Steven Rostedt 提交于
Commit: 1e02ce4c ("x86: Store a per-cpu shadow copy of CR4") added a shadow CR4 such that reads and writes that do not modify the CR4 execute much faster than always reading the register itself. The change modified cpu_init() in common.c, so that the shadow CR4 gets initialized before anything uses it. Unfortunately, there's two cpu_init()s in common.c. There's one for 64-bit and one for 32-bit. The commit only added the shadow init to the 64-bit path, but the 32-bit path needs the init too. Link: http://lkml.kernel.org/r/20150227125208.71c36402@gandalf.local.home Fixes: 1e02ce4c "x86: Store a per-cpu shadow copy of CR4" Signed-off-by: NSteven Rostedt <rostedt@goodmis.org> Acked-by: NAndy Lutomirski <luto@amacapital.net> Cc: Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/20150227145019.2bdd4354@gandalf.local.homeSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Lorenzo Pieralisi 提交于
ARM64 CPUidle driver requires the cpu_do_idle function so that it can be used to enter the shallowest idle state, and it is declared in asm/proc-fns.h. The current ARM64 CPUidle driver does not include asm/proc-fns.h explicitly and it has so far relied on implicit inclusion from other header files. Owing to some header dependencies reshuffling this currently triggers build failures when CONFIG_ARM64_64K_PAGES=y: drivers/cpuidle/cpuidle-arm64.c: In function "arm64_enter_idle_state" drivers/cpuidle/cpuidle-arm64.c:42:3: error: implicit declaration of function "cpu_do_idle" [-Werror=implicit-function-declaration] cpu_do_idle(); ^ This patch adds the explicit inclusion of the asm/proc-fns.h header file in the arm64 asm/cpuidle.h header file, so that the build breakage is fixed and the required header inclusion is added to the appropriate arch back-end CPUidle header, already included by the CPUidle arm64 driver, where CPUidle arch related function declarations belong. Reported-by: NLaura Abbott <lauraa@codeaurora.org> Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: NWill Deacon <will.deacon@arm.com> Tested-by: NMark Rutland <mark.rutland@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
The native (64-bit) sigval_t union contains sival_int (32-bit) and sival_ptr (64-bit). When a compat application invokes a syscall that takes a sigval_t value (as part of a larger structure, e.g. compat_sys_mq_notify, compat_sys_timer_create), the compat_sigval_t union is converted to the native sigval_t with sival_int overlapping with either the least or the most significant half of sival_ptr, depending on endianness. When the corresponding signal is delivered to a compat application, on big endian the current (compat_uptr_t)sival_ptr cast always returns 0 since sival_int corresponds to the top part of sival_ptr. This patch fixes copy_siginfo_to_user32() so that sival_int is copied to the compat_siginfo_t structure. Cc: <stable@vger.kernel.org> Reported-by: NBamvor Jian Zhang <bamvor.zhangjian@huawei.com> Tested-by: NBamvor Jian Zhang <bamvor.zhangjian@huawei.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Catalin Marinas 提交于
With commit 3690951f (arm64: Use swiotlb late initialisation), the swiotlb buffer size is limited to MAX_ORDER_NR_PAGES. However, there are platforms with 32-bit only devices that require bounce buffering via swiotlb. This patch changes the swiotlb initialisation to an early 64MB memblock allocation. In order to get the swiotlb buffer correctly allocated (via memblock_virt_alloc_low_nopanic), this patch also defines ARCH_LOW_ADDRESS_LIMIT to the maximum physical address capable of 32-bit DMA. Reported-by: NKefeng Wang <wangkefeng.wang@huawei.com> Tested-by: NKefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-
由 Sebastian Ott 提交于
Since commit 8cfc99b5 ("s390: add pci_iomap_range") we use EXPORT_SYMBOL for pci_iomap but EXPORT_SYMBOL_GPL for pci_iounmap. Change the related functions to use EXPORT_SYMBOL like the asm-generic variants do. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
由 Sebastian Ott 提交于
Commit 8cfc99b5 ("s390: add pci_iomap_range") introduced counters to keep track of the number of mappings created. This revealed that we don't have our internal mappings in order when using hotunplug or resume from hibernate. This patch addresses both issues. Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 2月, 2015 5 次提交
-
-
由 Vineet Gupta 提交于
The old implementation assumed that SP at the time of __switch_to() is right above pt_regs which is almost certainly not the case as there will be some stack build up between entry into kernel and leading up to __switch_to Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
/proc/<pid>/maps currently don't annotate stack vma with "[stack]" This is because KSTK_ESP ie expected to return usermode SP of tsk while currently it returns the kernel mode SP of a sleeping tsk. While the fix is trivial, we also need to adjust the ARC kernel stack unwinder to not use KSTK_SP and friends any more. Cc: <stable@vger.kernel.org> Reported-and-suggested-by: NAlexey Brodkin <abrodkin@synopsys.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Vineet Gupta 提交于
The arc unwinder can also be used for perf callchains. Signed-off-by: NMischa Jonker <mjonker@synopsys.com> Signed-off-by: NVineet Gupta <vgupta@synopsys.com>
-
由 Marc Zyngier 提交于
Patch 2f896d58 ("arm64: use fixmap for text patching") changed the way we patch the kernel text, using a fixmap when the kernel or modules are flagged as read only. Unfortunately, a flaw in the logic makes it fall over when patching modules without CONFIG_DEBUG_SET_MODULE_RONX enabled: [...] [ 32.032636] Call trace: [ 32.032716] [<fffffe00003da0dc>] __copy_to_user+0x2c/0x60 [ 32.032837] [<fffffe0000099f08>] __aarch64_insn_write+0x94/0xf8 [ 32.033027] [<fffffe000009a0a0>] aarch64_insn_patch_text_nosync+0x18/0x58 [ 32.033200] [<fffffe000009c3ec>] ftrace_modify_code+0x58/0x84 [ 32.033363] [<fffffe000009c4e4>] ftrace_make_nop+0x3c/0x58 [ 32.033532] [<fffffe0000164420>] ftrace_process_locs+0x3d0/0x5c8 [ 32.033709] [<fffffe00001661cc>] ftrace_module_init+0x28/0x34 [ 32.033882] [<fffffe0000135148>] load_module+0xbb8/0xfc4 [ 32.034044] [<fffffe0000135714>] SyS_finit_module+0x94/0xc4 [...] This is triggered by the use of virt_to_page() on a module address, which ends to pointing to Nowhereland if you're lucky, or corrupt your precious data if not. This patch fixes the logic by mimicking what is done on arm: - If we're patching a module and CONFIG_DEBUG_SET_MODULE_RONX is set, use vmalloc_to_page(). - If we're patching the kernel and CONFIG_DEBUG_RODATA is set, use virt_to_page(). - Otherwise, use the provided address, as we can write to it directly. Tested on 4.0-rc1 as a KVM guest. Reported-by: NRichard W.M. Jones <rjones@redhat.com> Reviewed-by: NKees Cook <keescook@chromium.org> Acked-by: NMark Rutland <mark.rutland@arm.com> Acked-by: NLaura Abbott <lauraa@codeaurora.org> Tested-by: NRichard W.M. Jones <rjones@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NCatalin Marinas <catalin.marinas@arm.com>
-