- 08 11月, 2007 8 次提交
-
-
由 Stephen Rothwell 提交于
ppc_md.init_IRQ is not called if it is NULL, so we don't need an empty routine in the non PCI case. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Bugfix: avoid crash if there's no PCI device for a given openfirmware node. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Bugfix: if a driver controlling one part of a multi-function PCI card has asked for a reset, honor that request above all others. Signed-off-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linas Vepstas 提交于
Clean up commentary, remove dead code. Signed-off-by Linas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Tony Breeds 提交于
Without this patch I get the following build failure CC arch/powerpc/platforms/celleb/setup.o arch/powerpc/platforms/celleb/setup.c:151: error: 'generic_calibrate_decr' undeclared here (not in a function) Signed-off-by: NTony Breeds <tony@bakeyournoodle.com> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 will schmidt 提交于
This fixes the error error: implicit declaration of function "udbg_printf" We have a few spots where we reference udbg_printf() without #including udbg.h. These are within #ifdef DEBUG blocks, so unnoticed until we do a #define DEBUG or #define DEBUG_LOW nearby. Signed-off-by: NWill Schmidt <will_schmidt@vnet.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olof Johansson 提交于
Fix two build errors on powerpc allyesconfig + CONFIG_SMP=n: arch/powerpc/platforms/built-in.o: In function `cpu_affinity_set': arch/powerpc/platforms/cell/spu_priv1_mmio.c:78: undefined reference to `.iic_get_target_id' arch/powerpc/platforms/built-in.o: In function `iic_init_IRQ': arch/powerpc/platforms/cell/interrupt.c:397: undefined reference to `.iic_setup_cpu' Signed-off-by: NOlof Johansson <olof@lixom.net> Acked-by: NArnd Bergmann <arnd.bergmann@de.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
There are plans afoot to use pci_restore_msi_state() to restore MSI state after a device reset. In order for this to work for the RTAS MSI backend, we need to read back the MSI message from config space after it has been setup by firmware. This should be sufficient for restoring the MSI state after a device reset, however we will need to revisit this for suspend to disk if that is ever implemented on pseries. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Acked-by: NLinas Vepstas <linas@austin.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 23 10月, 2007 1 次提交
-
-
由 Jens Axboe 提交于
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
- 22 10月, 2007 3 次提交
-
-
由 Marian Balakowicz 提交于
Use the watchdog timer to implement board restart support. Signed-off-by: NMarian Balakowicz <m8@semihalf.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Marian Balakowicz 提交于
Add common helper routines: mpc52xx_map_wdt() and mpc52xx_restart(). Signed-off-by: NMarian Balakowicz <m8@semihalf.com> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Marian Balakowicz 提交于
Add helper routine mpc52xx_find_and_map_path(). Extract common code to mpc52xx_map_node() and refactor mpc52xx_find_and_map(). Signed-off-by: NJan Wrobel <wrr@semihalf.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
- 20 10月, 2007 10 次提交
-
-
由 Matt LaPlante 提交于
Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: NMatt LaPlante <kernel1@cyberdogtech.com> Acked-by: NRandy Dunlap <randy.dunlap@oracle.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Jan Engelhardt 提交于
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Josh Boyer 提交于
Fix some device tree omissions that prevented the new EMAC driver from setting up ethernet on the Bamboo board correctly and update the Bamboo defconfig. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Josh Boyer 提交于
This patch enables the ibm_newemac driver for the Walnut board. It fixes the device tree for the walnut board to order the MAL interrupts correctly and adds the local-mac-address property to the EMAC node. The bootwrapper is also updated to extract the MAC address from the OpenBIOS offset where it is stored. Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
Currently there's no way to enable early boot console on PowerPC 44x not specifying uart's physical address in kernel config, which is used for very early debug messages. This patch splits very early debug output (which needs uart physical address in kernel config) and early boot console (which searches for uarts in the device tree using find_legacy_serial_ports). We enable early boot console for all 44x processors, while (dangerous) early debug is user-selectable. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
This patch enables NEW EMAC support for PowerPC 440EPx Sequoia board. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Valentine Barshak 提交于
This adds RGMII support to Sequoia DTS and sets correct phy-mode for EMACs. According to Sequoia datasheet, both ethernet ports are connected to RGMII interface, while ZMII is used only for MDIO. Signed-off-by: NValentine Barshak <vbarshak@ru.mvista.com> Signed-off-by: NJosh Boyer <jwboyer@linux.vnet.ibm.com>
-
由 Robert P. J. Day 提交于
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAdrian Bunk <bunk@kernel.org>
-
由 Jiri Slaby 提交于
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Serge E. Hallyn 提交于
is_init() is an ambiguous name for the pid==1 check. Split it into is_global_init() and is_container_init(). A cgroup init has it's tsk->pid == 1. A global init also has it's tsk->pid == 1 and it's active pid namespace is the init_pid_ns. But rather than check the active pid namespace, compare the task structure with 'init_pid_ns.child_reaper', which is initialized during boot to the /sbin/init process and never changes. Changelog: 2.6.22-rc4-mm2-pidns1: - Use 'init_pid_ns.child_reaper' to determine if a given task is the global init (/sbin/init) process. This would improve performance and remove dependence on the task_pid(). 2.6.21-mm2-pidns2: - [Sukadev Bhattiprolu] Changed is_container_init() calls in {powerpc, ppc,avr32}/traps.c for the _exception() call to is_global_init(). This way, we kill only the cgroup if the cgroup's init has a bug rather than force a kernel panic. [akpm@linux-foundation.org: fix comment] [sukadev@us.ibm.com: Use is_global_init() in arch/m32r/mm/fault.c] [bunk@stusta.de: kernel/pid.c: remove unused exports] [sukadev@us.ibm.com: Fix capability.c to work with threaded init] Signed-off-by: NSerge E. Hallyn <serue@us.ibm.com> Signed-off-by: NSukadev Bhattiprolu <sukadev@us.ibm.com> Acked-by: NPavel Emelianov <xemul@openvz.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Cedric Le Goater <clg@fr.ibm.com> Cc: Dave Hansen <haveblue@us.ibm.com> Cc: Herbert Poetzel <herbert@13thfloor.at> Cc: Kirill Korotaev <dev@sw.ru> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 19 10月, 2007 3 次提交
-
-
由 Rafael J. Wysocki 提交于
There is no reason why the .prepare() and .finish() methods in 'struct platform_suspend_ops' should take any arguments, since architectures don't use these methods' argument in any practically meaningful way (ie. either the target system sleep state is conveyed to the platform by .set_target(), or there is only one suspend state supported and it is indicated to the PM core by .valid(), or .prepare() and .finish() aren't defined at all). There also is no reason why .finish() should return any result. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
The name of 'struct pm_ops' suggests that it is related to the power management in general, but in fact it is only related to suspend. Moreover, its name should indicate what this structure is used for, so it seems reasonable to change it to 'struct platform_suspend_ops'. In that case, the name of the global variable of this type used by the PM core and the names of related functions should be changed accordingly. Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Rafael J. Wysocki 提交于
Move the definition of 'struct pm_ops' and related functions from <linux/pm.h> to <linux/suspend.h> . There are, at least, the following reasons to do that: * 'struct pm_ops' is specifically related to suspend and not to the power management in general. * As long as 'struct pm_ops' is defined in <linux/pm.h>, any modification of it causes the entire kernel to be recompiled, which is unnecessary and annoying. * Some suspend-related features are already defined in <linux/suspend.h>, so it is logical to move the definition of 'struct pm_ops' into there. * 'struct hibernation_ops', being the hibernation-related counterpart of 'struct pm_ops', is defined in <linux/suspend.h> . Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Acked-by: NPavel Machek <pavel@ucw.cz> Cc: Len Brown <lenb@kernel.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 17 10月, 2007 7 次提交
-
-
由 Olof Johansson 提交于
Driver for the CompactFlash slot on the PA Semi Electra eval board. It's a simple device sitting on localbus, with interrupts and detect/voltage control over GPIO. The driver is implemented as an of_platform driver, and adds localbus as a bus being probed by the of_platform framework. [akpm@linux-foundation.org: cleanups] [olof@lixom.net: fix build] Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Christoph Hellwig <hch@infradead.org> Cc: Milton Miller <miltonm@bga.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: NOlof Johansson <olof@lixom.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Christoph Lameter 提交于
Slab constructors currently have a flags parameter that is never used. And the order of the arguments is opposite to other slab functions. The object pointer is placed before the kmem_cache pointer. Convert ctor(void *object, struct kmem_cache *s, unsigned long flags) to ctor(struct kmem_cache *s, void *object) throughout the kernel [akpm@linux-foundation.org: coupla fixes] Signed-off-by: NChristoph Lameter <clameter@sgi.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stephen Rothwell 提交于
Commit 1189be65 ([POWERPC] Use 1TB segments) added an argument to hpte_insert. Also make iSeries_hpte_insert static. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Stephen Rothwell 提交于
It seems to have been munged by patchwork. Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Sylvain Munaut 提交于
This patch adds support for the core of the BestComm API for the Freescale MPC5200(b). The BestComm engine is a microcode-controlled / tasks-based DMA used by several of the onchip devices. Setting up the tasks / memory allocation and all common low level functions are handled by this patch. The specifics details of each tasks and their microcode are split-out in separate patches. This is not the official API, but a much cleaner one. (hopefully) Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Sylvain Munaut 提交于
Instead of having in the makefile all the option that requires rheap, we define a configuration symbol and when needed we make sure it's selected. Signed-off-by: NSylvain Munaut <tnt@246tNt.com> Signed-off-by: NGrant Likely <grant.likely@secretlab.ca>
-
由 Mike Travis 提交于
Convert cpu_sibling_map from a static array sized by NR_CPUS to a per_cpu variable. This saves sizeof(cpumask_t) * NR unused cpus. Access is mostly from startup and CPU HOTPLUG functions. Signed-off-by: NMike Travis <travis@sgi.com> Cc: Andi Kleen <ak@suse.de> Cc: Christoph Lameter <clameter@sgi.com> Cc: "Siddha, Suresh B" <suresh.b.siddha@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 16 10月, 2007 3 次提交
-
-
由 Jens Axboe 提交于
Acked-by: NGeoff Levand <geoffrey.levand@am.sony.com> Signed-off-by: NJens Axboe <jens.axboe@oracle.com>
-
由 Michael Ellerman 提交于
msic_dcr_read() doesn't really do anything useful, just replace it with direct calls to dcr_read(). Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
由 Michael Ellerman 提交于
Now that all users of dcr_read()/dcr_write() add the dcr_host_t.base, we can save them the trouble and do it in dcr_read()/dcr_write(). As some background to why we just went through all this jiggery-pokery, benh sayeth: Initially the goal of the dcr_read/dcr_write routines was to operate like mfdcr/mtdcr which take absolute DCR numbers. The reason is that on 4xx hardware, indirect DCR access is a pain (goes through a table of instructions) and it's useful to have the compiler resolve an absolute DCR inline. We decided that wasn't worth the API bastardisation since most places where absolute DCR values are used are low level 4xx-only code which may as well continue using mfdcr/mtdcr, while the new API is designed for device "instances" that can exist on 4xx and Axon type platforms and may be located at variable DCR offsets. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NJeff Garzik <jeff@garzik.org>
-
- 15 10月, 2007 1 次提交
-
-
由 Geert Uytterhoeven 提交于
Kill unused variables Signed-off-by: NGeert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 14 10月, 2007 2 次提交
-
-
由 Grant Likely 提交于
There is no good reason for board platform code to mess with the ROOT_DEV. Remove it from all in-tree platforms except powermac This is a follow on to commit 745e1027. The original patch had this change to lite5200.c, but it got dropped in the psycho madness that is the 2.6.24 merge window. Signed-off-by: NGrant Likely <grant.likely@secretlab.ca> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 13 10月, 2007 2 次提交
-
-
由 Kay Sievers 提交于
This changes the uevent buffer functions to use a struct instead of a long list of parameters. It does no longer require the caller to do the proper buffer termination and size accounting, which is currently wrong in some places. It fixes a known bug where parts of the uevent environment are overwritten because of wrong index calculations. Many thanks to Mathieu Desnoyers for finding bugs and improving the error handling. Signed-off-by: NKay Sievers <kay.sievers@vrfy.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Adrian Bunk 提交于
Remove the following redundant and never or rarely used kconfig syntax: - "def_boolean" (same as "def_bool") - "requires" (same as "depends on") - "depends" (same as "depends on") This patch contains the code changes and Kconfig updates. The shipped files are in next patch to let actual codechange stand out. Signed-off-by: NAdrian Bunk <bunk@kernel.org> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Cc: Bryan Wu <bryan.wu@analog.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: "John W. Linville" <linville@tuxdriver.com> Cc: Roman Zippel <zippel@linux-m68k.org> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NSam Ravnborg <sam@ravnborg.org>
-