If we encounter an uncorrectable ECC error while scanning for the fastmap
UBI must not fail hard. Instead fall back to scanning mode.
Reported-by: NAlexander Block <Alexander.Block@continental-corporation.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

...instead of generic self checking.
Signed-off-by: NRichard Weinberger <richard@nod.at>

There is always exactly one ubi_attach_info object allocated,
therefore we don't have to care about the name.
Signed-off-by: NRichard Weinberger <richard@nod.at>

Currently we leak a few ubi_ainf_pebs while attaching.
Signed-off-by: NRichard Weinberger <richard@nod.at>

We are completely discarding the earlier value of 'bitflips', which
could reflect a bitflip found in ubi_io_read_vid_hdr(). Let's use the
bitwise OR of header and data 'bitflip' statuses instead.

Coverity CID #1226856

Cc: stable <stable@vger.kernel.org>
Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>

If there is more then one UBI device mounted, there is no way to
distinguish between messages from different UBI devices.
Add device number to all ubi layer message types.

The R/O block driver messages were replaced by pr_* since
ubi_device structure is not used by it.

Amended a bit by Artem.
Signed-off-by: NTanya Brokhman <tlinder@codeaurora.org>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Set the return variable to an error code as done elsewhere in the function.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
 { ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
    when != &ret
*if(...)
{
  ... when != ret = e2
      when forall
 return ret;
}

// </smpl>
Signed-off-by: NJulia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: NRichard Weinberger <richard@nod.at>

The test:
if (!a && b)
  a = b;
can be symplified in:
if (!a)
  a = b;

And there's no need to test if ubi->image_seq is not null, because if it is,
it is set to image_seq.
So, we just test if image_seq is not null.
Signed-off-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

If we find an invalid fastmap we have to scan from the very beginning.
Otherwise we leak the first 64 PEBs.
Reported-and-tested-by: NRichard Genoud <richard.genoud@gmail.com>
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

With this patch code is a bit more readable and there's no
generated code or functionality impact.
Furthermore, this abstracts implementation details and
will allow to change ubi_debug_info in a less invasive way.
Signed-off-by: NEzequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI reserves an LEB sized buffer for various needs. We can use this buffer
while scanning, instead of allocating another one. This patch was originally
created by Jan Luebbe <jlu@pengutronix.de>, but then he dropped it and I picked
up and tweaked a little bit.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

- Export compare_lebs() as fastmap needs this function.
- Implement fastmap scan logic.
Signed-off-by: NRichard Weinberger <richard@nod.at>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Signed-off-by: NBrian Norris <computersforpeace@gmail.com>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

UBI currently prints a lot of information when it mounts a volume, which
bothers some people. Make it less chatty - print only important information
by default.

Get rid of 'dbg_msg()' macro completely.
Reported-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Use 'pr_err()' instead of 'printk(KERN_ERR', etc.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Join all the split printk lines in order to stop checkpatch complaining.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Without this patch, these PEB are not scrubbed until we put data in them.
Bitflip can accumulate latter and we can loose the EC header (but VID header
should be intact and allow to recover data).
Signed-off-by: NMatthieu Castet <matthieu.castet@parrot.com>
Cc: stable@vger.kernel.org
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

This patch adds the volume id to struct ubi_ainf_peb when scanning the LEBs at
startup. PEBs now added to the erase queue will know their original LEB number
and volume id, if available, and will be -1 otherwise (for instance, if the VID
header is unreadable).

This was tested by creating an ubi device with 3 volumes and disabiling the
ubi_thread's do_work functionality. The different ubi volumes were formatted
to ubifs and had files created and erased.  The ubi modules was reloaded and
the list of LEB's added to the erased list was outputted, confirming the
volume ids and LEB numbers were appropriate.
Signed-off-by: NJoel Reardon <reardonj@inf.ethz.ch>
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Finally, rename the scan.c file. Now adding fastmap support won't look that
hacky anymore.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Rename the constant to UBI_UNKNOWN, for the same reason that we are going
to add nother attaching method and re-use the same data structures, so the
"SCAN" in the name becomes incorrect. I've also removed the "_EC" part because
Joel is going to use this constant for other fields in the attaching info data
structures.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

Rename the 'attach_by_scanning()' function to 'ubi_attach()' and move it to
scan.c. Richard will plug his fastmap stuff there.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

This patch amends commentaries in scan.[ch] to match the new logic. Reminder -
we did the restructuring to prepare the code for adding the fastmap. This patch
also renames a couple of functions - it was too difficult to separate out that
change and I decided that it is not too bad to have it in the same patch with
commentaries changes.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The old name is not logical anymore - rename it to 'aeb_slab_cache'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The old name is not logical anymore - rename it to 'ubi_destroy_ai()'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The old name is not logical anymore - rename it to 'ubi_early_get_peb()'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The old name is not logical anymore - rename it to 'ubi_remove_av()'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The old name is not logical anymore - rename it to 'ubi_find_av()'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The old name is not logical anymore - rename it to 'ubi_add_to_av()'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The 'ubi_scan_find_aeb()' function is unused and thus can be removed.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

The 'ubi_scan_erase_peb()' is used only in scan.c so can be static. Also
re-name it to 'early_erase_peb()' because we tend to use "ubi_" prefix only for
non-static fuction and also because the new name is better.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

After re-naming the 'struct ubi_scan_volume' we should adjust all variables
named 'sv' to something else, because 'sv' stands for "scanning volume".
Let's rename it to 'av' which stands for "attaching volume" which is
a bit more consistent and has the same length, which makes re-naming easy.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

After re-naming the 'struct ubi_scan_info' we should adjust all variables
named 'si' to something else, because 'si' stands for "scanning info".
Let's rename it to 'ai' which stands for "attaching info" which is
a bit more consistent and has the same length, which makes re-naming easy.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

After re-naming the 'struct ubi_scan_leb' we should adjust all variables
named 'seb' to something else, because 'seb' stands for "scanning eraseblock".
Let's rename it to 'aeb' which stands for "attaching eraseblock" which is
a bit more consistend and has the same length.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

Rename 'struct ubi_scan_info' to 'struct ubi_attach_info'. This is part
of the code re-structuring I am trying to do in order to add fastmap
in a more logical way. Fastmap can share a lot with scanning, including
the attach-time data structures, which all now have "scan" word in the
name. Let's get rid of this word.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

Rename 'struct ubi_scan_volume' to 'struct ubi_ainf_volume'. This is part
of the code re-structuring I am trying to do in order to add fastmap
in a more logical way. Fastmap can share a lot with scanning, including
the attach-time data structures, which all now have "scan" word in the
name. Let's get rid of this word and use "ainf" instead which stands
for "attach information". It has the same length as "scan" so re-naming
is trivial.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

Rename 'struct ubi_scan_leb' to 'struct ubi_ainf_leb'. This is part
of the code re-structuring I am trying to do in order to add fastmap
in a more logical way. Fastmap can share a lot with scanning, including
the attach-time data structures, which all now have "scan" word in the
name. Let's get rid of this word and use "ainf" instead which stands
for "attach information". It has the same length as "scan" so re-naming
is trivial.
Signed-off-by: NArtem Bityutskiy <Artem.Bityutskiy@linux.intel.com>

This patch removes the 'dbg_err()' macro and we now use 'ubi_err' instead.
The idea of 'dbg_err()' was to compile out some error message to make the
binary a bit smaller - but I think it was a bad idea.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

We have the "sefl-check" feature in UBI, but for historical reasons many
corresponding functions and commentaries in the code use term "paranoid check"
instead. Let's clean this up and use "self-check" everywhere.

This patch renames functions, amends messages and kills several redundant
debugging messages.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

This patch kills the UBI debugging Kconfig option completely and makes all the
debugging stuff to be always compiled-in. It was pain in the neck to maintain
this useless option because all users I am aware of have debugging enabled
anyway - how else will you diagnose errors otherwise?
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>

I am going to remove the "UBI debugging" compilation option and make the
debugging stuff to be always compiled it. This patch is a preparation
which renames 'ubi_dbg_dump_seb()' to 'ubi_dump_seb()'.
Signed-off-by: NArtem Bityutskiy <artem.bityutskiy@linux.intel.com>