- 10 2月, 2014 3 次提交
-
-
由 Vince Weaver 提交于
"perf list" listing of hardware events doesn't work on older ARM devices. The change enabling event detection: commit b41f1cec Author: Namhyung Kim <namhyung.kim@lge.com> Date: Tue Aug 27 11:41:53 2013 +0900 perf list: Skip unsupported events uses the following code in tools/perf/util/parse-events.c: struct perf_event_attr attr = { .type = type, .config = config, .disabled = 1, .exclude_kernel = 1, }; On ARM machines pre-dating the Cortex-A15 this doesn't work, as these machines don't support .exclude_kernel. So starting with 3.12 "perf list" does not report any hardware events at all on older machines (seen on Rasp-Pi, Pandaboard, Beagleboard, etc). This version of the patch makes changes suggested by Namhyung Kim to check for EACCESS and retry (instead of just dropping the exclude_kernel) so we can properly handle machines where /proc/sys/kernel/perf_event_paranoid is set to 2. Reported-by: NChad Paradis <chad.paradis@umit.maine.edu> Signed-off-by: NVince Weaver <vincent.weaver@maine.edu> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Chad Paradis <chad.paradis@umit.maine.edu> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1312301536150.28814@vincent-weaver-1.um.maine.eduSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jiri Olsa 提交于
We removed event types from data file in following commits: 6065210d perf tools: Remove event types framework completely 44b3c578 perf tools: Remove event types from perf data file We no longer need this information, because we can get it directly from tracepoints. But we still need to handle PERF_RECORD_HEADER_EVENT_TYPE event for the sake of old perf data files created in pipe mode like: $ perf.3.4 record -o - foo >perf.data $ perf.312 report -i - < perf.data Reported-by: NStephane Eranian <eranian@google.com> Signed-off-by: NJiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1391524668-12546-1-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Fix perf-probe not to add offset value twice to uprobe probe address when post processing. The tevs[i].point.address struct member is the address of symbol+offset, but current perf-probe adjusts the point.address by adding the offset. As a result, the probe address becomes symbol+offset+offset. This may cause unexpected code corruption. Urgent fix is needed. Without this fix: --- # ./perf probe -x ./perf dso__load_vmlinux+4 # ./perf probe -l probe_perf:dso__load_vmlinux (on 0x000000000006d2b8) # nm ./perf.orig | grep dso__load_vmlinux\$ 000000000046d0a0 T dso__load_vmlinux --- You can see the given offset is 3 but the actual probed address is dso__load_vmlinux+8. With this fix: --- # ./perf probe -x ./perf dso__load_vmlinux+4 # ./perf probe -l probe_perf:dso__load_vmlinux (on 0x000000000006d2b4) --- Now the problem is fixed. Note: This bug is introduced by commit fb7345bbSigned-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140205051858.6519.27314.stgit@kbuild-fedora.yrl.intra.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 2月, 2014 8 次提交
-
-
由 Adrian Hunter 提交于
If the kernel is relocated at boot time, kallsyms will not match data recorded previously. That does not matter for modules because they are corrected anyway. It also does not matter if vmlinux is being used for symbols. But if perf tools has only kallsyms then the symbols will not match. Fix by applying the delta gained by comparing the old and current addresses of the relocation reference symbol. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-9-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Use of kcore is predicated upon it matching the recorded data. If the kernel has been relocated at boot time (i.e. since the data was recorded) then do not use kcore. Note that it is possible to make a copy of kcore at the time the data is recorded using 'perf buildid-cache'. Then the perf tools will use the copy because it does match the data. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-7-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Now that ref_reloc_sym is set up when the kernel map is created, 'perf record' does not need to pass the symbol names to perf_event__synthesize_kernel_mmap() which can read the values needed from ref_reloc_sym directly. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-6-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
The ref_reloc_sym is always needed for the kernel map in order to check for relocation. Consequently set it up when the kernel map is created. Otherwise it was only being set up by 'perf record'. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-5-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Separate out the logic used to make the kallsyms full path name for a machine. It will be reused in a subsequent patch. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-4-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Separate out the logic used to find the start address of the reference symbol used to track kernel relocation. kallsyms__get_function_start() is used in subsequent patches. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-3-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Adrian Hunter 提交于
Kernel maps map memory addresses to file offsets. For symbol annotation, objdump needs the object VMA addresses. For an unrelocated kernel, that is the same as the memory address. The addresses passed to objdump for symbol annotation did not take into account kernel relocation. This patch fixes that. Reported-by: NLinus Torvalds <torvalds@linux-foundation.org> Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Tested-by: NJiri Olsa <jolsa@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1391004884-10334-2-git-send-email-adrian.hunter@intel.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Francesco Fusco 提交于
Commit 71ae8aac ("lib: introduce arch optimized hash library") added an include to <linux/hash.h> for setting up an architecture specific fast hash. Since perf includes directly the non-uapi kernel header, it cannot find <asm/hash.h> on non-x86 and thus prevents perf to be compiled on every architecture other than x86. The problem is the inclusion of <asm/hash.h> in hash.h that results in the following error originating from util/evlist.c: fatal error: asm/hash.h: No such file or directory This commit simply adds an empty <asm/hash.h> stub/file to fix the compile issue on non-x86 architectures. As perf does not use any of these new functions, it fixes the compilation and therefore seems to be the most appropriate solution to go with. Signed-off-by: NFrancesco Fusco <ffusco@redhat.com> Link: http://lkml.kernel.org/r/2cf8143aad65a6aa6fe30325ef8a65847141afa2.1390829373.git.ffusco@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 27 1月, 2014 1 次提交
-
-
由 Avi Kivity 提交于
Some kernels contain C++ code, and thus their symbols need to be demangled. This allows 'perf kvm top' to generate readable output. Signed-off-by: NAvi Kivity <avi@cloudius-systems.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/26f71bf5bf7ee1408e3f1a803556d5df18223ef1.1390420726.git.avi@cloudius-systems.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 24 1月, 2014 1 次提交
-
-
由 Masami Hiramatsu 提交于
In map_groups__find_symbol() map->map_ip is used without ensuring the map is loaded. Then the address passed to map->map_ip isn't mapped at the first time. E.g. below code always fails to get a symbol at the first call; addr = /* Somewhere in the kernel text */ symbol_conf.try_vmlinux_path = true; symbol__init(); host_machine = machine__new_host(); sym = machine__find_kernel_function(host_machine, addr, NULL, NULL); /* Note that machine__find_kernel_function calls map_groups__find_symbol */ This ensures it by calling map__load before using it in map_groups__find_symbol(). Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140123022950.7206.17357.stgit@kbuild-fedora.yrl.intra.hitachi.co.jpSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 21 1月, 2014 6 次提交
-
-
由 Namhyung Kim 提交于
Gaurav reported that perf cannot profile JIT program if it executes the code on heap. This was because current map__new() only handle JIT on anon mappings - extends it to handle no_dso (heap, stack) case too. This patch assumes JIT profiling only provides dynamic function symbols so check the mapping type to distinguish the case. It'd provide no symbols for data mapping - if we need to support symbols on data mappings later it should be changed. Reported-by: NGaurav Jain <gjain@fb.com> Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Tested-by: NGaurav Jain <gjain@fb.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Gaurav Jain <gjain@fb.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1389836971-3549-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch fixes a memory corruption problem with the xyarray when the evsel fds get closed at the end of the run_perf_stat() call. It could be triggered with: # perf stat -a -e power/energy-cores/ ls When cpumask are used by events (.e.g, RAPL or uncores) then the evsel fds are allocated based on the actual number of CPUs monitored. That number can be smaller than the total number of CPUs on the system. The problem arises at the end by perf stat closes the fds twice. When fds are closed, their entry in the xyarray are set to -1. The first close() on the evsel is made from __run_perf_stat() and it uses the actual number of CPUS for the event which is how the xyarray was allocated for. The second is from perf_evlist_close() but that one is on the total number of CPUs in the system, so it assume the xyarray was allocated to cover it. However it was not, and some writes corrupt memory. The fix is in perf_evlist_close() is to first try with the evsel->cpus if present, if not use the evlist->cpus. That fixes the problem. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389972846-6566-3-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
No need to set evsel->fd to NULL after calling perf_evsel__free_fd(), as this method already does that. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-wu6kul8fpapr8iyqm685ewtf@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Alan Cox 提交于
Make the parsing robust. (perf has some other assumptions that BUFSIZE <= MAX_PATH which are not touched here) Reported-by: Jackie Chang Signed-off-by: NAlan Cox <alan@linux.intel.com> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/n/tip-g2uoiwbrpiimb63rx32qv8ne@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
This patch fixes a problem with the handling of the newly introduced optional event unit. The following cmdline caused a segfault: $ perf stat -e cpu/event-0x3c/ ls This patch fixes the problem with the default setting for alias->unit which was eventually causing the segfault. Signed-off-by: NStephane Eranian <eranian@google.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389972846-6566-2-git-send-email-eranian@google.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stanislav Fomichev 提交于
This method uses a temporary struct cpu_map to figure out the cpus present in the received cpu list in string form, but it failed to free it after returning. Fix it. Signed-off-by: NStanislav Fomichev <stfomichev@yandex-team.ru> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1390217980-22424-3-git-send-email-stfomichev@yandex-team.ru [ Use goto + err = -1 to do the delete just once, in the normal exit path ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 17 1月, 2014 6 次提交
-
-
由 Frederic Weisbecker 提交于
If a new callchain branch doesn't match a single entry of the node that it is given against comparison in append_chain(), then the cursor is expected to be at the same position as it was before the comparison loop. As such, there is no need to restore the cursor position on exit in case of non matching branches. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Reviewed-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-4-git-send-email-fweisbec@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Frederic Weisbecker 提交于
When a new callchain child branch matches an existing one in the rbtree, the comparison of its first entry is performed twice: 1) From append_chain_children() on branch lookup 2) If 1) reports a match, append_chain() then compares all entries of the new branch against the matching node in the rbtree, and this comparison includes the first entry of the new branch again. Lets shortcut this by performing the whole comparison only from append_chain() which then returns the result of the comparison between the first entry of the new branch and the iterating node in the rbtree. If the first entry matches, the lookup on the current level of siblings stops and propagates to the children of the matching nodes. This results in less comparisons performed by the CPU. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-3-git-send-email-fweisbec@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Frederic Weisbecker 提交于
The comm overriding API ignores memory allocation failures by silently keeping the previous and out of date comm. As a result, the user may get buggy events without ever being notified about the problem and its source. Lets start to fix this by propagating the error from the API. Not all callers may be doing proper error handling on comm set yet but this is the first step toward it. Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/1389713836-13375-2-git-send-email-fweisbec@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
Remove duplicated elf_section_by_name() functions from unwind.c and probe-event.c and use one exported elf_section_by_name() instance defined in symbol-elf.c. Note that this also moves get_text_start_address() to merge HAVE_DWARF_SUPPORT defined area. Reported-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140116093949.24403.38093.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
To fix a memory leak, release all dynamically allocated options/parameters in params data structure. This also introduces/exports some init/clear routines. Reported-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140116093947.24403.80118.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Masami Hiramatsu 提交于
To fix a memory leak, release all allocated probe_trace_event on the error path of try_to_find_probe_trace_events. Reported-by: NDavid Ahern <dsahern@gmail.com> Signed-off-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: "David A. Long" <dave.long@linaro.org> Cc: "Steven Rostedt (Red Hat)" <rostedt@goodmis.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: yrl.pp-manager.tt@hitachi.com Link: http://lkml.kernel.org/r/20140116093944.24403.30228.stgit@kbuild-fedora.novalocalSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 16 1月, 2014 5 次提交
-
-
由 Namhyung Kim 提交于
The hist_entry__add_cpumode_period() and hist_entry__decay() functions are dealing with hist_entry's stat fields only. Make them he_stat methods then. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arun Sharma <asharma@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1389677157-30513-5-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The report__resolve_callchain() can be shared with perf top code as it doesn't really depend on the perf report code. Factor it out as sample__resolve_callchain(). The same goes to the hist_entry__append_ callchain() too. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Arun Sharma <asharma@fb.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1389677157-30513-3-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The machine__resolve_callchain() is called only if symbol_conf. use_callchain is set so no need to check it again. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Rodrigo Campos <rodrigo@sdfg.com.ar> Link: http://lkml.kernel.org/r/1389677157-30513-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
The PEVENT_PLUGIN_UNLOADER function might need some cleanup using pevent like unregister some handlers. So pass pevent as argument. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Reviewed-by: NJiri Olsa <jolsa@redhat.com> Acked-by: NSteven Rostedt <rostedt@goodmis.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1389750340-15965-6-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
It failed to build perf on my ubuntu 10.04 box (gcc 4.4.3): CC util/strlist.o cc1: warnings being treated as errors util/strlist.c: In function ‘str_node__delete’: util/strlist.c:42: error: dereferencing type-punned pointer will break strict-aliasing rules util/strlist.c:42: error: dereferencing type-punned pointer will break strict-aliasing rules CC util/strfilter.o make: *** [util/strlist.o] Error 1 CC util/srcline.o cc1: warnings being treated as errors util/srcline.c: In function ‘addr2line_init’: util/srcline.c:132: error: dereferencing type-punned pointer will break strict-aliasing rules util/srcline.c:132: error: dereferencing type-punned pointer will break strict-aliasing rules util/srcline.c: In function ‘addr2line_cleanup’: util/srcline.c:143: error: dereferencing type-punned pointer will break strict-aliasing rules util/srcline.c:143: error: dereferencing type-punned pointer will break strict-aliasing rules make: *** [util/srcline.o] Error 1 It seems it only allows to remove 'const' qualifier. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1389276479-9047-1-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 15 1月, 2014 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
That is how the option summary describes it and so that we can free --delay to replace --initial-delay and then be consistent with stat's --delay equivalent option. Suggested-by: NIngo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-f8hd2010uhjl2zzb34hepbmi@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 14 1月, 2014 1 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
On a freshly installed system, after libelf-dev is installed we get: CC /tmp/build/perf/util/probe-event.o util/probe-event.c: In function ‘try_to_find_probe_trace_events’: util/probe-event.c:753:46: error: unused parameter ‘target’ [-Werror=unused-parameter] int max_tevs __maybe_unused, const char *target) ^ CC /tmp/build/perf/util/cgroup.o util/probe-event.c: At top level: util/probe-event.c:193:12: error: ‘get_text_start_address’ defined but not used [-Werror=unused-function] static int get_text_start_address(const char *exec, unsigned long *address) ^ cc1: all warnings being treated as errors make[1]: *** [/tmp/build/perf/util/probe-event.o] Error 1 make[1]: *** Waiting for unfinished jobs.... make: *** [install] Error 2 Fix it by enclosing functions only used when those libraries are installed under the suitable preprocessor define and using __maybe_unused to a function that is only built when DWARF support is disabled. Problem introduced in this changeset: commit fb7345bb Author: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Date: Thu Dec 26 05:41:53 2013 +0000 perf probe: Support basic dwarf-based operations on uprobe events Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-73kc2fopt81517hrdgdra18o@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 13 1月, 2014 8 次提交
-
-
由 Ramkumar Ramachandra 提交于
In $ perf diff -c ratio color the Ratio column using value_color_snprintf(), a new function that operates exactly like percent_color_snprintf(). At first glance, it looks like percent_color_snprintf() can be turned into a non-variadic function simplifying things; however, 53805eca (perf tools: Remove cast of non-variadic function to variadic, 2013-10-31) explains why it needs to be a variadic function. Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-4-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ramkumar Ramachandra 提交于
Make percent_color_snprintf() handle negative values correctly. Signed-off-by: NRamkumar Ramachandra <artagnon@gmail.com> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Link: http://lkml.kernel.org/r/1388388861-7931-2-git-send-email-artagnon@gmail.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Andi Kleen 提交于
perf stat has a --delay option to delay measuring the workload. This is useful to skip measuring the startup phase of the program, which is often very different from the main workload. The same is useful for perf record when sampling. --no-delay was already taken, so add a --initial-delay to perf record too. -D was already taken for record, so there is only a long option. v2: Don't disable group members (Namhyung Kim) v3: port to latest perf/core rename to --initial-delay to avoid conflict with --no-delay Signed-off-by: NAndi Kleen <ak@linux.intel.com> Acked-by: NNamhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1389476307-2124-1-git-send-email-andi@firstfloor.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Jean Pihet 提交于
Use the info only if it has been found in the .debug_frame section of the ELF binary. Signed-off-by: NJean Pihet <jean.pihet@linaro.org> Acked-by: NJiri Olsa <jolsa@redhat.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Will Deacon <will.deacon@arm.com> Cc: linaro-kernel@lists.linaro.org Cc: patches@linaro.org Link: http://lkml.kernel.org/r/1387212194-8028-1-git-send-email-jean.pihet@linaro.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
So that it can be shared with others like libtraceevent. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1389276059-8829-4-git-send-email-namhyung@kernel.org [ Added the new header to tools/perf/MANIFEST ] Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Namhyung Kim 提交于
So that it can be shared with others like libtraceevent. Signed-off-by: NNamhyung Kim <namhyung@kernel.org> Acked-by: NBorislav Petkov <bp@suse.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1389276059-8829-2-git-send-email-namhyung@kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
For the common evsel list traversal, so that it becomes more compact. Use the opportunity to start ditching the 'perf_' from 'perf_evlist__', as discussed, as the whole conversion touches a lot of places, lets do it piecemeal when we have the chance due to other work, like in this case. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-qnkx7dzm2h6m6uptkfk03ni6@git.kernel.orgSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Cody P Schafer 提交于
s/temr/term/ Signed-off-by: NCody P Schafer <cody@linux.vnet.ibm.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1389199434-21761-1-git-send-email-cody@linux.vnet.ibm.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-